Biomedical subjects

F Rouais

Publications and source records attributed to F Rouais.

At least 19 recordsLinked to original sources

PubMed2006

Effect of laser modified surface microtopochemistry on endothelial cell growth.

The introduction of microelectronics technology in the area of biological sciences has brought forth previously unforeseeable applications such as DNA or protein biochips, miniaturized, multiparametric biosensors for high performance multianalyte assays, DNA sequencing, biocomputers, and substrates for controlled cell growth (i.e. tissue engineering). We developed and investigated a new method using "cold" excimer laser beam technology combined with microlithographical techniques to create surfaces with well defined 3D microdomains in order to delineate critical microscopic surface features governing cell-material interactions. Microfabricated surfaces with microgrooves 30-3 microm deep, 10 - 1 microm wide spaced 30 microm apart were obtained with micron resolution, by "microsculpturing" polymer model surfaces using a computer controlled laser KrF excimer beam coupled with a microlithographic projection technique. The laser beam after exiting a mask was focused onto the polymer target surface via an optical setup allowing for a 10-fold reduction of the mask pattern. Various 3D micropatterned features were obtained at the micron level. Reproducible submicron features could also be obtained using this method. Subsequently, model human umbilical endothelial cells (HUVEC) were cultured on the laser microfabricated surfaces in order to study the effects of specific microscopic surface features on cell deposition and orientation. Cell deposition patterns were found to be microstructure dependant, and showed cell orientation dependency for features in the cell range dimension, a behaviour significantly different from that of a previously studied cell model (osteoprogenitor cell). This model may be a promising in so far as it is very rapid (a time frame less than a second per square centimeter of micropatterned surface) and provides further insights into the effects of surface microtopography on cell response with possible applications in the field of biosensors, biomedical and/or pharmaceutical engineering sciences.

Cell Culture Techniques↗

PubMed2005

Mineralization of regenerated cellulose hydrogels induced by human bone marrow stromal cells.

The proliferation of cultured human bone marrow stromal cells (HBMSC) on regenerated cellulose hydrogels was assessed. Regenerated cellulose hydrogels showed good rates of HBMSC proliferation, the cells exhibiting a flattened morphology, and after 22 days in culture, the cells had homogeneously colonized the surface of the materials. Moreover, since the early days in culture, between the surface of the materials and attached cells a continuous granulated hydroxyapatite layer was formed. It has been previously demonstrated in vitro, but without cells, that these materials did not mineralize. Hence, it seems that HBMSC promoted the mineralization of the surface.

Bone Marrow Cells↗

PubMed2002

Cytocompatibility study of organic matrix extracted from Caribbean coral porites astroides.

Since 1980, natural coral exoskeleton has been widely used as bone graft substitute. Despite numerous in vitro and in vivo studies. there is still a lack of knowledge concerning the organic matrix associated with coral exoskeleton (COM). In fact, some surgical interventions have failed and this has sometimes been attributed to the exoskeleton organic matrix. For others, only amino acids are present in the matrix after coral preparation for clinical use. The objective of this study was to extract the exoskeleton organic matrix to carry out biochemical analysis and study its specific cytocompatibility. Demineralized bone powder (DBP) was used as control. A decalcification process was used to extract COM and DBP. Protein, carbohydrate and glycosaminoglycan analysis was carried out in DBP and COM using classical staining methods. Human bone marrow cells were cultured in the presence of 20, 40, 80, 160 microg of COM or DBP for 24, 48 and 72 h. The methods used to analyze COM and DBP effects were scanning electron microscopy immunocytochemistry, manual cell count, and cyto-compatibility assay (Neutral red and MTT tests). Results showed that in spite of treating coral before clinical use, a COM was present in which GAG, protein and carbohydrate were found. The in vitro cytocompatibility of COM was confirmed for 20 and 40 microg values but was less pronounced for 80 and 160 microg levels.

