Biomedical subjects

F Maestrelli

Publications and source records attributed to F Maestrelli.

13 recordsLinked to original sources

PubMed2006

Simultaneous effect of cyclodextrin complexation, pH, and hydrophilic polymers on naproxen solubilization.

The effect of pH variation on complexation and solubilization of naproxen (pK(a) 4.2) with natural betaCyclodextrin (betaCyD) and various neutral, cationic and anionic betaCyD-derivatives has been investigated. The combined effect of pH variation and hydrophilic polymer addition on CyD solubilizing and complexing efficiency has also been determined. Phase-solubility analysis in buffered aqueous solutions (pH from 1.1 to 6.5) was used to study the interaction of the drug with each CyD, in the presence or not of the water-soluble polymer. A clear influence of the substituent type was observed, the methylderivative being the most efficient agent; on the contrary, unexpectedly, no influence of the CyD charge in the interaction with the ionizable drug was detected. As expected, total drug solubility increased with increasing pH; however, the solubility increment with respect to drug alone obtained by CyD complexation progressively decreased, with a parallel reduction of the complex stability, attributed to the reduced affinity of charged drug for the hydrophobic CyD cavity. The addition of the polymer in part counterbalanced the destabilizing effect obtained with increasing pH, by improving the CyD complexation power towards naproxen. In particular, the presence of PVP allowed an increase of the complex stability constant with hydroxypropyl betaCyD up to 60% with respect to the corresponding drug-CyD binary system. Therefore, the combined strategy of pH control and polymer addition to the CyD complexing medium can be successfully exploited to improve naproxen solubilization and reduce the amount of CyD needed. The construction of theoretical drug solubility curves as a function of pH for any given CyD and polymer concentration enables selection of the best experimental conditions for obtaining the desired drug solubility value.

Hydrogen-Ion Concentration↗

PubMed2005

Influence of cyclodextrins and chitosan, separately or in combination, on glyburide solubility and permeability.

The effect of chitosan and of different concentrations of beta- or hydroxypropyl-beta-cyclodextrins, separately or in various (w/w) combinations, on the dissolution characteristics of glyburide (an oral hypoglycemic agent subject to incomplete and variable bioavailability) and on its permeability through Caco-2 cells has been investigated. Cyclodextrins (and particularly the hydroxypropyl-derivative, in virtue of its higher water solubility) were clearly more effective than chitosan in enhancing the drug dissolution properties: the aqueous glyburide solubility was improved 40-fold in the presence of 25 mM hydroxypropyl-beta-cyclodextrin, 25-fold in the presence of 13 mM beta-cyclodextrin (saturation solubility) and only 3-fold in the presence of chitosan at its saturation concentration (0.5% w/v). When chitosan and cyclodextrin were simultaneously present, a strong reduction of the cyclodextrin solubilizing efficiency towards the drug was observed, and it was attributed to a possible competition effect of polymer and glyburide for the interaction with the macrocycle. By contrast, permeation studies revealed that chitosan was more powerful than cyclodextrins in enhancing the glyburide permeability through Caco-2 cells. This was probably in virtue of the polymer's favourable effect on the tight junctions opening, as demonstrated by the significant decrease in the transepithelial electrical resistance recorded in its presence. Moreover, interestingly, when using the carriers together, conversely from solubility studies, a significant (P < 0.05) synergistic effect in enhancing glyburide apparent permeability was revealed in permeation experiments.

Algorithms↗

PubMed2005

Influence of formulation and process variables on in vitro release of theophylline from directly-compressed Eudragit matrix tablets.

