PubMed Health⌕ Search

Biomedical subjects

F R Schmidt

Publications and source records attributed to F R Schmidt.

17 recordsLinked to original sources

Optimization and scale up of industrial fermentation processes.

To increase product yields and to ensure consistent product quality, key issues of industrial fermentations, process optimization and scale up are aimed at maintaining optimum and homogenous reaction conditions minimizing microbial stress exposure and enhancing metabolic accuracy. For each individual product, process and facility, suitable strategies have to be elaborated by a comprehensive and detailed process characterization, identification of the most relevant process parameters influencing product yield and quality and their establishment as scale-up parameters to be kept constant as far as possible. Physical variables, which can only be restrictedly kept constant as single parameters, may be combined with other pertinent parameters to appropriate mathematical groups or dimensionless terms. Process characterization is preferably based on real-time or near real-time data collected by in situ and on-line measurements and may be facilitated by supportive approaches and tools like neural network based chemometric data analysis and modelling, clarification of the mixing and stream conditions through computational fluid dynamics and scale-down simulations. However, as fermentation facilities usually are not strictly designed according to scale-up criteria and the process conditions in the culture vessels thus may differ significantly and since any strategy and model can only insufficiently consider and reflect the highly complex interdependence and mutual interaction of fermentation parameters, successful scale up in most cases is not the result of a conclusive and straight-lined experimental strategy, but rather will be the outcome of a separate process development and optimization on each scale. This article gives an overview on the problems typically coming along with fermentation process optimization and scale up, and presents currently applied scale-up strategies while considering future technologies, with emphasis on Escherichia coli as one of the most commonly fermented organisms.

Bioreactors↗

About the nature of RNA interference.

In the context of yet unclarified issues of RNA interference (RNAi), it is discussed that RNAi-induced histone modification may not only have the purpose of inactivating native genes by blocking their transcription in the sense direction but may also simultaneously trigger transcription of the corresponding antisense strand to form double-stranded RNA for posttranscriptional gene-silencing in cells lacking RNA replicase activities. Invading foreign genetic traits may be posttranscriptionally silenced through complementary transcripts from specific, highly variable genomic regions, which are able to finally match any given sequence by the appropriate recombination and processing of their transcripts. The information to fight these traits may additionally become anchored in the genome, to provide at least a temporary "immunity" and may be inherited at least for a few generations. It is further proposed that: (1) RNA viruses evolved from constituents of the RNAi machinery through the capture of functions essential for their maintenance and replication and (2) viruses and RNAi are mutually interacting components of a universal and predominant genetic steering system that is involved in the modulation of gene expression on the cellular level and simultaneously constitutes a driving force for evolution, particularly in imperfect organisms. Such a model would deliver explanations for yet unresolved issues of RNAi, the clarification of which will have a significant impact on its future medical and biotechnological application.

Animals↗

Recombinant expression systems in the pharmaceutical industry.

In terms of downstream processing efficiency, secretory expression systems offer potential advantages for the production of recombinant proteins, compared with inclusion body forming cytosolic systems. However, for high-volume therapeutics like insulin, the product yields of the majority of the potentially available secretory systems is not yet fully competitive. Current strategies to improve productivity and secretion efficiency comprise: (1) enhancement of gene expression rates, (2) optimization of secretion signal sequences, (3) coexpression of chaperones and foldases, (4) creation of protease deficient mutants to avoid premature product degradation and (5) subsequent breeding and mutagenesis. For the production of non-glycosylated proteins and proteins, which are natively glycosylated but are also pharmacologically active without glycosylation, prokaryotes, which usually lack metabolic pathways for glycosylation, are theoretically the most suitable organisms and offer two alternatives: either Escherichia coli strains are conditioned to be efficient secreters or efficient native secreters like Bacillus species are accordingly developed. To fully exploit the secretory capacity of fungal species, a deeper understanding of their posttranslational modification physiology will be necessary to steer the degree and pattern of glycosylation, which influences both folding and secretion efficiency. Insect and mammalian cells display posttranslational modification patterns very similar or identical to humans, but in view of the entailed expenditures, their employment can only be justified if their modification machinery is required to ensure a desired pharmacological activity.

Animals↗

The challenge of multidrug resistance: actual strategies in the development of novel antibacterials.

