Biomedical subjects

F W Studier

Publications and source records attributed to F W Studier.

At least 19 recordsLinked to original sources

PubMed1996

Biochemical analysis of mutant T7 primase/helicase proteins defective in DNA binding, nucleotide hydrolysis, and the coupling of hydrolysis with DNA unwinding.

We characterized nine helicase-deficient mutants of bacteriophage T7 helicase-primase protein (4A') prepared by random mutagenesis as reported in the accompanying paper (Rosenberg, A. H., Griffin, K., Washington, M. T., Patel, S. S., and Studier, F. W. (1996) J. Biol. Chem. 271, 26819-26824). Mutants were selected from each of the helicase-conserved motifs for detailed analysis to understand better their function. In agreement with the in vivo results, the mutants were defective in helicase activity but were active in primase function. dTTP hydrolysis, DNA binding, and hexamer formation were examined. Three classes of defective mutants were observed. Group A mutants (E348K, D424N, and S496F), defective in dTTP hydrolysis, lie in motifs 1a, 2, and 4 and are possibly involved in NTP binding/hydrolysis. Group B mutants (R487C and G488D), defective in DNA binding, lie in motif 4 and are responsible directly or indirectly for DNA binding. Group C mutants (G116D, A257T, S345F, and G451E) were not defective in any of the activities except the helicase function. These mutants, scattered throughout the protein, appear defective in coupling dTTPase activity to helicase function. Secondary structural predictions of 4A' and DnaB helicases resemble the known structures of RecA and F1-ATPase enzymes. Alignment shows a striking correlation in the positions of the amino acids that interact with NTP and DNA.

Amino Acid Sequence↗

PubMed1996

Selection, identification, and genetic analysis of random mutants in the cloned primase/helicase gene of bacteriophage T7.

T7 gene 4 specifies two overlapping proteins 4A, a 566-amino acid primase/helicase, and 4B, a 503-amino acid helicase whose initiation codon is the 64th codon of the 4A protein. The 4A' gene, which has a leucine codon replacing the 4B initiation codon, specifies a single 566-amino acid protein that can provide the primase and helicase functions required for normal T7 growth. We selected N-methyl-N'-nitro-N-nitrosoguanidine mutants in the cloned 4A' gene that no longer support the growth of a phage that completely lacks gene 4. Genetic mapping of the 76 mutations found them to be distributed throughout the protein, including both the N-terminal and C-terminal halves of the molecule thought to represent primase and helicase domains, respectively. Complementation tests with partially and completely defective phage showed that all but five of the mutants lacked helicase function but retained primase function. The other five, which lacked both functions, all made short proteins, including one missing only 60 amino acids. No mutations lacked only primase function, and none mapped within the first 105 amino acids, which includes the 63-amino acid region unique to 4A that contains elements required to recognize primase sites. Forty-six mutations were sequenced and included 27 missense mutations affecting 25 amino acids. Many mutations in the N-terminal half of the protein affected its solubility in cell extracts. Mutations in the C-terminal half clustered in or near five helicase consensus sequences. Biochemical analysis of nine of the mutant proteins is described in the accompanying paper (Washington, M. T., Rosenberg, A. H., Griffin, K., Studier, F. W., and Patel, S. S. (1996) J. Biol. Chem. 271, 26825-26834).

Amino Acid Sequence↗

PubMed1996

Assembly of T7 capsids from independently expressed and purified head protein and scaffolding protein.

Prohead-like capsid shells containing the scaffolding and head proteins of bacteriophage T7 were isolated after both proteins were expressed from the cloned genes in the same cell. When the head-tail connector protein was also expressed, the isolated capsids contained neither connector nor scaffolding protein and resembled mature phage capsids rather than proheads. However, only a small fraction of the head protein was converted to stable capsid structures in either case. Purified scaffolding protein (expressed individually from the cloned gene) appeared to be a monomer in solution; purified head protein appeared to be a tetramer. The purified proteins reacted in the presence of polyethylene glycol or dextran to produce prohead-like capsid shells and also polycapsids consisting primarily of head protein, similar to the polycapsids observed after infection by T7 mutants lacking connector or core proteins. Neither capsids nor polycapsids were produced in the absence of scaffolding protein. Polycapsids were usually the predominant product even when scaffolding protein was in excess, and a small fraction of scaffolding protein catalyzed the conversion of an excess of head protein to polycapsids. Our results suggest that the first step in the natural pathway to prohead formation is the assembly of incomplete prohead shells, which are normally closed by insertion of a connector-core complex. In the absence of a functional connector-core complex, incomplete capsid shells apparently react further to form polycapsids or completely closed capsid shells.