Extended-release theophylline (TP) matrix tablets were prepared by direct compression of drug and different pH-dependent (Eudragit L100, S100 and L100-55) and pH-independent (Eudragit RLPO and RSPO) polymer combinations. The influence of varying the polymer/polymer (w/w) ratio and the drug incorporation method (simple blend or solid dispersion) was also evaluated. Drug release, monitored using the Through Flow Cell system, markedly depended on both the kind of Eudragit polymer combinations used and their relative content in the matrix. Maintaining a constant 1:1 (w/w) drug/polymers ratio, the selection of appropriate mixtures of pH-dependent and pH-independent polymers enabled achievement of a suitable control of TP release. In particular, matrices with a 0.7:0.3 w/w mixture of Eudragit L100-Eudragit RLPO showed highly reproducible drug release profiles, with an almost zero-order kinetic, and allowed 100% released drug after 360 min. As for the effect of the drug incorporation method, simple blending was better than the solid dispersion technique, which not only did not improve the release data reproducibility, but also caused, unexpectedly, a marked slowing down in drug release rate.

Acrylic Resins↗

PubMed2005

Interaction of naproxen with ionic cyclodextrins in aqueous solution and in the solid state.

The possible role of the cyclodextrin charge in the interaction with an acidic drug such as naproxen (pKa 4.8) has been evaluated. Sulfobutylether-beta-cyclodextrin (SBE-betaCyd) and trimethylammonium-beta-cyclodextrin (TMA-betaCyd) were selected as, respectively, anionically and cationically charged carriers and their performance was compared with that of the parent beta-cyclodextrin (betaCyd) and of its methyl-derivative (Me betaCyd) previously found as the best partner for the drug. Interactions in solution were investigated by phase-solubility, fluorescence and circular dichroism analyses. Equimolar drug-carrier products prepared by different techniques (blending, cogrinding, sealed-heating, colyophilization) were characterized by differential scanning calorimetry and X-ray powder diffractometry and tested for drug dissolution properties. Anionic charges of SBE-betaCyd did not negatively influence interactions in unbuffered aqueous solutions (pH approximately 5) with the acidic drug. In fact, it was a very effective carrier, exhibiting solubilizing and complexing properties considerably better than the parent betaCyd and comparable to those of Me betaCyd. On the contrary, the positive charges of TMA-betaCyd did not favour interactions with the counter-ionic drug (despite the presence of about 60% ionised drug) and it was less efficacious also than native betaCyd. Therefore, the role of the Cyd charge on the complexing and solubilizing properties towards naproxen was not important whereas other factors, such as steric hindrance effects and favourable hydrophobic interactions were significant in determining the drug affinity for the Cyd inclusion. Solid state studies evidenced similar amorphizing properties of both charged Cyds towards naproxen. On the other hand, dissolution tests, in agreement with solution studies, showed that all products with SBE-betaCyd exhibited significantly better dissolution properties than the corresponding ones with TMA-betaCyd. A clear influence of the preparation method of drug-Cyd solid systems on the performance of the end product was also observed. Colyophilization was the most effective technique, followed by the cogrinding one. Colyophilized product with SBE-betaCyd allowed a 10-times increase in drug dissolution efficiency (D.E.) (with respect to the five-times increase obtained with the corresponding coground product) and a reduction of t(50%) from about 60 min (for the coground product) to less than 2 min.

Cyclodextrins↗

PubMed2005

Determination of stability constant values of flurbiprofen-cyclodextrin complexes using different techniques.