Bacterial resistance against established antibiotics is becoming an increasingly important global healthcare problem. Despite enormous efforts, the number of therapeutically useful compounds that emerge from chemical derivatisation programs, which aim at circumventing mechanisms of resistance, is continuously decreasing and no truly novel class of compound has been introduced into therapy for nearly four decades. Hopes are now set on a thorough elucidation of bacterial cell functions to identify new bacterial target sites, and on the development of novel compounds with alternative modes of action. The pursuit of these strategies is rendered possible by employment of biotechnologically based methods such as in vivo modification of biosynthetic routes in antibiotic-producing organisms, large-scale screening assays with isolated bacterial targets, the molecular profiling of bacterial genomes and proteomes, and the development and clinical use of biochips as diagnostic tools for rapid identification and characterization of pathogenic strains. As one of the most promising class of compounds known to date with unique modes of action that escape most known mechanisms of resistance, peptic agents have recently came under the focus of anti-infective research, just as extracellular signalling molecules (autoinducer) have emerged as new bacterial target sites.

Anti-Bacterial Agents↗

Cephaibols, new peptaibol antibiotics with anthelmintic properties from Acremonium tubakii DSM 12774.

Two groups of new peptaibol-type antibiotics termed cephaibols have been isolated from the fungus Acremonium tubakii, DSM 12774. These 16- or 17-unit straight-chain peptides, whose structures were characterized by amino acid analyses, 2-D NMR experiments, and by mass spectrometric sequencing, have a high content of the unusual amino acids aminoisobutyric acid and isovaline. The principal constituent of the novel peptaibol mixture is cephaibol A, which is formed in abundance in cultures of the wild strain. The striking biological property of cephaibol A is its pronounced anthelmintic action and activity against ectoparasites.

Acremonium↗

Characteristics and DNA-sequence of a cryptic haloalkanoic acid dehalogenase from Agrobacterium tumefaciens RS5.

Agrobacterium tumefaciens RS5 harbors two different hydrolytic haloalkanoic acid dehalogenase genes, one coding for a nonstereospecific enzyme (DhlS5II) and a second for a cryptic L-isomer-specific dehalogenase (DhlS5I). The latter gene was cloned and expressed in Escherichia coli. Biochemical characterization and sequence analysis of dhlS5I shows its membership to the class of the L-isomer-specific hydrolytic dehalogenases. Highest homology of 72% was found to the dehalogenase LdexYL from Pseudomonas sp. YL. Both enzymes share an unusual high temperature optimum of 65 degrees C. Controlled by a vector promoter, high specific dehalogenase activities up to 32 U mg-1 protein were obtained in E. coli, and putatively, owing to its own sigma70-dependent promoter, a constitutive low-level expression of dhlS5I of 0.4 U mg-1 protein was measured.

Agrobacterium tumefaciens↗

Monitoring survival and gene transfer in soil microcosms of recombinant Escherichia coli designed to represent an industrial production strain.

A genetically engineered microorganism (GEM) was designed to exemplify bacterial strains used for the production of biological material in industry. The recombinant DNA was located on a safety plasmid (pUC19). Survival and persistence of the GEM and its recombinant DNA (rDNA) was determined in soil microcosms by using different monitoring methods, including the polymerase-chain reaction, to amplify and detect the specific rDNA. Depending on nutritional status, both the GEM and its rDNA had disappeared within 16 (amended soil) or 28 days (non-amended soil) with a limit of detection of 5 cells/g soil and 20 fg DNA/g soil.

Base Sequence↗

Site-specific integration of genes into hot spots for recombination flanking aadA in Tn21 transposons.

Tn21-related transposons are widespread among bacteria and carry various resistance determinants at preferential sites, hs1 and hs2. In an in vivo integrative recombination assay it was demonstrated that these hot spots direct the integration of aminoglycoside resistance genes like aadB from Klebsiella pneumoniae and aacAI from Serratia marcescens, in a recA- background. The maximum required recognition sequence which must be present in both the donor and recipient plasmids is 5' CTAAAACAAAGTTA 3' (hs2). The double-site-specific recombination occurred with a frequency of 10(-5)-10(-6). The resulting structures include not only replicon fusion products but also more complex structures carrying two copies of the donor plasmid or simply the donor gene flanked by hs elements. hs1 and hs2 are thought to act as recognition sites for a transacting site-specific recombinase. By the use of Tn21 deletion derivatives, it has been shown that the recombinase is not encoded by Tn21. This new integrative recombination system is involved in the acquisition of new genes by Tn21-related transposons and their spread among bacterial populations.

Base Sequence↗

Nucleotide-sequence of insertion element IS15 delta IV from plasmid pBP11.

