Biomedical subjects

F Z Cui

Publications and source records attributed to F Z Cui.

At least 19 recordsLinked to original sources

PubMed2007

Atomic force and confocal microscopy for the study of cortical cells cultured on silicon wafers.

The primary cortical cells were selected as a model to study the adherence and neural network development on chemically roughened silicon substrates without any coatings using confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM). The silicon substrates have a nano-range roughness (RMS) achieved by chemical etching using hydrofluoric (HF) acid. After 7 days of culturing, the neurons were observed to connect together and form dense neural networks. Furthermore, AFM results revealed that some porous structures at a few micrometer range existed between the neuron cells and the silicon substrates. It is suggested that the porous structures are made of extracellular matrix (ECM) components and play an important role in the neuronal adhesion and neurite outgrowth on the inert silicon wafers.

Animals↗

PubMed2006

Regulation of charged groups and laminin patterns for selective neuronal adhesion.

Primary neuronal cultures on substrates patterned with extracellular matrix proteins such as laminin have yielded much information regarding the physiological characteristics of neuronal cells in vitro. Surface charge also influences neuronal adherence, and a positive charge can have stimulatory effects. The attraction between laminin patterns and polycation films are of interest in the study of neuronal adhesion. We cultured primary hippocampal neurons on poly(ethylenimine) (PEI) films with laminin grids and evaluated their viability and morphology by means of fluorescent microscopy after 5-7 days. The results showed that the neurons did not form networks on the laminin grids. It is inferred that the PEI films were more favourable for neuronal adhesion than the laminin grid.

Animals↗

PubMed2006

Hyaluronic acid hydrogel immobilized with RGD peptides for brain tissue engineering.

In this paper, hyaluronic acid hydrogels with open porous structure have been developed for scaffold of brain tissue engineering. A short peptide sequence of arginine-glycine-aspartic acid (RGD) was immobilized on the backbone of the hydrogels. Both unmodified hydrogels and those modified with RGD were implanted into the defects of cortex in rats and evaluated for their ability to improve tissue reconstruction. After 6 and 12 weeks, sections of brains were processed for DAB and Glees staining. They were also labeled with GFAP and ED1 antibodies, and observed under the SEM for ultrastructral examination. After implanting into the lesion of cortex, the porous hydrogels functioned as a scaffold to support cells infiltration and angiogenesis, simultaneously inhibiting the formation of glial scar. In addition, HA hydrogels modified with RGD were able to promote neurites extension. Our experiments showed that the hyaluronic acid-RGD hydrogel provided a structural, three-dimensional continuity across the defect and favoured reorganization of local wound-repair cells, angiogenesis and axonal growth into the hydrogel scaffold, while there was little evidence of axons regeneration in unmodified hydrogel.

Absorbable Implants↗

PubMed2005

Hyaluronic acid hydrogel as Nogo-66 receptor antibody delivery system for the repairing of injured rat brain: in vitro.

Nogo-66 and NgR are important receptors inhibiting neuronal regeneration and therefore are targets for treating CNS injury. Antagonists of this receptor including blocking antibodies are potential therapeutic agents for CNS axonal injuries such as spinal cord and brain trauma. A new antibody (IgG) releasing system has been developed by covalently attaching IgG to the biodegradable hyaluronic acid (HA) hydrogel via the hydrolytically unstable hydrazone linkage, aiming to deliver the antibody of CNS regeneration inhibitors to the injured brain. In this paper we describe the synthesis, physico-chemical characteristics and test results of biological activity of antibody released from hyluronic acid hydrogel. To form the conjugates the antibody is attached to the polymer backbone using a condensation reaction between aldehyde group of the antibody and hydrazide group of the HA hydrogel. Furthermore, pH sensitive linkage-hydrozone has been formed between hydrogel and antibody. The amount of conjugated antibodies can reach 135 microg antibody/mg hydrogel in the dry state. At low pH, the antibodies released quite fast. However, the antibodies released much slower in neutral and alkaline environment. The bioactivity of antibody released from hydrogel was retained as demonstrated by indirect immunofluorescence technique.

