PubMed Health⌕ Search

Biomedical subjects

F A Eiserling

Publications and source records attributed to F A Eiserling.

At least 37 records · Page 2Linked to original sources
PubMed1983

Bacteriophage SPO1 structure and morphogenesis. III. SPO1 proteins and synthesis.

The virion proteins of SPO1 have been determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis methods on purified phage components and on phage lysates. The phage head contains 16 proteins, and the connector or neck structure has an additional 3 proteins not found in the head. The proximal part of the tail, composed of sheath, tube and connecting components, contains six proteins. The distal baseplate is the most complex structure, with 28 proteins identifiable on sodium dodecyl sulfate gels. The maximum number of proteins found in phage subassemblies is 53, which would account for nearly half the coding capacity of the SPO1 genome.

Autoradiography↗
PubMed1982

Evidence for an internal component of the bacteriophage T4D tail core: a possible length-determining template.

The length of the T4 tail is precisely regulated in vivo at the time of polymerization of the tail core protein onto the baseplate. Since no mutations which alter tail length have been identified, a study of in vivo-assembled tail cores was begun to determine whether the structural properties of assembled cores would reveal the mechanism of length regulation. An assembly intermediate consisting of a core attached to a baseplate (core-baseplate) was purified from cells infected with a T4 mutant in gene 15. When core-base plates were treated with guanidine hydrochloride, cores were released from baseplates. The released cores had the same mean length as cores attached to baseplates. Electron micrographs of these cores showed partial penetration of negative stain into one end, and, at the opposite end, a modified tip which often appeared as a short fiber projecting from the core. When cores were purified and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, two minor proteins and the major core protein were detected. One minor protein, the product of gene 48 (gp48), was present in at least 72% of the amount found in core-baseplates, relative to the amount of the major core protein. These findings suggest that cores contain a fibrous structure, possibly composed of gp48, which may form a "ruler" that specifies the length of the T4 tail.

Guanidine↗
PubMed1981

A unique secondary folding pattern for 5S RNA corresponds to the lowest energy homologous secondary structure in 17 different prokaryotes.

A general secondary structure is proposed for the 5S RNA of prokaryotic ribosomes, based on helical energy filtering calculations. We have considered all secondary structures that are common to 17 different prokaryotic 5S RNAs and for each 5S sequence calculated the (global) minimum energy secondary structure (300,000 common structures are possible for each sequence). The 17 different minimum energy secondary structures all correspond, with minor differences, to a single, secondary structure model. This is strong evidence that this general 5S folding pattern corresponds to the secondary structure of the functional 5S rRNA. The general 5S secondary structure is forked and in analogy with the cloverleaf of tRNA is named the "wishbone" model. It constant 8 double helical regions; one in the stem, four in the first, or constant arm, and three in the second arm. Four of these double helical regions are present in a model earlier proposed (1) and four additional regions not proposed by them are presented here. In the minimum energy general structure, the four helices in the constant arm are exactly 15 nucleotide pairs long. These helices are stacked in the sequences from gram-positive bacteria and probably stacked in gram-negative sequences as well. In sequences from gram-positive bacteria the length of the constant arm is maintained at 15 stacked pairs by an unusual minimum energy interaction involving a C26-G57 base pair intercalated between two adjacent helical regions.

Bacteria↗
PubMed1978

The shape of L-arabinose isomerase from Escherichia coli.