The nucleotide sequence of an insertion element in R-factor R1767 derivative pBP11 was determined. It is almost overall identical with IS15 delta, IS26 and IS46. Like IS46 it flanks one end of the sul-bla determinant and is involved in amplification of the resistance cassette. The significance for this process of a palindrome comprising part of IS15 delta IV is discussed.

Base Sequence↗

Nucleotide sequence of an OXA-2 beta-lactamase gene from the R-plasmid R1767 derived plasmid pBP11 and comparison to closely related resistance determinants found in R46 and Tn2603.

Plasmid pBP11 contains a sequence homologous to Tn21-like element Tn2410 encoding dihydropteroate synthetase and beta-lactamase OXA-2. The nucleotide sequence of a 1.5 kb segment of this region has been determined including the bla gene. It reveals strong sequence homology with the OXA-2 operon of plasmid R46. The implications of an additional 319 bp segment in pBP11 for the different evolution of R46/pKM101 and pBP11 are discussed.

Base Sequence↗

Structure and function of hot spots providing signals for site-directed specific recombination and gene expression in Tn21 transposons.

Tn21- and Tn3-related transposons are widespread and carry various resistance determinants. The insertion points of different resistance genes were precisely defined in Tn2424, Tn1696, Tn2410, Tn4000 and its derivatives and compared to the corresponding sites in Tn7, pSA, R388, R46, Tn2603, Tn1331 and in Tn3-related elements. Insertional 'hot spots' located at the 3' end of different genes comprised 55 nucleotides and yielded more than 90% homology to the corresponding consensus sequence, termed hs1. Elements of this class were found to direct recA-independent generation of deletions. Flanking the 5' ends, hs2 (CTAAAACAAAGTTA) comprised the terminal nucleotides of hs1. Functional properties of hot spots as recognition sites for site-specific recombination and regulation of gene expression indicate that they might be involved in transfer, stable inheritance and expression of prokaryotic genes.

Base Sequence↗

Nucleotide sequence analysis of 2''-aminoglycoside nucleotidyl-transferase ANT(2'') from Tn4000: its relationship with AAD(3'') and impact on Tn21 evolution.

Aminoglycoside 2''-O-nucleotidyltransferase (AAD(2'')) mediates bacterial resistance to dibekacin, gentamicin, kanamycin, sisomicin and tobramycin. Its coding sequence, aadB, is part of Tn21-related transposon, Tn4000. Nucleotide sequence analysis revealed the presence of an open reading frame capable of specifying a protein of 177 amino acids with a calculated molecular weight of 21,240. The predicted amino acid sequence revealed up to 27% homology to that of three nucleotidyltransferases of type AAD(3''), which are widely distributed among Gram-negatives, and to the AAD(9) from Staphylococcus aureus transposon Tn554. The regions flanking aadB suggest that its insertion into Tn21 arose from a site-specific recombination event adjacent to the aadA gene.

Amino Acid Sequence↗

Cloning and nucleotide sequence of a D,L-haloalkanoic acid dehalogenase encoding gene from Alcaligenes xylosoxidans ssp. denitrificans ABIV.

We have cloned DNA fragments of plasmid pFL40 from Alcaligenes xylosoxidans ssp. denitrificans ABIV encoding a D,L-2-haloalkanoic acid halidohydrolase (DhlIV). A 6.5-kb EcoRI/SalI-fragment with inducible expression of the halidohydrolase was cloned in Pseudomonas fluorescens and Escherichia coli. A 1.9-kb HindII-fragment demonstrated expression of the dehalogenase only due to the presence of the promoter from the pUC vector in Escherichia coli. The nucleotide sequence of this DNA-fragment was determined. It had an open reading frame coding for 296 amino acid residues (molecular weight of 32783 D). The dhlIV gene showed sequence homology to a short segment of a D-specific dehalogenase (hadD) from Pseudomonas putida AJ1, but not to any other known DNA sequences. Restriction enzyme patterns indicated similarity between dhlIV and the D,L- isomer specific dehl dehalogenase gene from Pseudomonas putida PP3. There are some indications from restriction enzyme patterns and initial sequencing data, that a gene encoding a sigma 54-dependent activator protein, similar to the dehRI regulatory gene from Pseudomonas putida PP3 is located upstream of dhlIV. In contrast to DehI, dehalogenation of D- or L-chloropropionic acid by the DhlIV-protein leads to lactic acid of inverted configuration.

Alcaligenes↗