Videoconferencing for distance training in orthopaedics.
Explore the source record for details and available documents.
Education, Distance↗
Biomedical subjects
F Baruffaldi
Publications and source records attributed to F Baruffaldi.
Comparison of asynchronous and realtime teleconsulting for orthopaedic second opinions.
We studied a teleconsulting service for second opinions in orthopaedics. Three units of the national insurance organization for accidents at work were connected to a large orthopaedic hospital in Bologna. During a 20-month study, 65 consultations were provided: 51 (78%) by asynchronous (store-and-forward) consulting and 14 (22%) by realtime videoconferencing. All the consultations made use of radiology images (radiographs, computerized tomography scans, magnetic resonance imaging scans and ultrasound scans). Video-messages and still images were commonly used to support the asynchronous consultations. More data were transmitted on average for an asynchronous teleconsultation (8 MByte) than in a videoconference (5 MByte). The average time spent by orthopaedic specialists was slightly longer in videoconferences (21 min, SD 8) than in asynchronous teleconsultations (19 min, SD 8). The clinicians confidence in their diagnosis was generally good but was lower in asynchronous consultations. The main problem affecting the telemedicine service was the lack or the low quality of the information received from the referring sites. The clinical complexity of the case and the organizational requirements were declared to be the main factors affecting the choice of consulting procedure. The study showed that the asynchronous method was preferred in the majority of cases and could be easily integrated into clinical practice, although there were some concerns about the diagnostic quality of the information transmitted.
Humans↗
Proton magnetic relaxation in bone marrow related to age and bone mineral density: low-resolution in vitro studies.
Detailed analysis of proton spin-spin and spin-lattice relaxation behaviors of the bone marrow in the presence of trabecular bone network was performed at low-resolution (B(0) = 0.496T) on rat vertebrae specimens deprived of spinal cord. Two groups of samples, from young and old healthy animals, were investigated before cellular necrosis had started. BMD measurements were carried out to quantify the expected age-related modifications of the trabecular bone network. 1H-MR measurements were also performed on the same samples, deprived of marrow and saturated with water, in order to control the validity of a possible interpretation of the marrow 1H-MR characteristics, in terms of marrow components, and to investigate the possible employment of these samples to study the trabecular bone network properties. We pointed out that: 1) a bimodal distribution of T(2i) and T(1i) values (distinguishing "fast" and "slow" relaxations) describes satisfactorily all the 1H-MR experimental decays; 2) age-related modifications of the trabecular bone network are marked by correlate variations of the BMD value and of the proton spin-spin relaxation rates in water saturated samples; 3) age-related modifications of marrow are underlined by variations of the average value of the "fast" T(2i) and of the "slow" T(1i) relaxation time distributions, which could be attributed to the marrow components different from the fat granules of the adipose cells. Our results suggest that studies in vitro on bone tissue, by 1H-MR techniques at low-resolution, may contribute to a better bone function characterization and, therefore, to a better clinical utilization of MRI techniques.
Aging↗
The effect on the fatigue strength of bone cement of adding sodium fluoride.
New bone cements that include several additives are currently being investigated and tested. One such additive is sodium fluoride (NaF), which promotes bone formation, facilitating implant integration and success. The influence of NaF on the fatigue performance of the cement as used in biomedical applications was tested in this paper. In fact fatigue failure of the cement mantle is a major factor limiting the longevity of a cemented implant. An experimental bone cement with added NaF (12 wt%) was investigated. The fatigue strength of the novel bone cement was evaluated in comparison with the cement without additives; fatigue tests were conducted according to current standards. The load levels were arranged based on a validated, statistically based optimization algorithm. The curve of stress against number of load cycles and the endurance limit were obtained and compared for both formulations. The results showed that the addition of NaF (12 wt%) to polymethylmethacrylate (PMMA) bone cement does not affect the fatigue resistance of the material. Sodium fluoride can safely be added to the bone cement without altering the fatigue performance of the PMMA bone cement.
Compressive Strength↗
Evaluation of radiolucency condition in total hip arthroplasty: a statistical comparison of the diagnostic capability of digitised image vs. conventional X-ray film.
