Biomedical subjects

Eugene S Smotkin

Publications and source records attributed to Eugene S Smotkin.

6 recordsLinked to original sources

PubMed2006

PtRu nanoparticle electrocatalyst with bulk alloy properties prepared through a sonochemical method.

Properties of PtRu nanoparticles prepared using high-intensity sonochemistry are reported. Syntheses were carried out in tetrahydrofuran (THF) containing Ru3+ and Pt4+ in a fixed mole ratio of either 1:10 or 1:1. X-ray diffraction measurements confirmed sonocation produces an alloy phase and showed that the composition of the nanometer scale metal particles is close to the mole fraction of Ru3+ and Pt4+ in solution with deviations that tend toward Ru enrichment in the alloy phase. The materials gave responses that are similar in terms of peak potential and current density, referenced to the catalyst active surface area, to those of bulk alloys in voltammetry experiments involving CO stripping and CH3OH electrochemical oxidation in 0.1 M H2SO4. The results show that sonochemical methods have the potential to produce nanometer scale bimetallic electrocatalysts that possess alloy properties. The materials have application in mechanistic studies of fuel cell reactions and as platforms for the development of CO tolerant fuel cell catalyst.

Journal Article↗

PubMed2006

Pt and Ru X-ray absorption spectroscopy of PtRu anode catalysts in operating direct methanol fuel cells.

In situ X-ray absorption spectroscopy, ex situ X-ray fluorescence, and X-ray powder diffraction enabled detailed core analysis of phase segregated nanostructured PtRu anode catalysts in an operating direct methanol fuel cell (DMFC). No change in the core structures of the phase segregated catalyst was observed as the potential traversed the current onset potential of the DMFC. The methodology was exemplified using a Johnson Matthey unsupported PtRu (1:1) anode catalyst incorporated into a DMFC membrane electrode assembly. During DMFC operation the catalyst is essentially metallic with half of the Ru incorporated into a face-centered cubic (FCC) Pt alloy lattice and the remaining half in an amorphous phase. The extended X-ray absorption fine structure (EXAFS) analysis suggests that the FCC lattice is not fully disordered. The EXAFS indicates that the Ru-O bond lengths were significantly shorter than those reported for Ru-O of ruthenium oxides, suggesting that the phases in which the Ru resides in the catalysts are not similar to oxides.

Catalysis↗

PubMed2005

Activation of nanoparticle Pt-Ru fuel cell catalysts by heat treatment: a 195Pt NMR and electrochemical study.

(195)Pt NMR spectroscopic and electrochemical measurements were carried out on commercial Pt-Ru alloy nanoparticle samples to investigate the effect of high-temperature annealing in different vacuum/gas-phase environments. Samples annealed at 220 degrees C in Ar gas, or in a vacuum, did not show any demonstrable change in catalytic activity vs electrochemically reduced, room-temperature samples. In contrast, annealing at 220 degrees C in H(2) gas led to a 3-fold increase in reactivity toward methanol oxidation (per surface site). NMR experiments show that annealing at 220 degrees C (in both Ar and H(2)) leads to a slight reduction in the Fermi level local density of states (E(F)-LDOS) at the Pt sites, which we attribute to surface enrichment of Ru. This electronic effect alone, however, appears to be too small to account for the increase in the catalytic activity observed for the H-treated catalyst. By comparing the electrochemical and NMR data of the H- and Ar-treated samples, we conclude that annealing at 220 degrees C in the hydrogen atmosphere reduces surface Ru oxides into metallic Ru, and consequently, the presence of metallic Ru and its enrichment on the surface are essential for the enhanced catalytic activity. In contrast, heat treatment at 600 degrees C in both vacuum and argon atmosphere increases the particle size and reduces the amount of platinum on the nanoparticle surface, thereby increasing the surface Ru content beyond the optimum surface composition values. This causes a large reduction in catalytic activity. Our results suggest that optimizing the amount of surface Ru by heat treatment at temperatures near 200 degrees C, in a hydrogen atmosphere, can be utilized to produce Pt-Ru alloy nanoparticles with high methanol oxidation activity. Finally, our NMR and electrochemical data, taken together with the lattice parameter measurements, lead to a novel model of Pt-Ru alloy nanoparticles having a Ru-rich core and a Pt-Ru alloy overlayer.

Journal Article↗

PubMed2005

A band dispersion mechanism for Pt alloy compositional tuning of linear bound CO stretching frequencies.

