PubMed Health⌕ Search

Biomedical subjects

F Pariente

Publications and source records attributed to F Pariente.

15 recordsLinked to original sources
PubMed2006

Microscopic and voltammetric characterization of bioanalytical platforms based on lactate oxidase.

A microscopic and voltammetric characterization of lactate oxidase- (LOx-) based bioanalytical platforms for biosensor applications is presented. In this context, emphasis is placed on amperometric biosensors based on LOx that have been immobilized by direct absorption on carbon surfaces, in particular, glassy carbon (GC) and highly ordered pyrolytic graphite (HOPG). The immobilized LOx layers have been characterized using atomic force microscopy (AFM) under liquid conditions and cyclic voltammetry. In addition, spatially resolved mapping of enzymatic activity has been carried out using scanning electrochemical microscopy (SECM). In the presence of lactate with hydroxymethylferrocene (HMF) as a redox mediator in solution, biosensors obtained by direct adsorption of LOx onto GC electrodes exhibited a clear electrocatalytic activity, and lactate could be determined amperometrically at 300 mV versus SSCE. The proposed biosensor also exhibits good operating performance in terms of linearity, detection limit, and lifetime.

Bacterial Proteins↗
PubMed2006

Comprehensive study of bioanalytical platforms: xanthine oxidase.

A comprehensive study of a general bioanalytical platform for biosensor applications is presented using xanthine oxidase (XnOx) as a case study within the framework of developing approaches of broad applicability. In this context, emphasis is placed on amperometric biosensors based on XnOx, which has been immobilized by covalent binding to gold electrodes modified with dithiobis-N-succinimidyl propionate. The immobilized XnOx layers have been characterized using atomic force microscopy under liquid conditions and quartz crystal microbalance techniques. In addition, spatially resolved mapping of enzymatic activity has been carried out using scanning electrochemical microscopy. Redox dyes of phenothiazine derivatives, specifically, thionine and methylene blue, have been found to work well as electron acceptors for reduced XnOx. The kinetic parameters and equilibrium constants of the mediated enzymatic oxidation of xanthine in the presence of the above-mentioned redox dyes have been calculated. The response of the enzymatic electrode to varying xanthine concentrations has been obtained in the presence of thionine or methylene blue as redox mediator in solution. Under these conditions, xanthine could be determined amperometrically at +0.2 V versus SSCE.

Biosensing Techniques↗
PubMed2005

DNA biosensor for detection of Helicobacter pylori using phen-dione as the electrochemically active ligand in osmium complexes.

A surface-based method for the study of the interactions of DNA with redox-active 1,10-phenantroline-5,6-dione (phen-dione) osmium complexes is described. The study was carried out using gold electrodes modified with DNA via adsorption and [Os(bpy)(2)(phe-dione)](3+/2+) (bpy = 2,2'-bipyridyl) or [Os(phen)(2)(phen-dione)](3+/2+) (phen = 1,10-phenantroline) as electrochemical reported molecules. The method, which is simple and reagent-saving, allows the accumulation of osmium complexes within the DNA layer. The amount of osmium complex bound by the adsorbed layer of DNA was determined from the voltammetric charge associated with the osmium redox process of the immobilized metal complex. The quinone moiety of the phen-dione ligand was useful as an indicator for electrochemical DNA sensing because of its redox response at low potentials. A thiol-linked single-stranded Helicobacter pylori DNA probe was immobilized, through S-Au bonds on to a gold electrode (density of modification 86 pmol/cm(2)). Following hybridization with the complementary DNA sequence, the osmium complex was electrochemically accumulated within the double-stranded DNA layer. Electrochemical detection was performed by differential pulse voltammetry over the potential range where the quinone moiety was redox active (i.e., at very low potentials, -0.020 V vs SSCE); with this approach, a sequence of the H. pylori could be quantified over the range from 5 to 20 pmol with a linear correlation of r = 0.9888 and a detection limit of approximately 6 pmol.

Biosensing Techniques↗
PubMed2005

Electrochemical DNA sensing using osmium complexes as hybridization indicators.