Bacteriophage T7↗

PubMed1996

Purification and characterization of T7 head-tail connectors expressed from the cloned gene.

Cloned gene 8, which specifies the protein of the head-tail connector of bacteriophage T7, was expressed in Escherichia coli. Extracts prepared in a low-salt buffer gave rise to free monomers, assembled connectors, and various complexes and aggregates. Connectors isolated as single peaks from DEAE-Sepharose and phosphocellulose chromatography gave separate peaks of monomers and stable connectors upon hydroxylapatite chromatography perhaps because of dissociation of monomer-connector complexes or disassembly of unstable connectors. Electron microscopy showed that the connectors readily formed ordered arrays after hydroxylapatite chromatography but not before. Addition of 100 mM NaCl to the buffer used to prepare extracts eliminated most complexes and aggregates and gave rise almost entirely to monomers and stable connectors that formed arrays even before hydroxylapatite chromatography. The distribution of masses determined by scanning transmission electron microscopy would be consistent with a mixed population of stable connectors containing 12 or 13 monomers, and the same preparation gave two bands upon agarose gel electrophoresis. Connectors bound linear, circular and supercoiled DNA, whereas monomers did not, as determined by a gel-shift assay. No ATPase activity was detected in either monomer or connector preparations in the absence or presence of DNA.

Adenosine Triphosphatases↗

PubMed1996

Polyacrylamide solutions for DNA sequencing by capillary electrophoresis: mesh sizes, separation and dispersion.

Two preparations of linear polyacrylamide with average molecular weights of 0.37 million and 1.14 million Da, and a deuterated preparation with an average molecular weight of 1.71 million Da, were used to study the effects of molecular weight, polydispersity, and concentration on the mesh size of entangled polymers in a DNA sequencing buffer solution and their ability to resolve DNA sequencing reactions by capillary electrophoresis. The polyacrylamide concentrations were above the overlap threshold C*, the concentration above which an entangled polymer network is expected to form. Small angle neutron scattering experiments showed that between 1% and 8% polyacrylamide, the mesh size ( xi ) can be expressed by the relation xi = 2.09C-0.76, where xi is in A and C is the polymer concentration in g/mL. The mesh size depended only on the concentration and was independent of the average molecular weight of the polyacrylamide. Consistent with this result, electrophoretic mobilities of DNA moving through the polymer network depended almost entirely on the polyacrylamide concentration and not on its molecular weight or polydispersity. Although separation was little affected, band sharpness persisted to longer DNAs when the polymer network contained a higher fraction of larger polyacrylamide molecules. We postulate a dispersive effect that depends on the size of the DNA and the resiliency of the polymer network. This interpretation provides a rationale for optimizing the design of polymer solutions to sieve DNA for sequencing by capillary electrophoresis.

Acrylic Resins↗

PubMed1995

Isolation of transcriptionally active mutants of T7 RNA polymerase that do not support phage growth.

Mutants of bacteriophage T7 RNA polymerase defective in functions other than transcription were sought by random chemical mutagenesis of the cloned gene and selection for inability to support the growth of a T7 mutant whose growth is dependent on T7 RNA polymerase supplied by the host cell. About half of the mutant clones appeared unable to make full-length T7 RNA polymerase, many of them producing a truncated protein. Among 116 mutants expressing full-length protein, two-thirds were severely impaired in transcription, but a surprisingly high one-third were able to direct significant transcription in vivo. Both types of mutation were distributed across much of the gene, as determined by a rapid genetic mapping procedure that allows the lethal mutation in each clone to be localized. One mutation (isolated twice) allowed normal gene expression but prevented the formation of mature ends of T7 DNA from concatemers, which normally happens during packaging into phage particles. Thirty-seven of the mutations appeared to increase the sensitivity of the polymerase to inhibition by T7 lysozyme; all were suppressed by mutations in the lysozyme gene, including one suppressor constructed to retain full amidase activity but to be unable to bind T7 RNA polymerase. The two lysozyme-hypersensitive polymerase mutants analyzed in detail showed premature cessation of transcription during infection. Early proteins and those late proteins specified by genes as far right in T7 DNA as genes 8-9 appeared to be produced normally, but expression of genes farther to the right was strongly depressed. DNA replication was depressed about 50% in one of these mutants and 90% in the other, even though the T7 replication proteins were made in normal amounts at the normal time.

Amino Acid Sequence↗

PubMed1995

Ligation of hexamers on hexamer templates to produce primers for cycle sequencing or the polymerase chain reaction.

