Biomedical subjects

F Pattus

Publications and source records attributed to F Pattus.

At least 19 recordsLinked to original sources

PubMed1992

Spectroscopic study of the activation and oligomerization of the channel-forming toxin aerolysin: identification of the site of proteolytic activation.

The channel-forming protein aerolysin is secreted as a protoxin which can be activated by proteolytic removal of a C-terminal peptide. The activation and subsequent oligomerization of aerolysin were studied using a variety of spectroscopic techniques. Mass spectrometric determination of the molecular weights of proaerolysin and aerolysin permitted identification of the sites at which the protoxin is processed by trypsin and chymotrypsin. The results of far- and near-UV circular dichroism measurements indicated that processing with trypsin does not lead to major changes in secondary or tertiary structure of the protein. An increase in tryptophan fluorescence intensity and a small red shift in the maximum emission wavelength of tryptophans could be observed, suggesting that there is a change in the environment of some of the tryptophans. There was also a dramatic increase in the binding of the hydrophobic fluorescent probe 1-anilino-8-naphthalenesulfonate during activation, leading us to conclude that a hydrophobic region in the protein is exposed by trypsin treatment. Using measurements of light scattering, various parameters influencing oligomerisation of trypsin-activated aerolysin were determined. Oligomerization rates were found to increase with the concentration of aerolysin, whereas they decreased with increasing ionic strength.

Aeromonas hydrophila↗

PubMed1992

Brominated phospholipids as a tool for monitoring the membrane insertion of colicin A.

The intrinsic fluorescence of the colicin A thermolytic fragment does not change after insertion into normal phospholipid vesicles and is thus an unsuitable probe for monitoring the membrane insertion process. In this paper, we report the results of studies on the quenching of this fluorescence by brominated dioleoylphosphatidylglycerol (Br-DOPG) vesicles. Bromine atoms located at the midpoint of the phospholipid acyl chain quench the tryptophan fluorescence, indicating contact between fluorophores of the protein and the bilayer's hydrophobic core. Addition of Br-DOPG vesicles to a protein solution quenches the tryptophan fluorescence in a time-dependent manner. This quenching can be fitted to a single-exponential function, and thus interpreted as a one-step process. This allows calculation of an apparent rate constant of protein insertion into the membrane. Parameters known to affect the insertion of the thermolytic fragment into phospholipid monolayers or vesicles (pH and negative charge density) also affect the rate constant in comparable ways. In addition to the information gained concerning membrane exposure in the steady state, this approach provides the first real-time method for measuring the insertion of colicin into membranes. It is highly quantitative and can be used on all versions of the protein, e.g., full size, proteolytic fragments, and mutants. Brominated lipids provide experimental conditions identical to normal lipids and allow for great flexibility in protein/lipid ratios and concentrations. The kinetic analysis shows clearly the existence of a two-step process involving a rapid adsorption of the protein to the lipid surface followed by a slow insertion.

Citrobacter freundii↗

PubMed1992

The membrane insertion of colicins.

Pore-forming toxins, such as colicin A, are water-soluble proteins that insert into lipid bilayers. The water-soluble structure of Colicin A is known at a high resolution and this review describes the kinetic and structural steps involved in its soluble-to-membrane bound transformation.

Cell Membrane↗

PubMed1992

Refined structure of the pore-forming domain of colicin A at 2.4 A resolution.

The E1 subgroup (E1, A, B, IA, IB, K and N) of anti-bacterial toxins called colicins is known to form voltage-dependent channels in lipid bilayers. The crystal structure of the pore-forming domain of colicin A from Escherichia coli has been refined to the diffraction limit of the crystals at 2.4 A resolution by means of molecular dynamics and restrained least-squares methods to a conventional R-factor of 0.18 for all data between 6.0 and 2.4 A resolution. The polypeptide chain of 204 amino acid residues consists of ten alpha-helices organized in a three-layer structure. The helices range in length from 9 to 23 residues with an average length of 125 residues. The packing arrangement of the helices has been analysed; the packing is different from that observed in four-helix bundle proteins. The sites of 83 water molecules have been located and refined. Analysis of the structure provides insights into the mechanism of formation of a voltage-gated channel by the protein. Although it is proposed that substantial tertiary structural changes occur during membrane insertion, the secondary structural elements remain conserved. This idea has been proposed recently for a number of other protein-membrane events and thus may have more general applicability.

Amino Acid Sequence↗

PubMed1992

The aerolysin membrane channel is formed by heptamerization of the monomer.