Alkaline Phosphatase↗

PubMed2002

Laser microfabricated model surfaces for controlled cell growth.

The relatively recent applications of microelectronics technology into the biological sciences arena has drastically revolutionized the field. New foreseeable applications include miniaturized, multiparametric biosensors for high performance multianalyte assays or DNA sequencing, biocomputers, and substrates for controlled cell growth (i.e. tissue engineering). The objectives of this work were to investigate a new method combining microphotolithographical techniques with laser excimer beam technology to create surfaces with well defined 3-D microdomains in order to delineate critical microscopic surface features governing material-cell interaction. Another obvious application of this study pertains to the fabrication of cell-based biosensors. Microfabricated surfaces were obtained with micron resolution, by "microsculpturing" polymer model surfaces using a laser excimer KrF beam coupled with a microlithographic projection technique. The laser beam after exiting a mask was focused onto the polymer target surface via an optical setup allowing for a 10-fold reduction of the mask pattern. Various 3-D micropatterned features were obtained at the micron level. Reproducible submicron features could also be obtained using this method. Subsequently, model osteoblast-like cells were plated onto the laser microfabricated surfaces in order to study the effects of particular surface microtopography on preferential cell deposition and orientation. Preferential cell deposition was observed on surfaces presenting "smooth" microtopographical transitions. This system may provide an interesting model for further insights into correlations between 3-D surface microtopography and cell response with new applications in the field biosensor, biomaterial and pharmaceutical engineering sciences (e.g. new cell based biosensors, controlled synthesis of immobilized cell derived active ingredients).

Biocompatible Materials↗

PubMed1998

First use of cultured human urothelial cells for biocompatibility assessment: application to urinary catheters.

For several years, studies performed to estimate in vitro biocompatibility of urinary catheters have been carried out using permanent cell lines. But for a rational design of the testing procedure, the cell culture model should relate to the material application. This work presents the results of a probe study designed to obtain an in vitro model of normal human urothelial cells (HUC) and to test the relevance of this system in cytocompatibility experiments of urinary catheters currently used.A comparison is made with continuous cell lines, the use of which is recommended by normalization bodies. We exposed monolayers of HUC (well characterized for their proliferation, qualitative evaluation, and quantitative measurement of cytokeratins) and two continuous human cell lines to liquid extracts (either pure or diluted in the culture medium) of nine available catheters, including positive (latex) and negative controls, for a 24 h incubation. Then colorimetric assays (Neutral Red and MTT) were performed. The extracts of two polyurethanes provoked a significant toxic effect on HUC only, suggesting differences in sensitivity between the models used. This effect could be due to the presence of a great amount of barium (used as a radioopacifier) in extracts, as highlighted by results of absorption emission spectroscopy. A culture model of HUC may be of relevance for the screening of materials intended for urological practice.

Biocompatible Materials↗

PubMed1998

Endothelial cells lining polyester fabric express pro-coagulant phenotype in vitro.

The paper deals with the in vitro assessment of endothelial cell (EC) phenotype covering an albumin- and chitosan-coated polyester fabric and shows that resting ECs express a pro-coagulant phenotype by releasing a high von Willebrand factor level and expressing low thrombomodulin surface activity, despite maintaining an adequate response to stimulating agents.

Biocompatible Materials↗

PubMed1998

Cellular biocompatibility and resistance to compression of macroporous beta-tricalcium phosphate ceramics.

The main problem for macroporous structures used as bone substitutes is their lower resistances when compared to that of cancellous bone. The present investigation aimed to improve the strength of ceramics with 65% porosities based on beta-TCP. The initial mixtures were rendered plastic by addition of non-ionic carbohydrate binders. Macropores were created using substances which were eliminated by heat. Mechanical tests indicated that the resistance of the ceramics depended more on the quantity than the nature of the binders. Porosity measurements were done with a mercury porosimeter, and cellular biocompatibility was evaluated by performing cellular attachment tests and observing the proliferation of differentiated cells.

