PubMed HealthSearch

Biomedical subjects

F K Vogensen

Publications and source records attributed to F K Vogensen.

9 recordsLinked to original sources

A genomic region of lactococcal temperate bacteriophage TP901-1 encoding major virion proteins.

Two major structural proteins, MHP (major head protein) and MTP (major tail protein), from the lactococcal temperate phage TP901-1 were sequenced at their amino acid termini, and derived degenerate oligonucleotides were used to locate the corresponding genes in the phage genome. This genomic region was sequenced. The sequence characterized includes a total of 11 open reading frames (ORFs) showing an operon structure. Upstream of each ORF, except ORF b2 and ORF x, potential ribosome-binding sites were found, suggesting independent translation. However, coupled translation is suggested for ORF x and as a possibility for ORF b3 and ORF c2, which have ribosome-binding sites located more distant from their start codons. ORF b2 may be translationally fused with mhp at a low frequency. The mhp and mtp genes are transcribed as a 3.7-kb mRNA with at least six additional ORFs. The organization of the genomic region analyzed resembles that of other distantly related phages, providing possible roles for the uncharacterized ORFs.

Amino Acid Sequence

Analysis of heat shock gene expression in Lactococcus lactis MG1363.

The induction of the heat shock response in Lactococcus lactis subsp. cremoris strain MG1363 was analysed at the RNA level using a novel RNA isolation procedure to prevent degradation. Cloning of the dnaJ and groEL homologues was carried out. Northern blot analysis showed a similar induction pattern for dnaK, dnaJ and groELS after transfer from 30 degrees C to 43 degrees C when MG1363 was grown in defined medium. The dnaK gene showed a 100-fold induction level 15 min after temperature shifting. Induction of the first two genes in the dnaK operon, orf1 and grpE, resembled the pattern observed for the above genes, although maximum induction was observed earlier for orf1 and grpE. Novel transcript sizes were detected in heat-shocked cells. The induction kinetics observed for ftsH suggested a different regulation for this gene. Experimental evidence for a pronounced transcriptional regulation being involved in the heat shock response in L. lactis MG1363 is presented. A gene located downstream of the dnaK operon in strain MG1363, named orf4, was shown not to be regulated by heat shock.

Bacterial Proteins

A resolvase-like protein is required for the site-specific integration of the temperate lactococcal bacteriophage TP901-1.

The integration system of the temperate lactococcal phage TP901-1 was characterized in Lactococcus lactis subsp. cremoris LM0230 and MG1363 with the use of deletion derivatives of the integration vector pBC143 (B. Christiansen, M. G. Johnsen, E. Stenby, F. K. Vogensen, and K. Hammer, J. Bacteriol. 176:1069-1076, 1994). The phage-encoded elements necessary for integration were localized on a 2.8-kb NsiI-EcoRI fragment including the phage attachment site, attP. This fragment was DNA sequenced, and sequence analysis revealed three putatively expressed open reading frames, Orf1, Orf2, and Orf3 By the introduction of mutations within the orf1, orf2, and orf3 genes, it was shown that only Orf1 was necessary for the integration process. Furthermore, it was found that Orf1, attP, and a 425-bp region upstream of the orf1 gene are sufficient for integration. Orf1 contains 485 amino acids and is located just upstream of attP. The N-terminal 150 to 180 amino acids of Orf1 showed 38 to 44% similarity to the resolvase group of site-specific integrases, while no similarity to known proteins was found in the C-terminal end. Bacteriophage TP901-1 therefore contains a unique integration system that does not resemble the Int class of site-specific integrases usually found in temperate bacteriophages. The constructed integration vector, pBC170, integrates into the chromosomal attachment site very efficiently and forms stable transformants with a frequency corresponding to 20% of the transformation efficiency.

Amino Acid Sequence

Virion positions and relationships of lactococcal temperate bacteriophage TP901-1 proteins.