The cytolytic toxin aerolysin has been found to form heptameric oligomers by SDS-PAGE electrophoresis, STEM mass measurements of single oligomers and image analysis of two-dimensional membrane crystals. Two types of crystal, flat sheets and long regular tubes, have been obtained by reconstitution of purified protein and Escherichia coli phospholipids. A noise-filtered image of the best crystalline sheets reveals a structure with 7-fold symmetry containing a central strongly stain-excluding ring that encircles a dark stain-filled channel 17 A in diameter. The ring is surrounded by seven arms each made up of two unequal sized domains. By combining projected views and side-views, a simplified model of the aerolysin channel complex has been constructed. The relevance of this structure to the mode of action of aerolysin is discussed.

Bacterial Toxins↗

PubMed1992

Primary and secondary structure of the pore-forming peptide of pathogenic Entamoeba histolytica.

A pore-forming peptide is implicated in the potent cytolytic activity of pathogenic Entamoeba histolytica. Using NH2-terminal sequence information of this peptide, the corresponding cDNA was isolated. The cDNA-deduced amino acid sequence revealed a putative signal peptide and a mature peptide of 77 amino acids including six cysteine residues. Computer-aided secondary structure analysis predicted that the peptide would be composed of four adjacent alpha-helices, and CD spectroscopy indicated an all alpha-helical conformation. The tertiary structure appears to be stabilized by three disulfide bonds; the pore-forming activity was not sensitive to heat but was lost in the presence of reducing agents. Sequence homology was found to the saposins and to surfactant-associated protein B, both mammalian polypeptides of similar size and secondary structure but of non-lytic function. In particular, the six cysteine residues were found to be conserved, suggesting a common motif for stabilizing a favourable tertiary structure. Compared with previously characterized toxic peptides also containing three disulfide bonds, the amoeba peptide may represent a distinct class of biologically active peptides.

Amino Acid Sequence↗

PubMed1992

Purification of Aeromonas hydrophila major outer-membrane proteins: N-terminal sequence analysis and channel-forming properties.

Four outer-membrane proteins of Aeromonas hydrophila were purified and their N-terminal sequences and channel-forming properties were determined. Three could be matched with proteins from other species. One was a maltoporin, as its level increased when cells were grown in maltose-containing media, and the channel it formed was blocked by maltose. Another was like OmpF and OmpC of Escherichia coli, except that its channel fluctuated much more rapidly. The third protein, which was produced in low-phosphate medium, exhibited several properties of the general anion porin PhoE. The fourth showed no similarity to any known proteins. It had a unique N-terminus and it formed small sharply-defined cation-selective channels. Two other proteins which corresponded to OmpW of Vibrio cholerae and E. coli OmpA were partly characterized.

Aeromonas hydrophila↗

PubMed1991

A 'molten-globule' membrane-insertion intermediate of the pore-forming domain of colicin A.

The 'molten' globular conformation of a protein is compact with a native secondary structure but a poorly defined tertiary structure. Molten globular states are intermediates in protein folding and unfolding and they may be involved in the translocation or insertion of proteins into membranes. Here we investigate the membrane insertion of the pore-forming domain of colicin A, a bacteriocin that depolarizes the cytoplasmic membrane of sensitive cells. We find that this pore-forming domain, the insertion of which depends on pH, undergoes a native to molten globule transition at acidic pH. The variation of the kinetic constant of membrane insertion of the protein into negatively charged lipid vesicles as a function of the interfacial pH correlates with the appearance of the acidic molten globular state, indicating that this state could be an intermediate formed during the insertion of colicin A into membranes.

Colicins↗

PubMed1991

Fluorescence energy transfer distance measurements using site-directed single cysteine mutants. The membrane insertion of colicin A.

The ion-channel-forming C-terminal fragment of colicin A binds to negatively charged lipid vesicles and provides an example of insertion of a soluble protein into a lipid bilayer. The soluble structure is known from X-ray crystallography and consists of a ten-helix bundle containing a hydrophobic helical hairpin. In this work fluorescence spectroscopy was used to study the membrane-bound structure. An extrinsic probe, N'-(iodoacetyl)-N'-(5-sulfol-naphthyl)ethylenediamine (IAEDANS) was attached to mutant proteins each of which bears a unique cysteine residue. Three mutants K39C (helix 2), T127C (between helices 6 and 7) and S16Crpt (helix 1, which bears a decapeptide repeat before the mutation) gave useful derivatives. In the soluble protein they showed emission wavelengths decreasing in the order K39C greater than T127C greater than S16Crpt and although all showed blue shifts on addition of dimyristoylphosphatidylglycerol (DMPG) this order was maintained in the membrane-bound state. These shifts were not indicative of deep membrane insertion. Polarization of IAEDANS revealed differences in mobility between mutants. The three tryptophan residues were used as a compound donor to IAEDANS in resonance energy transfer distance determinations. The values obtained for the soluble form were 1.2 A to 3.2 A longer than in the crystal structure. On addition of lipids the indicated distances increased: S16Crpt-I(AEDANS) 6.45 A (22%), K39C-I 5.45 A (18%) and T127C-I 2.4 A (14%). N-bromosuccinimide (NBS) completely abolishes the tryptophan emission from the thermolytic fragment. When lipids were added to a mixture containing ten NBS-treated channel-forming fragments to one IAEDANS labelled fragment the indicated distances increased rather more: S16Crpt-I 9.7 A (38%), K39C-I 8.1 A (36%) and T127C-I 2.5 A (16%). This showed that intermolecular transfer reduces the distance estimated in samples containing only labelled protein. The ensemble of results shows that the amphipathic helices of the C-terminal fragment open out on the surface of the lipid bilayer during the initial phase of membrane insertion.