Amino Acid Sequence↗

PubMed2005

Property variations in the prism and the organic sheath within enamel by nanoindentation.

Atomic force microscopy (AFM) combined with nanoindentation technique was used to definitely, site-specifically, test the nanomechanical properties, including nanohardness and elastic modulus, of the isolated domains within single enamel, the prisms and the surrounding sheaths, of mature human maxillary third molars. In this way, it is for the first time that evident differences of nanomechanical properties were revealed between these domains. The nanohardness and elastic modulus of the sheaths were about 73.6% and 52.7% lower than those of the prisms, respectively. Measuring the residual impressions with AFM supported the similar conclusion. The variations of mechanical properties in these domains are considered to be mainly relative to their different component and fibrils arrangement.

Biomechanical Phenomena↗

PubMed2005

AFM study of hippocampal cells cultured on silicon wafers with nano-scale surface topograph.

The rat hippocampal cells were selected as model to study the interaction between the neural cells and silicon substrates using atomic force microscopy (AFM). The hippocampal cells show tight adherence on silicon wafers with nano-scale surface topograph. The lateral friction force investigated by AFM shows significant increase on the boundary around the cellular body. It is considered to relate to the cytoskeleton and cellular secretions. After ultrasonic wash in ethanol and acetone step by step, the surface of silicon wafers was observed by AFM sequentially. We have found that the culture leftovers form tight porous networks and a monolayer on the silicon wafers. It is concluded that the leftovers overspreading on the silicon substrates are the base of cell adherence on such smooth inert surfaces.

Acetone↗

PubMed2004

Hierarchically biomimetic bone scaffold materials: nano-HA/collagen/PLA composite.

A bone scaffold material (nano-HA/ collagen/PLA composite) was developed by biomimetic synthesis. It shows some features of natural bone both in main composition and hierarchical microstructure. Nano-hydroxyapatite and collagen assembled into mineralized fibril. The three-dimensional porous scaffold materials mimic the microstructure of cancellous bone. Cell culture and animal model tests showed that the composite material is bioactive. The osteoblasts were separated from the neonatal rat calvaria. Osteoblasts adhered, spread, and proliferated throughout the pores of the scaffold material within a week. A 15-mm segmental defect model in the radius of the rabbit was used to evaluate the bone-remodeling ability of the composite. Combined with 0.5 mg rhBMP-2, the material block was implanted into the defect. The segmental defect was integrated 12 weeks after surgery, and the implanted composite was partially substituted by new bone tissue. This scaffold composite has promise for the clinical repair of large bony defects according to the principles of bone tissue engineering.

Animals↗

PubMed2004

Measuring membrane potential and electric field of brainstem neurons in vitro by confocal microscopy.

A method of measuring transmembrane potential and electric field of neural cells cultured in vitro is described in this paper. The high resolution and scanning speed of the method make it considerable to be used to observe the viability of the neurons cultured on opaque substrate. Rhodamine 123 was used to stain the cells in order to display different intensity corresponding to transmembrane potential. The fluorescence data were collected by confocal laser scanning microscopy (CLSM). Then the data were processed to create the graphs of transmembrane potential and electric field. This is the first paper describes a reliable method for three-dimensional visualization of potential voltage of neurons at the best of our knowledge.

Animals↗

PubMed2004

Hierarchical structural comparisons of bones from wild-type and liliput(dtc232) gene-mutated Zebrafish.

