Biomedical subjects

Fabio Ganazzoli

Publications and source records attributed to Fabio Ganazzoli.

10 recordsLinked to original sources

PubMed2006

Computer simulation of bulk mechanical properties and surface hydration of biomaterials.

Some intrinsic properties of biomaterials are calculated with atomistic computer simulations through energy minimizations and molecular dynamics methods. The mechanical properties of bulk polymers such as poly(vinyl alcohol) and poly(ethylene terephthalate) are obtained in terms of the Young's modulus, the bulk and shear moduli, and the Poisson ratio below the glass transition temperature. The calculated values apply to an ideal, defect-free sample, and therefore, they correspond to the theoretical upper limit for the mechanical behavior of these materials. The surface hydration of the same polymers and of graphite is analyzed in terms of the statistical distribution of the water molecules near the surfaces of these materials that range from hydrophilic to strongly hydrophobic. Consistent with recent spectroscopic evidence, it is found that water forms relatively ordered hydration shells driven by hydrogen bonds above the hydrophilic surface, but is highly disordered over the hydrophobic one. Therefore, it is suggested that computer simulations provide a new useful tool to investigate various aspects of biomaterials.

Biocompatible Materials↗

PubMed2006

Protein adsorption on the hydrophilic surface of a glassy polymer: a computer simulation study.

Using atomistic computer simulations, we study the adsorption of different globular protein fragments with different secondary structures on the surface of a hydrophilic glassy polymer, poly(vinyl alcohol), or PVA, and compare the results with our earlier calculations on hydrophobic graphite. The simulations were mainly carried out with implicit solvent in an effective dielectric medium by energy minimizations and molecular dynamics at room temperature. We find that on the hydrophilic PVA surface the fragments basically retain their globular shape with an incomplete denaturation, at variance with our earlier results for the same fragments on graphite. Correspondingly, the interaction energy between the fragments and the surface is significantly smaller than on graphite, both because less residues are in contact with the surface, and because they interact more weakly. Moreover, very few hydrogen bonds are formed between the adsorbate and the PVA surface, since both the protein fragments and the polymer chains separately optimize these interactions. Additional molecular dynamics simulations in explicit solvent were also performed to study the hydration of the adsorbed fragments and to estimate the possible solvation effects.

Adsorption↗

PubMed2006

Adsorption of charged albumin subdomains on a graphite surface.

We report some new molecular dynamics simulation results about the adsorption on a hydrophobic graphite surface of two albumin subdomains, each formed by three different alpha-helices, considering the correctly charged side groups at pH = 7 instead of the neutral ones as done in our previous exploratory paper (Raffaini and Ganazzoli, Langmuir 2003;19:3403-3412). We find that the presence of charges affects somewhat the initial adsorption stage on the electrostatically neutral surface, but not the final one. Thus, we recover the result that a monolayer of aminoacids is eventually formed, with a rough parallelism of distant strands to optimize both the intramolecular and the surface interactions. This feature is consistent with the adsorption on the hydrophobic surface being driven by dispersion forces only, and with the "soft" nature of albumin. Additional optimizations of the final monolayer carried out at pH = 3 and 11 do not modify appreciably this picture, suggesting that adsorption on graphite is basically independent of pH. The enhanced hydration of the final adsorption state due to the (delocalized) charges of the side groups is also discussed in comparison with similar results of the neutralized subdomains.

Adsorption↗

PubMed2005

Computer simulation of polypeptide adsorption on model biomaterials.

When biomaterials are inserted in a biological environment, for instance in a body implant, proteins do quickly adsorb on the exposed surface. Such process is of fundamental importance, since it directs the subsequent cell adhesion. Here we review recent advances in this field obtained with molecular simulations. While coarse-grained models can provide important general results, as it has long been recognized in polymer science, the hierarchical structure of a very complex copolymer such as a protein, together with the nature of the biomaterial surface suggest that atomistic models are better suited to investigate these phenomena. Thus, after briefly mentioning some common features of coarse-grained and atomistic force fields, we first discuss early theoretical and coarse-grained simulation results about protein adsorption, and then we highlight the main results recently obtained by us with atomistic models. In particular, we discuss some conformational and energetic aspects of the adsorption of protein fragments with different secondary structure on surfaces of different wettability, including hydrophobic graphite and hydrophilic poly(vinylalcohol). We also consider other features, such as the simulation of the materials wettability, the hydration of the adsorbed fragments, their kinetics of spreading, and the sequential adsorption of two protein fragments on top of each other, highlighting the results of general interest.

Adsorption↗

PubMed2005

Phthalazine PDE IV inhibitors: conformational study of some 6-methoxy-1,4-disubstituted derivatives.

This report describes the detailed conformational analysis and synthesis of a series of phthalazine phosphodiesterase-type (IV) (PDE IV) inhibitors bearing either mono- or dichloro 4-methylenepyridine at the 'down' position of the phthalazine nucleus or different heterocycles at the 'top' position 4 of the phthalazine moiety. Both the mono- and dichloro 4-methylenepyridine units linked at carbon C1 of the phthalazine nucleus show identical conformational behaviour with the substituent preferentially oriented towards the external part of the molecule and the pyridine plane almost orthogonal to that of phthalazine ring. The heterocyclic five-membered rings linked at carbon C4 of phthalazine show quite different conformational behaviour. The 1,3-thiazole ring exists in a well-defined conformation almost coplanar with respect to the phthalazine nucleus while the 1,2,4-triazole and the 1,3-diazole heterocycles show a great conformational freedom with large torsion angles. Compound 3 bearing the thiazole ring at C4 displays the major biological activity, thus suggesting that a planar and rather rigid conformation of the pentacycle should favour the PDE IV inhibition capacity of this class of compounds.

