PubMed Health⌕ Search

Biomedical subjects

F García-Godoy

Publications and source records attributed to F García-Godoy.

At least 37 records · Page 2Linked to original sources

Standardized microscopic evaluation of the bonding mechanism of NRC/Prime & Bond NT.

PURPOSE: To investigate the in vitro formation of hybrid layer, resin tags and adhesive lateral branches, when using Prime & Bond NT (PBNT) "one-bottle" enamel-dentin bonding system on conditioned and unconditioned human dental substrates. MATERIALS AND METHODS: The enamel dentin adhesive was tested on 18 dentin and 18 enamel flat preparations made on facial and occlusal surfaces, respectively, of extracted posterior teeth. Each experimental tooth substrates were randomly divided in six groups of six samples each: Group 1: PBNT on conditioned dentin (CD) with 36% phosphoric acid (PA), Group 2: PBNT on etched enamel (EE) with 36% PA, Group 3: PBNT on CD with NRC non-rinse conditioning (NRC); Group 4: PBNT on EE with NRC, Group 5: PBNT on dentin without any conditioning (UD), Group 6: PBNT on enamel without any conditioning (UE). In the experimental groups, PBNT was applied following the manufacturer's instructions. Over the PBNT, a layer of Dyract AP was placed and light-cured for 20 seconds. All samples were split-fractured along their long axis. One half of each sample was deproteinized and decalcified at the interface in order to visualize the hybrid layer and the other was completely dissolved in order to observe the morphology of resin tags with a scanning electron microscope. RESULTS: Groups 1, 2: The tested samples showed a micromechanical bonding mechanism to CD and EE with phosphoric acid. PBNT formed hybrid layer, resin tags and adhesive lateral branches on dentin. In the dentin samples of the first group, characteristic reverse cone-shaped tags with their corresponding adhesive lateral branches were evident. At the enamel site, traditional pattern of etch enamel was always observed with resin tags formation. Groups 3, 4: When the bonding system was applied on dentin conditioned with NRC, a thin hybrid layer was formed, resin tags were also noted but their shape was narrower than that observed in Group 1. At the enamel site, the conditioned surface showed presence of an etched pattern and of resin tags. Groups 5, 6: When PBNT was applied without any previous conditioning, the hybrid layer and resin tags formation were not evident on dentin, and no bonding mechanism was developed with unetched enamel.

Acid Etching, Dental↗

In vivo effect of a self-etching primer on dentin.

PURPOSE: To determine the ultrastructural aspects of the dentin collagen area in the cavity preparation floor produced in vivo after phosphoric acid acid-etching or after using Clearfil Liner Bond 2 self-etching primer (LB2 Primer). MATERIALS AND METHODS: Twenty-four non-carious third molars scheduled for extraction from young adult patients (16-30 years old) were used. Conventional Class I cavities (+/- 2 mm deep) were prepared on the occlusal surfaces of all teeth using a cylindrical diamond bur on a high-speed handpiece with copious water spray. To avoid dehydration of the dentin, the smear layer-covered dentin was briefly air-dried for 2 seconds. Cavities were assigned at random to the following groups: Group A: Dentin etched for 15 seconds with 34% phosphoric acid, rinsed for 20 seconds and then briefly air-dried for 2 seconds with oil-free compressed air leaving the surfaces slightly moist. Group B: LB2 Primer was applied to the cavity surfaces for 30 seconds and then briefly air-dried to remove the solvent. Group C: The untreated dentin smear layer was used as a control. In all three groups, the cavities were filled incrementally with a resin-based composite (APX), light curing every increment for 40 seconds. After 30 minutes, the teeth were extracted atraumatically and the samples immediately prepared for evaluation with the transmission electron microscope. RESULTS: The use of a self-etching primer did not produce significant morphological changes in the moist dentin substrate. Adverse morphological conditions where observed when there was an excess water on the dentin surface. Phosphoric acid altered the collagen more severely than the self-etching primer.

Acid Etching, Dental↗

Bonded restorations for the prevention and treatment of the cracked-tooth syndrome.