L-Arabinose isomerase, EC 5.3.1.4, catalyzes the conversion of L-arabinose to L-ribulose, the first step in the catabolism of L-arabinose by Escherichia coli B/r. Patrick and Lee (1969) J. Biol. Chem. 244, 4277--4283) demonstrated that native L-arabinose isomerase is composed of six identical subunits of approximately Mr = 60,000. In this paper we describe an electron microscopy study of the arrangement of the six identical subunits. The isomerase is seen in two distinctly different orientations. The first has three subunits visible, with a 3-fold axis of symmetry, corresponding to a face-on view of two stacked, eclipsed trimers. The second orientation is rectangular in shape with 2-fold symmetry; suggesting a side-on view of the stacked trimers. The six identical subunits are thus arranged with D3 symmetry as in a trigonal prism. Measurements were made on the maximum profile of the three 2-fold axes of symmetry of the face-on orientations, and of both the long and short dimensions of the side-on orientation. The best estimate for the maximum profile of the 2-fold axes of symmetry of the face-on view is 106 +/- 8 A, using glutamine synthetase as an internal size standard. Measurements from micrographs of the isomerase alone, using an external magnification calibration, give the following results: for the maximum profile of the three 2-fold axes of symmetry of the face-on view, 132 +/- 7 A; for the long axis of the side-on view, 136 +/- 10 A; and for the short axis, 105 +/- 6 A. These measurements are consisting with the interpretation of the profiles as representing two different orientations of the L-arabinose isomerase.

Aldose-Ketose Isomerases↗
PubMed1978

The structural organization of DNA packaged within the heads of T4 wild-type, isometric and giant bacteriophages.

We present electron microscopic and X-ray diffraction evidence concerning the structural organization of condensed DNA within a series of T4 bacteriophage with the following head morphologies: prolate (wild-type), isometric and giant (with greatly increased axial ratio). In all cases, the DNA helix segments are locally parallel and 27 A apart. For the giant particles, we show that the DNA forms a large coil whose axis is perpendicular to the axis of the phage tail. This evidence, combined with previous results from a series of isometric bacteriophages (Earnshaw and Harrison, 1977), leads to a model for the organization of condensed DNA that may apply to most dsDNA-containing bacteriophages.

Coliphages↗
PubMed1976

Characterization and structural properties of the major biliproteins of Anabaena sp.

Studies are presented of the biliproteins of Anabaena sp. This filamentous cyanobacterium contains three major biliproteins. Whereas two of these, C-phycocyanin and allophycocyanin, are common to all cyanobacteria, the third, phycoerythrocyanin (gammamax approximately 568 nm) has hitherto not been described and its distribution among cyanobacteria appears to be limited. Anabaena variabilis and Anabaena sp. 6411 allophycocyanin, C-phycocyanin, and phycoerythrocyanin were purified to homogeneity and characterized with respect to molecular weight, isoelectric point, absorption spectrum and amino acid composition. The alpha and beta subunits of each of these proteins were also purified to homogeneity and characterized in the same manner. The tetrapyrrole chromophore content was determined for each of the proteins and subunits. The alpha subunit of phycoerythrocyanin carries a novel phycobiliviolin-like chromophore. This chromophore has not previously been detected in cyanobacterial biliproteins, but has been noted as a prosthetic group of a cryptophytan phycocyanin. Sedimentation equilibrium studies show that at pH 7.0, at protein concentrations of 0.2-0.6 mg/ml, allophycocyanin, C-phycocyanin and phycoerythrocyanin, each exists as a trimeric aggregate, (alphabeta)3, of molecular weight of approximately 105000. Structrual studies of microcrystals of these three biliproteins by electron microscopy and X-ray diffraction reveal a common plan for the construction of higher assembly forms. The major building block appears to be the trimer (alphabeta)3. It is proposed that this is a disc-like structure about 3.0 X 12.0 nm. The individual alpha or beta subunits are roughly spherical, 3 nm in diameter. Allophycocyanin trimers stack to form bundles of rods which form long needles. Both phycocyanin and phycoerythrocyanin form double discs (alphabeta)6 which are visible as ring-shaped structures by electron microscopy. The mode of assembly of the biliprotein structures in the phycobilisome is, as yet, unknown.

Amino Acids↗
PubMed1975

Glutamine synthetase forms three- and seven-stranded helical cables.