A surface-based method for the study of the interactions of DNA with redox-active osmium complexes is described. The study was carried out using gold electrodes modified with DNA by adsorption and [Os(bpy)3]3+/2+ (bpy=2,2'-bipyridyl) or [Os(phen)3]3+/2+ (phen=1,10-phenantroline) as electrochemical indicators. The method, which is simple and reagent saving, allows the accumulation of osmium complexes on the DNA layer. The amount of osmium complex bound by the layer of double-stranded (dsDNA) or single-stranded DNA (ssDNA) adsorbed at gold electrodes was estimated from the cyclic voltammetric (CV) peak charge of osmium complex reduction. The dissociation constants (K) for the oxidized and reduced forms of a bound species are also estimated. [Os(phen)3]3+/2+ was applied to a probe for electrochemical DNA sensing. A thiol-linked single-stranded DNA probe was immobilized through the S-Au bonding to 70 pmol/cm2 on a gold electrode. Following hybridization with the complementary DNA, the osmium complex was electrochemically accumulated on the double-stranded DNA layer and the differential pulse voltammogram for this electrode gave an electrochemical signal due to the redox reaction of [Os(phen)3]3+/2+ that was bound to the double-stranded DNA on the electrode.

Adsorption↗
PubMed2002

Electrocatalytic oxidation of nitric oxide at indium hexacyanoferrate film-modified electrodes.

The electrocatalytic oxidation of nitric oxide (NO) by indium (III) hexacyanoferrate (III) films has been studied. These films are electrodeposited onto glassy carbon electrodes through potential cycling in acidic solutions containing a potassium electrolyte, indium (III), and potassium hexacyanoferrate. The resulting modified electrodes exhibit a reversible redox response ascribed to the oxidation/reduction of iron atoms presents in the electrodeposited film. The films have a potent and persistent electrocatalytic activity towards NO oxidation at neutral pH. The electrocatalytic oxidation of NO takes place at potentials around +0.75 V which represents a moderate diminution in the overpotential. In addition, interferences due to the presence of nitrate and nitrite have been significantly reduced. According to these results, the described modified electrodes have been used as sensors for the determination of NO generated by decomposition of a typical NO-donor, such as S-nitroso- N -acetyl- d, l -penicillamine (SNAP).

Journal Article↗
PubMed2000

Biosensors based on membrane-bound enzymes immobilized in a 5-(octyldithio)-2-nitrobenzoic acid layer on gold electrodes.

Gold electrodes were modified through chemisorption of 5-(octyldithio)-2-nitrobenzoic acid (ODTNB). ODTNB includes a long chain in a short-length thio acid, providing a heterogeneous-like alkanethiol layer after adsorption on gold electrodes. Membrane-bound enzymes, in particular D-fructose dehydrogenase (FDH), D-gluconate dehydrogenase (GADH), and L-lactic dehydrogenase (cytochrome b2) (Cyb2), were immobilized onto ODTNB-modified gold electrodes simply by adsorption. The short-length thio acid may provide electrostatic interactions with enzyme surface charges, while the alkanethiolate enables hydrophobic interaction with the largely lipophilic, membrane-bound enzymes. The immobilization of FDH, GADH, and Cyb2 onto ODTNB-modified gold surfaces has been studied with the quartz crystal microbalance (QCM). Spectrophotometric and electrochemical assays indicate that the immobilized enzyme retains its enzymatic activity after immobilization onto the ODTNB-modified gold surface. The amount of immobilized (and active) enzyme was estimated from QCM to be of the order of 2.5 x 10(-12)-5.3 x 10(-12) mol x cm(-2). A fructose biosensor was developed, making use of a gold surface modified with ODTNB and fructose dehydrogenase, employing hydroxymethylferrocene as a mediator in solution. Calibration curves exhibited a linear relation between the biosensor response and the substrate concentration up to 0.7 mM. Statistical analysis gave an excellent linear correlation (r = 0.9993) and a sensitivity of 6.1 mM(-1) fructose. The biosensor shows a significant stable catalytic current for at least 25 days.