Several reports revealed that the cracked-tooth syndrome is a common problem in dental practice, which often results in extraction of the affected incompletely fractured teeth. Predominantly restored teeth suffer from these incomplete fractures. Therefore, it is of outstanding importance to stabilize teeth weakened due to cavity preparation. Besides full cuspal coverage by partial or full crowns, bonded restorations have been proposed for internal splinting of restored teeth. Although contradictory data have been published, there is evidence that bonded amalgam or resin-based composite restorations (RBC) do not increase fracture resistance of teeth with wide occlusal-proximal cavities to values similar to sound, unrestored controls. Indirectly fabricated RBC inlays and various ceramic inlays, however, increased fracture strength to levels as high as those of sound caries-free teeth. Therefore, it is recommended that weakened teeth with wide cavities be strengthened by full cuspal coverage with cast or ceramic restorations, by bonded ceramic inlays, or by indirectly-fabricated bonded RBC composite inlays.

Composite Resins↗

Bond strength and interfacial micromorphology of compomers in primary and permanent teeth.

OBJECTIVES: To (1) test and compare the shear bond strength of compomers (Compoglass, Dyract, Hytac) to primary and permanent dentin, (2) compare the values to those obtained with a resin-modified glass ionomer (Vitremer), and (3) evaluate the material-dentin interfacial morphology. SAMPLE AND METHODS: The facial and lingual surfaces of 32 primary and 32 permanent teeth were used. The manufacturers' instructions were followed for the bonding procedures. After bonding, the teeth were thermocycled and sheared. RESULTS: ANOVA and Student-Newman-Keuls test revealed that the shear bond strength for Dyract was significantly higher than for the other restorative systems tested, both for primary (P < 0.001) and permanent (P < 0.01) teeth. Compoglass bond strength was significantly lower than Vitremer for the primary teeth dentin (P < 0.01). The shear bond strength for Compoglass to permanent dentin was significantly lower than for all other restorative systems (P < 0.001). There was a significantly higher shear bond strength for Compoglass (P < 0.05) and Dyract (P < 0.01) restorative systems for primary compared to permanent teeth. For all products tested, all samples revealed cohesive failures. The highest frequency of cohesive failure was reported with Compoglass in both primary and permanent teeth and for Hytac and Vitremer in permanent teeth. Micromorphologically, all restorative systems revealed good adaptation to the underlying dentin; however, there was no evidence of the formation of a hybrid layer or deep resin penetration inside the dentinal tubules. There was no difference in the interfacial morphological adaptation between the primary and permanent teeth. CONCLUSIONS: The compomers tested had shear bond strength values between those of resin-modified glass ionomers and resin composites.

Analysis of Variance↗

Caries prevention during pregnancy: results of a 30-month study.

The purpose of this 30-month study was to explore the effectiveness of a caries-preventive regimen in lowering the salivary mutans streptococci level in pregnant women and, subsequently, in inhibiting the growth of these bacteria in their young children. Beginning at the end of the sixth month of pregnancy and continuing until delivery, subjects rinsed daily with 0.05 percent sodium fluoride and 0.12 percent chlorhexidine. The authors monitored the salivary mutans streptococci levels during the last six months of pregnancy and every six months thereafter for 24 months. They also measured bacterial levels in the children every six months until they reached age 24 months. The results show that treatment significantly reduced salivary mutans streptococci levels in mothers and delayed the colonization of bacteria in their children for about four months.

Analysis of Variance↗

Effect of topical fluoride application before and after amalgam restoration placement on recurrent caries inhibition.

PURPOSE: To evaluate the in vitro caries inhibition effects of 1.23% APF foam topical fluoride treatment of cavity preparations, prior to restoration placement and after restoration placement. MATERIALS AND METHODS: Sixty standardized Class V preparations were placed in molars. Randomly, 40 teeth received an amalgam restoration: Twenty other teeth had 1cc 1.23% APF foam applied to preparation surfaces for 1 minute, then an amalgam restoration was placed. The APF was not rinsed away prior to restoration, it was displaced by the pressure of the amalgam being condensed into the preparation. Twenty of the initial 40 amalgam restorations had 1 cc 1.23% APF foam applied to the external tooth/restoration margins for 4 minutes, the remaining 20 amalgam restorations acted as the controls. Acid-resistant varnish was placed, leaving 1 mm of tooth adjacent to restoration margins exposed. All specimens were subjected to an artificial caries challenge (pH 4.4) for 5 days. Sections of 100 microns were cut longitudinally through the restored margins, photographed under polarized light microscopy, then demineralized areas adjacent to restoration margins were quantitated. RESULTS: Results demonstrated the mean (+/- S.D.) area (microns 2) of demineralization 100 microns from the restoration margins to be: amalgam 10,221 +/- 524, amalgam with 1-minute APF over preparation 529 +/- 557, amalgam with 4-minute APF over external surface 736 +/- 359. ANOVA and Duncan's (P < 0.05) indicated both 1.23% APF foam topical fluoride treatment regimens exhibited significantly less demineralization at restoration margins than the non-treated amalgam control. There was no significant difference between the two fluoride placement regimens examined in this study.

