PubMed Health⌕ Search

Biomedical subjects

F A Goldbaum

Publications and source records attributed to F A Goldbaum.

At least 19 recordsLinked to original sources

Multiple display of a protein domain on a bacterial polymeric scaffold.

The multiple display of protein domains on polymeric scaffolds is an emerging technology for many applications. BLS is a highly immunogenic protein that has an oligomeric structure formed by a 17.2 kDa subunit arranged as a dimer of pentamers. Here we describe the production as well as the structural, functional, and immunological properties of a 9 kDa double-stranded RNA-binding domain (RBD3) fused to the structure of BLS. We demonstrate that the BLS and RBD3 modules are stably and independently folded in the structure of the chimera and form a decameric structure of 255 kDa as the native BLS oligomers. The polymeric display of RBD3 in the structure of BLS increases the dsRNA binding strength of this domain both in vitro and in vivo, and also enhances its immunogenicity to the point that it breaks the tolerance of mice to the RBD3 self-antigen. Our results underscore the BLS display strategy as a powerful tool for biotechnological and therapeutic applications.

Animals↗

Engineering of a polymeric bacterial protein as a scaffold for the multiple display of peptides.

Protein assemblies with a high degree of repetitiveness and organization are known to induce strong immune responses. For that reason they have been postulated for the design of subunit vaccines by means of protein engineering. The enzyme lumazine synthase from Brucella spp. (BLS) is highly immunogenic, presumably owing to its homodecameric arrangement and remarkable thermodynamic stability. Structural analysis has shown that it is possible to insert foreign peptides at the ten amino terminus of BLS without disrupting its general folding. These peptides would be displayed to the immune system in a highly symmetric three-dimensional array. In the present work, BLS has been used as a protein carrier of foreign peptides. We have established a modular system to produce chimeric proteins decorated with ten copies of a desired peptide as long as 27 residues and have shown that their folding and stability is similar to that of the wild-type protein. The knowledge about the mechanisms of dissociation and unfolding of BLS allowed the engineering of polyvalent chimeras displaying different predefined peptides on the same molecular scaffold. Moreover, the reassembly of mixtures of chimeras at different steps of the unfolding process was used to control the stoichiometry and spatial arrangement for the simultaneous display of different peptides on BLS. This strategy would be useful for vaccine development and other biomedical applications.

Amino Acid Sequence↗

Generation of sequence-specific, high affinity anti-DNA antibodies.

By taking advantage of the extreme stability of a protein-DNA complex, we have obtained two highly specific monoclonal antibodies against a predetermined palindromic DNA sequence corresponding to the binding site of the E2 transcriptional regulator of the human papillomavirus (HPV-16). The purified univalent antibody fragments bind to a double-stranded DNA oligonucleotide corresponding to the E2 binding site in solution with dissociation constants in the low and subnanomolar range. This affinity matches that of the natural DNA binding domain and is severalfold higher than the affinity of a homologous bovine E2 C-terminal domain (BPV-1) for the same DNA. These antibodies discriminate effectively among a number of double- and single-stranded synthetic DNAs with factors ranging from 125- to 20,000-fold the dissociation constant of the specific DNA sequence used in the immunogenic protein-DNA complex. Moreover, they are capable of fine specificity tuning, since they both bind less tightly to another HPV-16 E2 binding site, differing in only 1 base pair in a noncontact flexible region. Beyond the relevance of obtaining a specific anti-DNA response, these results provide a first glance at how DNA as an antigen is recognized specifically by an antibody. The accuracy of the spectroscopic method used for the binding analysis suggests that a detailed mechanistic analysis is attainable.

Amino Acid Sequence↗

Three-dimensional structure of the Fab from a human IgM cold agglutinin.

