Biomedical subjects

Eva Nordberg Karlsson

Publications and source records attributed to Eva Nordberg Karlsson.

16 recordsLinked to original sources

PubMed2006

Engineered xyloglucan specificity in a carbohydrate-binding module.

The field of plant cell wall biology is constantly growing and consequently so is the need for more sensitive and specific probes for individual wall components. Xyloglucan is a key polysaccharide widely distributed in the plant kingdom in both structural and storage tissues that exist in both fucosylated and non-fucosylated variants. Presently, the only xyloglucan marker available is the monoclonal antibody CCRC-M1 that is specific to terminal alpha-1,2-linked fucosyl residues on xyloglucan oligo- and polysaccharides. As a viable alternative to searches for natural binding proteins or creation of new monoclonal antibodies, an approach to select xyloglucan-specific binding proteins from a combinatorial library of the carbohydrate-binding module, CBM4-2, from xylanase Xyn10A of Rhodothermus marinus is described. Using phage display technology in combination with a chemoenzymatic method to anchor xyloglucan to solid supports, the selection of xyloglucan-binding modules with no detectable residual wild-type xylan and beta-glucan-binding ability was achieved.

Amino Acid Sequence↗

PubMed2006

Characterisation of two novel cyclodextrinases using on-line microdialysis sampling with high-performance anion exchange chromatography.

In this work, a real-time sampling/analytical method for on-line measurements of two newly discovered cyclomaltodextrinases (CDases) has been developed and evaluated. This novel methodology not only allows the final products to be investigated, but it also reveals enzyme-specific differences in the degradation pathways during the hydrolysis of different substrates, which is a great advantage in the important tasks of investigating the mechanisms of and classifying new hydrolases, and is an advantage that conventional techniques cannot offer. Two different enzymes, one CDase from Laceyella sacchari (LsCda13) and one from Anoxybacillus flavithermus (AfCda13), were investigated during the hydrolysis of alpha-, beta- and gamma-cyclodextrin, and the hydrolysis products were sampled via a microdialysis probe and injected on-line every 30 min into a high-performance anion exchange chromatography system equipped with a pulsed amperometric detector (HPAEC-PAD), where they were identified. The enzymes yielded the same end-products, maltose and glucose, in an approximate molar ratio of 2:1, but they exhibited distinctly different patterns of intermediate product formation before reaching the end-point. LsCda13 had a more random distribution of the intermediate products, whereas AfCda13 showed the distinct intermediate production of maltotriose, which in some cases accumulated.

Anion Exchange Resins↗

PubMed2006

Evolution of a carbohydrate binding module into a protein-specific binder.

A carbohydrate binding module, CBM4-2, derived from the xylanase (Xyn 10A) of Rhodothermus marinus has been used as a scaffold for molecular diversification. Its binding specificity has been evolved to recognise a quite different target, a human monoclonal IgG4. In order to understand the basis for this drastic change in specificity we have further investigated the target recognition of the IgG4-specific CBMs. Firstly, we defined that the structure target recognised by the selected CBM-variants was the protein and not the carbohydrates attached to the glycoprotein. We also identified key residues involved in the new specificity and/or responsible for the swap in specificity, from xylan to human IgG4. Specific changes present in all these CBMs included mutations not introduced in the design of the library from which the specific clones were selected. Reversion of such mutations led to a complete loss of binding to the target molecule, suggesting that they are critical for the recognition of human IgG4. Together with the mutations introduced at will, they had transformed the CBM scaffold into a protein binder. We have thus shown that the scaffold of CBM4-2 is able to harbour molecular recognition for either carbohydrate or protein structures.

Amino Acid Sequence↗

PubMed2005

Dimerisation and an increase in active site aromatic groups as adaptations to high temperatures: X-ray solution scattering and substrate-bound crystal structures of Rhodothermus marinus endoglucanase Cel12A.

