[Detection of paraproteins in the cerebrospinal fluid of patients with paraproteinemia and the role of these proteins in the development of clinical symptoms].
Explore the source record for details and available documents.
Aged↗
Biomedical subjects
F Kilár
Publications and source records attributed to F Kilár.
Carrier-free zone electrophoresis, displacement electrophoresis and isoelectric focusing in a high-performance electrophoresis apparatus.
A characteristic feature of high-performance electrophoresis (HPE), the electrophoretic counterpart of high-performance liquid chromatography (HPLC), is that the separation chamber is a thin-walled, narrow-bore (0.05-0.3 mm) glass or fused-silica capillary tube for rapid dissipation of the Joule heat in order to minimize thermal zone deformation even at high field strengths. This paper is centered around the usefulness of HPE for separation in a carrier-free medium (i.e., in buffer alone) and deals with both zone electrophoresis, isoelectric focusing and displacement electrophoresis. Examples are given of analytical and micropreparative separations of inorganic and organic ions, proteins, viruses and bacteria. The run times are 5-30 min. Discontinuous buffer systems have up to now been used exclusively for the separation of proteins by electrophoresis in polyacrylamide gels ("disc electrophoresis"). However, the Ornstein and Davis discontinuous buffer system has been modified to adapt it to carrier-free zone electrophoresis in order to achieve automatic sharpening of the starting zone. Very high resolution of serum proteins was obtained when they were subjected to free high-performance disc electrophoresis in such a modified buffer system. To show that the HPE apparatus permits electrophoresis also in a gel medium, a polyacrylamide electrophoresis in SDS is presented. This experiment illustrates the difference between electropherograms obtained in free solution and in a molecular-sieving medium. Detection can be performed both on- and off-tube. The latter technique permits the rapid identification of the solutes by photodiode array spectrophotometry and the collection of fractions for further studies. The former detection method is simpler but mainly useful for analytical purposes. Non-UV-absorbing ions can be monitored with the aid of an on-tube UV detector if the run is performed in a UV-absorbing buffer.
Blood Proteins↗
Application of high-performance chromatographic and electrophoretic methods to the purification and characterization of glucose oxidase and catalase from Penicillium chrysogenum.
The high resolving power of the preparative and analytical high-performance chromatographic and electrophoretic methods recently developed in this laboratory for the separation of biopolymers has been demonstrated by the purification and characterization of glucose oxidase and catalase from Penicillium chrysogenum. Crude glucose oxidase was purified to homogeneity in one step by high-performance hydrophobic-interaction chromatography (HIC) on a pentylagarose column. Crude catalase was purified by a combination of HIC and high-performance anion-exchange chromatography on 3-diethylamino-2-hydroxypropylagarose. The homogeneity of the enzymes was monitored by high-performance electrophoresis and free zone electrophoresis. The pI values of these two enzymes determined by isoelectric focusing in the high-performance electrophoresis apparatus were 4.2 and 6.5, respectively. Their molecular weights were determined by high-performance molecular sieve chromatography on an agarose column. Glucose oxidase has a molecular weight of 175,000 and probably consists of two identical subunits, as sodium dodecyl sulphate polyacrylamide gel electrophoresis gave a molecular weight of around 72,000. The molecular weight of catalase, which is probably composed of non-identical subunits, as indicated by sodium dodecyl sulphate electrophoresis, is around 320,000. Some other characteristics of these two enzymes were also investigated, e.g., electrophoretic mobility, pH stability and optimum pH.
Amino Acids↗
Quantitative analysis of the interaction between immune complex and C1q complement subcomponent. The role of interdomain interactions in rabbit IgG in binding of C1q to immune precipitates.
A novel method was developed for the analysis of the interaction of large multivalent ligands with surfaces (matrices) to analyse the binding of complement subcomponent C1q to immune precipitates. Our new evaluation method provides quantitative data characteristic of the C1q-immune-complex interaction and of the structure of the immune complex as well. To reveal the functional role of domain-domain interactions in the Fc part of IgG the binding of C1q to different anti-ovalbumin IgG-ovalbumin immune complexes was studied. Immune-complex precipitates composed of rabbit IgG in which the non-covalent or covalent bonds between the heavy chains had been eliminated were used. Non-covalent bonds were abolished by splitting off the CH3 domains, i.e. by using Facb fragments, and the covalent contact was broken by reduction and alkylation of the single inter-heavy-chain disulphide bond. The quantitative analysis of the binding curves provides a dissociation constant (K) of 200 nM for the interaction between C1q and immune precipitate formed from native IgG. Surprisingly, for immune precipitates composed of Facb fragments or IgG in which the inter-heavy-chain disulphide bond had been selectively reduced and alkylated, stronger binding (K = 30 nM) was observed. In this case, however, changes in the structure of the immune-complex matrix were also detected. These structural changes may account for the strengthening of the C1q-immune-complex interaction, which can be strongly influenced by the flexibility and the binding-site pattern of the immune-complex precipitates. These results suggest that domain-domain interactions in the Fc part of IgG affect the segmental mobility of IgG molecules and the spatial arrangement of the immune-complex matrix rather than the affinity of individual C1q-binding sites on IgG.
Animals↗
Non-covalent interactions between Fab and Fc regions in immunoglobulin G molecules. Hydrogen-deuterium exchange studies.
