PubMed Health⌕ Search

Biomedical subjects

F Schmidli

Publications and source records attributed to F Schmidli.

At least 19 recordsLinked to original sources

[The influence of different polishing systems on dental veneering materials].

Experimental studies were conducted to investigate the efficacy of seven polishing systems (Dia Finish, Kohinoor, Dia Glace, Kenda, Shofu, UNOR, Opal) when used on seven ceramic materials (Empress, Vitadur Alpha, Celay, Cerec, Vita Titanium Porcelain, TiBond, Duceratin), in some cases also on resins (Visiogem, Spectrasit, composite, resin teeth), and on natural enamel. The surface quality of 100 specimens was examined with an optical profilometer and a scanning electron microscope and subsequently evaluated. Polishing the ceramic materials with Kohinoor or Dia Finish resulted in a very high surface polish.. Of the resins, Spectrasit yielded a very high polish when Dia Finish, Dia Glace or Opal were used. Using the tested polishing systems, surface polish results can be obtained intraorally on ceramic restorations that are at least equivalent to glaze-fired ceramic surfaces, if not better. This means that an additional glaze firing is no longer required when ceramic restorations have been modified by grinding. The Dia Finish, Dia Glace, and Kohinoor polishing systems are particularly recommended for finishing and polishing cemented ceramic or resin inlays. The results are similarly favorable when polishing the natural dental enamel, so an excellent homogenous transition from enamel to dual cement and ceramic restoration can be achieved during the final polishing step for cemented restorations.

Ceramics↗

[The modification of the metal ceramic bond by blended gold coating].

The esthetic appearance of porcelain-fused-to-metal restorations is often compromised in areas in which the ceramic veneer has to be kept very thin. In order to overcome this esthetic problem, bonding gold products are offered by dental manufactures which act as an alloy seal, thereby improving the natural color appearance of the ceramic veneer. In addition, the bond strength between ceramic materials and alloys is said to be maintained or in some cases even increased. The present study investigated the effect of various types of bonding gold layers on strength of the bond between ceramic materials and numerous dental alloys as a function of the type of alloy used, using thermocycling over a period of two months with a total of 85,000 temperature changes. The analysis of the results obtained shows that, contrary to manufacturers' claims, only two of the eight bonding gold products can be recommended, and only for three of the twelve alloys tested, as far as the alleged added adhesion is concerned. Only very few combinations of alloys and bonding gold products did not adversely affect adhesion at all or only insignificantly.

Crowns↗

[The effect of the aeration status on the corrosion behavior of Ni-Cr alloys].

Using in vitro tests, the influence of aeration cells that develop in narrow crevices of dental restorations, on the corrosion behaviour of two Ni-Cr alloys (Wiron 88 and Rexillium III) was investigated. The results revealed a 1.6-fold higher ion release in the deaerated part of the electrolyte compared with the aerated one, whereas the ion release was 18-fold higher with Rexillium III. The total analyzed substance loss was 11.1 (S.D. 5.7) and 181.9 (S.D. 48.0) micrograms/cm2, respectively.

Air↗

[Mercury vapors from premeasured amalgam capsules].

12 dental amalgam capsules were tested for mercury leakage during trituration, storage, and disposal. The pertinent measurements were taken using two different measuring systems, both of which were based on the principle of optical absorption. While the results were excellent for half of the encapsulated products, some were deficient with respect to impermeability or safe handling. Five products cannot be recommended for regular use in the dental office. Overall, dental amalgam capsules of the latest product generations release lower mercury vapors; however, there are always exceptions, which is why periodical checks are recommended to protect the dentist and his or her team from avoidable exposure to mercury vapors.

Capsules↗

[New procedures for resin-metal bonds. A comparative in-vitro study].

Since 1984 it has been possible to create a chemical bond between dental alloys and composite resins resembling the metallo-ceramic bond. Modern systems based on silanization (Rocatec, Silicoater MD, and Spectralink), in connection with the specific resins used in these systems (VisioGem, Dentacolor, and SR-Isosit-N), were tested for their bond strength to 9 common dental alloys (of 7 different types) with regard to shear strength, the topography of the fracture surfaces, and metallographic microstructure transformations. No major structural transformations were observed for any of the systems tested. A notable degree of interdependence was seen in the Silicoater MD system whose bond strength to non-precious alloys (among others) was the lowest in the test. The Rocatec system, on the other hand, showed a superior bond to all types of alloys, especially to pure titanium.

Composite Resins↗

[On the clinical relevance of the dimensional behavior of silver amalgam. A comparative in vitro and in vivo study].

The clinical relevance of the dimensional behavior of six different gamma-2-free silver amalgam products was examined in comparative in vitro and in vivo trials. Dye penetration tests, roughness measurements, and inspection of the marginal fit using a scanner electron microscope all showed that the results of the in vivo and the in vitro trials were in good agreement and that there was no significant difference between the various products tested, despite the fact that they differed both in morphology and in composition. Copalite exerts a favorable influence on the marginal fit of amalgam restorations, not only in laboratory trials, but also clinically. The results obtained show that the behavior of an amalgam with respect to changes in volume is not the sole criterion by which its quality is to be judged. Amalgams with a pronounced contraction tendency will seal the marginal gap with their corrosion products (SnCl). Here copalite serves as a temporary stand-in. There was no leakage of metal ions from the restoration into the dentin for any of the products tested, including those with a high copper content.

Adult↗