PubMed Health⌕ Search

Biomedical subjects

Fabio Sonvico

Publications and source records attributed to Fabio Sonvico.

9 recordsLinked to original sources
PubMed2026

Lpb. plantarum inhalation powders for the reduction of lung inflammation and S. aureus growth control in non-CF bronchiectasis.

INTRODUCTION: The reduced diversity of the lung microbiome in respiratory conditions, including bronchiectasis, promotes bacterial infection and inflammation, contributing to worsening clinical outcomes. Traditional treatments often fail to address both infection and inflammation. Because of their potential dual-action, lactic acid bacteria (LAB) directly administered to the lungs could represent an innovative therapeutic approach for these diseases. RESEARCH DESIGN AND METHODS: Two powders for inhalation containing Lpb. plantarum, lactose, l-leucine with and without raffinose, a prebiotic, were produced by spray drying and in vitro tested. The focus was on investigating their potential in vitro anti-inflammatory and anti-microbial activities against S. aureus. RESULTS: The powders showed a fine particle fraction (<5&#x2009;&#xb5;m) of >40% and allowed the maintenance of anti -inflammatory activity in vitro for both treatment and prevention. Moreover, both powders led to a significant reduction in S. aureus growth. The stability study of the powders in capsules at different storage conditions showed the preservation of the LAB up to 90&#x2009;days in refrigerated conditions (4&#xb0;C/-20&#xb0;C). CONCLUSIONS: This proof-of-concept study shows that inhalable spray-dried live LABs retain biological activity and are suitable for pulmonary delivery, supporting their potential as a microbiota-modulating therapy, which, however, requires further preclinical validation.

Inhalation↗
PubMed2006

Assemblage of novel release modules for the development of adaptable drug delivery systems.

The aim of this paper was to study the applicability of the release module assemblage technology for an adaptable control of drug delivery rate and site. The elementary release module was a swellable matrix having one base convex and the other concave, named Dome Matrix. The swelling and release behavior of the release module was studied. The presence of the convex and concave bases in the swellable matrix slightly changed the overall drug delivery kinetics exhibited by a flat base cylindrical matrix having the same weight and composition. The swelling and drug release of the individual bases of the matrix was also studied to investigate the effect of the surface shape. The concave, convex and flat bases exhibited different swelling and release kinetics. The convex base released drug at faster rate than the concave base, whereas the flat base was intermediate. The release mechanisms of convex and concave bases were significantly different. The Dome Matrix module was selected for assembling several modules in a delivery system obtained by a guided insertion of the convex base into the concave base or by concave/concave base sticking. The module assemblage shows different drug release behavior depending on the geometry of assembled systems.

Delayed-Action Preparations↗
PubMed2006

The effect of residual water on antacid properties of sucralfate gel dried by microwaves.

The aim of this work was to study the acid neutralization characteristics of microwave-dried sucralfate gel in relation to the water content and physical structure of the substance. Several dried sucralfate gels were compared with humid sucralfate gel and sucralfate nongel powder in terms of neutralization rate and buffering capacity. Humid sucralfate gel and microwave-dried gel exhibited antacid effectiveness. In particular, the neutralization rate of dried gel powders was inversely related to the water content: as the water content of dried powders decreased, the acid reaction rate linearly increased. The relationship was due to the different morphology of dried sucralfate gels. In fact, the porosity of the dried samples increased with the water reduction. However, the acid neutralization equivalent revealed that the dried sucralfate gel became more resistant to acid attack in the case of water content below 42%. Then, the microwave drying procedure had the opposite effect on the reactivity of the aluminum hydroxide component of dried sucralfate gel powders, since the rate of the reaction increased whereas the buffering capacity decreased as the amount of water was reduced.

Antacids↗
PubMed2005

Mechanisms of formation and disintegration of alginate beads obtained by prilling.

In this paper, compendial sodium alginate beads have been manufactured by laminar jet break-up technology. The effect of polymer concentration, viscosity and polymeric solution flow rate on the characteristics of beads was studied. Size distribution of alginate beads in the hydrated state was strongly dependent on the flow rate and viscosity of polymer solutions, since a transition from laminar jet break-up conditions to vibration-assisted dripping was observed. The re-hydration kinetics of dried beads in simulated gastric fluid (SGF) showed that the maximum swelling of beads was reached after 1-2 h, with an increase in volume of two to three times and a time lag dependent on the polymer concentration. The re-hydration swelling profiles in simulated intestinal fluid (SIF) showed no time lag and higher swelling volume; moreover, in this medium after the maximum swelling was reached, the bead structure was quickly disaggregated because of the presence in the medium of phosphate able to capture calcium ions present in the alginate gel structure.

Alginates↗
PubMed2005

Effect of residual water content on the physico-chemical properties of sucralfate dried gel obtained by microwave drying.