Biocompatible Materials↗

PubMed1998

"In vitro" dissolution of coral in peritoneal or fibroblast cell cultures.

Previous studies have shown that in vivo coral resorption involves a biphasic process: First, the edges of the coral block become powdery, then extracellular fluid and phagocytosis contribute to the dissolution of the crystals. The authors examined some types of cells that could be involved in phagocytosis, particularly the ability of both dermal fibroblasts and mouse-resident peritoneal cells to phagocytose and dissolve coral powder "in vitro". Radioactive coral was incubated for 24, 48, or 72 hrs with cells in the presence or absence of cytochalasin B (a phagocytic inhibitor) or chloroquine (a lysosomotropic agent). Furthermore, to specify the role of crystal cell contacts in the solubilization process, they incubated radioactive coral in conditioned media (obtained from two-day human fibroblastic or macrophagic cell culture in the presence or absence of non-radioactive coral) or at a distance from the cells using culture inserts. Measurements of the radioactivity in the different supernatants were performed. Transmission electron microscopy was carried out on the cells cultivated in the presence or absence of radioactive coral. The data suggest that both fibroblasts and macrophages dissolve the coral, and that the intracellular degradation in phagolysosomes is one of the mechanisms explaining coral powder dissolution.

Animals↗

PubMed1997

Physico-chemistry and cytotoxicity of ceramics: part I: characterization of ceramic powders.

The morphology of Al2O3, ZrO2/Y2O3, AIN, B4C, BN, SiC, Si3N4, TiB2, TiC, TiN ceramic, graphite and diamond powders has been studied by scanning electron microscopy (SEM) and the specific area of each powder was determined with the BET method. X-ray diffraction (XRD) investigations have been carried out in order to evaluate the crystallinity and determine the constitutive phases. The chemical composition was assessed by classical chemical analyses and by X-ray microprobe; some powders were studied by the laser micro-Raman technique. Correlations have been established between all these results.

Journal Article↗

PubMed1997

Ex vivo expansion of haematopoietic progenitors on an endothelialized hydroxyapatite matrix.

Autologous haematopoietic progenitor cell (HPC) transplantation is increasingly used to restore haematopoiesis after high-dose chemotherapy treatments. The present study was designed to analyse the ability of hydroxyapatite (HAP) seeded with endothelial cells (EC) to support the proliferation and differentiation of CD34+ HPC in static culture conditions. HAP is endothelializable as assessed by scanning electron microscopy and time-course DNA synthesis analysis using tritiated thymidine incorporated in EC isolated from human umbilical vein cord. Short-term coculture experiments in which CD34+ cells isolated from human cord blood were seeded on endothelialized HAP, were performed. Results show that endothelialized HAP is permissive to CD34+ cell expansion with a maximum expansion obtained between days 7 and 14 of coculture in the presence of IL-1 and IL-3 when compared with other experiments omitting either EC or interleukins. From morphological analyses, the expanded cell population mainly belonged to the myelocytic lineage with 33% mature cells (polymorphonuclear neutrophils and monocytes) at day 14 of coculture. The immature HPC could remain trapped within HAP while giving rise to a more mature progeny that exit from HAP microenvironment.

Journal Article↗

PubMed1997

Cora rotary pump for implantable left ventricular assist device: biomaterial aspects.

Our group is developing a left ventricular assist device based on the principle of the Maillard-Wankel rotative compressor: it is a rotary, not centrifugal, pump that produces a pulsatile flow. Stringent requirements have been defined for construction materials. They must be light, yet sufficiently hard and rigid, and able to be machined with high precision. The friction coefficient must be low and the wear resistance high. The materials must be chemically inert and not deformable. Also, the materials must be biocompatible, and the blood contacting surface must be hemocompatible. We assessed the materials in terms of physiochemistry, mechanics, and tribology to select the best for hemocompatibility (determined by studies of protein adsorption; platelet, leukocyte, and red cell retention; and hemolysis, among other measurements) and biocompatibility (determined by measurement of complement activation and toxicity, among other criteria). Of the materials tested, for short- and middle-term assistance, we chose titanium alloy (Ti6Al4V) and alumina ceramic (Al2O3) and for long-term and permanent use, composite materials (TiN coating on graphite). We saw that the polishing process of the substrate must be improved. For the future, the best coating material would be diamond-like carbon (DLC) or crystalline diamond coating.

