Biomedical subjects

Eva Nogales

Publications and source records attributed to Eva Nogales.

At least 19 recordsLinked to original sources

PubMed2007

Visualizing flexibility at molecular resolution: analysis of heterogeneity in single-particle electron microscopy reconstructions.

It is becoming increasingly clear that many macromolecules are intrinsically flexible and exist in multiple conformations in solution. Single-particle reconstruction of vitrified samples (cryo-electron microscopy, or cryo-EM) is uniquely positioned to visualize this conformational flexibility in its native state. Although heterogeneity remains a significant challenge in cryo-EM single-particle analysis, recent efforts in the field point to a future where it will be possible to tap into this rich source of biological information on a routine basis. In this article, we review the basic principles behind a few relatively new and generally applicable methods that show particular promise as tools to analyze macromolecular flexibility. We also discuss some of their recent applications to problems of biological interest.

Animals↗

PubMed2006

Nucleotide-dependent conformational changes in the DnaA-like core of the origin recognition complex.

Structural details of initiator proteins for DNA replication have provided clues to the molecular events in this process. EM reconstructions of the Drosophila melanogaster origin recognition complex (ORC) reveal nucleotide-dependent conformational changes in the core of the complex. All five AAA+ domains in ORC contain a conserved structural element that, in DnaA, promotes formation of a right-handed helix, indicating that helical AAA+ substructures may be a feature of all initiators. A DnaA helical pentamer can be docked into ORC, and the location of Orc5 uniquely positions this core. The results suggest that ATP-dependent conformational changes observed in ORC derive from reorientation of the AAA+ domains. By analogy to the DNA-wrapping activity of DnaA, we posit that ORC together with Cdc6 prepares origin DNA for helicase loading through mechanisms related to the established pathway of prokaryotes.

Adenosine Triphosphate↗

PubMed2006

The structural basis for regulated assembly and function of the transcriptional activator NtrC.

In two-component signal transduction, an input triggers phosphorylation of receiver domains that regulate the status of output modules. One such module is the AAA+ ATPase domain in bacterial enhancer-binding proteins that remodel the sigma(54) form of RNA polymerase. We report X-ray solution scattering and electron microscopy structures of the activated, full-length nitrogen-regulatory protein C (NtrC) showing a novel mechanism for regulation of AAA+ ATPase assembly via the juxtaposition of the receiver domains and ATPase ring. Accompanying the hydrolysis cycle that is required for transcriptional activation, we observed major order-disorder changes in the GAFTGA loops involved in sigma(54) binding, as well as in the DNA-binding domains.

Escherichia coli Proteins↗

PubMed2006

Structural mechanisms underlying nucleotide-dependent self-assembly of tubulin and its relatives.

The alphabeta-tubulin dimer assembles into microtubules, essential polymers in all eukaryotic cells. Microtubules are highly dynamic, a property that derives from tubulin's GTPase activity. Both the bacterial homolog, FtsZ, and the recently discovered bacterial tubulins from Prosthecobacter self-assemble in a nucleotide-dependent manner into protofilaments similar to those that form the microtubule wall. A number of structural studies of alphabeta-tubulin, gamma-tubulin (the isoform involved in microtubule nucleation), FtsZ and bacterial tubulin, in a variety of nucleotide and polymerization states, have been reported in the past few years. These studies have revealed the similarities and differences between these structures and their possible functional implications. In particular, a two-state mechanism has been proposed for the recycling of alphabeta-tubulin during the microtubule disassembly-assembly cycle; this mechanism may be unique to eukaryotic dimeric tubulin and the microtubule structure.

Animals↗

PubMed2006

Structural intermediates in microtubule assembly and disassembly: how and why?

Microtubules are cytoskeletal polymers made of repeating alphabeta-tubulin heterodimers that play essential roles in all eukaryotic cells. The complex dynamic behavior of microtubules, which is ultimately due to the tubulin subunit structure and its intrinsic GTPase activity, is key to the functions of these ubiquitous polymers. Microtubule assembly and disassembly do not take place by simple helical growth and shrinkage via individual subunits, but rather involve transient polymer intermediates, distinct from the microtubule, without parallel in other biological self-assembly systems. The discovery of these intermediates a decade ago has been followed recently by quantitative descriptions of their structure and their relationship to nucleotide state.

Animals↗

PubMed2006

The Dam1 kinetochore ring complex moves processively on depolymerizing microtubule ends.