The purpose of this study was to investigate the physico-chemical characteristics of sucralfate humid gel dried by microwaves, in relation to the residual water content. Differential scanning calorimetry (DSC) allowed for the determination of the water state in sucralfate samples. Fourier-transform infrared (FT-IR) spectroscopy was used to monitor the changes in sucralfate gel structure induced by the microwave drying. A boundary value of total water content for sucralfate gel samples was found at 42% (w/w). Below this value only bound water was present, whereas above this value, the increase in total water was due to free water. In the physical form of gel, the strength of the coordination between sulfate anions and the positively charged aluminum hydroxide was dependent on the residual water content. The study of the sedimentation behavior of water suspensions prepared with dried sucralfate allowed for the evaluation of the retention of gel properties. We found that the microwave drying process affected the sedimentation of sucralfate dried gel suspensions independent of the residual water content: when suspensions were prepared from sucralfate dried gel powders containing more than 42% (w/w) of residual water, the sedimentation ratio was higher than 0.9. The non-gel powder suspension showed a sedimentation ratio of 0.68 +/- 0.02, whereas the sucralfate humid gel suspension did not sediment.

Anti-Ulcer Agents↗
PubMed2005

Metallic colloid nanotechnology, applications in diagnosis and therapeutics.

In recent years the fields of medicine and biology assist to an ever-growing innovation related to the development of nanotechnologies. In the pharmaceutical domain, for example, liposomes, polymer based micro and nanoparticles have been subjects of intense research and development during the last three decades. In this scenario metallic particles, which use was already suggested in the first half of the '80, are now experiencing a real renaissance. In the field of diagnosis, magnetic resonance imaging is one of the first and up to now the most developed application of metallic particles. But beside this application, a very new generation of biosensors based on the optical properties of colloidal gold and fluorescent nanocrystals, called quantum dots seems to be ready to be implemented in diagnosis and medical imaging. Concerning therapeutic applications, the potentialities of metal nanoparticles to help fulfilling the need of time and space controlled release of drugs has been intuited for a long time. Nowadays, magnetically guided carriers or thermal responsive matrices, in which drug release is triggered by the heating of metal nanoparticles, are effective examples of their application in drug delivery, while more recently efforts to develop metallic nanoobjects to be used as vectors of nucleic acids for vaccination and transfection have been multiplied. In the future, one of the most interesting challenges is certainly the use of metallic nanoparticles for an innovating, effective and selective physical treatment of solid tumors via targeted intracellular hyperthermia.

Animals↗
PubMedDate not supplied

Specific antitumor targetable beta-cyclodextrin-poly(ethylene glycol)-folic acid drug delivery bioconjugate.

The tumor targeting properties of a new drug carrier synthesized by bioconjugation of folic acid (FA) to beta-cyclodextrins through a poly(ethylene glycol) (PEG) spacer (CD-PEG-FA) were investigated. Surface plasmon resonance demonstrated that CD-PEG-FA specifically interacts with immobilized folate binding protein (FBP) while the naked beta-cyclodextrins do not display any specific interaction. In vitro studies demonstrated that CD-PEG-FA was devoid of cell toxicity. [(3)H]-folic acid/CD-PEG-FA competition binding investigations performed with folate receptor overexpressing human epidermal carcinoma KB cells showed that CD-PEG-FA had about 14 times lower tumor cell binding capacity than free folic acid. The carrier cell trafficking properties were investigated using rhodamine-B as fluorescent probe, which possesses 3000 and 4580 M(-)(1) inclusion constants for CD-PEG-FA and beta-cyclodextrins, respectively. Cell-associated fluorescence measurements showed that CD-PEG-FA does not promote the rhodamine-B uptake into non-folate receptor expressing human lung carcinoma MCF7 cells while 19% higher accumulation in KB cells was found with respect to rhodamine-B loaded beta-cyclodextrins. Confocal laser scanning microscopy indicated the presence of cytosolic red fluorescent spots after 2 h of incubation of KB cells with rhodamine-B included CD-PEG-FA. The fluorescent dye resided primarily in small spots, namely, endosomes and multivesicular bodies. At 1 h after pulsed incubation, wider red fluorescent cellular structures appeared as a fusion of previous structures.

Antineoplastic Agents↗
PubMedDate not supplied

Folate-conjugated iron oxide nanoparticles for solid tumor targeting as potential specific magnetic hyperthermia mediators: synthesis, physicochemical characterization, and in vitro experiments.

New folate-conjugated superparamagnetic maghemite nanoparticles have been synthesized for the intracellular hyperthermia treatment of solid tumors. These ultradispersed nanosystems have been characterized for their physicochemical properties and tumor cell targeting ability, facilitated by surface modification with folic acid. Preliminary experiments of nanoparticles heating under the influence of an alternating magnetic field at 108 kHz have been also performed. The nanoparticle size, surface charge, and colloidal stability have been assessed in various conditions of ionic strength and pH. The ability of these folate "decorated" maghemite nanoparticles to recognize the folate receptor has been investigated both by surface plasmon resonance and in folate receptor expressing cell lines, using radiolabeled folic acid in competitive binding experiments. The specificity of nanoparticle cellular uptake has been further investigated by transmission electron microscopy after incubation of these nanoparticles in the presence of three cell lines with differing folate receptor expression levels. Qualitative and quantitative determinations of both folate nanoparticles and nontargeted control nanoparticles demonstrated a specific cell internalization of the folate superparamagnetic nanoparticles.

Cell Line, Tumor↗