Three new experimental approaches for calculating the stability constant (K(st)) of complexes of flurbiprofen with natural beta-cyclodextrin (betaCyd) and the hydroxyethyl- (HEbetaCyd) and the methyl- (Me betaCyd) derivatives were tested and compared to the classic phase-solubility procedure: (a) the membrane permeation technique through a lipophilic synthetic membrane permeable to the drug but not to the Cyd molecules, by analysing the permeation profiles with a non-linear least-squares method; (b) the affinity capillary electrophoresis (ACE) technique, where K(st) were calculated from the relationship between Cyd concentration in solution and drug electrophoretic mobility, using three different linear plotting methods; (c) the molecular modeling technique, based on the relationship between the docking energies and the experimental K(st) values. The study allowed evaluation of the advantages and limits of each examined method, providing a useful guide for the choice of the most suitable one depending on the kind of host-guest system to be investigated. The K(st) values obtained with the various techniques were rather different, probably due to the very different experimental conditions required by each one. However, all the methods indicated the methyl-derivative as the most powerful complexing agent for the drug, showing the general trend: K(st)(Me betaCyd)>>K(st)(HEbetaCyd)>K(st)(betaCyd). Only in the case of the ACE method was an inversion of the trend found between HEbetaCyd and betaCyd; this was probably due to the lower molecular weight of the natural Cyd, which, in this case, became more important in determining the complex electrophoretic mobility than the different affinity of the drug for these two Cyds.

Chemistry, Pharmaceutical↗

PubMed2005

Optimization of glibenclamide tablet composition through the combined use of differential scanning calorimetry and D-optimal mixture experimental design.

A systematic analysis of the influence of different proportions of excipients on the stability of a solid dosage form was carried out. In particular, a d-optimal mixture experimental design was applied for the evaluation of glibenclamide compatibility in tablet formulations, consisting of four classic excipients (natrosol as binding agent, stearic acid as lubricant, sorbitol as diluent and cross-linked polyvinylpyrrolidone as disintegrant). The goal was to find the mixture component proportions which correspond to the optimal drug melting parameters, i.e. its maximum stability, using differential scanning calorimetry (DSC) to quickly obtain information about possible interactions among the formulation components. The absolute value of the difference between the melting peak temperature of pure drug endotherm and that in each analysed mixture and the absolute value of the difference between the enthalpy of the pure glibenclamide melting peak and that of its melting peak in the different analyzed mixtures, were chosen as indexes of the drug-excipient interaction degree.

Calorimetry, Differential Scanning↗

PubMed2005

Characterization and dissolution properties of ketoprofen in binary and ternary solid dispersions with polyethylene glycol and surfactants.

The effect of incorporation of an anionic [sodium dodecyl sulfate (SDS) or dioctylsulfosuccinate (DSS)] or nonionic [Tween 60 (TW60)] surfactant on the properties of ketoprofen solid dispersions in polyethylene glycol 15000 (PEG) has been investigated. Physicochemical and morphological properties of the various solid systems were determined by differential scanning calorimetry, hot stage microscopy, X-ray powder diffraction analysis, and scanning electron microscopy. The results from dissolution studies, performed according to the USP 24 basket method, indicated that all ternary dispersed systems were significantly (p < 0.001) more efficacious than the corresponding binary ones, by virtue of the additive wetting and solubilizing effect due to the presence of the surfactant. The relative effectiveness of the incorporated surfactant was in the same order as found in phase-solubility studies (i.e., SDS > DSS > TW60). With regard to the solid dispersion preparation method, coevaporated products always gave better results than the corresponding cofused ones; however, this effect was statistically significant (p < 0.001) only in the initial phase of the dissolution process. The most effective solid dispersion was the 10-80-10 w/w drug-PEG-SDS ternary coevaporate, which allowed dissolution of 50% drug after only 6 min (in comparison with > 120 min for drug alone and 17 min for the binary coevaporate) and dissolution of about 100% drug after 30 min (in comparison with > 120 min for the binary coevaporate).

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2004

Photostability studies on nicardipine-cyclodextrin complexes by capillary electrophoresis.