Cellulose, a polysaccharide consisting of beta-1,4-linked glucose, is the major component of plant cell walls and consequently one of the most abundant biopolymers on earth. Carbohydrate polymers such as cellulose are molecules with vast diversity in structure and function, and a multiplicity of hydrolases operating in concert are required for depolymerisation. The bacterium Rhodothermus marinus, isolated from shallow water marine hot springs, produces a number of carbohydrate-degrading enzymes including a family 12 cellulase Cel12A. The structure of R.marinus Cel12A in the ligand-free form (at 1.54 angstroms) and structures of RmCel12A after crystals were soaked in cellopentaose for two different lengths of time, have been determined. The shorter soaked complex revealed the conformation of unhydrolysed cellotetraose, while cellopentaose had been degraded more completely during the longer soak. Comparison of these structures with those of mesophilic family 12 cellulases in complex with inhibitors and substrate revealed that RmCel12A has a more extensive aromatic network in the active site cleft which ejects products after hydrolysis. The substrate structure confirms that during hydrolysis by family 12 cellulases glucose does not pass through a (2,5)B conformation. Small-angle X-ray scattering analysis of RmCel12A showed that the enzyme forms a loosely associated antiparallel dimer in solution, which may target the enzyme to the antiparallel polymer strands in cellulose.

Binding Sites↗

PubMed2005

Production of a lipolytic enzyme originating from Bacillus halodurans LBB2 in the methylotrophic yeast Pichia pastoris.

A gene encoding a lipolytic enzyme amplified from the alkaliphilic bacterium Bacillus halodurans LBB2 was cloned into the pPICZalphaB vector and integrated into the genome of the protease deficient yeast strain Pichia pastoris SMD1168H. This previously undescribed enzyme was produced in active form, and cloning in frame with the Saccharomyces cerevisiae secretion signal (alpha-factor) enabled extracellular accumulation of correctly processed enzyme, with an apparent molecular mass of 30 kDa. In shake-flask cultivations, very low production levels were obtained, but these were significantly improved by use of a "batch-induced" cultivation technique which allowed a maximum enzyme activity of 14,000 U/l using p-nitrophenyl butyrate (C-4) as a substrate and a final extracellular lipolytic enzyme concentration of approximately 0.2 g/l. Partial characterization of the produced enzyme (at pH 9) revealed a preference for the short-chain ester (C-4) and significant but lower activity towards medium (C5-C6) and long (C16 and C18) fatty acid chain-length esters. In addition, the enzyme exhibited true lipase activity (7,300 U/l) using olive oil as substrate and significant levels of phospholipase activity (6,400 U/l) by use of a phosphatidylcholine substrate, but no lysophospholipase activity was detected using a lysophosphatidylcholine substrate.

Amino Acid Sequence↗

PubMed2005

Purification and characterisation of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079.

Bacteriocins are natural antimicrobial agents produced by food fermentative bacteria. Lactobacillus acidophilus DSM 20079 produces a small bacteriocin, with a molecular mass of 6.6 kDa, designated acidocin D20079. This antimicrobial peptide was extremely heat-stable (30 min at 121 degrees C) and was active over a wide pH range. It was found to be sensitive to proteolytic enzymes (trypsin, ficin, pepsin, papain, and proteinase K). Acidocin D20079 has a narrow inhibitory spectrum restricted to the genus Lactobacillus which includes L. sakei NCDO 2714, an organism known to cause anaerobic spoilage of vacuum-packaged meat. Maximum production of acidocin D20079 in MRS broth was detected at pH 6.0, and the peptide was purified by ammonium sulphate precipitation followed by sequential cation exchange and hydrophobic interaction chromatography. Purified acidocin D20079 spontaneously formed spherulite crystals during dialysis. As the N-terminus was found to be blocked for sequencing, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry was used to determine a partial sequence, and the molecular mass of the bacteriocin in the formed crystals (6.6 kDa). Estimates of the molecular weight of the partially purified peptide, using tricine-SDS-PAGE, in which bacteriocin activity was confirmed by overlayer techniques were in accordance with this value.

Amino Acid Sequence↗

PubMed2005

The methylotrophic yeast Pichia pastoris as a host for the expression and production of thermostable xylanase from the bacterium Rhodothermus marinus.