Cold agglutinins (CAs) are IgM autoantibodies characterized by their ability to agglutinate in vitro RBC at low temperatures. These autoantibodies cause hemolytic anemia in patients with CA disease. Many diverse Ags are recognized by CAs, most frequently those belonging to the I/i system. These are oligosaccharides composed of repeated units of N:-acetyllactosamine, expressed on RBC. The three-dimensional structure of the Fab of KAU, a human monoclonal IgM CA with anti-I activity, was determined. The KAU combining site shows an extended cavity and a neighboring pocket. Residues from the hypervariable loops V(H)CDR3, V(L)CDR1, and V(L)CDR3 form the cavity, whereas the small pocket is defined essentially by residues from the hypervariable loops V(H)CDR1 and V(H)CDR2. This fact could explain the V(H)4-34 germline gene restriction among CA. The KAU combining site topography is consistent with one that binds a polysaccharide. The combining site overall dimensions are 15 A wide and 24 A long. Conservation of key binding site residues among anti-I/i CAs indicates that this is a common feature of this family of autoantibodies. We also describe the first high resolution structure of the human IgM C(H)1:C(L) domain. The structural analysis shows that the C(H)1-C(L) interface is mainly conserved during the isotype switch process from IgM to IgG1.

Agglutinins↗

Distinctive cognate sequence discrimination, bound DNA conformation, and binding modes in the E2 C-terminal domains from prototype human and bovine papillomaviruses.

The C-terminal DNA binding domain of the E2 protein is involved in transcriptional regulation and DNA replication in papillomaviruses. At low ionic strength, the domain has a tendency to form aggregates, a process readily reversible by the addition of salt. While fluorescence anisotropy measurements show a 1:1 stoichiometry at pH 5.5, we observed that a second HPV-16 E2 C-terminal dimer can bind per DNA site at pH 7.0. This was confirmed by displacement of bis-ANS binding, tryptophan fluorescence, native electrophoresis, and circular dichroism. The two binding events are nonequivalent, with a high-affinity binding involving one E2C dimer per DNA molecule with a K(D) of 0.18 +/- 0.02 nM and a lower affinity binding mode of 2.0 +/- 0.2 nM. The bovine (BPV-1) E2 C-terminal domain binds to an HPV-16 E2 site with 350-fold lower affinity than the human cognate domain and binds 7-fold less tightly even to a bovine-derived DNA site. The ability to discriminate between cognate and noncognate sequences is 50-fold higher for the human domain, and the latter is 180-fold better than the bovine at discriminating specific from nonspecific DNA. A substantial conformational change in bound DNA is observed by near-UV circular dichroism. The bovine domain imposes a different DNA conformation than that caused by the human counterpart, which could be explained by a more pronounced bent. Structure-function differences and biochemical properties of the complexes depend on the protein domain rather than on the DNA, in line with crystallographic evidence. Despite the strong sequence homology and overall folding topology, the differences observed may explain the distinctive transcriptional regulation in bovine and human viruses.

Adenovirus E2 Proteins↗

X-ray crystal structure of an anti-Buckminsterfullerene antibody fab fragment: biomolecular recognition of C(60).

We have prepared a monoclonal Buckminsterfullerene specific antibody and report the sequences of its light and heavy chains. We also show, by x-ray crystallographic analysis of the Fab fragment and by model building, that the fullerene binding site is formed by the interface of the antibody light and heavy chains. Shape-complementary clustering of hydrophobic amino acids, several of which participate in putative stacking interactions with fullerene, form the binding site. Moreover, an induced fit mechanism appears to participate in the fullerene binding process. Affinity of the antibody-fullerene complex is 22 nM as measured by competitive binding. These findings should be applicable not only to the use of antibodies to assay and direct potential fullerene-based drug design but could also lead to new methodologies for the production of fullerene derivatives and nanotubes as well.

Amino Acid Sequence↗

Divergence in macromolecular assembly: X-ray crystallographic structure analysis of lumazine synthase from Brucella abortus.