Adsorption↗

PubMed1996

A two-step embedding process for better preservation of soft tissue surrounding coral implants.

Infiltration of paraffin or embedding polymers proceeds more quickly in soft than in mineralized tissue specimens (bone or biomaterial). The proposed method takes advantage of this difference to protect soft tissue from the action of decalcifying agents. After embedding a bone-soft-tissue sample in a hydrophobic polymer, it is cleared of the resin on one of its sides to permit access of the decalcifying solution to the mineral component. A second infiltration with another polymerizable solution that cures in the empty pores created by the dissolution makes it possible to obtain a homogeneous hard block, make thin slices, and perform enzyme histochemistry and immunostaining on well-preserved soft tissue with most of its antigenic and enzymatic properties intact.

Animals↗

PubMed1996

Ability of various inserts to promote endothelium cell culture for the establishment of coculture models.

To select an insert suitable for human umbilical vein endothelial cell (HUVEC) culture, we compared several available inserts of 0.2 to 0.45 micron porosity: Cellagen (ICN), Transwell-COL (Costar), Millicell-HA and CM (Millipore), Anopore (Nunc), Cyclopore (Falcon) in comparison with a control surface (Thermanox). The requirements were: (i) to promote attachment, adhesion and proliferation of HUVEC (judged by [3H]thymidine incorporation into DNA at days 1, 3, 7); (ii) to allow HUVEC visualization by inverted, fluorescence microscopy for uptake of DiI-Ac-LDL and scanning electron microscopy, performed at day 9 after seeding. Because Transwell and Cellagen are collagen precoated and CM has to be coated for cell culture, we performed collagen coating (types I + III or IV) for non-pretreated inserts for the purpose of comparison. Our preferences comprise Transwell-COL, Cyclopore not coated or coated (whatever the collagen type), and Cellagen. However, on a quality/price ratio criterion, Cyclopore, even uncoated, is the insert of choice. The HA, CM and Anopore inserts, even coated, do not allow HUVEC growth but do not alter positive uptake of acetylated LDL.

Cells, Cultured↗

PubMed1996

Influence of the structure of three corals on their resorption kinetics.

The aim of this study was to investigate the influence of the structure of corals on their resorption kinetics after implantation in subcutaneous areas. Three types of coral (Porites astreoides, Montastrea annularis and Dichocoenia stokesi) identical in composition but different in structure were implanted for periods of 1 and 2 months in subcutaneous sites in OF1 mice. The resorption of the implants was studied by means of qualitative (histology, scanning electron microscopy, fluorochrome labelling method) and quantitative approaches (gravimetric method). The results of the qualitative study revealed a process of irregular deterioration of the coral, linked to the detachment of crystals at the surface of the implant. The results of the quantitative study showed that the speed of resorption increases with the implantation time and the open porosity of the coral. These reactions are explained by the increase of the surface exchange area in contact with factors responsible for resorption: biological medium and cells. When considering the choice of coral as a bone substitute, these factors must be taken into account to allow the in situ maintenance of the implant over a sufficiently long period of time according to the clinical situation.

Animals↗

PubMed1995

The resorption of bone-implanted corals varies with porosity but also with the host reaction.