A method is described for the ordered ligation of hexanucleotides (hexamers) in solution to produce unique longer oligonucleotides. To form an 18-mer, for example, six different hexamers are selected that can base pair unambiguously to form a double-stranded complex of indefinite length. In the most efficient arrangement, each hexamer forms three complementary base pairs with two other hexamers, generating complementary chains of contiguous hexamers with strand breaks staggered by three bases. Two adjacent hexamers in one chain contain 5' phosphate groups and the others are unphosphorylated. Both T4 and T7 DNA ligase can ligate the phosphorylated hexamers to their neighbors in such a complex at hexamer concentrations in the 50-100 microM range, producing an 18-mer and leaving three unphosphorylated hexamers. Twenty-nine of 34 complexes that satisfied the requirements for unambiguous ligation generated the desired 18-mers, which could be used directly for cycle sequencing or, after removal of the unreacted hexamers, for polymerase chain reactions (PCR). Comparable ligation reactions also produced 12-, 24-, and 30-mers. With a library of all 4096 possible hexamers, unambiguous ligation has the potential to produce more than 82% of all possible 18-mers and could readily supply the oligonucleotides needed for DNA sequencing by primer walking, for PCR, or for gene synthesis.

Animals↗

PubMed1995

Consecutive low-usage leucine codons block translation only when near the 5' end of a message in Escherichia coli.

Insertion of nine consecutive low-usage CUA leucine codons after codon 13 of a 313-codon test mRNA strongly inhibited its translation without apparent effect on translation of other mRNAs containing CUA codons. In contrast, nine consecutive high-usage CUG leucine codons at the same position had no apparent effect, and neither low- nor high-usage codons affected translation when inserted after codon 223 or 307. Additional experiments indicated that the strong positional effect of the low-usage codons could not be accounted for by differences in stability of the mRNAs or in stringency of selection of the correct tRNA. The positional effect could be explained if translation complexes are less stable near the beginning of a message: slow translation through low-usage codons early in the message may allow most translation complexes to dissociate before they read through.

Blotting, Northern↗

PubMed1994

The structure of bacteriophage T7 lysozyme, a zinc amidase and an inhibitor of T7 RNA polymerase.

The lysozyme of bacteriophage T7 is a bifunctional protein that cuts amide bonds in the bacterial cell wall and binds to and inhibits transcription by T7 RNA polymerase. The structure of a mutant T7 lysozyme has been determined by x-ray crystallography and refined at 2.2-A resolution. The protein folds into an alpha/beta-sheet structure that has a prominent cleft. A zinc atom is located in the cleft, bound directly to three amino acids and, through a water molecule, to a fourth. Zinc is required for amidase activity but not for inhibition of T7 RNA polymerase. Alignment of the zinc ligands of T7 lysozyme with those of carboxypeptidase A and thermolysin suggests structural similarity among the catalytic sites for the amidase and these zinc proteases. Mutational analysis identified presumed catalytic residues for amidase activity within the cleft and a surface that appears to be the site of binding to T7 RNA polymerase. Binding of T7 RNA polymerase inhibits amidase activity.

Amidohydrolases↗

PubMed1993

Effects of consecutive AGG codons on translation in Escherichia coli, demonstrated with a versatile codon test system.

A system for testing the effects of specific codons on gene expression is described. Tandem test and control genes are contained in a transcription unit for bacteriophage T7 RNA polymerase in a multicopy plasmid, and nearly identical test and control mRNAs are generated from the primary transcript by RNase III cleavages. Their coding sequences, derived from T7 gene 9, are translated efficiently and have few low-usage codons of Escherichia coli. The upstream test gene contains a site for insertion of test codons, and the downstream control gene has a 45-codon deletion that allows test and control mRNAs and proteins to be separated by gel electrophoresis. Codons can be inserted among identical flanking codons after codon 13, 223, or 307 in codon test vectors pCT1, pCT2, and pCT3, respectively, the third site being six codons from the termination codon. The insertion of two to five consecutive AGG (low-usage) arginine codons selectively reduced the production of full-length test protein to extents that depended on the number of AGG codons, the site of insertion, and the amount of test mRNA. Production of aberrant proteins was also stimulated at high levels of mRNA. The effects occurred primarily at the translational level and were not produced by CGU (high-usage) arginine codons. Our results are consistent with the idea that sufficiently high levels of the AGG mRNA can cause essentially all of the tRNA(AGG) in the cell to become sequestered in translating peptidyl-tRNA(AGG) -mRNA-ribosome complexes stalled at the first of two consecutive AGG codons and that the approach of an upstream translating ribosome stimulates a stalled ribosome of frameshift, hop, or terminate translation.

Arginine↗

PubMed1992

DNA sequencing by primer walking with strings of contiguous hexamers.