Nicardipine (NC)-cyclodextrin solid systems were prepared in equimolar ratios and their photostability in aqueous solution under exposure to UV(A)-UV(B) radiations was evaluated. The photodegradation process was monitored by a capillary electrophoresis (CE) method able to provide the enantioresolution of the rac-nicardipine. Enantioresolution was achieved using the mixture 3.0% sulfate-beta-cyclodextrin (SbetaCD) and 2.0% heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMbetaCD) as chiral selector in 20mM triethanolammonium phosphate solution (pH 3.0). The photostability studies were carried out on inclusion complexes of rac-nicardipine with alpha-cyclodextrin (alphaCD), beta-cyclodextrin (betaCD), gamma-cyclodextrin (gammaCD), hydroxypropyl-alpha-cyclodextrin (HPalphaCD), hydroxypropyl-beta-cyclodextrin (HPbetaCD), hydroxypropyl-gamma-cyclodextrin (HPgammaCD), (2-hydroxyethyl)-beta-cyclodextrin (HEbetaCD) and methyl-beta-cyclodextrin (MbetaCD). A photoprotective effect was observed by betaCD, HPalphaCD, HEbetaCD, whereas gammaCD, MbetaCD, HPbetaCD and HPgammaCD did not affect the nicardipine photostability. Conversely, alphaCD was found to favour the drug photodegradation. Evidences for CDs-mediated stereoselective photodegradation of rac-nicardipine were observed only for the beta-CD complex. In this case, two distinct photodegradation profiles, with two different kinetic constants (k), were observed for the nicardipine enantiomers.

Biotransformation↗

PubMed2004

Influence of chitosan and its glutamate and hydrochloride salts on naproxen dissolution rate and permeation across Caco-2 cells.

Chitosan and its glutamate and hydrochloride salts were evaluated for their efficacy in improving the dissolution behaviour of naproxen (a poorly water-soluble antiinflammatory drug) and its transport in vitro across Caco-2 cell monolayers. Drug-polymer physical mixtures and coground products, prepared at two different w/w ratios (30/70 and 10/90), were characterized by differential scanning calorimetry, X-ray powder diffractometry, scanning electron microscopy, and tested for dissolution properties. Coground systems were more effective than physical mixtures in improving drug dissolution and chitosan base, in spite of its lower water solubility, showed higher solubilizing power than its salts. According to the solid state analyses results, this effect was directly related to its stronger amorphizing power. Transport studies showed that only coground mixtures with chitosan glutamate salt allowed a significant drug apparent permeability improvement; however, they did not exhibit appreciable effects on the Caco-2 tight junctions (measured by the trans-epithelial electrical resistance variations), thus indicating that their enhancer effect was mainly due to an improved naproxen transport by transcellular passive diffusion rather than through the paracellular route. The direct compression properties and antiulcerogenic activity together with the demonstrated dissolution and permeation enhancer abilities toward naproxen make chitosan glutamate an optimal carrier for developing fast-action oral solid dosage forms of this drug.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2004

Formulation and characterization of triclosan sub-micron emulsions and nanocapsules.

Triclosan, a non-ionic, broad spectrum anti-microbic agent, has recently demonstrated its effectiveness as an anti-malarial drug by inhibition of the growth of Plasmodium Falciparum. The aim of this work was to formulate suitable triclosan colloidal carriers with the final objective of obtaining a drug delivery system suitable for a potential anti-malarial oral treatment. Two different nanotechnological approaches were experimented with that could be suitable for developing effective triclosan formulations against this established and re-emerging infectious disease. Sub-micron emulsions were prepared by the solvent displacement method, using different oily amounts in order to vary the drug amount entrapped in the formulation. Chitosan-coated nanocapsules were obtained with chitosan hydrochloride at two different viscosity degrees (Cl 113 and Cl 213). All formulations were appropriately characterized by determining drug loading capacity and encapsulation efficiency and measuring particle size and zeta potential. Morphological characterization of the different systems was performed by TEM analysis, whereas release studies were carried out by reverse bag dialysis method. All preparations resulted stable. Cl 113-coated nanocapsules appeared particularly suitable as triclosan carriers for obtaining a systemic drug release, owing to both chitosan's good mucoadhesive and enhancer properties as well as the effectiveness shown by its coating in adequately controlling drug release rate.

Antimalarials↗

PubMed2004

Development and evaluation of glyburide fast dissolving tablets using solid dispersion technique.