We have determined the three-dimensional structure of 6, 7-dimethyl-8-ribityllumazine synthase (lumazine synthase) from Brucella abortus, the infectious organism of the disease brucellosis in animals. This enzyme catalyses the formation of 6, 7-dimethyl-8-ribityllumazine, the penultimate product in the synthesis of riboflavin. The three-dimensional X-ray crystal structure of the enzyme from B. abortus has been solved and refined at 2.7 A resolution to a final R-value of 0.18 (R(free)=0.23). The macromolecular assembly of the enzyme differs from that of the enzyme from Bacillus subtilis, the only other lumazine synthase structure known. While the protein from B. subtilis assembles into a 60 subunit icosahedral capsid built from 12 pentameric units, the enzyme from B. abortus is pentameric in its crystalline form. Nonetheless, the active sites of the two enzymes are virtually identical indicating inhibitors to theses enzymes could be effective pharmaceuticals across a broad species range. Furthermore, we compare the structures of the enzyme from B. subtilis and B. abortus and describe the C teminus structure which accounts for the differences in quaternary structure.

Bacillus subtilis↗

Structural, functional and immunological studies on a polymeric bacterial protein.

The characterization of proteins from Brucella spp, the causative agent of brucellosis, has been the subject of intensive research. We have described an 18-kDa cytoplasmic protein of Brucella abortus and shown the potential usefulness of this protein as an antigen for the serologic diagnosis of brucellosis. The amino acid sequence of the protein showed a low but significant homology with that of lumazine synthases. Lumazine is an intermediate product in bacterial riboflavin biosynthesis. The recombinant form of the 18-kDa protein (expressed in E. coli) folds like the native Brucella protein and has lumazine-synthase enzymatic activity. Three-dimensional analysis by X-ray crystallography of the homolog Bacillus subtilis lumazine synthase has revealed that the enzyme forms an icosahedral capsid. Recombinant lumazine synthase from B. abortus was crystallized, diffracted X rays to 2.7-A resolution at room temperature, and the structure successfully solved by molecular replacement procedures. The macromolecular assembly of the enzyme differs from that of the enzyme from B. subtilis. The Brucella enzyme remains pentameric (90 kDa) in its crystallographic form. Nonetheless, the active sites of the two enzymes are virtually identical at the structural level, indicating that inhibitors of these enzymes could be viable pharmaceuticals across a broad species range. We describe the structural reasons for the differences in their quaternary arrangement and also discuss the potential use of this protein as a target for the development of acellular vaccines.

Animals↗

Lack of significant differences in association rates and affinities of antibodies from short-term and long-term responses to hen egg lysozyme.

The affinities (Ka) and association rate constants (kon) of 23 mouse (BALB/c) anti-lysozyme mAbs obtained after short and prolonged immunizations have been measured by plasmon resonance techniques. The affinities for the 23 Abs, measured using their Fab, range from Ka = 1.1 x 10(7) to 1.4 x 10(10) M-1. There is no significant correlation between time or dose of immunization and affinity or association rates, indicating no time- or dose-dependent maturation of the response within the doses and times that were explored. IgMs are produced early and late in the response, with intrinsic affinities <10(5) M-1. Two independently derived mAbs, D44.1 (short term) and F10.6.6 (from a longer term response), result from identical or nearly identical somatic recombination events of germline gene segments. F10.6.6 has more mutations and a higher affinity constant (Ka = 1.4 x 10(10) M-1) than D44.1 (Ka = 1.1 x 10(7) M-1). Although higher affinities may result from an accumulation of mutations, they do not correlate with the length and dose of immunogenic challenge.

Animals↗

Crystallization and preliminary x-ray diffraction analysis of the lumazine synthase from Brucella abortus.

Lumazine synthase from Brucella abortus was overexpressed in Escherichia coli, refolded, and purified to apparent homogeneity. Crystals of lumazine synthase were grown by the hanging drop vapor diffusion method using polyethylene glycol 8000 or ammonium sulfate as precipitants. They belong to the trigonal space group P321 with cell parameters a = b = 132.00A, c = 167.25 A. A complete diffraction data set to 3.7 A resolution has been collected using synchrotron radiation. Preliminary analysis of the quaternary structure of this protein by means of a self-rotation function calculated with the diffraction data clearly indicates 532 symmetry compatible with the presence of an icosahedral lumazine synthase particle.