A thermostable glycoside hydrolase family-10 xylanase originating from Rhodothermus marinus was cloned and expressed in the methylotrophic yeast Pichia pastoris (SMD1168H). The DNA sequence from Rmxyn10A encoding the xylanase catalytic module was PCR-amplified and cloned in frame with the Saccharomyces cerevisiae alpha-factor secretion signal under the control of the alcohol oxidase (AOX1) promotor. Optimisation of enzyme production in batch fermentors, with methanol as a sole carbon source, enabled secretion yields up to 3gl(-1) xylanase with a maximum activity of 3130Ul(-1) to be achieved. N-terminal sequence analysis of the heterologous xylanase indicated that the secretion signal was correctly processed in P. pastoris and the molecular weight of 37kDa was in agreement with the theoretically calculated molecular mass. Introduction of a heat-pretreatment step was however necessary in order to fold the heterologous xylanase to an active state, and at the conditions used this step yielded a 200-fold increase in xylanase activity. Thermostability of the produced xylanase was monitored by differential-scanning calorimetry, and the transition temperature (T(m)) was 78 degrees C. R. marinus xylanase is the first reported thermostable gram-negative bacterial xylanase efficiently secreted by P. pastoris.

Amino Acid Sequence↗

PubMed2005

Optimized expression of soluble cyclomaltodextrinase of thermophilic origin in Escherichia coli by using a soluble fusion-tag and by tuning of inducer concentration.

Cyclomaltodextrinases are multidomain and often dimeric proteins from the alpha-amylase family (glycoside hydrolase family 13) which frequently have been very difficult to express in active form in Escherichia coli. To express the soluble form of this type of proteins in larger quantities the expression has to be optimized. We have used and combined two strategies to increase the yield of soluble recombinant cyclomaltodextrinase expressed from a gene originating from the thermophilic Gram-positive bacterium Anoxybacillus flavithermus. One strategy involved tuning of the inducer concentration while the other involved fusion of the gene encoding the target protein to the gene encoding the solubility-enhancing protein NusA. The enzyme activity could be increased 6-7 times solely by finely tuning the IPTG concentration, but the activity level was very sensitive to the amount of inducer applied. Hence, the IPTG concentration may have to be optimized for every protein under the conditions used. The fusion protein-strategy gave a slightly lower total activity but the level of soluble recombinant protein obtained was in this case significantly less sensitive to the inducer concentration applied. Moreover, the activity could be increased about 2-fold by cleaving off the solubility-tag (NusA) by enterokinase.

Cloning, Molecular↗

PubMed2005

Two novel cyclodextrin-degrading enzymes isolated from thermophilic bacteria have similar domain structures but differ in oligomeric state and activity profile.

In this paper, we present the expression and characterization of two novel enzymes from the alpha-amylase family exhibiting cyclomaltodextrinase specificity. The nucleotide sequences encoding the enzymes were isolated from the genomic DNA of two thermophilic bacterial strains originating from Icelandic hot springs and belonging to the genera Anoxybacillus (AfCda13) and Laceyella (LsCda13). The genes were amplified using a consensus primer strategy utilizing two of the four conserved regions present in glycoside hydrolase family 13. No identifiable signal peptides were present in open reading frames encoding the enzymes, indicating an intracellular location of both enzymes, and their physiological function to be intracellular cyclodextrin degradation. The domain structures of both enzymes were also similar, including an N-terminal domain, the catalytic module composed of the A- and B-domains, and a C-terminal domain. Despite the similarity in domain composition, the two enzymes displayed differences in the oligomeric state with AfCda13 being a dimeric protein, whereas LsCda13 was monomeric. The two enzymes also displayed significantly different activity profiles, despite being active on the same range of substrates. It was shown that the enzyme displaying the highest activity on cyclodextrin was dimeric (AfCda13). Moreover, a fraction of the dimeric enzyme could be converted to a monomeric state in the presence of KCl and this fraction retained only 23% of its activity on alpha-cyclodextrin while its activity on starch was not significantly affected, indicating that the oligomeric state is an important factor for a high activity on cyclodextrin substrates.

Amino Acid Sequence↗

PubMed2005

Effect of postinduction nutrient feed composition and use of lactose as inducer during production of thermostable xylanase in Escherichia coli glucose-limited fed-batch cultivations.