Glyburide is a poorly water-soluble oral hypoglycemic agent, with problems of variable bioavailability and bio-inequivalence related to its poor water-solubility. This work investigated the possibility of developing glyburide tablets, allowing fast, reproducible, and complete drug dissolution, by using drug solid dispersion in polyethylene glycol. Phase-solubility studies were performed to investigate the drug-carrier interactions in solution, whereas differential scanning calorimetry, X-ray powder diffraction, and infrared spectroscopy were used to characterize the solid state of solid dispersions. The effects of several variables related to both solid dispersion preparation (cofusion or coevaporation technique, drug-to-carrier ratio, polyethylene glycol molecular weight) and tablet production (direct compression or previous wet-granulation, tablet hardness, drug, and solid dispersion particle size) on drug dissolution behavior were investigated. Tablets obtained by direct compression, with a hardness of 7-9 Kp, and containing larger sized solid dispersions (20-35 mesh, i.e., 850-500 microm) of micronized glyburide in polyethylene glycol 6000 prepared by the cofusion method gave the best results, with a 135% increase in drug dissolution efficiency at 60 min in comparison with a reference tablet formulation containing the pure micronized drug. Moreover, the glyburide dissolution profile from the newly developed tablets was clearly better than those from various commercial tablets at the same drug dosage.

Calorimetry, Differential Scanning↗

PubMed2003

Optimization of dissolution test precision for a ketoprofen oral extended-release product.

An example of application of experimental design methodologies to the set up of dissolution test conditions for a new ketoprofen oral extended-release dosage form is presented. The aim of the work was to find the best experimental conditions, using a USP apparatus 2 (paddle), for maximizing the method precision as degree of repeatability. The considered factors mainly influencing the dissolution test results were pH and volume of dissolution medium, and paddle stirring speed. Two distinct 4-run Plackett-Burman designs were carried out: one at gastric and the other at intestinal pH values. Each run was performed in triplicate in order to calculate the standard deviations of the drug dissolution efficiency at 60 and 120 min, selected as responses to be minimized. Optimum conditions to carry out the dissolution test were: 900 ml volume of dissolution medium and 70 rpm paddle stirring speed for both environments and pH 1 and 5.5, for the gastric and intestinal environment, respectively.

Administration, Oral↗

PubMed2002

Characterization of physicochemical properties of naproxen systems with amorphous beta-cyclodextrin-epichlorohydrin polymers.

Ground mixtures of naproxen with amorphous beta-cyclodextrin-epichlorohydrin soluble (betaCd-EPS) or insoluble cross-linked (betaCd-EPI) polymers were investigated for both solid phase characterization (Differential Scanning Calorimetry, powder X-ray Diffractometry) and dissolution properties (dispersed amount method). The effect of different grinding conditions and of drug-to-carrier ratio was also evaluated. Co-grinding induced a decrease in drug crystallinity to an extent which depended on the grinding time, and was most pronounced for the cross-linked insoluble polymer, particularly in combinations at the lowest drug content. Both cyclodextrin polymers were more effective in improving the naproxen dissolution properties, not only than the parent betaCd but also than hydroxyalkyl-derivatives, and their performance was almost comparable to that of methyl-derivatives, previously found as the best carriers for naproxen. Dissolution efficiencies of naproxen from physical mixtures with betaCd-EPS, thanks to the high water solubility of this Cd-derivative, were up to three times higher than those from the corresponding products with betaCd-EPI. However this difference in their performance became much less evident in co-ground products and tended to progressively diminish with increasing the polymer content in the mixture, according to the better amorphizing power shown by betaCd-EPI during the co-grinding process. The 10/90 (w/w) drug-carrier co-ground products exhibited the best dissolution properties, giving dissolution efficiencies about 30 times higher than that of naproxen alone.

Anti-Inflammatory Agents, Non-Steroidal↗