This work analyses the diagnostic capability of radiographic images taken from patients with total hip arthroplasty and visualised on monitor. Images were obtained with digital acquisition of conventional X-ray films. The investigated pathology is the absence of direct contact between bone and prosthesis (radiolucency). Three senior orthopaedists defined the diagnostic "truth" on well-defined regions of interest on 22 conventional X-ray films of total hip arthroplasty, obtaining a total of 110 reference ratings. Films were digitised by use of an X-ray scanner. Four readers evaluated the X-ray images, applying conventional and monitor visualisation. To show any difference between ratings on film and ratings on monitor a sensitivity, specificity and accuracy study jointly with a receiver operating characteristics (ROC) study were performed for each reader and for all combined readings. The intra-observer reproducibility of the radiographic protocol was equal to 87% and the inter-observer one was in the range 85-92%. The sensitivity, specificity and accuracy study together with the ROC analysis did not show significant differences between the two evaluation modes. The evaluation of radiolucency from digitised X-ray films visualised on a monitor resulted statistically comparable with the conventional evaluation on X-ray films.
Diagnosis, Computer-Assisted↗
Radiopacity and fatigue characterization of a novel acrylic bone cement with sodium fluoride.
Acrylic bone cement must provide good radiographic visibility and good long-term mechanical resistance in joint replacements. A new formulation of cement with 6% barium sulfate and 6% sodium fluoride was developed (Fluoride Bone Cement). Barium sulfate is a necessary addition to allow radiographic visibility although it reduces the mechanical strength of the material. Sodium fluoride promotes bone formation. However, its effect on the mechanical behavior is currently unknown while its influence on radiopacity can only be roughly estimated. The aim of this investigation was to establish if the new formulation would be suitable for clinical trials. In this respect, a mechanical (fatigue test) and radiographic (optical density measurements on x-ray films) characterization was performed on a typical commercially available cement with barium sulfate added and on the Fluoride Bone Cement. It was demonstrated that the fluoride cement has a (marginally) superior fatigue strength and comparable radiopacity to commercial radiopaque cements.
Arthroplasty, Replacement↗
A study of the application sharing capabilities in telemedicine.
The main aim of this study was to find out if the image format (TIFF or JPEG) influenced the time delay for transferring radiological images by the application sharing tool of a desktop videoconferencing system. The second task of the study was to define a procedure that optimized the time delay to load and remotely visualize the images. The results were achieved by applying a test procedure called 'benchmark protocol'. The videoconferencing system used for the test was Intel ProShare 200 v2.0. The image transfer was performed by a BRI ISDN connection. We showed that the image format had no significant influence on the time delay. We presented an optimal procedure for image transfer. Furthermore, store and forward procedures with simple file transfer were shown to be inferior to the use of application sharing. For radiological image transfer we recommend to use lossless file formats and application sharing with the image already loaded in because this method achieves the lowest time delays.
Computer Communication Networks↗
Risk of fracture in elderly patients: a new predictive index based on bone mineral density and finite element analysis.
Hip fracture is more and more frequent in elderly population. For this reason, an increasing attention has been focused on the development of a non-invasive method to predict femoral neck fracture. A conventional approach to fracture diagnosis is the measurement of bone mass by dual-energy X-ray absorptiometry in some regions of interest. The aim of this work is to assess a method that accounts for the structural details of the bone providing a more direct determination of strength properties, and improving the diagnostic power of the current densitometric systems. A 2D finite element model of the proximal femur is derived from dual-energy X-ray absorptiometry data. Initially, the method is validated in vitro using a replica of the human femur. The predicted results are compared to strain-gauge measurements and to a 3D finite element model, with good agreement being observed. Then, an in vivo preliminary study on a limited group of patients is carried out. The loading condition that simulates a fall to the side onto the greater trochanter from standing height is employed. All simulations show a peak strain at the femoral neck region with a strain distribution typical of a fall on the side. The proposed method seems to supply a useful tool for the in vivo analysis of the risk of hip fracture.
Aged↗
The Telemedicine benchmark--a general tool to measure and compare the performance of video conferencing equipment in the telemedicine area.
In this paper, we describe the 'Telemedicine Benchmark' (TMB), which is a set of standard procedures, protocols and measurements to test reliability and levels of performance of data exchange in a telemedicine session. We have put special emphasis on medical imaging, i.e. digital image transfer, joint viewing and editing and 3D manipulation. With the TMB, we can compare the aptitude of different video conferencing software systems for telemedicine issues and the effect of different network technologies (ISDN, xDSL, ATM, Ethernet). The evaluation criteria used are length of delays and functionality. For the application of the TMB, a data set containing radiological images and medical reports was set up. Considering the Benchmark protocol, this data set has to be exchanged between the partners of the session. The Benchmark covers file transfer, whiteboard usage, application sharing and volume data analysis and compression. The TMB has proven to be a useful tool in several evaluation issues.