The major proteins of phage TP901-1 virion were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and structural relations were determined using specific antibodies, obtained by affinity purification from a polyclonal serum. A 23-kDa protein was identified as the major tail protein, and a 31-kDa molecule as the major head protein, respectively. Labeling experiments with antibodies against two proteins, with molecular masses of 20 and 19 kDa, indicated that they were baseplate-related components. A 72-kDa protein was found to be part of a neck passage structure, which includes a collar. Evidence for the presence of attached whiskers was also obtained. T7 RNA polymerase-mediated expression of the two major proteins confirmed the gene location of the previously sequenced region of the phage genome. The relation to other lactococcal phages was determined by DNA hybridization and antibody probing, showing that despite low DNA similarity, TP901-1 NPS epitopes were detected in both related and unrelated small isometric-headed phages.

Antibodies, Viral

Restriction-modification systems in Lactococcus lactis.

Several restriction-modification (R-M) systems have been identified in Lactococcus lactis. Most of the systems have been plasmid encoded and function as phage-resistance mechanisms. At least five different type-II R-M systems, LlaAI, LlaBI, LlaCI, LlaDI and LlaEI, were identified in isolates from a mixed Cheddar starter culture. LlaAI and LlaBI recognized the DNA sequences 5'- decreases GATC-3' and 5'-C decreases TRYAG-3', respectively. The genes coding for the LlaAI and LlaBI R-M systems have been cloned and sequenced. The LlaAI R-M system had two genes coding for methyltransferases (MTases) and one gene coding for a restriction endonuclease (ENase). The MTases showed high homology to the MTases from DpnII. The LlaBI R-M system had one gene coding for a MTase and one gene coding for an ENase.

Base Sequence

Characterization of the replicon from the lactococcal theta-replicating plasmid pJW563.

The replication region of the lactococcal plasmid pJW563 was localized to a 2.3-kb EcoRI fragment. This DNA fragment was sequenced ans a 1155-bp open reading frame, repB563, encoding a putative protein RepB563 of 385 amino acids was found. An AT-rich noncoding region, repA563, was found upstream of repB563. This segment included several direct and inverted repeats. A downstream 591-bp open reading frame, ORF X, which was not necessary for replication, was putatively translationally coupled to repB563, RepB563 supplied in trans could support replication of a plasmid containing repA563 and a truncated repB563. This observation suggests that RepB563 is a trans-acting replication protein, and repA563 the cis-acting origin of replication, repA563, repB563, and the beginning of ORF X showed high homology to similar regions in a family of lactococcal theta-replicating plasmids. The repA DNA sequences and the RepB amino acid sequences of the plasmids were aligned and the consensus sequences generated. The comparison revealed highly conserved areas among this family of plasmids. In addition, variable domains emerged, presumably having a plasmid specific function, pVS40 and pC1305 were plasmids with replication proteins showing high homology to RepB563. Despite this homology, replication from repA563 could not be supported by the pVS40 or pC1305 replication protein supplied in trans. Likewise the pJW563 protein could not support replication from the pVS40 origin. pJW563 was found to be compatible with the pVS40 and pC1305 replicons. The results indicate that pJW563 belongs to the widespread family of lactococcal theta-replicating pladmids. Despite the high homology between their replicons, the interaction between the replication origin and the protein is highly specific in many cases rendering the plasmids compatible.

Amino Acid Sequence

Characterization of the lactococcal temperate phage TP901-1 and its site-specific integration.