Biosensing Techniques↗
PubMed1999

Dithiobissuccinimidyl propionate as an anchor for assembling peroxidases at electrodes surfaces and its application in a H2O2 biosensor.

Exposure of gold surfaces to solutions of dithiobis N-succinimidyl propionate (DTSP) gives rise to the modification of the surface with N-succinimidyl-3-thiopropionate (NSTP) which can, in turn, react with amino groups allowing for the covalent immobilization of enzymes such as horseradish peroxidase (HRP). The coverage of NSTP has been estimated to be of the order of 1.3 x 10(-10) from the charge consumed during its reductive desorption. The binding reaction of HRP with NSTP modified gold surfaces has been studied with the quartz crystal microbalance, and the results suggest that the immobilization process involves two steps in which the first (faster) appears to correspond to the rapid incorporation of the enzyme whereas the second is likely due to the slow incorporation of additional enzyme and/or reorganization of the immobilized layer. Spectrophotometric and electrochemical assays indicate that the immobilized HRP retains its enzymatic activity after immobilization onto the DTSP modified gold surface. The amount of immobilized (and active) HRP was estimated from QCM and spectrophotometric measurements to be of the order of 1.5 x 10(-11) mol/cm2. A peroxide biosensor was developed making use of a gold surface modified with DTSP and HRP employing Os and Ru complexes of 1,10-phenanthroline 5,6-dione (phen-dione) of the type [M(phendione)x(L)3-x]+2 (where L = 1,10-phenanthroline or 2,2'-bipyridine, x = 1-3) as mediators with the quinone moieties being the active component. The efficiency of the mediators increased with increasing number of phendione ligands.

Adsorption↗
PubMed1998

Analytical strategies for amperometric biosensors based on chemically modified electrodes.

Various strategies based on the use of chemically modified electrodes for the development of amperometric biosensors are described. Particular emphasis is placed on materials capable of catalyzing the oxidation of NADH and coupling these with enzymatic activities for biosensor construction. In terms of electrocatalysts, the discussion will centre on electrodeposited films of 3,4-dihydroxy benzaldehyde (3,4-DHB) and related analogs as well as on electrodeposited films of transition metal complexes of 1,10-phenanthroline-5,6-dione (phen-dione). Electrodeposited films of these materials have been coupled to the enzymatic activity of aldehyde dehydrogenase and alcohol dehydrogenase for the development of biosensors for aldehydes and ethanol, respectively.

Alcohol Dehydrogenase↗
PubMed1997

A nitrite biosensor based on a maltose binding protein nitrite reductase fusion immobilized on an electropolymerized film of a pyrrole-derived bipyridinium.

The preparation and electrochemical characterization of glassy carbon electrodes (GCEs) modified with electropolymerized films of the cation N-(3-pyrrol-1-yl-propyl)-4,4'-bipyridine (PPB) are described. The behavior of a new biosensor, which exhibits a high catalytic activity for nitrite reduction and which consists of a maltose binding protein nitrite reductase fusion (MBP-Nir) immobilized on an electropolymerized film of PPB as an electrocatalyst, is also described. The insoluble perchlorate salt of the poly(benzyl viologen) dication was used to immobilize MBP-Nir onto an electrode previously modified with an electropolymerized film of PPB. The electropolymerized film of PPB on the GCE is redox active and exhibits special electron-transfer properties toward the MBP-Nir layer but not toward Nir (Nir without MBP fusion attached), suggesting an intimate interaction between the PPB film and the MBP-Nir layer. The kinetics of the catalytic reaction between the biosensor and nitrite anion were characterized using cyclic voltammetry and rotated disk electrode techniques, and a value of (4.6 +/- 0.5) x 10(3) M-1 S-1 was obtained for the rate constant.

Biosensing Techniques↗
PubMed1996

Electrocatalytic reduction of nitric oxide at electrodes modified with electropolymerized films of [Cr(v-tpy)2]3+ and their application to cellular NO determinations.

Nitric oxide can be electrocatalytically reduced at electrodes modified with electropolymerized films of [Cr(v-tpy)2]3+. Upon further modification with a thin film of Nafion (to prevent interferences from anions, especially nitrite), these electrodes can be employed as NO sensors in solution with submicromolar detection limits and fast response. We have carried out preliminary studies of cellular NO release from Rhodobacter sphaeroides bacterial cells with excellent results.