Benchmarking↗
Technical validation of low-cost videoconferencing systems applied in orthopaedic teleconsulting services.
Investigation on the applicability of low-cost videoconferencing (VC) for health care services is becoming a real need. Reduced resources drive the administrators to evaluate inexpensive solutions for telemedicine. Considering this scenario, this work is a preliminary step to validate, from a technical point of view, if low-cost VC systems could be suitable for orthopaedic teleconsulting services. For this purpose, four different videoconferencing systems were tested. Each VC system was composed of a computer and a VC device installed in. VC devices were chosen among the most popular and distributed products (made by Intel, PictureTel and Aethra). The Telemedicine Benchmark, a specific tool defined by the authors, was applied to measure the overall systems performances in terms of time delays during basic rate ISDN connections (128 Kbit/s). Results showed that it is possible to apply low-cost videoconferencing systems for orthopaedic teleconsulting services. Most of the systems provided acceptable performance for medical image visualization and real time joint working. Further developments are recommendable to enhance the VC software tools capabilities and to improve software-user interface. reserved.
Costs and Cost Analysis↗
Low-cost ISDN videoconferencing equipment for orthopaedic second opinions.
We validated the application of low-cost ISDN videoconferencing equipment for telemedicine. A telemedicine benchmark was designed and four different office videoconferencing systems were evaluated, all using basic-rate ISDN connections (128 kbit/s). All the low-cost systems showed generally good or acceptable performance for clinical use. We also investigated the feasibility of videoconferencing for an orthopaedic second-opinion service. Eight point-to-point conferences were conducted to discuss real clinical cases by use of interactive sharing of medical images. The average duration of each session was 35 min. Encouraging results were obtained.
Costs and Cost Analysis↗
Guidelines for multipoint videoconferencing using low-cost, PC-based equipment.
We have compiled a set of guidelines for effective multipoint videoconferencing carried out with low-cost, PC-based systems. The guidelines are based on experience gained during multipoint videoconferences in epidemiology and orthopaedics/radiology. Joint data inspection and manipulation were carried out by application sharing between the PCs. The guidelines are categorized by the time of their application and also by their content. For effective multipoint videoconferences, preparation of the agenda and of digital documents is mandatory. The prevention of echo effects and half-duplex audio connections are of special importance. A protocol to optimize the order of speakers increases the efficient use of conference time. The guidelines worked well when used in a multisite research project and addressed the most important weak points of multipoint videoconferences using low-cost equipment.
Costs and Cost Analysis↗
The ph-net project: a feasibility study for isdn based applications of telemedicine in the orthopaedic field.
Explore the source record for details and available documents.
Journal Article↗
[Femoral densitometry as potential preoperative indicator for cementation of hip prosthesis].
This work suggests a densitometric protocol for femoral studies in arthrosic patients candidate to total hip arthroplasty. The protocol was applied retrospectively to 60 cases to investigate its possible future use as a tool for the preoperative planning of prosthetic stem fixation techniques-i.e., cemented vs. uncemented. The well-known standard procedures for femoral densitometric studies by dual-energy X-ray absorptiometry (DXA), are usually applied to the femoral neck, Ward's triangle and the greater trochanter. Unfortunately, these analyses lose their significance if applied to arthrosic hips, and arthrosis is the main condition requiring total hip arthroplasty. Our protocol for femoral studies in arthrosic patients includes the preoperative analysis of 7 regions of interest in the proximal shaft, similar to Gruen's regions. In vivo precision tests show variation coefficients ranging 0.9-3.7%. The protocol was applied to a series of 60 arthrosic patients who were submitted to total hip arthroplasty by the same surgical staff. Twenty of them were implanted a cemented stem and the other 40 an uncemented ("press-fit") stem. Densitometric results were communicated only after surgery, to avoid any bias on the normal decision-making process usually used to choose the fixation technique for the prosthetic stem. The two groups of cemented vs. uncemented stems had different distribution of densitometric values. Therefore, the information obtained with femoral densitometric studies preoperatively can play a major role in the choice between cemented and uncemented stems. Moreover, if femoral densitometric studies are carried out preoperatively, their results can be closely related to periprosthetic tissue remodeling and implant follow-up.
