Biomedical subjects

F Giantomassi

Publications and source records attributed to F Giantomassi.

6 recordsLinked to original sources

PubMed2005

High-resolution 3D scaffold model for engineered tissue fabrication using a rapid prototyping technique.

Rapid prototyping, automatic image processing (computer-aided design (CAD)) and computer-aided manufacturing techniques are opening new and interesting prospects for medical devices and tissue engineering, especially for hard tissues such as bone. The development of a bone high-resolution scaffold prototype using these techniques is described. The results testify to the fidelity existing between microtomographic reconstruction and CAD. Furthermore, stereolithographic manufacturing of this scaffold, which possesses a high degree of similarity to the starting model as monitored by morphological evaluations (mean diameter 569 +/- 147 microm), represents a promising result for regenerative medicine applications.

Bone Substitutes↗

PubMed2004

In vitro H2O2 stress and patterns of mitochondrial damage in the NCTC 2544 continuous cell line--a morphologic and morphometric study.

The morpho-functional and energy condition of NCTC 2544 cells exposed for 1 hr to a high concentration of H2O2 (500 microM) was studied at 4 and 24 hr to investigate the short- and medium-term biomolecular mechanisms affecting energetic mitochondrial capability. Morphometric data obtained from ultrastructural investigations clearly showed significant modifications of the different mitochondrial parameters--numerical density (Nv), volume density (Vv) and Vv/Nv ratio, in interkinetic, apoptotic and mitotic cells after H2O2 exposure (from 4 to 24 hr). These results were confirmed by the detection at 24 hr of mitochondrial cytochrome c release in the cytosol, indicating impairment in mitochondrial membrane permeability. Data supporting these observations were obtained from the MTT test which showed reduced cell viability in H2O2 treated cultures at 4 hr and an even greater decrement at 24 hr. In conclusion our data imply that significant cause-effect relationships exist between the toxicity of reactive oxygen species (i.e. 500 microM H2O2) and morpho-structural mitochondrial damage in interkinetic, apoptotic and mitotic cells, respectively. They support previous results present both in the literature and also in one of our earlier papers which show that early nuclear DNA damage could initiate mitochondrial or intrinsic apoptotic pathway after H2O2 exposure.

Apoptosis↗

PubMed2004

Mitochondrial changes induced by natural and synthetic asbestos fibers: studies on isolated mitochondria.

Asbestos fibers, such as chrysotile and crocidolite, are known to have cytotoxic effects on different cell types. in vivo exposure to asbestos fibers can induce both fibrotic and malignant lung diseases , however, the mechanisms linking exposure to the subsequent development of the diseases are unknown. Numerous investigations suggest the involvement of reactive oxygen species (ROS). ROS are known to damage biological macromolecules including proteins, cell membrane lipids and nucleic acids; alterations of these essential cellular components can alter cell function and can drive the cell to neoplastic transformation or to cell death. Because the mitochondrial respiratory chain is an important source of ROS and RNS (reactive nitogen species) in the cells, we have investigated the effects of aqueous extracts of asbestos (natural and synthetic) fibers on some mitochondrial activities. Our data show that crocidolite fibers release substances in solution that may interfere directly with the mitochondrial cytochrome oxidase complex. Moreover, the calcium ions released from these fibers induce opening of the permeability transition pore of the inner membrane leading to a possible cytotoxic effect due to the release of apoptotic factors normally localized in the mitochondrial intermembrane space. In addition, crocidolite extracts enhance the mitochondrial production of ROS. No significant biochemical effects are exerted by chrysotile, either natural or synthetic, on isolated mitochondria. Nevertheless, all asbestos fibers tested induce morphological alterations visualized by transmission electron microscopy and morphometric analysis.

Animals↗

PubMed2003

Exploring the damage limitation possibilities of mineral fibres for future integrated solutions: an in vitro study.

Owing to their possible carcinogenic effect, asbestos and other silica derivatives have been identified as priority substances for risk reduction and prevention of pollution. Neutralisation procedures have thus become a topical research subject in many European and American countries. In the present study, silica derivatives (asbestos-containing and asbestos substitutes like slag wool, rock wool, cement asbestos) were fully impregnated with an epoxy resin according to the procedure used for the in situ impregnation with viscous polymeric media, which penetrate and cement the fibres in place and reduce the risk of their dispersion in air. Untreated and treated samples were used to investigate their in vitro interaction with a human continuous epithelial cell line (NCTC 2544 keratinocytes) and test the resin's efficiency in passivating the surface activity of the fibrous particulate. SEM and morpho-quantitative data evidenced that impregnation with the epoxy resin modifies the mineral fibres' bioactivity (reduction of cell adhesion and decreased spread/round cell ratio) and demonstrated the value of in vitro cell testing after passivation as a risk-assessment procedure. These tests could be used for the rapid determination of the level of passivation of new synthetic mineral fibrous materials subjected to resin impregnation.

Air Pollutants, Occupational↗

PubMed2003

Tailoring biomaterial compatibility: in vivo tissue response versus in vitro cell behavior.

Biocompatibility relies essentially on surface phenomena, represented by cell-cell, cell-material and material (polymer)-protein interactions. An in vivo and in vitro experimental investigation was carried out on the biomaterials of two different classes with a good potential for in situ utilisation. Non-resorbable (Polypyrrole, Polyaniline, Polyimide) and resorbable (PLLA-PDXO-PLLA) materials for tissue engineering were studied for their overall tissue tolerance and cellular interactions. These non-resorbable polymers conceived for biosensor applications and implantable drug-delivery systems are intrinsically conductive. The PLLA-PDXO-PLLA triblock copolymer showed interesting tensile properties for bone and cartilage tissue engineering due to the presence of 1,5-dioxepan-2-one. In vitro and in vivo parallel studies showed an interesting correspondence: a) the cells in contact with the resorbable material that appeared to be capable of migratory-regenerative aspects in vitro exhibited good compatibility in vivo; whereas b) the non-resorbable materials, which are designed to remain in situ in vivo, were seen to have the potential to represent an adverse factor (inflammation, fibrotic reactions) that correlated with some aspects of cell behaviour in vitro.

Absorbable Implants↗

PubMed2002

Fabricated hyalS micropatterns and surface guidance of NCTC 2544 continuous cell line: an in vitro study.

Surface topography is important in establishing tissue organisation adjacent to implants, smooth surfaces generally being associated with fibrous encapsulation. By virtue of its large hydrated molecular volume and its capacity to form molecular matrix, hyaluronic acid can expand the interfibrillar collagen spaces to allow the movement of cells, although it can also hamper their locomotion. Low molecular-weight hyaluronan can also stimulate cell proliferation, especially at low concentrations. The aim of the present work was to evaluate in vitro the growth and migratory behaviour of NCTC 2544 keratinocytes cultured on different materials microstructured with hyaluronic acid or sulfated hyaluronic acid to assess the possibility of using these devices in the repair process of soft tissues. Ultrastructural morphological analyses, morphometric evaluations and detection of cytoskeletal elements were performed. Our observations provide evidence that micrometer-size parallel grooves of hyaluronic acid can influence cell growth behaviour since cells seeded onto the microstructured substrate arranged themselves according to a shape and an orientation that clearly reflected the chemotropism exerted on them by the two forms of acid. These data also highlight the importance of accurate microtexture fabrication. We intend to follow up these in vitro studies with in vivo experimental applications using PET and gelatin substrates structured with HyalS to evaluate wound healing responses, and to extend our investigations of the cytoskeletal modifications induced by different microstructures.

Adjuvants, Immunologic↗