Acidulated Phosphate Fluoride↗

Bonding mechanism of Ketac-Molar Aplicap and Fuji IX GP to enamel and dentin.

PURPOSE: To evaluate the bonding mechanism to enamel and dentin of two chemically-cured restorative glass ionomer cements (GICs). MATERIALS AND METHODS: Buccal surfaces of six caries-free premolars stored in a 1% chloramine solution were ground and then polished with 600 grit SiC paper to expose both enamel and dentin. Ketac-Molar Aplicap (after conditioned with Ketac-Conditioner) or Fuji IX GP (after conditioned with Cavity Conditioner) was applied on the enamel and dentin according to the manufacturers' instructions. Ketac-Molar Aplicap was coated with Ketac-Glaze and Fuji IX GP with GC Fuji Varnish. After 24-hr immersion in water, all teeth were sectioned bucco-lingually in the center of the bonded surface. Bonded interfaces of one of the halves of the sectioned specimens were etched with 35% phosphoric acid gel for 10 s and then soaked in 5% sodium hypochlorite solution for 5 min. All specimens were dehydrated with ethyl alcohol and dried with HMDS. Bonding interfaces were coated with gold-palladium and observed under the SEM. RESULTS: For both Ketac-Molar Aplicap and Fuji IX GP, an intimate adaptation between the material and the enamel was observed. Both materials bonded to dentin without gap formation. For both Ketac-Molar Aplicap and Fuji IX GP, neither resin tags nor hybrid layer was observed in any specimen.

Acid Etching, Dental↗

Secondary caries adjacent to amalgam restorations lined with a fluoridated dentin desensitizer.

PURPOSE: To determine the in vitro effect of a fluoridated dentin desensitizer solution (DentinBloc) on (1) secondary caries formation, and (2) the interfacial adaptation when used as a cavity liner before amalgam (Dis-persalloy) placement. MATERIALS AND METHODS: 24 macroscopically caries-free molars were selected. Class V cavity preparations on mesial and distal surfaces were placed along the cemento-enamel junction, providing an enamel margin and a root surface margin. DentinBloc was applied prior to alloy restoration in the experimental group for 60 s (the excess was removed with cotton pellets), while a copal cavity varnish (Copalite) was used before alloy restoration in the control group. Polarized light evaluation was performed on longitudinal sections (24 caries risk sites for enamel and dentin margins in each group). Alloy-tooth interfaces were evaluated by SEM. RESULTS: Wall lesions were present in 100% of caries-risk sites for the control group, while 58% of enamel risk sites and 50% of root risk sites had wall lesions in the DentinBloc group. Surface lesion depth was reduced 13% at enamel margins and by 18% at root margins in the experimental group when compared to the control group. Relatively small interface gaps between the alloy and tooth surfaces were seen in both groups, but these were less for the root surface margins (2-5 microns) than for the enamel margins (5-15 microns).

Analysis of Variance↗

Clinical evaluation of Helioseal F fissure sealant.

Unfilled resins are commonly in use as sealant material. In addition, there are filled sealants available. Helioseal F is a newly developed filled material with fluoride release. In this clinical trial, Helioseal F has been evaluated in one lower molar versus Delton opaque as an unfilled control in lower molars. After 12 months there were no significant differences in retention, porosities, and the number of clinically unacceptable margins between the materials. The complete retention was 30 out of 31 examined teeth for Delton and 28 out of 31 for Helioseal F. After 1 year of clinical testing, these results indicate that a sealant containing fluoride-releasing particles did not show a significant difference in retention rate compared to an unfilled conventional sealant. However, long-term results concerning marginal adaptation should be evaluated.

Adolescent↗

Bonding mechanism of three "one-bottle" systems to conditioned and unconditioned enamel and dentin.

