Biomedical subjects

Fausto Sanz

Publications and source records attributed to Fausto Sanz.

16 recordsLinked to original sources

PubMed2006

Conductance maps by electrochemical tunneling spectroscopy to fingerprint the electrode electronic structure.

We describe a methodology to perform reliable tunneling spectroscopy in electrochemical media. Sequential in situ tunneling spectra are recorded while the electrochemical potential of the electrode is scanned. Spectroscopic data are presented as conductance maps or conductograms that show the in situ electronic structure of an electrode surface while it undergoes an electrochemical reaction. The conductance map or conductogram represents the redox fingerprint of an electrode/liquid interface in a specific medium and can serve to predict its electrochemical behavior in a quantitative energy scale. The methodology is validated studying the reversible oxidation and passivity of an iron electrode in borate buffer, and we describe the main quantitative information that can be extracted concerning the semiconducting properties of the Fe passive film. This methodology is useful to study heterogeneous catalysis, electrochemical sensing and bioelectronic systems.

Electrochemistry↗

PubMed2006

Thermodynamic and structural study of the main phospholipid components comprising the mitochondrial inner membrane.

Cardiolipin (CL) is a phospholipid found in the energy-transducing membranes of bacteria and mitochondria and it is thought to be involved in relevant biological processes as apoptosis. In this work, the mixing properties of CL and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocoline (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) at the air-water interface, have been examined using the thermodynamic framework analysis of compression isotherms. Accordingly, the values of the Gibbs energy of mixing, the more stable monolayers assayed were: POPC:CL (0.6:0.4, mol:mol) and POPE:CL (0.8:0.2, mol:mol). The results reflect that attractive forces are the greatest contributors to the total interaction in these compositions. Supported planar bilayers (SPBs) with such compositions were examined using atomic force microscopy (AFM) at different temperatures. With the POPC:CL mixture, rounded and featureless SPBs were obtained at 4 degrees C and 24 degrees C. In contrast, the extension of the POPE:CL mixture revealed the existence of different lipid domains at 24 degrees C and 37 degrees C. Three lipid domains coexisted which can be distinguished by measuring the step height difference between the uncovered mica and the bilayer. While the low and intermediate domains were temperature dependent, the high domain was composition dependent. When cytochrome c (cyt c) was injected into the fluid cell, the protein showed a preferential adsorption onto the high domain of the POPC:CL. These results suggest that the high domain is mainly formed by CL.

Cardiolipins↗

PubMed2006

Titration force microscopy on supported lipid bilayers.

The use of chemically modified atomic force microscopy (AFM) probes allows us to measure the surface charges of supported planar lipid bilayers with high sensitivity through the force spectroscopy operation mode. By controlling the chemistry of the tip, we can perform a classical analytical chemistry titration where the titration agent is a weak acid (attached to the AFM tip) with the particularity of being performed in surface rather than in solution and, especially, at the nanometric scale. Thus, the AFM tip acts as a real "nanosensor". The approaching curves of the force plots reveal that electrostatic interactions between the tip and the supported membrane play a key role. Besides, the plot of the adhesion force (measured from the retracting curve of the force plots) versus pH displays a nonsigmoidal shape with a peak in the adhesion force attributed to high-energy hydrogen bonds. One of these peaks corresponds to the pKa of the surface under study and the other to the pKa of the titrating probe attached to the tip.

Dimyristoylphosphatidylcholine↗

PubMed2005

Proteoglycan mechanics studied by single-molecule force spectroscopy of allotypic cell adhesion glycans.

Early Metazoans had to evolve the first cell adhesion system addressed to maintaining stable interactions between cells constituting different individuals. As the oldest extant multicellular animals, sponges are good candidates to have remnants of the molecules responsible for that crucial innovation. Sponge cells associate in a species-specific process through multivalent calcium-dependent interactions of carbohydrate structures on an extracellular membrane-bound proteoglycan termed aggregation factor. Single-molecule force spectroscopy studies of the mechanics of aggregation factor self-binding indicate the existence of intermolecular carbohydrate adhesion domains. A 200-kDa aggregation factor glycan (g200) involved in cell adhesion exhibits interindividual differences in size and epitope content which suggest the existence of allelic variants. We have purified two of these g200 distinct forms from two individuals of the same sponge species. Comparison of allotypic versus isotypic g200 binding forces reveals significant differences. Surface plasmon resonance measurements show that g200 self-adhesion is much stronger than its binding to other unrelated glycans such as chondroitin sulfate. This adhesive specificity through multiple carbohydrate binding domains is a type of cooperative interaction that can contribute to explain some functions of modular proteoglycans in general. From our results it can be deduced that the binding strength/surface area between two aggregation factor molecules is comparable with that of focal contacts in vertebrate cells, indicating that strong carbohydrate-based cell adhesions evolved at the very start of Metazoan history.

Animals↗

PubMed2005

Nanomechanics of silicon surfaces with atomic force microscopy: an insight to the first stages of plastic deformation.