Escherichia coli is a microorganism routinely used in the production of heterologous proteins. The overexpression of a xylanase (Xyn 10 A Delta NC), which originated from the thermophile Rhodothermus marinus cloned under the control of the strong T7/lac promoter in a defined medium (mAT) using a substrate-limited feed strategy, was however shown to impose a significant metabolic burden on host cells. This resulted in a decreased cell growth rate and ultimately also a decreased target protein production. The investigation hence centers on the effect of some selected nutrient feed additives (amino acid [Cys] or TCA-intermediates [citrate, succinate, malate]) used to relieve the metabolic burden imposed during the feeding and postinduction phases of these glucose-limited fed-batch cultivations. The use of either succinic acid or malic acid as feed-additives resulted in an increase in production of approximately 40% of the heterologous thermostable xylanase. Furthermore, use of lactose as an alternative inducer of the T7/lac promoter was also proven to be a suitable strategy that significantly prolonged the heterologous protein production phase as compared with induction using isopropyl beta-D-thiogalactopyranoside (IPTG).

Bioreactors↗

PubMed2004

The modular xylanase Xyn10A from Rhodothermus marinus is cell-attached, and its C-terminal domain has several putative homologues among cell-attached proteins within the phylum Bacteroidetes.

Until recently, the function of the fifth domain of the thermostable modular xylanase Xyn10A from Rhodothermus marinus was unresolved. A putative homologue to this domain was however identified in a mannanase (Man26A) from the same microorganism which raised questions regarding a common function. An extensive search of all accessible data-bases as well as the partially sequenced genomes of R. marinus and Cytophaga hutchinsonii showed that homologues of this domain were encoded by multiple genes in microorganisms in the phylum Bacteroidetes. Moreover, the domain occurred invariably at the C-termini of proteins that were predominantly extra-cellular/cell attached. A primary structure motif of three conserved regions including structurally important glycines and a proline was also identified suggesting a conserved 3D fold. This bioinformatic evidence suggested a possible role of this domain in mediating cell attachment. To confirm this theory, R. marinus was grown, and activity assays showed that the major part of the xylanase activity was connected to whole cells. Moreover, immunocytochemical detection using a Xyn10A-specific antibody proved presence of Xyn10A on the R. marinus cell surface. In the light of this, a revision of experimental data present on both Xyn10A and Man26A was performed, and the results all indicate a cell-anchoring role of the domain, suggesting that this domain represents a novel type of module that mediates cell attachment in proteins originating from members of the phylum Bacteroidetes.

Amino Acid Sequence↗

PubMed2003

Probing the stability of the modular family 10 xylanase from Rhodothermus marinus.

The thermophilic bacterium Rhodothermus marinus produces a modular xylanase (Xyn10A) consisting of two N-terminal carbohydrate-binding modules (CBMs), followed by a domain of unknown function, and a catalytic module flanked by a fifth domain. Both Xyn10A CBMs bind calcium ions, and this study explores the effect of these ions on the stability of the full-length enzyme. Xyn10A and truncated forms thereof were produced and their thermostabilities were evaluated under different calcium loads. Studies performed using differential scanning calorimetry showed that the unfolding temperature of the Xyn10A was significantly dependent on the presence of Ca2+, and that the third domain of the enzyme binds at least one Ca2+. Thermal inactivation studies confirmed the role of tightly bound Ca2+ in stabilizing the enzyme, but showed that the presence of a large excess of this ion results in reduced kinetic stability. The truncated forms of Xyn10A were less stable than the full-length enzyme, indicative of module/domain thermostabilizing interactions. Finally, possible roles of the two domains of unknown function are discussed in the light of this study. This is the first report on the thermostabilizing role of calcium on a modular family 10 xylanase that displays multiple calcium binding in three of its five domains/modules.

Amino Acid Sequence↗

PubMed2002

Citrate synthase from Thermus aquaticus: a thermostable bacterial enzyme with a five-membered inter-subunit ionic network.

A bacterial thermostable citrate synthase has been analyzed to investigate the structural basis of its thermostability, and to compare such features with those previously identified in archaeal citrate synthases. The gene encoding the citrate synthase from Thermus aquaticus was identified from a gene library by screening with a PCR fragment amplified from genomic DNA using a primer based on the determined N-terminal amino acid sequence and a citrate synthase consensus primer. Apart from high sequence similarities with citrate synthase sequences within the Thermus/ Deinococcus group, the analyzed enzyme has highest similarities with the enzyme from the hyperthermophilic Archaeon Pyrococcus furiosus. The recombinant enzyme is a dimer with high specific activity. Compared to its thermoactivity (T(opt)at 80 degrees C), the thermal stability of the enzyme is high, as judged from its T(m) (101 degrees C), and from irreversible thermal inactivation assays. Molecular modeling of the structure revealed an inter-subunit ion-pair network, comparable in size to the network found in the citrate synthase from P. furiosus; these networks are discussed in relation to the high thermal stability of these bacterial and archaeal enzymes.