Three different exoskeletons of coral species Porites asteroides (P), Montastrea annularis (M), and Dichocoenia stokesi (D) were implanted for 2-20 weeks in rabbits. At 2, 4, 8, or 20 weeks, the exoskeletons presented variations in their resorptions depending on the species. To understand the variations in the decreasing speed of the implants despite their similar chemical composition, a study of the surface and architecture of the coral was carried out using scanning electronic microscopy, porosity was evaluated, and growth and differentiation of osteogenic cells cultured in vitro were observed for more than 1 month. At the cellular level, the surface of the implants was identical. Three-dimensional structures of the implants were variable, but the porosity values [P = 42.7%, M = 40.7%, and D = 17.4%] could not completely account for the differences in the resorbing process of the species. Standard histologic studies performed at 2, 4, 8, and 20 weeks after implantation produced the same pattern with P or M, showing aspects of rapid resorption; however, with D there were images resembling those of a foreign-body reaction. It seems that when resorption is not quick enough, a foreign body reaction develops which further slows down the process. This work focuses on the importance of porosity when using coral as bone substitute.

Animals↗

PubMed1994

Evaluation of cell colonization on biomaterials: preventing cell attachment to plastic containers.

In biocompatibility evaluation involving cell culture models, we use samples of biomaterials of different forms and sizes. During cell seeding onto biomaterials of an inadequate size to cover the bottom of the culture wells completely, cells have the opportunity to attach to the plastic. As described in this report with two culture models and two biomaterials, we use an agarose gel sublayer to prevent this phenomenon.

Biocompatible Materials↗

PubMed1994

A canine ex vivo shunt for isotopic hemocompatibility evaluation of a NHLBI DTB primary reference material and of a IUPAC reference material.

Factors determining the thrombogenic response to particular artificial surfaces were investigated ex vivo in a canine shunt model. Methods using radioisotopic tracers made it possible to dynamically monitor the deposition of labelled blood cells and proteins on a NHLBI.DTB primary reference material polydimethylsiloxane (PRM.PDMS) and on a IUPAC reference material polyvinyl chloride (IUPAC.PVC). On the one hand, leukocyte affinity tau s(leu) (number of deposited leukocytes mm-2s-1) was not significantly different between IUPAC.PVC (tau s(leu) = 1.2-2.5) and PRM.PDMS (tau s(leu) = 1.5-3.4) and the fibrinogen adsorption rate varied from 33 to 48.10(-5) micrograms mm-2s-1 for both these materials. On the other hand, platelet affinity tau s(plat) (number of deposited platelets mm-2s-1) was significantly different (p < 0.05) for IUPAC.PVC and PRM.PDMS (tau s(plat)PVC = 683 +/- 200 > tau s(plat)PDMS = 327 +/- 80). Scanning electron micrographs of adherent platelets, red cells and leukocytes after blood contact ex vivo were performed after each experiment. This preliminary work contributes not only to quantify the adsorption of different radiotracers, but also to evaluate the superficial distribution of the labelled biological species on the inner surface of the tested biomaterials.

Animals↗

PubMed1994

Osteogenin (bone morphogenic protein 3) inhibits proliferation and stimulates differentiation of osteoprogenitors in human bone marrow.

Treatment of human bone marrow osteoprogenitors with osteogenin (BMP-3; at 1, 2.5 and 10 ng/ml) caused dose- and time-dependent inhibition of DNA synthesis and cell proliferation. Simultaneously, osteogenin stimulated type I collagen synthesis and cAMP production. Addition of osteogenin to the cell culture increased intracellular alkaline phosphatase activity and osteocalcin synthesis, with maximal stimulation at 2.5 ng/ml. Simultaneous addition of 2.5 ng/ml osteogenin and 1,25 dihydroxy vitamin D3 (10(-8) M) enhanced the stimulation observed in osteocalcin synthesis. The experiments reported here demonstrate the significant "in vitro" influence of osteogenin in the stimulation of osteogenic phenotype in osteoprogenitor cells which have been isolated from human bone marrow and cloned. These results support a reciprocal relationship between cell growth inhibition and expression of osteoblast differentiation.

Adult↗