PURPOSE: This in vivo study investigated the formation of hybrid layer, resin tags and adhesive lateral branches, by use of the latest generation of enamel-dentin bonding systems ("one-bottle" systems) on conditioned and unconditioned enamel and dentin. MATERIALS AND METHODS: The dentin adhesives were tested on 24 flat dentin preparations made on facial surfaces of vital, periodontally compromised teeth. The experimental teeth were randomly divided in six groups of four samples each. Group 1: Prime & Bond 2.1 (conditioned dentin, CD); Group 2: Single Bond (CD); Group 3: Syntac Sprint (CD); Group 4: Prime & Bond 2.1 (unconditioned dentin, UD); Group 5: Single Bond (UD); Group 6: Syntac Sprint (UD). In the first three groups, the "one-bottle" systems were applied following the manufacturers' instructions, while in the other three groups the dentin and the enamel were not treated with phosphoric acid and the primer was applied directly on the prepared surfaces. On top of the primer-adhesive, a thin layer of resin was applied and light-cured for 20 seconds. The sample teeth were extracted immediately after the adhesive material was light-cured. All the samples were split-fractured along their long axis. Half of the samples were deproteinized and decalcified at the interface in order to visualize the hybrid layer and the other halves were completely dissolved in order to observe the morphology of resin tags by use of scanning electron microscopy. RESULTS: Groups 1-3: All the tested products showed the same micromechanical bonding mechanism to conditioned dentin with phosphoric acid: they formed hybrid layer, resin tags and adhesive lateral branches. In the samples of the first three groups, characteristic reverse cone-shaped tags with their corresponding adhesive lateral branches were evident. At the enamel site, traditional pattern of etch enamel was always observed. Groups 4-6: When the bonding systems were applied on unconditioned dentin, hybrid layer was not formed, resin tags were rarely noted and their shape was narrow and they did not completely seal the tubular orifices. The tubules remained mainly closed by smear plugs. At the enamel site, the unetched surface showed absence of characteristic etch pattern and of resin tags.

Acid Etching, Dental↗

Bond strength and interfacial morphology of adhesives to primary teeth dentin.

PURPOSES: To evaluate (1) the shear bond strength to the dentin of primary teeth and failure site of hydrophilic dentin bonding agents, (2) the interfacial micromorphology of these adhesives on primary teeth. MATERIALS AND METHODS: Seventy-six primary noncarious molars stored in distilled water were obtained. The teeth were cleaned with pumice and a rubber cup. The mesio-buccal surface of the teeth was ground flat with hand pressure with a series of SiC paper ending with the 600 grit to provide a uniform surface on superficial dentin to which the adhesives and resin composite could be applied. After preparing the dentin surface, the teeth were stored in distilled water for 48 hours. They were then rinsed and dried with compressed air and divided at random into four groups of 16 specimens each: Group 1: Dentastic; Group 2: One-Step; Group 3: Prime & Bond 2.0; Group 4: Compoglass SCA. Z100 resin was used in all groups. All specimens were thermocycled (500x) and sheared in an Instron machine. After shear testing, the debonding sites of all samples were examined with a stereomicroscope and selected samples were also examined with the scanning electron microscope. Three additional samples per group were used to evaluate the resin adaptation to dentin. RESULTS: The results in MPa were: Dentastic 19.62 (4.67); One-Step 11.24 (3.67), Prime & Bond 22.38 (6.47), Compoglass SCA 18.88 (4.04). ANOVA (P < 0.0001) revealed that there was a significant difference between the groups. The Student-Newman-Keuls test (P < 0.05) showed no statistically significant difference between Dentastic, Prime & Bond and Compoglass SCA. However, these three groups were statistically significantly higher than One Step. In the Dentastic group, 14 of 16 samples revealed resin cohesive failure (resin fracture) while two of 16 displayed dentin cohesive failure (dentin fracture). In the One Step group, 15 samples failed at the resin and one sample showed dentin cohesive failure. In the Prime & Bond group, 12 specimens revealed resin cohesive failure while four displayed dentin cohesive failure. In the Compoglass SCA group, 13 samples had resin cohesive failures while three had dentin cohesive failures. All samples revealed an intimate adaptation to the dentin displaying resin tag formation.

Acid Etching, Dental↗

Saliva contamination and bond strength of single-bottle adhesives to enamel and dentin.