To reveal non-covalent interactions between the Fab and Fc regions of IgG molecules the average conformational free-energy change (delta Go), associated with reversible micro-unfoldings, was measured by hydrogen-deuterium exchange for the Fab and Fc fragments and the complete molecule. Human monoclonal IgG1 and pooled IgG samples were used in these experiments. Hydrogen-deuterium exchange data were summarized and compared in the form of exchange relaxation spectra. The experimentally observed relaxation spectrum of intact IgG could not be deduced by weighted summation of spectra measured for Fab and Fc fragments. A comparison of the measured and calculated data revealed a 5-kJ/mol increase in the conformational free energy upon splitting the IgG molecule into two Fab and Fc pieces, i.e. an increase of conformational mobility occurred. This change can be explained either by related fluctuation patterns of the Fab and Fc pieces in the intact molecule or by a shielding effect on the contact surfaces. Both interpretations suppose non-covalent interactions between Fab and Fc that can be a means of information transduction between recognition and effector sites. The pH dependence of the hydrogen-deuterium exchange also indicates interactions between the Fab and Fc regions. A shift in the relaxation spectra of the Fab fragment was observed between pH 8.2 and 7.3 revealing destabilization of the structure at lower pH. This effect is absent in the intact molecule, reflecting interactions that stabilize the Fab structure. Comparison of the relaxation spectra of Fab and Fc shows a difference of about 10 kJ/mol in the microstability of these fragments: the Fab part possesses more conformational flexibility (i.e. its microstability is smaller) than the Fc part.
Deuterium↗
Conformation of human IgG subclasses in solution. Small-angle X-ray scattering and hydrodynamic studies.
The structure of six human myeloma proteins: IgG1(Bal), IgG2(Klu), IgG3(Bak), IgG3(Het), IgG4(Kov) and IgG4(Pol), was studied in solution using small-angle X-ray scattering and hydrodynamic methods. For IgG1(Bal) and IgG3(Het) the experimental data, including radius of gyration (Rg degree), radii of gyration of the cross-section (Rq1, Rq2), intrinsic viscosity [eta], sedimentation coefficient (S degree 20,w) and molecular mass, were interpreted in terms of structural models based on the Fab and Fc conformations, observed in crystal, by varying the relative positions of the Fab and Fc parts, i.e. their relative angles and distances. The values Rg degree = (6.00 +/- 0.05) nm, S degree 20,w = (6.81 +/- 0.10) S and [eta] = 0.0062 +/- 0.0005 cm3/mg obtained for IgG1(Bal) are compatible with a planar model in which the angle between the Fab arms is about 120 degrees. For IgG3(Het) the following data were obtained: Rg degree = (4.90 +/- 0.05) nm, S degree 20,w = (6.32 +/- 0.01) S and [eta] = (0.0065 +/- 0.0005) cm3/mg. The apparent contradiction between the higher molecular mass and lower Rg degree and S degree 20,w values for IgG3(Het) in comparison to IgG1(Bal) can be resolved by proposing a 'non-planar' (tetrahedral) molecular shape, in which the long hinge peptide is in a folded conformation and the two Fab and Fc parts are in a closely packed arrangement. In this model the angle between the two Fab arms is about 90 degrees, in the average position. The X-ray scattering and hydrodynamic behaviour of the IgG2 and IgG4 types of antibodies appeared to be similar to IgG1(Bal). The parameters of the two IgG3 proteins are similar while they are different to the others.
Amino Acids↗
The effect of iron binding on the conformation of transferrin. A small angle x-ray scattering study.
Distance distribution functions, p(r), radii of gyration, Rg, and radii of gyration of cross section, Rq, of apotransferrin, monoferric transferrin, and diferric transferrin have been compared. The alteration of Rg and Rq upon iron binding has been determined by a difference method. An unusual feature of the stepwise structural changes of transferrin upon iron saturation is that binding of the first ferric ion is responsible for more than half of the whole change in Rq, whereas Rg alters significantly only after the binding of the second ferric ion.
Humans↗
L-alanine dehydrogenase from Thermus thermophilus.
A heat-stable L-alanine dehydrogenase was isolated and purified from the extremely thermophilic microorganism, Thermus thermophilus, by affinity chromatography. The enzyme has a molecular weight of 290 000, as determined by the sedimentation equilibrium method, and is composed of six subunits of identical molecular weight as concluded from sodium dodecyl sulphate gel electrophoresis. The enzyme has been characterized in terms of pH- and substrate concentration-dependence of activity, substrate specificity, inhibition by D-alanine and D-cysteine and amino acid composition. The parameters obtained are very similar to those reported for L-alanine dehydrogenase from the mesophilic microorganism, Bacillus subtilis (Yoshida, A. and Freese, E. (1965) Biochim. Biophys. Acta 96, 248--262). The thermal stability of the T. thermophilus enzyme is much greater than that of the B. subtilis enzyme. Activation free energy (delta G), activation enthalpy (delta H) and activation entropy (delta S) values were determined for both the alanine deamination and for the heat inactivation reactions of the thermophilic and mesophilic enzymes. The values obtained for the catalytic reaction were practically equal. However, the two enzymes differed significantly in these parameters determined for the enzyme inactivation, which indicates that the factors ensuring the thermoresistance of the enzyme from T. thermophilus do not affect enzyme activity.
Alanine Dehydrogenase↗