The temperate lactococcal phage TP901-1, induced by UV light from Lactococcus lactis subsp. cremoris 901-1, was characterized. The restriction map was found to be circular, and the packaging of TP901-1 DNA was concluded to occur by a headful mechanism. The pac region was localized on the 38.4-kb phage genome. TP901-1 belongs to the class of P335 phages (V. Braun, S. Hertwig, H. Neve, A. Geis, and M. Teuber, J. Gen. Microbiol. 135:2551-2560, 1989). Evidence is presented that the phages TP936-1 (V. Braun, S. Hertwig, H. Neve, A. Geis, and M. Teuber, J. Gen. Microbiol. 135:2551-2560, 1989) and C3-T1 (A. W. Jarvis, V. R. Parker, and M. B. Bianchin, Can. J. Microbiol. 38:398-404, 1992) are very closely related to or are identical to TP901-1. The lytically propagated TP901-1 phages were able to lysogenize both indicator strains Lactococcus cremoris 3107 and Wg2. Lysogenization resulted in site-specific integration of the phage genome into the bacterial chromosome. Only one chromosomal attB site was found in 20 independent lysogens. The attP region of TP901-1 and the attL and attR regions were cloned and sequenced. The results showed a core region of only 5 bp, in which the recombination occurs, followed after a 1-bp mismatch by a 7-bp identical region, TCAAT(T/C)AAGGTAA. This result was further verified by sequencing of the attB region obtained by PCR. An integration vector was constructed with the 6.5-kb EcoRI fragment from TP901-1 containing attP. This vector also functions in the plasmid-free strains, MG1363 and LM0230 with only one specific attB site, strongly indicating a more general use of the TP901-1-based integration vector in lactococci.

Bacteriophages

LlaAI and LlaBI, two type-II restriction endonucleases from Lactococcus lactis subsp. cremoris W9 and W56 recognizing, respectively, 5'-/GATC-3' and 5'-C/TRYAG-3'.

Two type-II restriction endonucleases have been purified from Lactococcus lactis subsp. cremoris W9 and W56, the strains isolated from a mixed Cheddar starter. Their characterization showed that LlaAI was an isoschizomer of MboI from Morexella bovis with the cleaving sequence, 5'/GATC-3', being sensitive to methylation of the adenine residue; LlaBI was an isoschizomer to SfcI from Streptococcus faceium with the cleaving sequence, 5'-C/TRYAG-3'. Both LlaAI and LlaBI restriction-modification (R-M) systems are encoded by the plasmids, respectively, pFW094 and pJW563, protecting the harboring strain against phage attack.

Deoxyribonucleases, Type II Site-Specific

Antimicrobial activity of lactic acid bacteria isolated from sour doughs: purification and characterization of bavaricin A, a bacteriocin produced by Lactobacillus bavaricus MI401.

Three hundred and thirty-five lactic acid bacteria were isolated from sour doughs and screened for antagonistic activity. Of these 145 showed activity against one or several of the indicator strains used in the screening. The antimicrobial activity of 18 isolates were due to a proteinaceous compound. These 18 isolates belonged to three different Lactobacillus species: Lactobacillus bavaricus, Lactobacillus curvatus and Lactobacillus plantarum. The spectrum of antimicrobial activity for the three species suggested that the inhibitory components were different. The inhibitory compound from Lact. bavaricus MI401 was chosen for further study. The proteinaceous nature, antimicrobial activity against closely-related species, heat resistance and sensitivity to alkaline treatment strongly indicated that this substance was a bacteriocin, which we designated bavaricin A. The bacteriocin was purified to homogeneity by ammonium sulphate precipitation, ion exchange, hydrophobic interaction and reverse-phase chromatography. The purification resulted in 193,000-fold increase in specific activity. SDS-PAGE of bavaricin A showed a molecular weight of 3500-4000 Da. By amino acid sequencing 41 amino acids were determined. Bavaricin A had a bactericidal mode of action and inhibited nine out of 10 Listeria monocytogenes. Lactobacillus bavaricus MI401 produced bavaricin A at temperatures from 4 degrees C to 30 degrees C. The production of active bavaracin A was inhibited at increasing sodium chloride concentration. In the presence of 3% sodium chloride at 4 degrees C no active bavaricin A could be detected. Nitrite (100 ppm) did not affect the production of active bavaricin A.

Amino Acid Sequence