Adult↗
A computerized system for radiographical evaluation in total hip arthroplasty.
In the field of orthopaedic surgery radiographical image evaluation is frequently used to determine possible pathological processes. For total hip arthroplasty in particular, it is important to evaluate both preoperative femoral morphology and post-operative prosthesis performance in terms of bone adhesion to the implant and, consequently, loosening or stability of prosthesis components. References to a method called Roentgen stereophotogrammetric analysis (RSA) exist in the literature; however, the authors note that this method is expensive and requires the insertion of markers during the operation. Here we present an alternative computerized method for radiographical evaluation which we call radiographical evaluation system in total hip arthroplasty (RESTHA). The accuracy and the repeatability of the method have been evaluated using a medium-sized pelvis-femur system made of composite material. A mean error of +/- 2 mm has been associated to each experimental point. A post-operative inquiry case study is presented to indicate the applicability of the method.
Computers↗
Digital dynamic range expansion applied to X-ray densitometric analysis of total hip replacement.
Due to the presence of the stiff prosthetic stem fitted in the medullary canal during total hip replacement, the surrounding cortex of the femur changes its density over time. This bone remodelling takes place with every type of total hip prosthesis; however, its intensity may vary between prostheses and patients. In the worst cases this process can lead to the late failure of the implant. To monitor such bone density evolution, we are developing a tailored Computer-aided Densitometric Image Analysis system (the major part of this our system uses an 8-bit commercial hardware with 256 levels of grey). The equivalent dynamic range of an X-ray picture is about 10 bits. In this paper we present a method to overcome these hardware limitations by improving the software. Using a double-exposure acquisition it is possible to build a 9-bit image that is good enough for most applications involving bone density measurement.
Absorptiometry, Photon↗
Practical evaluation of standard-based low-cost video conferencing in telemedicine and epidemiological applications.
The results of the evaluation of use of low-cost video conferencing systems (VCSs) in telemedicine is presented. Applications sharing, a new feature of these systems, recently has allowed high-quality computer-supported collaborative work (CSCW). The video conferencing (VCing) equipment used was Intel ProShare 200 v2.0a. It is representative of other low-cost VCSs. The areas of application are epidemiology and telemedicine (orthopaedics and radiology). Potential end users filled out 58 evaluation questionnaires concerning user profiles, contents and benefits of the sessions, organizational aspects, user friendliness, user acceptance, cost effectiveness, technical and multipoint related aspects. Although the end users had a lot of computer experience, their knowledge in VCSs was rather limited. The users assessed the system capable of being integrated into routine work, despite a high organizational impact. The VCS is user friendly, application sharing being used in almost every session. Audio quality was not always sufficient. The remote video was sufficient, as was the quality of medical images such as CT, MRI or X-ray. The user acceptance of the system was high. Multipoint sessions require a structured protocol to be effective. Some technical problems with MCUs (Multipoint Control Units) occurred. The use of low-cost standard VCSs in telemedicine is advisable and is a good substitute for real meetings.
Cost-Benefit Analysis↗
Changes in the femoral cortex as related to prosthetic stem.
The need to improve the features of resistance and duration of prosthetic implants, based on the constant increase in the number per year of total hip substitutions has encouraged the study of the causes of aseptic loosening of implants, in particular, any relationship between femoral morphology, features of the implanted prosthesis (size and coating), degree of contact between the latter and the host bone, and the occurrence of changes in bone trophism. The documentation relative to 143 patients, corresponding to 149 primary hip arthroplasties, was evaluated clinically (according to Merle d'Aubigné modified by Charnley) and radiographically, using a computerized radiographic evaluation system devised by our group. In particular, on x-rays (anteroposterior view) obtained in the area corresponding to the upper and lower margins of the smaller trochanter and of the femoral isthmus, measurements relative to femoral diameters, to the distance between them, and to the corresponding flare indexes were obtained; bone thickness, degree of bone-prosthesis correspondence and any changes in bone trophism caused by stress-shielding and stress-concentration were also measured. An analysis of the data was carried out using non-parametric statistical tests, that allowed us to reveal the surgeon's good standardization in preparation of the femur; the tendency for the cortex to thicken for prostheses of the short type, and the narrowing of the standard type prostheses, the influence of the degree of fit of the prosthesis on trophism of the femoral cortex.
Femur Head↗