Amino Acid Sequence↗

Characterization of anti-anti-idiotypic antibodies that bind antigen and an anti-idiotype.

Two mouse monoclonal anti-anti-idiotopic antibodies (anti-anti-Id, Ab3), AF14 and AF52, were prepared by immunizing BALB/c mice with rabbit polyclonal anti-idiotypic antibodies (anti-Id, Ab2) raised against antibody D1.3 (Ab1) specific for the antigen hen egg lysozyme. AF14 and AF52 react with an "internal image" monoclonal mouse anti-Id antibody E5.2 (Ab2), previously raised against D1.3, with affinity constants (1.0 x 10(9) M-1 and 2.4 x 10(7) M-1, respectively) usually observed in secondary responses against protein antigens. They also react with the antigen but with lower affinity (1.8 x 10(6) M-1 and 3.8 x 10(6) M-1). This pattern of affinities for the anti-Id and for the antigen also was displayed by the sera of the immunized mice. The amino acid sequences of AF14 and AF52 are very close to that of D1.3. In particular, the amino acid side chains that contribute to contacts with both antigen and anti-Id are largely conserved in AF14 and AF52 compared with D1.3. Therapeutic immunizations against different pathogenic antigens using anti-Id antibodies have been proposed. Our experiments show that a response to an anti-Id immunogen elicits anti-anti-Id antibodies that are optimized for binding the anti-Id antibodies rather than the antigen.

Amino Acid Sequence↗

Hydrogen bonding and solvent structure in an antigen-antibody interface. Crystal structures and thermodynamic characterization of three Fv mutants complexed with lysozyme.

Using site-directed mutagenesis, X-ray crystallography, and titration calorimetry, we have examined the structural and thermodynamic consequences of removing specific hydrogen bonds in an antigen-antibody interface. Crystal structures of three antibody FvD1.3 mutants, VLTyr50Ser (VLY50S), VHTyr32Ala (VHY32A), and VHTyr101Phe (VHY101F), bound to hen egg white lysozyme (HEL) have been determined at resolutions ranging from 1.85 to 2.10 A. In the wild-type (WT) FvD1.3-HEL complex, the hydroxyl groups of VLTyr50, VHTyr32, and VHTyr101 each form at least one hydrogen bond with the lysozyme antigen. Thermodynamic parameters for antibody-antigen association have been measured using isothermal titration calorimetry, giving equilibrium binding constants Kb (M-1) of 2.6 x 10(7) (VLY50S), 7.0 x 10(7) (VHY32A), and 4.0 x 10(6) (VHY101F). For the WT complex, Kb is 2.7 x 10(8) M-1; thus, the affinities of the mutant Fv fragments for HEL are 10-, 4-, and 70-fold lower than that of the original antibody, respectively. In all three cases entropy compensation results in an affinity loss that would otherwise be larger. Comparison of the three mutant crystal structures with the WT structure demonstrates that the removal of direct antigen-antibody hydrogen bonds results in minimal shifts in the positions of the remaining protein atoms. These observations show that this complex is considerably tolerant, both structurally and thermodynamically, to the truncation of antibody side chains that form hydrogen bonds with the antigen. Alterations in interface solvent structure for two of the mutant complexes (VLY50S and VHY32A) appear to compensate for the unfavorable enthalpy changes when protein-protein interactions are removed. These changes in solvent structure, along with the increased mobility of side chains near the mutation site, probably contribute to the observed entropy compensation. For the VHY101F complex, the nature of the large entropy compensation is not evident from a structural comparison of the WT and mutant complexes. Differences in the local structure and dynamics of the uncomplexed Fv molecules may account for the entropic discrepancy in this case.

Antigen-Antibody Complex↗

Crystal structure of an Fv-Fv idiotope-anti-idiotope complex at 1.9 A resolution.