The alterations of hierarchical structures of bone by gene mutation in the zebrafish, which is associated with abnormal bone mineralization and bone disease, were reported for the first time in this paper. Bone samples from the liliput(dtc232) (lil) mutants as well as normal controls were studied by polarized light microscope, scanning electron microscope (SEM), transmission electron microscope (TEM), and atomic force microscope (AFM). Light microscopy examinations reveal that the lil bone has asymmetric mineralization and much thinner bone wall. The SEM studies show a lot of microcracks in lil bone wall. And the plywood-like structure of the normal bone does not exist in the lil bone, which is confirmed by the measurements of polarized light microscope. Furthermore, the TEM investigations display the collagen fibrils with two typical diameters. For the thinner collagen fibrils, the diameter of lil bone is about twice larger than that of the wild-type bone. And for the thicker one, there is a small increase in diameter after mutation and the band periodicity of the lil bone is similar with that of wild-type bone, which is consistent with the result of AFM. The morphologies of the minerals revealed that the mutated mineral was in bigger size and the shape was irregular but not plate-shaped.

Animals↗

PubMed2003

Lumbar spinal fusion with a mineralized collagen matrix and rhBMP-2 in a rabbit model.

STUDY DESIGN: A new mineralized collagen matrix combined with or without growth factor was used for the posterolateral spinal fusion in the rabbit lumbar spine. OBJECTIVES: The availability of a new osteoconductive matrix with or without recombinant osteoinductive growth factors offers a possible alternative to the use of autogenous bone for grafting indications. This study evaluated the bone-forming activity of the biomimetic matrix: nano-hydroxyapatite/collagen/polylactic acid (nHAC/PLA) combined without or with recombinant human bone morphogenetic protein-2 (rhBMP-2) in a rabbit posterolateral spinal fusion. SUMMARY OF BACKGROUND DATA: Many bone grafting materials such as titanium alloy, ceramics, and polymers were used to repair bony defects. However, each has specific disadvantaged. The permanent implantation still has possibility to be eroded in vivo, which is caused by late breakdown and abscess formation. The acidic outcome of polymer biodegradation was also negatively affected in the later-stage results of bone repair. It needed a promising material for an alternative to the use of autogenous bone for grafting indications. MATERIALS AND METHODS: Sixty-four rabbits were randomly divided into four groups: autologous iliac crest bone group (ACB), nHAC/PLA composite group (nHAC/PLA), autologous iliac crest bone mixed with nHAC/PLA composite group (ACB + nHAC/PLA), nHAC/PLA composite with recombinant human BMP-2 group (nHAC/PLA + rhBMP-2). The lumbar intertransverse process fusions were assessed by manual palpation, radiographic, histologic, and mechanical strength, and scanning electronic microscopy (SEM) in a 10-week observation. RESULTS: Optimal formulations of the ACB + nHAC/PLA and nHAC/PLA + rhBMP-2 groups were shown to perform similar to ACB in both the fusion ratio and mechanical strength in the 6 and 10 weeks after surgery. From the microstructure analysis of the samples, there was no negative effect when the compound implanted this composite with autogenous iliac crest, and there was also new bone-like tissue formation implanted this composite without combined rhBMP-2 early at the second week after surgery. CONCLUSIONS: This study shows the effective results of nHAC/PLA in rabbit posterolateral spinal fusion combined with rhBMP-2. It is an alternative method to autograft by compounding this osteoconductive matrix with growth factors.

Animals↗

PubMed2003

Effect of spinal cord injury on urinary bladder spinal neural pathway: a retrograde transneuronal tracing study with pseudorabies virus.