Colicins↗

PubMed1991

Membrane insertion of the pore-forming domain of colicin A. A spectroscopic study.

In order to gain some insight into the mechanism of insertion into membranes of the pore-forming domain of colicin A and the structure of its membrane-bound form, circular dichroism (in the near and far ultraviolet), fluorescence and ultraviolet spectroscopy experiments were carried out. Because the structure of the water-soluble form of this fragment has been determined by X-ray crystallography, these spectroscopic methods provided valuable information on the secondary structure and the environment of aromatic residues within the two forms of the peptide. These results strongly suggest that the pore-forming domain of colicin A does not undergo drastic unfolding upon insertion into membrane. The conformational change associated with this process is triggered by the negatively charged lipids and probably consists of a reorientation of helix pairs with respect to each other. Exposure of the aromatic residues to the aqueous phase decreases on binding to lipids whilst the exposure of the tryptophans to the membrane phase increases. This cannot occur without a reorientation of helices 3-10. All data from this study support the model presented previously in which the known crystal structure opens like an 'umbrella' inserting the hydrophobic hairpin (helix 8-9) perpendicular to the membrane plane and the helical pair 1-2 and the domain containing the three tryptophans (helices 3-7) lying more or less parallel to the membrane plane. Lipids are bound more tightly to the protein at acidic pH than at neutral pH although a similar lipid protein complex is formed with 1,2-dimyristoyl-sn-glycero(3)-phospho(1)- -sn-glycerol at both pH values.

Circular Dichroism↗

PubMed1991

Individual domains of colicins confer specificity in colicin uptake, in pore-properties and in immunity requirement.

Six different hybrid colicins were constructed by recombining various domains of the two pore-forming colicins A and E1. These hybrid colicins were purified and their properties were studied. All of them were active against sensitive cells, although to varying degrees. From the results, one can conclude that: (1) the binding site of OmpF is located in the N-terminal domain of colicin A; (2) the OmpF, TolB and TolR dependence for translocation is also located in this domain; (3) the TolC dependence for colicin E1 is located in the N-terminal domain of colicin E1; (4) the 183 N-terminal amino acid residues of colicin E1 are sufficient to promote E1AA uptake and thus probably colicin E1 uptake; (5) there is an interaction between the central domain and C-terminal domain of colicin A; (6) the individual functioning of different domains in various hybrids suggests that domain interactions can be reconstituted in hybrids that are fully active, whereas in others that are much less active, non-proper domain interactions may interfere with translocation; (7) there is a specific recognition of the C-terminal domains of colicin A and colicin E1 by their respective immunity proteins.

Bacterial Outer Membrane Proteins↗

PubMed1991

ompC mutants which allow growth on maltodextrins show increased channel size and greater voltage sensitivity.

Misra and Benson [(1988) J. Bacteriol. 170, 3611-3617] showed that point mutations in the ompC gene can allow Escherichia coli to grow on maltotriose in the absence of LamB. This report shows that these mutants produce OmpC porins with increased single channel conductance compared to the wild type. The mutants showed similar voltage dependence to each other and to PhoE by being totally closed at 200 mV. The wild type from various sources was largely insensitive to voltages below 200 mV and thus 6 point mutations at 3 sites appear to increase the voltage dependence of OmpC channels.

Amino Acid Sequence↗

PubMed1991

Site-directed mutagenesis at histidines of aerolysin from Aeromonas hydrophila: a lipid planar bilayer study.

The role of histidine residues in the formation of channels by the cytolytic toxin aerolysin has been studied in planar lipid bilayers by substituting each of the six histidines in the native protein with asparagine. His341 or His186 mutants had the same channel-forming ability as native toxin, whereas the His332 and His121 mutants were less active. Mutations at His132 and His107, which interfere with the oligomerization of the toxin, drastically reduce pore formation. These findings support the conclusion that oligomerization of the toxin must precede channel formation, and that at least two of the six histidine residues are essential for this to occur. The aerolysin channel is a water-filled pore with an approximate diameter of 9.3 +/- 0.4 A.