The use of stiff cantilevers with diamond tips allows us to perform nanoindentations on hard covalent materials such as silicon with atomic force microscopy. Thanks to the high sensitivity in the force measurements together with the high resolution upon imaging the surface, we can study nanomechanical properties. At this scale, the surface deforms, following a simple non-Hertzian spring model. The plastic onset can be assessed from a discontinuity in the force-distance curves. Hardness measurements with penetration depths as small as 1 nm yield H= approximately 25 GPa, thus showing a drastic increase with penetration depths below 5 nm.

Computer Simulation↗

PubMed2005

Effect of temperature on the nanomechanics of lipid bilayers studied by force spectroscopy.

The effect of temperature on the nanomechanical response of supported lipid bilayers has been studied by force spectroscopy with atomic force microscopy. We have experimentally proved that the force needed to puncture the lipid bilayer (Fy) is temperature dependent. The quantitative measurement of the evolution of Fy with temperature has been related to the structural changes that the surface undergoes as observed through atomic force microscopy images. These studies were carried out with three different phosphatidylcholine bilayers with different main phase transition temperature (TM), namely, 1,2-dimyristoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, and 2-dilauroyl-sn-glycero-3-phosphocholine. The solid-like phase shows a much higher Fy than the liquid-like phase, which also exhibits a jump in the force curve. Within the solid-like phase, Fy decreases as temperature is increased and suddenly drops as it approaches TM. Interestingly, a "well" in the Fy versus temperature plot occurs around TM, thus proving an "anomalous mechanical softening" around TM. Such mechanical softening has been predicted by experimental techniques and also by molecular dynamics simulations and interpreted in terms of water ordering around the phospholipid headgroups. Ion binding has been demonstrated to increase Fy, and its influence on both solid and liquid phases has also been discussed.

1,2-Dipalmitoylphosphatidylcholine↗

PubMed2005

Electric field induced electron transfer at the adsorbate-surface interface. Effect of the type of metal surface.

The ab initio two-state model for electron transfer induced by an external electric field has been applied to the chloride oxidation on Cu, Rh, Pd, Ag, Pt and Au (001) surface models. The two electronic states involved in the model represent physical situations where the electron transferred from the chloride anion to the metal surface lies either on the halide or on the metal substrate. The model assumes that electron transfer takes place when these two states become degenerate and this is achieved by applying an external electric field. Two different situations representing either ultrahigh vacuum or electrochemical conditions have been considered. For the former the present study shows that electric field necessary to achieve degeneracy of the two electronic states is directly related to the metal surface work function whereas for the latter, it is found to be rather insensitive to the metal surface.

Algorithms↗

PubMed2005

Study of frictional properties of a phospholipid bilayer in a liquid environment with lateral force microscopy as a function of NaCl concentration.

Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules.

Dimyristoylphosphatidylcholine↗

PubMed2005

Effect of ion-binding and chemical phospholipid structure on the nanomechanics of lipid bilayers studied by force spectroscopy.

The nanomechanical response of supported lipid bilayers has been studied by force spectroscopy with atomic force microscopy. We have experimentally proved that the amount of ions present in the measuring system has a strong effect on the force needed to puncture a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer with an atomic force microscope tip, thus highlighting the role that monovalent cations (so far underestimated, e.g., Na(+)) play upon membrane stability. The increase in the yield threshold force has been related to the increase in lateral interactions (higher phospholipid-phospholipid interaction, decrease in area per lipid) promoted by ions bound into the membrane. The same tendency has also been observed for other phosphatidylcholine bilayers, namely, 2-dilauroyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, and 1,2-dioleoyl-sn-3-phosphocholine, and also for phosphatidylethanolamine bilayers such as 1-palmitoyl-2-oleoyl-sn-3-phosphoethanolamine. Finally, this effect has been also tested on a natural lipid bilayer (Escherichia coli lipid extract), showing the same overall tendency. The kinetics of the process has also been studied, together with the role of water upon membrane stability and its effect on membrane nanomechanics. Finally, the effect of the chemical structure of the phospholipid molecule on the nanomechanical response of the membrane has also been discussed.

1,2-Dipalmitoylphosphatidylcholine↗

PubMed2005

Fine structure study of Abeta1-42 fibrillogenesis with atomic force microscopy.

One of the hallmarks of Alzheimer's disease is the self-aggregation of the amyloid beta peptide (Abeta) in extracellular amyloid fibrils. Among the different forms of Abeta, the 42-residue fragment (Abeta1-42) readily self-associates and forms nucleation centers from where fibrils can quickly grow. The strong tendency of Abeta1-42 to aggregate is one of the reasons for the scarcity of data on its fibril formation process. We have used atomic force microscopy (AFM) to visualize in liquid environment the fibrillogenesis of synthetic Abeta1-42 on hydrophilic and hydrophobic surfaces. The results presented provide nanometric resolution of the main structures characteristic of the several steps from monomeric Abeta1-42 to mature fibrils in vitro. Oligomeric globular aggregates of Abeta1-42 precede the appearance of protofibrils, the first fibrillar species, although we have not obtained direct evidence of oligomer-protofibril interconversion. The protofibril dimensions deduced from our AFM images are consistent with a model that postulates the stacking of the peptide in a hairpin conformation perpendicular to the long axis of the protofibril, forming single beta-sheets ribbon-shaped. The most abundant form of Abeta1-42 fibril exhibits a nodular structure with a ~100-nm periodicity. This length is very similar 1) to the length of protofibril bundles that are the dominant feature at earlier stages in the aggregation process, 2) to the period of helical structures that have been observed in the core of fibrils, and 3) to the distance between regularly spaced, structurally weak fibril points. Taken together, these data are consistent with the existence of a ~100-nm long basic protofibril unit that is a key fibril building block.