Chromosomes interact through their kinetochores with microtubule plus ends and they are segregated to the spindle poles as the kinetochore microtubules shorten during anaphase A of mitosis. The molecular natures and identities of coupling proteins that allow microtubule depolymerization to pull chromosomes to poles during anaphase have long remained elusive. In budding yeast, the ten-protein Dam1 complex is a critical microtubule-binding component of the kinetochore that oligomerizes into a 50-nm ring around a microtubule in vitro. Here we show, with the use of a real-time, two-colour fluorescence microscopy assay, that the ring complex moves processively for several micrometres at the ends of depolymerizing microtubules without detaching from the lattice. Electron microscopic analysis of 'end-on views' revealed a 16-fold symmetry of the kinetochore rings. This out-of-register arrangement with respect to the 13-fold microtubule symmetry is consistent with a sliding mechanism based on an electrostatically coupled ring-microtubule interface. The Dam1 ring complex is a molecular device that can translate the force generated by microtubule depolymerization into movement along the lattice to facilitate chromosome segregation.

Cell Cycle Proteins↗

PubMed2006

Cryo-electron microscopy studies of human TFIID: conformational breathing in the integration of gene regulatory cues.

The multisubunit transcription factor TFIID is essential for directing eukaryotic promoter recognition and mediating interactions with activators/cofactors during assembly of the preinitiation complex. Despite its central role in transcription initiation and regulation, structural knowledge of the TFIID complex has so far been largely limited to electron microscopy studies of negatively stained samples. Here, we present a cryo-electron microscopy 3D reconstruction of the large endogenous human TFIID complex. The improved cryopreservation has allowed for a more detailed definition of the structural elements in the complex and for the detection, by an extensive statistical analysis of the data, of a conformational opening and closing of the cavity central to the TFIID architecture. We propose that these density rearrangements in the structure are a likely reflection of the plasticity of the interactions between TFIID and its many partner proteins.

Cryoelectron Microscopy↗

PubMed2006

Molecular architecture and conformational flexibility of human RNA polymerase II.

Transcription by RNA polymerase II (RNAPII) is a central process in eukaryotic gene regulation. While atomic details exist for the yeast RNAPII, characterization of the human complex lags behind, mostly due to the inability to obtain large quantities of purified material. Although the complexes have the same protein composition and high sequence similarity, understanding of transcription and of transcription-coupled DNA repair (TCR) in humans will require the use of human proteins in structural studies. We have used cryo-electron microscopy, image reconstruction, and variance analysis to characterize the structure and dynamics of human RNAPII (hRNAPII). Our studies show that hRNAPII in solution parallels the conformational flexibility of the yeast structures crystallized in different states but also illustrate a more extensive conformational range with potential biological significance. This hRNAPII study will serve as a structural platform to build up higher-order transcription and TCR complexes and to gain information that may be unique to the human RNAPII system.

Cryoelectron Microscopy↗

PubMed2005

The orthogonal tilt reconstruction method: an approach to generating single-class volumes with no missing cone for ab initio reconstruction of asymmetric particles.

Generating reliable initial models is a critical step in the reconstruction of asymmetric single-particles by 3D electron microscopy. This is particularly difficult to do if heterogeneity is present in the sample. The Random Conical Tilt (RCT) method, arguably the most robust presently to accomplish this task, requires significant user intervention to solve the "missing cone" problem. We present here a novel approach, termed the orthogonal tilt reconstruction method, that eliminates the missing cone altogether, making it possible for single-class volumes to be used directly as initial references in refinement without further processing. The method involves collecting data at +45 degrees and -45 degrees tilts and only requires that particles adopt a relatively large number of orientations on the grid. One tilted data set is used for alignment and classification and the other set--which provides views orthogonal to those in the first--is used for reconstruction, resulting in the absence of a missing cone. We have tested this method with synthetic data and compared its performance to that of the RCT method. We also propose a way of increasing the level of homogeneity in individual 2D classes (and volumes) in a heterogeneous data set and identifying the most homogeneous volumes.

DNA Polymerase I↗

PubMed2005

Structural roles for human translation factor eIF3 in initiation of protein synthesis.

Protein synthesis in mammalian cells requires initiation factor eIF3, a approximately 750-kilodalton complex that controls assembly of 40S ribosomal subunits on messenger RNAs (mRNAs) bearing either a 5'-cap or an internal ribosome entry site (IRES). Cryo-electron microscopy reconstructions show that eIF3, a five-lobed particle, interacts with the hepatitis C virus (HCV) IRES RNA and the 5'-cap binding complex eIF4F via the same domain. Detailed modeling of eIF3 and eIF4F onto the 40S ribosomal subunit reveals that eIF3 uses eIF4F or the HCV IRES in structurally similar ways to position the mRNA strand near the exit site of 40S, promoting initiation complex assembly.