OBJECTIVES: To determinate the effect of acute and chronic spinal cord injury (SCI) resulting from thoracic cord transection on the urinary bladder spinal neural pathway. METHODS: Seventy-six adult Sprague-Dawley rats were randomly divided into four groups, non-SCI (normal rats undergoing no surgical procedure except pseudorabies virus [PRV] injection), SCI(b) (SCI and PRV injected immediately after SCI), SCI(c) (SCI and PRV injected at 3 weeks after SCI), and SCI(d) (SCI and PRV injected at 3 months after SCI). Transcardiac perfusion fixation was done at appropriate survival periods after PRV injection into the bladder wall tissue. Sections of the dorsal root ganglion, spinal cord, and brain were processed for visualization of the virus by the streptavidin-peroxidase immunohistochemical procedure. RESULTS: The bladder weight of the non-SCI, SCI(b), SCI(c), SCI(d) rats was 144 +/- 9 mg, 142 +/- 8 mg, 486 +/- 51 mg, and 656 +/- 69 mg, respectively. The time-ordered flow charts of PRV tracing were similar in the non-SCI and SCI rats. The cross-sectional area of the labeled dorsal root ganglion cell profiles increased significantly after SCI (P <0.001): 593 +/- 40 microm2, 588 +/- 39 microm2, 815 +/- 53 microm2, and 902 +/- 57 microm2 in the non-SCI, SCI(b), SCI(c), SCI(d) rats, respectively. The number of labeled cells in the dorsal horn in the L6 and S1 segments 3 days after PRV injection markedly increased in chronic SCI rats, as did the number of labeled motor neurons 4 days after injection. CONCLUSIONS: Acute and chronic SCI have no effect on the process of virus transneuronal transport below the level of the lesion. Subsequent to chronic SCI, reorganization of the micturition reflex pathways may occur.

Acute Disease↗

PubMed2003

Covalent immobilization of chitosan and heparin on PLGA surface.

Chitosan and heparin were covalently immobilized onto a poly(lactic acid-co-glycolic acid) (PLGA) surface using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC), N-hydroxysuccinimide (NHS) in a 2-morpholinoethane sulfonic acid (MES) buffer system. The properties of the modified PLGA surface and the control were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water contact angle of the modified film was greatly decreased and the element content on the surface of the films changed correspondingly. Platelet adhesion assay showed that blood compatibility of the chitosan/heparin modified film was improved while hepatocyte culture indicated that the cell compatibility of the modified film was enhanced.

Animals↗

PubMed2003

Crosslinked collagen/chitosan matrix for artificial livers.

Matrices composed of collagen and chitosan may create an appropriate environment for the regeneration of livers. In this study, we have prepared, characterized and evaluated a new collagen/chitosan matrix (CCM). The CCM was made by using crosslinking agent 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) in N-hydroxysuccinimide (NHS) and a 2-morpholinoethane sulfonic acid (MES) buffer system. The chemical characteristics were evaluated by Fourier-transformed infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The mechanical strength was measured by tensile tests. The platelet deposition and hepatocyte culture experiments show that CCM has excellent blood and cell compatibility. The results suggest that the CCM is a promising candidate matrix for implantable bioartificial livers.

Animals↗

PubMed2003

Organization of apatite crystals in human woven bone.

The organization of collagen fibrils differs in woven bone and lamellar bone, and it reflects certain aspects of the nature of the mineral crystals associated with them. In order to investigate the morphology and distribution of apatite crystals in woven bone, mineralized collagen fibrils and isolated crystals from the mid-diaphyses of human fetal femurs were observed with scanning and transmission electron microscopy and high-resolution electron microscopy. A number of features of woven bone were observed for the first time by these means. Similar to mature crystals from lamellar bone, the apatite crystals in woven bone are also platelet-shaped. However, most likely because of a high rate of old bone resorption and new bone formation in woven material, the average crystal dimensions are considerably smaller than those of mature crystals in lamellar bone. Apatite crystals were noted on the surface of collagen fibrils in woven bone. In densely packed woven bone, the periodicity of mineral deposited on individual fibrils is in registration over many fibrils. In addition to their association with collagen surfaces, crystals also appear distributed in both extrafibrillar and intrafibrillar collagen regions. In both cases, the minerals are crystalline and defect-free. These characteristics provide insight into the spatial and temporal relation between collagen and mineral that is the basis for the structure and organization of the mineral comprising human woven bone.

Apatites↗

PubMed2003

Synthesis and biocompatibility of porous nano-hydroxyapatite/collagen/alginate composite.