Anti-idiotopic antibodies react with unique antigenic features, usually associated with the combining sites, of other antibodies. They may thus mimic specific antigens that react with the same antibodies. The structural basis of this mimicry is analyzed here in detail for an anti-idiotopic antibody that mimics the antigen, hen egg-white lysozyme. The crystal structure of an anti-hen-egg-white lysozyme antibody (D1.3) complexed with an anti-idiotopic antibody (E5.2) has been determined at a nominal resolution of 1.9 A. E5.2 contacts substantially the same residues of D1.3 as lysozyme, thus mimicking its binding to D1.3. The mimicry embodies conservation of hydrogen bonding: six of the 14 protein-protein hydrogen bonds bridging D1.3-E5.2 are structurally equivalent to hydrogen bonds bridging D1.3-lysozyme. The mimicry includes a similar number of van der Waals interactions. The mimicry of E5.2 for lysozyme, however, does not extend to the topology of the non-polar surfaces of E5.2 and lysozyme, which are in contact with D1.3 as revealed by a quantitative analysis of the contacting surface similarities between E5.2 and lysozyme. The structure discussed herein shows that an anti-idiotopic antibody can provide an approximate topological and binding-group mimicry of an external antigen, especially in the case of the hydrophilic surfaces, even though there is no sequence homology between the anti-idiotope and the antigen.

Animals↗

Crystal structure of the complex of the variable domain of antibody D1.3 and turkey egg white lysozyme: a novel conformational change in antibody CDR-L3 selects for antigen.

The crystal structure of the Fv fragment of the murine monoclonal anti-lysozyme antibody D1.3, complexed with turkey egg-white lysozyme (TEL), is presented. D1.3 (IgG1, kappa) is a secondary response antibody specific for hen egg-white lysozyme (HEL). TEL and HEL are homologous and differ in amino acid sequence in the antibody-antigen interface only at position 121. The side-chain of HEL residue Gln121 makes a pair of hydrogen bonds to main-chain atoms of the antibody light chain. In the D1.3-TEL structure, TEL residue His121 makes only one hydrogen bond with the light chain as a result of 129 degree and 145 degree change in peptide torsion angles for residues Trp92 and Ser93. Probably as a consequence of this conformational change, the D1.3-TEL association occurs at a much slower rate than the D1.3-HEL association. The D1.3-TEL complex is destabilized with respect to the D1.3-HEL interaction by the loss of two hydrogen bonds, exclusively due to the substitution of histidine for glutamine. While antibodies of secondary responses are indeed highly specific for antigen, this work demonstrates that by undergoing subtle conformational change antibodies can still recognize mutated protein antigens, albeit at a cost to affinity.

Animals↗

Humoral immune response against lipopolysaccharide and cytoplasmic proteins of Brucella abortus in cattle vaccinated with B. abortus S19 or experimentally infected with Yersinia enterocolitica serotype 0:9.

The humoral immune responses against three different antigens of Brucella abortus were monitored by enzyme-linked immunosorbent assay in cattle vaccinated with B. abortus S19 or experimentally infected with Yersinia enterocolitica serotype 0:9. Immunoglobulin G (IgG) and IgM responses against (i) B. abortus lipopolysaccharide (LPS), (ii) total cytoplasmic proteins depleted of LPS (LPS-free CYT), and (iii) B. abortus 18-kDa cytoplasmic protein were measured. Vaccinated animals and Yersinia-infected animals developed high anti-LPS IgM and IgG titers, which overlapped with those obtained with sera from B. abortus 544-infected animals used as positive controls. In contrast, only a slight or negative IgG and IgM response against LPS-free CYT and the 18-kDa protein was detected in vaccinated or Yersinia-infected cattle, although its levels were always significantly lower than those of B. abortus 544-infected animals. These data indicate that cytoplasmic proteins of B. abortus could be useful for the differential diagnosis of bovine brucellosis.

Animals↗