When cobaltous ion is bound to glutamine synthetase [L-glutamate:ammonia ligase (ADP-forming), EC 6.3.1.2], the two-layered hexagonal molecules polymerize face-to-face, to form long strands. The strands then wind round each other to form three- and seven-stranded cables. The structures of these cables are not immediately evident from electron micrographs because of the confusing superposition of front and back portions of the cables. But optical diffraction and filtering by the procedure of Klug and DeRosier leads to interpretable images of the cables. Because a micrograph of the seven-stranded cable contains 24 views of the glutamine synthetase molecule, it is possible to reconstruct the three-dimensional electron density of a cable and its constituent molecules at a resolution of 30--50 A. This reconstruction confirms that the symmetry of a glutamine synthetase molecule is D6. It suggests that the single subunit is an oblate ellipsoid with its minor axis (about 48 A) roughly parallel to the 6-fold axis of the molecule and its major axis (about 63 A) perpendicular to the 6-fold axis of the molecule. The subunits of the two hexagonal layers of a molecule are eclipsed. Neighboring molecules along a strand also have their hexagonal faces together, but they are rotated about the strand axis by about 7 degrees with respect to one another, rather than being eclipsed. Six outer strands are coiled about a straight central strand, and each forms identical contacts with the central strand. Moreover, these contacts between central and outer strands are apparently similar to the contacts between neighboring outer strands.

Cobalt↗
PubMed1973

Genetic control of capsid length in bacteriophage T4. I. Isolation and preliminary description of four new mutants.

Four new mutants are described whose phenotypic expression affects the length of the head of bacteriophage T4D. All mutants produce some phenotypically normal phage particles. Mutant pt21-34 also produces at least two size classes of phage particle which have heads that are shorter than normal. The other three mutants, ptg19-2, ptg19-80, and ptg191, produce, in addition to phages with normal and with shorter-than-normal heads, giant phages with heads from 1.5 to at least 10 times the normal length. All mutations are clustered near gene 23. Giant phage particles have the following properties: they are infectious and contain and inject multiple genomes as a single continuous bihelical DNA molecule of greater-than-unit length. Their frequency, relative to the total plaque-former population, increases late in the infectious cycle. They have a normal diameter, variable length, and a buoyant density range in CsCl from equal to slightly greater than that of normal phage. The arrangement of capsomers is visible in the capsids, which are composed of cleaved gene 23 protein.

Centrifugation, Density Gradient↗
PubMed1972

Bacteriochlorophyll Synthesis and the Ultrastructure of Wild Type and Mutant Strains of Rhodopseudomonas spheroides.

The ultrastructure of sectioned cells of mutant and wild type Rhodopseudomonas spheroides has been examined by electron microscopy. The characteristic vesicles associated with the presence of bacteriochlorophyll were found in wild type cells grown with low aeration. These were also found in mutant TA-R which forms bacteriochlorophyll under high aeration. None of the mutants with blocks in bacteriochlorophyll synthesis contained intracytoplasmic membrane. These included mutant 8-17 which accumulates bacteriochlorophyllide but fails at the phytolation step. We conclude that the intact bacteriochlorophyll molecule, or some particular membrane protein associated with it, is needed for the development of the characteristic intracytoplasmic membrane system in R. spheroides.

Journal Article↗
PubMed1971

Eletron microscopic observations on the structure of Treponema zuelzerae and its axial filaments.

The fine structure of the spirochete Treponema zuelzerae, and particularly of its axial filaments, was investigated by using the electron microscope. The cell consists of a protoplasmic core surrounded by two concentric envelopes, each approximately 12 nm in width. Between these envelopes are two axial filaments, one originating at each pole of the cell, which overlap and lie side by side in the central region of the cell. The diameter of the axial filaments is 18.0 to 18.5 nm. The terminal region of each filament at its proximal end consists of a hook-like structure, very similar in appearance to the proximal end of a bacterial flagellum. The outer envelope of the cell is readily disrupted with distilled water, and this treatment often results in the release of the filaments from their axial position. A sheath is seen surrounding the filaments when cells are treated with distilled water for no more than 1 min and fixed immediately with osmium tetroxide or glutaraldehyde. This sheath has a striated fine structure and a diameter of 46 nm.

Acetates↗