PURPOSE: To determine and compare the shear bond strength of four single-bottle adhesives to enamel and dentin contaminated with human saliva. MATERIALS AND METHODS: Prime & Bond 2.1, One Step, Tenure Quik and Syntac Single Component were evaluated. Ninety-six sound molars were divided into three subgroups for each of the four adhesives. Small flat areas on the buccal and lingual surfaces were ground in enamel. Small flat areas on the mesial and distal surfaces were ground on the middle dentin of the same teeth. Each adhesive was tested under: uncontaminated conditions (Group 1), contamination of the bonding surface with fresh whole saliva for 20 seconds and removing the excess with cotton pellets (Group 2), and contamination of the bonding surface with fresh whole saliva for 20 seconds and rinsing the saliva for 20 seconds before adhesive application (Group 3). After adhesive application, a plastic mold was filled with composite, applied to the bonding surface and light-cured. The teeth were thermocycled (1,000 cycles) and sheared using an Instron testing machine. The results were analyzed using a three-way ANOVA. RESULTS: Saliva contamination of enamel or dentin did not affect the shear bond strength of the adhesives tested except for Syntac SC with contaminated dried enamel. One Step displayed similar bond strengths to both enamel and dentin; P & B 2.1, Tenure Q and Syntac SC displayed higher bond strength to enamel than to dentin. P & B 2.1 showed significantly higher bond strengths to enamel than the other adhesives, but there was no significant difference for dentin bond strength under the uncontaminated condition.

Analysis of Variance↗

Surface hardness and wear of glass ionomers and compomers.

PURPOSE: To determine the surface hardness and in vitro wear of glass ionomer cements (GIC) and compomers in comparison with a resin composite and to test for a possible correlation between the determined hardness and wear values. MATERIALS AND METHODS: Samples were made of conventional GIC (Ketac-Fil, Fuji II, Fuji IX, Ketac-Prototype = Ketac-Molar), resin-modified GIC (Photac-Fil, Fuji II LC, Vitremer), compomers (Dyract, Compoglass) and resin composite (Z100) for the hardness test (n = 10) and for the wear test (n = 3). The materials were handled according to the manufacturers' instructions. The samples were stored in deionized water for 48 hours at 37 degrees C prior to the determination of Rockwell hardness and three-body in vitro wear. RESULTS: Hardness could not be measured on Ketac-Fil and Fuji II as the samples fractured before a reading was obtainable. Statistically significant differences were found in hardness and wear between brands and between the four types of material. Surface hardness: resin-modified GIC < conventional GIC = compomers < resin composite. In vitro wear: resin-modified GIC > compomers > conventional GIC > resin composite. A negative correlation between hardness and wear was recorded.

Analysis of Variance↗

Clinical evaluation of glass ionomers and compomers in Class V carious lesions.

PURPOSE: To evaluate the 2-year clinical performance of two polyacid-modified resin composites and two resin-modified glass ionomers in Class V carious cavities. MATERIALS AND METHODS: A total of 120 Class V cavities were selected and 30 cavities were restored with one of two resin-modified glass ionomer materials (Fuji II LC Improved and Vitremer) and two polyacid-modified resin composites (Dyract and Compoglass) in Class V carious cavities after 2 years. The restorations were clinically evaluated after 1 and 2 years using the USPHS criteria. RESULTS: One-year findings revealed a significant difference in color match between Vitremer and other materials (P < 0.05) and no significant difference was found for the other criteria. Two-year results indicated a significant difference between resin-modified glass ionomers and polyacid-modified resin composite materials. The difference between Compoglass and Dyract was not statistically significant whereas the difference between Vitremer and Fuji II LC was statistically significant. Caries was not recorded at any evaluation period.

Adult↗

Bond strengths of resin-modified glass ionomers and polyacid-modified resin composites to dentin.

PURPOSE: To measure the shear bond strength of two resin-modified glass ionomers (Vitremer and Fuji II LC) and two polyacid-modified resin composites (Compoglass and Dyract) when applied to dry dentin, dentin supplied with water pressure from the pulp, and after thermocycling. MATERIALS AND METHODS: Ninety six extracted third molars were used. The root portion was removed just below the cemento-enamel junction and the occlusal enamel was removed from the crown segment. An artificial root portion was made in Plexiglas, cemented to the crown segment and connected to a 36 cm. height water column. The tested materials were applied to the surface of dry dentin, dentin supplied with water pressure from the pulp, and after thermocycling. Shear bond strength was measured for the bonded specimens using an Instron at a crosshead speed of 0.5 mm/minute. RESULTS: There were no significant differences in bond strengths between Fuji II LC, Compoglass, and Dyract, which were significantly greater than that of Vitremer. The bond strengths of all materials were slightly increased or not affected by the presence of water pressure from the pulp. After thermocycling, the bond strengths of Fuji II LC, Compoglass, and Dyract were not significantly affected whereas those of Vitremer were significantly decreased.