Amyloid↗

PubMed2005

Surface thermodynamics study of monolayers formed with heteroacid phospholipids of biological interest.

The interaction of 1-palmitoy-2-oleoyl-sn-glycero-3-phosphocoline (POPC) and 1-palmitoy-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), two of the major components in biological membranes, were investigated using the monolayer technique at the air-water interface. The pressure-area isotherms indicate that both phospholipids are miscible through all range of compositions. POPE-POPC form stable mixtures, with a minimum for the Gibbs energy of mixing at X(POPC) = 0.4. A virial equation of state was fitted to the experimental values. Positive values found for the second virial coefficient indicate repulsion between POPC and POPE. The interaction parameter was evaluated which indicated that a corresponding decrease in the repulsion occurs when POPC molar fraction is low. This effect suggests the existence of hydrogen bonds between POPE and the water beneath the interface.

Air↗

PubMed2005

Surface thermodynamic properties of monolayers versus reconstitution of a membrane protein in solid-supported bilayers.

Atomic force microscopy (AFM) was used to study the influence of a membrane protein, lactose permease of Escherichia coli (LacY), on the surface spreading behavior and the features of self-assembled phospholipids bilayers on mica. The miscibility of phospholipids used, 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), was investigated by surface pressure area isotherm measurements at the air-water interface. A composition with an equimolar proportion of POPC and DMPC was used to form the liposomes. Surface layers formed with DMPC:POPC (0.5:0.5, mol/mol) or LacY reconstituted in proteoliposomes with the same phospholipid composition were imaged by using AFM. When lactose permease was reconstituted in DMPC:POPC (0.5:0.5, mol/mol), self-assembled structures that remained firmly adsorbed onto the mica surface were observed. These sheets had an irregular shape and their upper layer was more corrugated than that obtained for the phospholipid matrix.

Adsorption↗

PubMed2004

Preparation of reliable probes for electrochemical tunneling spectroscopy.

We present a new procedure to prepare Pt/Ir probes for electrochemical scanning tunneling microscopy (STM) and spectroscopy applications. We detail the experimental setup and the improvements over previous methods. The probes have been used successfully for measurements of tunneling spectroscopy under electrochemical control, which requires scanning the potential of the tip at high velocity.

Journal Article↗

PubMed2004

Interaction of water with self-assembled monolayers of alkylsilanes on mica.

The interaction of water with self-assembled alkylsilane monolayers on mica substrates has been studied using an atomic force microscope operated in contact, noncontact, and electrical polarization modes. Complete monolayer films were found to be effective in blocking water adsorption. On partially covered surfaces water was found to produce large changes in the conductivity and surface potential of the exposed mica regions. It was also found that water could penetrate films near defects and at island edges.

Journal Article↗

PubMed2004

Alkali halide nanocrystal growth and etching studied by AFM and modeled by MD simulations.

NaCl hillocks have been grown on the NaCl(100) monocrystalline surface by simply making the tip of an atomic force microscope cantilever interact with the surface. A quantitative discussion about the hillock dissolution process as well as physical stability of these ionic surfaces has been made. Molecular dynamics simulations helped us to interpret the experimental data. An explanation for the hillock formation and dissolution phenomena is also discussed.

Journal Article↗

PubMed2002

Supramolecular properties of the proline-rich gamma-Zein N-terminal domain.

Zeins are maize storages proteins that accumulate inside large vesicles called protein bodies. gamma-Zein lines the inner face of the protein body membrane, and its N-terminal proline-rich repetitive domain with the sequence (VHLPPP)(8) appears to be necessary for the accumulation of the protein within the organelle. Synthetic (VHLPPP)(8) adopts an amphipathic polyproline II conformation. In a preliminary recent work we used atomic force microscopy to study the surface organization of the octamer and transmission electron microscopy to visualize aggregates of the peptide from aqueous solution. We previously envisioned two self-assembly models (i.e., the geometric and the micellar) that take into account the observed features. In the present work we studied in detail the self-assembly of the peptide in solution and found that the peptide is able to form cylindrical micelles. Fibrils formed on graphite are generated by assembly of solution micelles. Based on the results of these studies, we focused exclusively on the micellar model. To our knowledge we have characterized for the first time supramolecular aggregates of polyproline structures other than collagen. The spontaneous arrangement of (VHLPPP)(8) suggests a role for the N-terminal domain of gamma-zein in the process of the whole protein deposition in protein bodies.

Biophysical Phenomena↗