3',5'-Cyclic-AMP Phosphodiesterases↗

PubMed2004

Molecular dynamics simulation of the adsorption of a fibronectin module on a graphite surface.

We report atomistic simulations of the adsorption of a fibronectin type I module on a hydrophobic graphite surface. This module comprises only beta-sheets, unlike the albumin fragments previously investigated by us which contained only alpha-helices (Raffaini, G.; Ganazzoli, F. Langmuir 2003, 19, 3403-3412). As done in the latter case, most simulations are carried out in an effective dielectric medium by energy minimizations and molecular dynamics (MD). Further optimizations and MD runs in the explicit presence of water are also performed to assess the stability of the geometries found and to describe the solvation of the adsorbed fibronectin module. The initial adsorption is accompanied by local rearrangements of the strands in contact with the surface, but the overall molecular structure is largely preserved. Much larger rearrangements take place at longer times as found through the MD runs, with the molecule spreading as much as possible so as to maximize the surface coverage, hence the interaction energy, despite a significant strain energy. Energetic aspects of adsorption together with the concomitant size change are discussed in comparison with our previous results for two albumin fragments.

Adsorption↗

PubMed2004

Size and persistence length of molecular bottle-brushes by Monte Carlo simulations.

Single-chain simulations of densely branched comb polymers, or "molecular bottle-brushes" with side-chains attached to every (or every second) backbone monomer, were carried out by off-lattice Monte Carlo technique. A coarse-grained model, described by hard spheres connected by harmonic springs, was employed. Backbone lengths of up to 100 units were considered, and compared with the corresponding linear chains. The backbone molecular size was investigated as a function of its length at fixed arm size, and as a function of the arm size at fixed backbone length. The apparent swelling exponents obtained by a power-law fit were found to be larger than those for the corresponding linear polymers, indicative of stiffening of the comb backbone. The probability distribution function for the backbone end-to-end distance was also investigated for different backbone lengths and arm sizes. Analysis of this function yielded the critical exponents, which revealed an increase in the swelling exponent consistent with values found from the molecular size. The apparent persistence length of the backbone was also determined, and was found to increase with increasing branching density. Finally, the static structure factors of the whole bottle-brushes and of their backbones are discussed, which provides another consistent estimate of the swelling exponents.

Computer Simulation↗

PubMed2003

Macrocycle conformation and self-inclusion phenomena in octakis(3-O-butanoyl-2,6-di-O-pentyl)-gamma-cyclodextrin (Lipodex E) by NMR spectroscopy and molecular dynamics.

Octakis(3-O-butanoyl-2,6-di-O-pentyl)-gamma-cyclodextrin (Lipodex E) is a lipophilic chiral selector successfully used for the enantioselective gas chromatographic separation of a multitude of racemic analytes. NMR data (13C chemical shifts, 3J(HH), rotating frame NOEs (ROEs)) and molecular dynamics (MD) simulations point out that the macrocycle is distorted with respect to the canonical truncated-cone shape of native cyclodextrins, although C(8) symmetry is retained on the NMR timescale. ROE data and MD trajectories provide evidence for self-inclusion of one 6-O-pentyl pendant chain within the cavity of Lipodex E. The interpretation of long-range and low-intensity ROEs is supported by the calculation of average internuclear distances by using the radial distribution function (RDF) calculated from MD trajectories. MD simulations are eventually used to compare the flexibility of the macrocycle of Lipodex E with that of native gammaCD.

Computer Simulation↗

PubMed2003

New interpretation of local dynamics of poly(dimethyl siloxane) observed by quasielastic neutron scattering.

Synthetic and natural polymers have complex dynamic behavior with distinct motions taking place on a wide range of time and length scales. For poly(dimethyl siloxane) we show that, at temperatures above the melting point, the reorientation of the CH3 groups provides a non-negligible contribution to the incoherent dynamic structure factor. Analysis of the quasielastic neutron scattering data is carried out using a model function that includes fast rotational motion of the CH3 groups and local conformational transitions between isomeric states. By using this model, detailed comparison between experimental data and theoretical predictions at distances where deviations from the traditional Rouse model are expected becomes possible.

Data Interpretation, Statistical↗

PubMed2002

Albumin adsorption onto pyrolytic carbon: a molecular mechanics approach.

A number of implants of cardiac valve prosthesis, vascular prosthesis, and coronary stents present a pyrolytic carbon interface to blood. Plasma protein adsorption is essential for the hemocompatibility of the implanted devices. This work quantitatively evaluates the molecular interaction force between a biomaterial surface (pyrolytic carbon) and plasma protein (albumin) binding sites through a simplified molecular model of the interface consisting of (i) multioriented graphite microcrystallites; (ii) selected fragments of albumin; and (iii) a water environment. A number of simplifying assumptions were made in the calculation: the albumin molecule was divided into hydrophobic and hydrophilic subunits (helices); an idealized clean, nonoxidized polycrystalline graphite surface was assumed to approximate the surface of pyrolytic carbon. The interaction forces between albumin helices and pyrolytic carbon surfaces are evaluated from potential energy data. These forces are decomposed into a normal and a tangential component. The first one is calculated using a docking procedure (F( perpendicular tot MAX) = 4.16 x 10(-20) N). The second one (F( parallel)), calculated by mean of geometric models estimating the energy variation associated with the protein sliding on the material surface, varies within the range +/-9.62 x 10(-21) N. The molecular simulations were performed using the commercial software package Hyperchem 5.0 (Hyperchem, Hypercube, Canada).

Adsorption↗