When template DNA is saturated with a single-stranded DNA binding protein (SSB), strings of three or four contiguous hexanucleotides (hexamers) can cooperate through base-stacking interactions to prime DNA synthesis specifically from the 3' end of the string. Under the same conditions, priming by individual hexamers is suppressed. Strings of three of four hexamers representing more than 200 of the 4096 possible hexamers primed easily readable sequence ladders at more than 75 different sites in single-stranded or denatured double-stranded templates 6.4 kilobases to 40 kilobase pairs long, with a success rate of 60 to 90 percent. A synthesis of 1 micromole of hexamer supplies enough material for thousands of primings, so multiple libraries of all 4096 hexamers could be distributed at a reasonable cost. Such libraries would allow rapid and economical sequencing. Automating this strategy could increase the speed and efficiency of large-scale DNA sequencing by at least an order of magnitude.

Base Sequence↗

PubMed1992

Cloning and expression of gene 4 of bacteriophage T7 and creation and analysis of T7 mutants lacking the 4A primase/helicase or the 4B helicase.

T7 gene 4, which is required for DNA replication, specifies two proteins whose coding sequences overlap in the same reading frame: the 4A protein, a 566-amino acid primase/helicase, and the 4B protein, a 503-amino acid helicase whose initiation codon is the 64th codon of the 4A protein. To study better the individual functions of these two overlapping proteins, we made clones that express both 4A and 4B proteins, only 4B protein, or only what we refer to as the 4A' protein, in which methionine 64 is replaced by leucine, thereby eliminating the 4B initiation codon. These clones provide considerably more gene 4 protein for biochemical analysis than do infected cells. They can also be used to isolate and propagate T7 gene 4 deletion mutants, and we have made T7 mutants which lack all gene 4 coding sequences, or which express 4A' protein but no 4B protein, or 4B protein but no 4A protein. Analysis of these phage mutants shows that 4A' protein without any 4B protein can support essentially normal replication and growth, whereas 4B protein without any 4A protein supports little replication or growth. Apparently, the primase activity of the 4A protein is essential for replication, but the 4B protein is dispensable, presumably because the 4A protein also supplies helicase activity. The mutation at amino acid 64 of 4A' appears to have little effect on 4A function. The rate of replication during normal T7 infection appears to be limited by the amount of gene 4 protein, but too high a level of either 4A or 4B protein is inhibitory to growth.

Base Sequence↗

PubMed1992

Large scale purification and biochemical characterization of T7 primase/helicase proteins. Evidence for homodimer and heterodimer formation.

A rapid purification procedure produces milligram amounts of the T7 gene 4A' primase/helicase, 4B helicase, and the wild-type 4AB proteins expressed from the clones described in the accompanying paper (Rosenberg, A. H., Patel, S. S., Johnson, K. A., and Studier, F. W. (1992) J. Biol. Chem. 267, 15005-15012). Purified 4A' protein (in which the wild-type methionine at amino acid 64 has been replaced by leucine to eliminate the 4B initiation codon) appears to be equivalent to the wild-type 4A protein in primase, helicase, and NTPase activities. Gel filtration chromatography and polyacrylamide gel electrophoresis of native proteins indicate that the 4A' and 4B proteins form homodimers and heterodimers in solution. Heterodimer formation presumably accounts for an observed 3-fold increase in the primase activity of 4A' upon addition of 4B that lacks primase activity of its own. Steady-state k(cat) and Km values for hydrolysis of the nucleoside triphosphates ATP, dATP, dTTP, and dGTP were measured for 4A', 4B, 4A'B (1:1), and wild-type 4AB (1:2) proteins. The dependence of the dNTPase activities on the concentration was hyperbolic, suggesting single or noncooperative binding sites, whereas ATPase activity was sigmoidal, suggesting more than one ATP binding site. The k(cat)/Km ratios for hydrolysis of the dNTPs by the four protein preparations were within a factor of 6 of each other. The 1:1 mixture of 4A'B had the highest k(cat)/Km ratios, with a preference for dATP and dTTP.

Cell Line↗

PubMed1991

Use of bacteriophage T7 lysozyme to improve an inducible T7 expression system.

Bacteriophage T7 lysozyme, a natural inhibitor of T7 RNA polymerase, can reduce basal activity from an inducible gene for T7 RNA polymerase and allow relatively toxic genes to be established in the same cell under control of a T7 promoter. Low levels of T7 lysozyme supplied by plasmids pLysS or pLysL, which are compatible with the pET vectors for expressing genes from a T7 promoter, are sufficient to stabilize many target plasmids and yet allow high levels of target protein to be produced upon induction of T7 RNA polymerase. Higher levels of lysozyme supplied by plasmids pLysE or pLysH reduce the fully induced activity of T7 RNA polymerase such that induced cells can continue to grow and produce innocuous target proteins indefinitely. Different configurations of the expression system can maintain several different steady-state levels of target gene expression. The presence of T7 lysozyme has the further advantage of facilitating the lysis of cells in preparing extracts for purification of target gene products.