The C-O stretching frequency (nu(CO)) of atop CO/Pt in PtRu alloys is compositionally tuned in proportion to the Pt mole percent. The application of a Blyholder-Bagus type mechanism (i.e., increased back-donation from the metal d-band to the hybridized 2pi CO molecular orbitals (MOs)) to compositional tuning has been paradoxical because (1) a Pt-C bond contraction, expected with increased back-donation as the Pt mole percent is reduced, is not observed (i.e., calculated Pt-C bond is either elongated or insensitive to alloying and the binding energies of CO/Pt decrease with alloying) and (2) the lowering d-band center and increased d-band vacancies upon alloying (suggesting less back-donation to the higher energy metal hybridized 2pi CO MOs) must be reconciled with the alloy-induced red shift of the nu(CO). A library of spin-optimized Pt and Pt alloy clusters was the basis of density functional theory (DFT) calculations of CO binding energies, nu(CO) values, shifts, and broadening of 5sigma/2pi CO MO upon hybridization with the alloy orbitals and a DFT derived Mulliken electron population analysis. The DFT results, combined with FEFF8 local density of states (LDOS) calculations, validate a 5sigma donation-2pi back-donation mechanism, reconciling the direction of alloy compositional tuning with the lowering of the d-band center and increased vacancies. Although the d-band center decreases in energy with alloying, an asymmetric increase in the dispersion of the d-band is accompanied by an upshift of the metal cluster HOMO level. Concomitantly, the hybridization and renormalization of the CO 5sigma/2pi states results in a broadening of the 5sigma/2pi manifold with additional lower energy states closer to the upshifted (with respect to the pure Pt cluster) HOMO of the alloy cluster. The dispersion toward higher energies of the alloy d-density of states results in more 5sigma/2pi CO filled states (i.e., enhanced 2pi-back-donation). Finally, Mulliken and FEFF8 electron population analysis shows that the increase of the average d-band vacancies upon alloying and additional 2pi back-donation are not mutually exclusive. The d-electron density of the CO-adsorbed Pt atom increases with alloying while the average d-electron density throughout the cluster is reduced. The localized electron density is manifested as an electrostatic wall effect, preventing the Pt-C bond contractions expected with increased back-donation to the 2pi CO MOs.

Journal Article↗

PubMed2002

Laser-activated membrane introduction mass spectrometry for high-throughput evaluation of bulk heterogeneous catalysts.

Laser-activated membrane introduction mass spectrometry (LAMIMS), a high-throughput screening method, evaluates heterogeneous catalysts under realistic reactor conditions. It is a precise, versatile system requiring no moving parts. The catalyst array is supported on carbon paper overlaid upon a silicone rubber membrane configured in a variation of membrane introduction mass spectrometry as introduced by Cooks. The carbon paper serves as a heat-dissipating gas diffusion layer that permits laser heating of catalyst samples far above the decomposition temperature of the polymer membrane that separates the array from the mass spectrometer vacuum chamber. A computer-controlled CO2 bar code writing laser is used for fine-tune heating of the catalyst spots above the base temperature of the LAMIMS reactor. The detailed design and performance of LAMIMS is demonstrated on arrays of "real world" bulk water-gas shift catalysts using natural and isotopically labeled reactor feed streams. A bulk catalyst array spot can be evaluated for activity and selectivity in as little as 1.5 min. All array screening results were confirmed by industrial microreactor evaluations.

Journal Article↗

PubMed2002

Synthesis and characterization of PtSn/carbon and Pt3Sn/carbon nanocomposites as methanol electrooxidation catalysts.

Two Pt-Sn/vulcan carbon nanocomposites containing nanoclusters of PtSn (niggliite) and Pt3Sn highly dispersed on a carbon powder support have been prepared using Pt(SnPh2Cl)(PPh3)2(Ph) or [Pt3[mu-(PPh2)2CH2]3(mu 3-SnF3) (mu 3-CO)][PF6] as single-source precursors of metal alloy. PtP2 or Pt metal is also present as a secondary phase. Bimetallic Pt-Sn nanoclusters with an average diameter of 5-8 nm are formed at a total metal loading of ca. 15 wt%. Evaluation of both Pt-Sn/C nanocomposites as electrooxidation catalysts in a direct methanol fuel cell gives fuel cell performances comparable to that expected for Pt-Sn catalysts prepared by more conventional methods.

Carbon↗