Aeromonas hydrophila↗

PubMed1991

The bacterial porin superfamily: sequence alignment and structure prediction.

The porins of Gram-negative bacteria are responsible for the 'molecular sieve' properties of the outer membrane. They form large water-filled channels which allow the diffusion of hydrophilic molecules into the periplasmic space. Owing to the strong hydrophilicity of their amino acid sequence and the nature of their secondary structure (beta strands), conventional hydropathy methods for predicting membrane topology are useless for this class of protein. The large number of available porin amino acid sequences was exploited to improve the accuracy of the prediction in combination with tools detecting amphipathicity of secondary structure. Using the constraints of beta-sheet structure these porins are predicted to contain 16 membrane-spanning strands, 14 of which are common to the two (enteric and the neisserial) porin subfamilies.

Amino Acid Sequence↗

PubMed1990

A 136-amino-acid-residue COOH-terminal fragment of colicin A is endowed with ionophoric activity.

DNA regions encoding the various domains of a protein can be expressed as separate entities by inserting at appropriate sites a 'STOP-Shine-Dalgarno-sequence-ATG' cassette encoding a termination codon, a Shine-Dalgano sequence and an initiation codon within the structural gene. This technique has been used to obtain a 137-amino-acid-residue pore-forming protein designated DA70C comprising the final 136-amino-acid-residue COOH-terminal of colicin A preceded by an NH2-terminal methionine. Da70C was correctly expressed but poorly released to the extracellular medium. Its purification involved, as a final step, a partition in Triton X-114 thus demonstrating that hydrophobic regions are exposed in this protein. The ability of DA70C to form ion channels in planar lipid bilayers was investigated and pore properties were analyzed. The results indicate that helices 1-3 of the 204-amino-acid-residue colicin pore-forming domain (containing 10 alpha-helices) are not involved in ion conduction through the channel. However, they are important in maintaining the stability of the soluble state of the COOH-terminal domain.

Amino Acid Sequence↗

PubMed1990

Colicins: prokaryotic killer-pores.

Colicins are plasmid-encoded protein antibiotics which kill bacteria closely related to the producing strain (generally Escherichia coli). The study of the function of colicins has revealed many features which reflect common targeting and translocation mechanisms with bacteriophages and toxins. Like many toxins, colicins are composed of structural domains specialized in one of the different steps of the activity, targeting, translocation and killing. The major group comprises those colicins which permeabilize the cytoplasmic membrane, thereby destroying the cell's membrane potential. These colicins form well-defined voltage-gated ion channels in artificial membranes. The scope of this review is to describe some of the more recent findings concerning the structure and mode of action of pore-forming colicins with a special attention to models of membrane insertion and pore structure based on the recently determined three-dimensional structure of the pore-forming domain of colicin A.

Amino Acid Sequence↗

PubMed1990

Method for forming two-dimensional paracrystals of biological filaments on lipid monolayers.

A method is described for electron microscopic observation of two-dimensional paracrystals on unsupported lipid monolayers. The method uses a hydrophobic holey C-coated grid placed on a monolayer made positively charged by the inclusion of stearylamine (SA) and has been used to align scallop thin filaments and reconstituted actin/tropomyosin filaments to form paracrystals. The use of unsupported monolayers allows the paracrystals to be viewed in either negative stain or with cryoelectron microscopy. Those paracrystals in frozen hydrated specimens have better order than those with negative stain. It was found that varying the lipid composition between the less fluid distearolyphosphotidylcholine/SA and the more fluid egg yolk phosphotidylcholine/SA alters the size and order of the paracrystals, the more fluid system having smaller, more ordered paracrystalline domains. The advantage of the technique for studying actin/thin filaments is the ability to form large two-dimensional paracrystals under physiological conditions of [Mg2+] and pH.

Crystallization↗

PubMed1990

Aerolysin, a hemolysin from Aeromonas hydrophila, forms voltage-gated channels in planar lipid bilayers.

The cytolytic toxin aerolysin was found to form ion channels which displayed slight anion selectivity in planar lipid bilayers. In voltage-clamp experiments the ion current flowing through the channels was homogeneous indicating a defined conformation and a uniform size. The channels remained open between -70 to +70 mV, but outside this range they underwent voltage-dependent inactivation which was observed as open-closed fluctuations at the single-channel level. Zinc ions not only prevented the formation of channels by inhibiting oligomerization of monomeric aerolysin but they also induced a closure of preformed channels in a voltage-dependent fashion. The results of a Hill plot indicated that 2-3 zinc ions bound to a site within the channel lumen. Proaerolysin, and a mutant of aerolysin in which histidine 132 was replaced by an asparagine, were both unable to oligomerize and neither could form channels. This is evidence that oligomerization is a necessary step in channel formation.

Aeromonas↗