Binding Sites↗

PubMed2005

Recognition of RNA polymerase II and transcription bubbles by XPG, CSB, and TFIIH: insights for transcription-coupled repair and Cockayne Syndrome.

Loss of a nonenzymatic function of XPG results in defective transcription-coupled repair (TCR), Cockayne syndrome (CS), and early death, but the molecular basis for these phenotypes is unknown. Mutation of CSB, CSA, or the TFIIH helicases XPB and XPD can also cause defective TCR and CS. We show that XPG interacts with elongating RNA polymerase II (RNAPII) in the cell and binds stalled RNAPII ternary complexes in vitro both independently and cooperatively with CSB. XPG binds transcription-sized DNA bubbles through two domains not required for incision and functionally interacts with CSB on these bubbles to stimulate its ATPase activity. Bound RNAPII blocks bubble incision by XPG, but an ATP hydrolysis-dependent process involving TFIIH creates access to the junction, allowing incision. Together, these results implicate coordinated recognition of stalled transcription by XPG and CSB in TCR initiation and suggest that TFIIH-dependent remodeling of stalled RNAPII without release may be sufficient to allow repair.

Adenosine Triphosphatases↗

PubMed2005

Assembly of GMPCPP-bound tubulin into helical ribbons and tubes and effect of colchicine.

Microtubule assembly and disassembly is a complex structural process that does not proceed by simple addition and subtraction of individual subunits to and from a helical polymer, as would be the case for actin and other helical assemblies. The dynamic process of microtubule growth and shrinking involves short-lasting polymer forms that differ substantially from the microtubule itself and constitute crucial assembly and disassembly intermediates. Structural characterization thus depends on the stabilization of these brief intermediates and their preservation as polymeric assemblies. This paper gives experimental details on the polymerization of GMPCPP-tubulin into low-temperature, stable polymers that we propose to correspond to the early stages in microtubule assembly, and includes new data on the effect of colchicine on GMPCPP-tubulin polymerization. Finally, we add our thoughts on the possible biological meaning of tubulin polymerization versatility.

Animals↗

PubMed2005

Nucleotide-dependent bending flexibility of tubulin regulates microtubule assembly.

The atomic structure of tubulin in a polymerized, straight protofilament is clearly distinct from that in a curved conformation bound to a cellular depolymerizer. The nucleotide contents are identical, and in both cases the conformation of the GTP-containing, intra-dimer interface is indistinguishable from the GDP-containing, inter-dimer contact. Here we present two structures corresponding to the start and end points in the microtubule polymerization and hydrolysis cycles that illustrate the consequences of nucleotide state on longitudinal and lateral assembly. In the absence of depolymerizers, GDP-bound tubulin shows distinctive intra-dimer and inter-dimer interactions and thus distinguishes the GTP and GDP interfaces. A cold-stable tubulin polymer with the non-hydrolysable GTP analogue GMPCPP, containing semi-conserved lateral interactions, supports a model in which the straightening of longitudinal interfaces happens sequentially, starting with a conformational change after GTP binding that straightens the dimer enough for the formation of lateral contacts into a non-tubular intermediate. Closure into a microtubule does not require GTP hydrolysis.

Cryoelectron Microscopy↗

PubMed2005

Formation of a dynamic kinetochore- microtubule interface through assembly of the Dam1 ring complex.

How kinetochore proteins form a dynamic interface with microtubules is largely unknown. In budding yeast, the 10-protein Dam1 complex is an Aurora kinase target that plays essential roles maintaining the integrity of the mitotic spindle and regulating interactions with the kinetochore. Here, we investigated the biochemical properties of purified Dam1 complex. The complex oligomerized into rings around microtubules. Ring formation was facilitated by microtubules but could occur in their absence. Mutant alleles led to partially assembled complexes or reduced microtubule binding. The interaction between rings and microtubules is mediated by the C termini of both Dam1 and alphabeta-tubulin. Ring formation promotes microtubule assembly, stabilizes against disassembly, and promotes bundling. A GTP-tubulin lattice is the preferred binding partner for the complex, and Dam1 rings can exhibit lateral mobility on microtubules. These observations suggest a mechanism by which the kinetochore can recognize and stay attached to the plus ends of microtubules.

Animals↗

PubMed2005

An iterative Fourier-Bessel algorithm for reconstruction of helical structures with severe Bessel overlap.

