Biomedical subjects

FJ Humphreys

Publications and source records attributed to FJ Humphreys.

2 recordsLinked to original sources

PubMed1999

Quantitative metallography by electron backscattered diffraction.

Although electron backscattered diffraction (EBSD) in the scanning electron microscope is used mainly to investigate the relationship between local textures and microstructures, the technique has now developed to the stage where it requires serious consideration as a tool for routine quantitative characterization of microstructures. This paper examines the application of EBSD to the characterization of phase distributions, grain and subgrain structures and also textures. Comparisons are made with the standard methods of quantitative metallography and it is shown that in many cases EBSD can produce more accurate and detailed measurements than the standard methods and that the data may sometimes be obtained more rapidly. The factors which currently limit the use of EBSD for quantitative microstructural characterization, including the speed of data acquisition and the angular and spatial resolutions, are discussed, and future developments are considered.

Journal Article↗

PubMed1999

Electron backscatter diffraction of grain and subgrain structures - resolution considerations.

Characterization of microstructures containing small grains or low-angle grain boundaries by electron backscattered diffraction (EBSD) is limited by the spatial and angular resolution limits of the technique. It was found that the best effective spatial resolution (60 nm) for aluminium alloys in a tungsten-filament scanning electron microscope (SEM) was obtained for an intermediate probe current which provided a compromise between pattern quality and specimen interaction volume. The same specimens and EBSD equipment when used with a field-emission gun SEM showed an improvement in spatial resolution by a factor of 2-3. For characterizing low-angle boundary microstructures, the precision of determining relative orientations is a limiting factor. It was found that the orientation noise was directly related to the probe current and this was interpreted in terms of the effect of probe current on the quality of the diffraction patterns.

Journal Article↗