Cloning, Molecular↗

PubMed1991

Controlling basal expression in an inducible T7 expression system by blocking the target T7 promoter with lac repressor.

Effects of placing a lac operator at different positions relative to a promoter for bacteriophage T7 RNA polymerase were tested. Transcription can be strongly repressed by lac repressor bound to an operator centered 15 base-pairs downstream from the RNA start, but T7 RNA polymerase initiates transcription very actively from this T7lac promoter-operator combination in the absence of repressor, or in the presence of repressor plus inducer. Sequence changes in the transcribed region were found to make transcription from some T7 promoters, including the T7lac promoter, more sensitive to inhibition by T7 lysozyme. The pET-10 and pET-11 series of plasmid vectors have been constructed to allow target genes to be placed under control of the T7lac promoter and to be expressed in BL21(DE3) or HMS174(DE3), which carry an inducible gene for T7 RNA polymerase. These vectors carry a lacI gene that provides enough lac repressor to repress both the T7lac promoter in the multicopy vectors and the chromosomal gene for T7 RNA polymerase, which is controlled by the lacUV5 promoter. Very low basal expression of target genes is achieved, but the usual high levels of expression are obtained upon induction. Addition of T7 lysozyme can reduce basal expression even further and still allow high levels of expression upon induction. Genes that are very toxic to Escherichia coli can be maintained and expressed in this system.

Base Sequence↗

PubMed1991

Creation of a T7 autogene. Cloning and expression of the gene for bacteriophage T7 RNA polymerase under control of its cognate promoter.

The coding sequence for bacteriophage T7 RNA polymerase has been cloned and expressed under control of a cognate T7 promoter, a configuration referred to as an autogene. Cloning a T7 autogene in a derivative of plasmid pBR322 in Escherichia coli was achieved by a combination of blocking initiation at the T7 promoter with bound lac repressor and inhibiting the polymerase itself by T7 lysozyme. Neither type of inhibition by itself was sufficient to control the autogene. Upon unblocking the T7 promoter with added inducer. T7 RNA polymerase produced its own mRNA, leading to autocatalytic production of polymerase protein. T7 autogenes may be useful for developing high-level gene expression systems in a variety of cell types, with little if any need for the host cell RNA polymerase.

Cloning, Molecular↗

PubMed1991

Resolution of branched DNA substrates by T7 endonuclease I and its inhibition.

Endonuclease I is a multipurpose enzyme implicated in the breakdown of host DNA, packaging of phage DNA, and recombination during the lytic cycle of bacteriophage T7. We investigate here some aspects of the substrate requirements for its activity in resolving branched intermediates similar to Holliday junctions (Holliday, R. (1964) Genet. Res. 5, 282-304) that arise in recombination. The enzyme is able to resolve branched substrates containing very short duplex arms: 4 base pairs suffice. It cleaves 5' to the branch, with a distinct preference for the non-crossover strands in Holliday-like model junctions. Ligands that interact strongly with the branch site can inhibit the enzyme, with KI values in the 10-50 microM range.

Base Sequence↗

PubMed1990

Characterization of a bimobile DNA junction.

We present here a chemical and enzymatic footprinting analysis of a branched DNA molecule formed from four complementary 50-mer strands. These strands are designed to form a stable junction, in which two steps of branch point migration freedom are possible. Exposure of the junction to Fe(II).EDTA shows protection of 3 or 4 residues in each strand at the branch, while two resolvase enzymes (endonuclease VII from phage T4 and endonuclease I from phage T7), cleave all four strand near the branch. Chemical footprinting of this junction using the reagents MPE.Fe(II) and (OP)2Cu(I) shows that the branch site is hyper-reactive to cutting induced by these probes as it is in an immobile four-arm junction. The effects involve more residues than in the immobile case. In the absence of divalent cations, the structure of the junction alters, sites of enhanced cleavage by MPE.Fe(II) and (OP)2Cu(I) disappear, and purines at the branch become reactive to diethyl pyrocarbonate. Our interpretation of these results is based on the properties of immobile junction analogs and their response to these probes. In the presence of Mg2+, the three migrational isomers coexist, each probably in the form of a 2-fold symmetric structure with two helical arms stacked.

Base Sequence↗