Catalysis↗
PubMed1996

Enzyme support systems for biosensor applications based on gold-coated nylon meshes.

A novel experimental protocol for enzyme immobilization based on the use of a very permeable support is described and applied to the development of an acetylcholinesterase (AChE) based biosensor. In this system, the enzyme was immobilized onto a gold-coated nylon mesh via a self-assembled monolayer of a bifunctional reagent, cystamine, preadsorbed onto the gold surface. This support has been characterized by optical microscopy and electrochemical measurements of permeability. In the assembled biosensor, the AChE modified mesh was placed over a glassy carbon electrode and the response to 4-aminophenylacetate, used as substrate, was monitored via the enzymatic reaction product, 4-aminophenol, by oxidation at +0.25 V vs. SSCE. This approach to biosensor design has been extended to the determination of organophosphorus and carbamate pesticides by their inhibition of AChE enzymatic activity.

Acetylcholinesterase↗
PubMed1994

Subcellular localization of the segment polarity protein patched suggests an interaction with the wingless reception complex in Drosophila embryos.

The product of the segment polarity gene patched is a transmembrane protein involved in the cell communication processes that establish polarity within the embryonic segments of Drosophila. Monoclonal antibodies have been raised against the patched protein, and by immunoelectron microscopy part of the patched staining is found associated with discrete regions of the lateral plasma membrane of the embryonic epidermal cells. Using a mutation affecting endocytosis (shibire) we find that patched is a membrane-bound protein, which is internalized by endocytosis, and that the preferential sites of accumulation resemble the described localization of the cell-cell adhesive junctions of the epidermal cells. patched partially co-localizes with the wingless protein in the wingless-expressing and nearby cells, in structures that seem to be endocytic vesicles. These data suggest the interaction of patched protein with elements of the reception complex of wingless, as a way to control the wingless expression.

Animals↗
PubMed1987

Effects of ATP and cyclic AMP on the in vitro assembly and stability of mammalian brain microtubules.

The relevance of protein phosphorylation, transphosphorylation and binding phenomena in the kinetics of the ATP-induced assembly of cycle-purified microtubule protein from mammalian brain were studied. ATP was able to induce the polymerization of microtubules of normal appearance. However, the assembled structures, were unstable and microtubules depolymerized after achievement of a transitory maximum. Cyclic AMP reduced the amplitude of the polymerization maximum in a concentration-dependent manner, correlating with the stimulation of the endogenous phosphorylation reaction. When microtubule assembly was induced by GTP, in the presence of various concentrations of ATP, the slope of the depolymerization phase was found to depend on the concentration of ATP. Fluoride ion inhibited the endogenous phosphorylation reaction and reduced the disassembly rate, in a concentration-dependent manner. Evidence is also presented indicating that ATP did not bind to phosphocellulose-purified tubulin. These results further contribute to indicate that ATP and cyclic AMP, acting coordinately to control the phosphorylation extent of microtubule proteins are important factors to determine microtubule stability within the cell. Some implications of this mechanism for the regulation by cAMP of the initiation of DNA synthesis and mitosis are considered.

Adenosine Triphosphate↗
PubMed1984

Mammalian brain microtubules are sensitive to cyclic AMP in vitro.

Microtubules assembled in vitro with ATP were depolymerized by the addition of cyclic AMP, which correlates with a stimulation of the endogeneous phosphorylation reaction. When assembled with GTP, however, microtubules were only sensitive to cyclic AMP when ATP was present. This nucleoside triphosphate induced the disassembly of microtubules in a concentration-dependent, cyclic nucleotide-stimulated manner. Since UTP, CTP and the nonhydrolyzable ATP analog adenosine-5'-(beta, gamma-methylene)triphosphate were without comparable effect, it was assumed that phosphorylation of the microtubule-associated proteins may represent a physiological mechanism by which microtubules in the living cell respond to external stimuli.

Adenosine Triphosphate↗