Amino Acid Sequence↗

PubMed2002

The structure of Rhodothermus marinus Cel12A, a highly thermostable family 12 endoglucanase, at 1.8 A resolution.

Cellulose is one of the most abundant polysaccharides in nature and microorganisms have developed a comprehensive system for enzymatic breakdown of this ubiquitous carbon source, a subject of much interest in the biotechnology industry. Rhodothermus marinus produces a hyperthermostable cellulase, with a temperature optimum of more than 90 degrees C, the structure of which is presented here to 1.8 A resolution. The enzyme has been classified into glycoside hydrolase family 12; this is the first structure of a thermophilic member of this family to have been solved. The beta-jelly roll fold observed has identical topology to those of the two mesophilic members of the family whose structures have been elucidated previously. A Hepes buffer molecule bound in the active site may have triggered a conformational change to an active configuration as the two catalytic residues Glu124 and Glu207, together with dependent residues, are observed in a conformation similar to that seen in the structure of Streptomyces lividans CelB2 complexed with an inhibitor. The structural similarity between this cellulase and the mesophilic enzymes serves to highlight features that may be responsible for its thermostability, chiefly an increase in ion pair number and the considerable stabilisation of a mobile region seen in S. lividans CelB2. Additional aromatic residues in the active site region may also contribute to the difference in thermophilicity.

Amino Acid Sequence↗

PubMed2002

The solution structure of the CBM4-2 carbohydrate binding module from a thermostable Rhodothermus marinus xylanase.

The solution structure is presented for the second family 4 carbohydrate binding module (CBM4-2) of xylanase 10A from the thermophilic bacterium Rhodothermus marinus. CBM4-2, which binds xylan tightly, has a beta-sandwich structure formed by 11 strands, and contains a prominent cleft. From NMR titrations, it is shown that the cleft is the binding site for xylan, and that the main amino acids interacting with xylan are Asn31, Tyr69, Glu72, Phe110, Arg115, and His146. Key liganding residues are Tyr69 and Phe110, which form stacking interactions with the sugar. It is suggested that the loops on which the rings are displayed can alter their conformation on substrate binding, which may have functional importance. Comparison both with other family 4 cellulose binding modules and with the structurally similar family 22 xylan binding module shows that the key aromatic residues are in similar positions, and that the bottom of the cleft is much more hydrophobic in the cellulose binding modules than the xylan binding proteins. It is concluded that substrate specificity is determined by a combination of ring orientation and the nature of the residues lining the bottom of the binding cleft.

Binding Sites↗

PubMed2002

Calcium binding and thermostability of carbohydrate binding module CBM4-2 of Xyn10A from Rhodothermus marinus.

Calcium binding to carbohydrate binding module CBM4-2 of xylanase 10A (Xyn10A) from Rhodothermus marinus was explored using calorimetry, NMR, fluorescence, and absorbance spectroscopy. CBM4-2 binds two calcium ions, one with moderate affinity and one with extremely high affinity. The moderate-affinity site has an association constant of (1.3 +/- 0.3) x 10(5) M(-1) and a binding enthalpy DeltaH(a) of -9.3 +/- 0.4 kJ x mol(-1), while the high-affinity site has an association constant of approximately 10(10) M(-1) and a binding enthalpy DeltaH(a) of -40.5 +/- 0.5 kJ x mol(-1). The locations of the binding sites have been identified by NMR and structural homology, and were verified by site-directed mutagenesis. The high-affinity site consists of the side chains of E11 and D160 and backbone carbonyls of E52 and K55, while the moderate-affinity site comprises the side chain of D29 and backbone carbonyls of L21, A22, V25, and W28. The high-affinity site is in a position analogous to the calcium site in CBM4 structures and in a recent CBM22 structure. Binding of calcium increases the unfolding temperature of the protein (T(m)) by approximately 23 degrees C at pH 7.5. No correlation between binding affinity and T(m) change was noted, as each of the two calcium ions contributes almost equally to the increase in unfolding temperature.

Binding Sites↗