Analysis of Variance↗

Resin bond strength with different methods to remove excess water from the dentin.

PURPOSE: To compare the resin bond strength using different methods to remove the excess water from the dentin while maintaining it moist. MATERIALS AND METHODS: 60 human molars were randomly divided into four treatment groups of 15 teeth each as follows: Group 1: A wet bonding technique was used as recommended by the manufacturer and was used as a control group. The exposed occlusal dentin surfaces were conditioned with 32% phosphoric acid (Uni-Etch) for 15 seconds and rinsed for 15 seconds. 40 microL of distilled water was added to standardize the content of the water on dentin surface. The conditioned dentin surfaces were gently blow-dried for 3 seconds with oil-free compressed air. The tip of the syringe was placed at 2 cm from the dentin surface. One coat of the One-Step primer/adhesive was applied to the dentin surface using a fully saturated brush tip, allowed to remain on the surface undisturbed for 3 seconds, and then gently air-dried for 3 seconds from a distance of 1 cm to remove excess solvent and water. A second coat of the primer/adhesive was applied and gently air-dried from a distance of 1 cm. The primer/adhesive was light-cured for 10 seconds. Resin composite (Z100, shade A3) was then polymerized for 40 seconds. Group 2: The dentin surface was blot-dried by applying tissue paper (Kimwipes EX-L) adjacent to the exposed area; Group 3: The excess water on the dentin surface was removed using an applicator brush (Bend-a-Brush) for 5 seconds; Group 4: A small dry hydrophilic cotton pellet was gently applied over the dentin surface to remove the excess water. The sequential steps for these three groups were similar to those of Group 1. The dentin surface remained visibly moist in all procedures. After light-curing, the specimens were thermocycled (5 degrees and 55 degrees C, 500 cycles, 30-second dwell time). The specimens were sheared and the data were analyzed using ANOVA and Tukey's test methods. The site of failure was analyzed using a stereomicroscope and a scanning electron microscope. RESULTS: ANOVA revealed that there was a statistically significant difference between the groups (P < 0.05). Turkey's test revealed that Group 1 was significantly lower than Groups 2, 3 and 4 with no difference between the last three groups (P < 0.05). All samples showed resin cohesive failures.

Analysis of Variance↗

Dentastic bond strength to dentin.

PURPOSE: To evaluate the shear bond strength to the dentin of permanent teeth and failure site of Dentastic hydrophilic dentin bonding agent. MATERIALS AND METHODS: Forty permanent noncarious molar teeth stored in distilled water were obtained. The teeth were cleaned with pumice and a rubber cup. The mesio-buccal surface of the teeth was ground flat with hand pressure with a series of SiC paper ending with the 600 grit to provide a uniform surface on dentin to which the resin composite could be applied. After preparing the tooth surface, the teeth were stored in distilled water for 48 hours. They were then divided at random into four groups of 10 specimens each: Group 1: Dentastic, five coats of primer; Group 2: Dentastic, three coats of primer; Group 3: Dentastic, five coats of primer, light-cured adhesive before resin bonding; Group 4: Dentastic, three coats of primer, light-cured adhesive before resin bonding. All specimens were thermocycled (500x) and sheared in a testing machine. After shear testing, the debonded sites of all samples were examined with a stereomicroscope and a scanning electron microscope. RESULTS: The results in MPa were: Group 1: 22.63 +/- 6.24; Group 2: 23.35 +/- 5.14; Group 3: 23.58 +/- 5.66; Group 4: 27.26 +/- 8.22. ANOVA and Student-Newman-Keuls showed no statistically significant difference between the groups. In all groups, all specimens failed at the dentin (dentin cohesive failure = dentin fracture) or at the resin (resin cohesive failure = resin fracture). This means that the bond strength of the product is stronger than the cohesive strengths of the dentin and the resin.

Analysis of Variance↗