Porous nano-hydroxyapatite/collagen/alginate (nHAC/Alginate) composite containing nHAC and Ca-crosslinked alginate is synthesized biomimetically. This composite shows a significant improvement in mechanical properties over nHAC material. Mechanical test results show that the compressive modulus and yield strength of this composite are in direct proportion to the percentage of Ca-crosslinked alginate in the composite. Primary biocompatibility experiments in vitro including fibroblasts and osteoblasts co-culture with nHAC/alginate composite indicated the high biocompatibility of this composite. Therefore the composite can be a promising candidate of scaffold material for bone tissue engineering.

Journal Article↗

PubMed2002

Culture of neural cells on silicon wafers with nano-scale surface topograph.

The adherence and viability of central neural cells (substantia nigra) on a thin layer of SiO(2) on Si wafers with different surface roughness were investigated. Variable roughness of the Si wafer surface was achieved by etching. The nano-scale surface topography was evaluated by atomic force microscopy. The adherence and subsequent viability of the cells on the wafer were examined by scanning electron microscopy (SEM) and fluorescence immunostaining of tyrosine hydroxylase (TH). It is found that the surface roughness significantly affected cell adhesion and viability. Cells survived for over 5 days with normal morphology and expressed neuronal TH when grown on surfaces with an average roughness (Ra) ranging from 20 to 50 nm. However, cell adherence was adversely affected when surfaces with Ra less than 10 nm and rough surfaces with Ra above 70 nm were used as the substrate. Such a simple preparation procedure may provide a suitable interface surface for silicon-based devices and neurones or other living tissues.

Animals↗

PubMed2002

Biomimetic calcium phosphate coatings on Polyactive 1000/70/30.

Precalcification of Polyactive 1000/70/30 with a biomimetic calcium phosphate coating is expected to enhance the bioactivity of this biodegradable polymer for the application as bone filler or scaffold of bone tissue engineering. This study presents a 1-day one-step incubation method to obtain either amorphous or bone-like apatitic calcium phosphate coating on Polyactive 1000/70/30. Either dense plates or three-dimensional porous blocks of the polymer were incubated in a simplified but concentrated simulated body fluid-derived solution at 37 degrees C. By bubbling CO2 gas, a solution was prepared with calcium and phosphate ion concentrations five times of that of regular simulated body fluid. With controlled stirring, the CO2 was released out of the solution and exchanged by air. The pH of the solution increased to induce coating formation. Adjusting stirring rate and CO2/air exchange rate controlled the process kinetics. The reaction kinetics had little influence on the crystallographic structure of the final coating mineral for a given solution composition as shown by Fourier transform infrared spectroscopy and X-ray diffraction. However, the interface structure between the coating and substrate was kinetics-dependent. A fast precipitation condition resulted in a uniform but superficial calcification pattern at the surface of polymer. A slow process by selecting either a slow stirring or a slow CO2/air exchange, on the contrary, induced a localized but deep inside calcification pattern. A tensile test showed no statistically significant difference in the mechanical properties among uncoated and coated polymers. The cracking behavior of coatings from different kinetics, however, exhibited different manners, as can be attributed to different interface structures and interfacial strengths.

Bone Substitutes↗

PubMed2002

Variation of nanomechanical properties of bone by gene mutation in the zebrafish.

Significant variations of nanomechanical properties and fracture morphology between gene-mutated liliput(dtc232) (lil/lil) zebrafish skeletal bone and wild-type bone have been observed. Nanoindentation measurement disclosed that lil/lil bone has 36% lower nanohardness and 32% lower elastic modulus. The standard deviations of hardness and elastic modulus of lil/lil bone were both much higher than those of wild-type bone. SEM morphology of fracture surfaces further revealed that in bones after gene mutation, formative microcracks make the performance reduction and the increasing of brittleness. What is more, the plywood-like structure of the normal bone does not exist in the lil/lil bone.

Animals↗