Classical Fourier-Bessel methodology fails when used to reconstruct helical structures with severe Bessel overlap on the layer lines. In the reconstruction of a peculiar type of double-layered helical tube of GDP-tubulin, we face the problem of Bessel overlap on all the layer lines due to the superposition of the Fourier components from the inner and outer layers of the tube. In order to decompose the Fourier terms of the inner and outer layers more than one image of the tubes must be combined and the orientations of their inner and outer layer helices must be determined. While there is no direct analytical method to determine these orientational parameters, we have devised an iterative Fourier-Bessel algorithm to calculate the correct orientations and thus allow us to obtain a reconstruction from multiple images of the double-layered tubes. The algorithm successfully works for the reconstruction of computer-modeled double-layered helical tubes as well as with real images obtained by cryo-electron microscopy. The algorithm has also been applied with very satisfactory results to the reconstruction of 13-protofilament microtubules, which is another helical structure that suffer Bessel overlap, suggesting its generality.

Algorithms↗

PubMed2005

Structural studies of the human PBAF chromatin-remodeling complex.

ATP-dependent chromatin remodeling is one of the central processes responsible for imparting fluidity to chromatin and thus regulating DNA transactions. Although knowledge on this process is accumulating rapidly, the basic mechanism (or mechanisms) by which the remodeling complexes alter the structure of a nucleosome is not yet understood. Structural information on these macromolecular machines should aid in interpreting the biochemical and genetic data; to this end, we have determined the structure of the human PBAF ATP-dependent chromatin-remodeling complex preserved in negative stain by electron microscopy and have mapped the nucleosome binding site using two-dimensional (2D) image analysis. PBAF has an overall C-shaped architecture--with a larger density to which two smaller knobs are attached--surrounding a central cavity; one of these knobs appears to be flexible and occupies different positions in each of the structures determined. The 2D analysis of PBAF:nucleosome complexes indicates that the nucleosome binds in the central cavity.

Binding Sites↗

PubMed2004

Tumor cells resistant to a microtubule-depolymerizing hemiasterlin analogue, HTI-286, have mutations in alpha- or beta-tubulin and increased microtubule stability.

Hemiasterlins are sponge-derived tripeptides that inhibit cell growth by depolymerizing existing microtubules and inhibiting microtubule assembly. Since hemiasterlins are poor substrates for P-glycoprotein, they are attractive candidates for cancer therapy and have been undergoing clinical trials. The basis of resistance to a synthetic analogue of hemiasterlin, HTI-286 (HTI), was examined in cell populations derived from ovarian carcinoma (A2780/1A9) cells selected in HTI-286. 1A9-HTI-resistant cells (1A9-HTI(R) series) were 57-89-fold resistant to HTI. Cross-resistance (3-186-fold) was observed to other tubulin depolymerizing drugs, with collateral sensitivity (2-14-fold) to tubulin polymerizing agents. Evaluation of the percentage of polymerized and soluble tubulin in 1A9 parental and 1A9-HTI(R) cells corroborated the HTI cytotoxicity data. At 22 degrees C or 37 degrees C, in the absence of any drug, the percentage of polymerized microtubules for each of the 1A9-HTI(R) populations was greater than that in the 1A9 parental cells, consistent with more stable microtubules. Furthermore, microtubules in the 1A9-HTI(R) populations were also more resistant to depolymerization at 4 degrees C and had more acetylated and detyrosinated (Glu-tubulin) alpha-tubulin, all characteristic of more stable microtubules. The 1A9-HTI(R) cell populations exhibited either a single nucleotide change in the M40 beta-tubulin isotype, S172A, or in two cell populations where no beta-tubulin mutation was detected, mutations in the Kalpha-1 alpha-tubulin isotype, S165P and R221H in one resistant cell population and I384V in another. Unlike reports of mutations resulting in reduced drug affinity, the experimental data and location of mutations are consistent with resistance to HTI-286 mediated by microtubule-stabilizing mutations in beta- or alpha-tubulin.

Acetylation↗

PubMed2003

Tubulin rings: which way do they curve?

Tubulin is known to exist in at least two main conformations: straight when bound to GTP or buried within the microtubule lattice, and curved when bound to GDP. The latter is most obvious during microtubule depolymerization, when protofilaments bend and peel off from microtubule ends. The curved, low-energy subunits form tantalizing ring structures in the presence of stabilizing divalent cations. Interestingly, cellular factors and antimitotic agents that act by depolymerizing microtubules can induce the formation of rings. In these rings, tubulin dimers generally appear kinked at the monomer-monomer interface, either to the same or to a lesser extent than at the dimer-dimer interface, with each agent giving rise to particular subtleties in the structures of the rings and the tubulin dimer itself that may reflect their distinctive mechanisms of action. How these kinks relate to what happens when the stored energy of GTP hydrolysis is released, freeing GDP*tubulin into an unconstrained state, remains an open question.

Binding Sites↗