PubMed Health⌕ Search

Biomedical subjects

Feng Deng

Publications and source records attributed to Feng Deng.

At least 19 recordsLinked to original sources

Synthesis and characterization of a new layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O with extra-large 16-rings.

A new two-dimensional-layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O (denoted as AlPO-CJ20) with an Al/P ratio of 4:5 has been synthesized solvothermally by using 2-amino-2-methyl-1-propanol as the structure-directing agent. Its structure was determined by single-crystal X-ray diffraction analysis and further characterized by solid-state NMR techniques, including 27Al, 19F --> 27Al cross-polarization, and 31P magic angle spinning NMR. The alternation of Al-centered tetrahedra (AlO4 and AlO3F) and PO3(=O) tetrahedra gives rise to a new type of 4.6.16-net sheet. The inorganic sheets are stacked in an ABAB sequence along the [010] direction and further held together through strong H bonds between protonated template molecules and P=O groups in the inorganic layers. Except for Mu-4, AlPO-CJ20 is the second layered aluminophosphate with an Al/P ratio of 4:5, and it contains the largest pore opening of 16-rings in the known layered aluminophosphates. Furthermore, the coordination of Al and P of fluoroaluminophosphates is summarized. Crystal data: (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O, monoclinic, C2/c (No. 15), a = 32.678(7) A, b = 12.956(3) A, c = 21.045(4) A, beta = 115.17(3) degrees, V = 8064(3) A3, Z = 8, R1 = 0.0837 [I > 2sigma(I)], and wR2 = 0.2428 (all data).

Journal Article↗

Towards uniform enhancement in solid-state cross polarization magic [corrected] angle spinning NMR: a scheme incorporating cross polarization with rotational resonance.

A recently proposed experimental scheme for achieving uniform cross polarization enhancement of low-gamma nuclear species in solids under magic angle spinning, termed quantitative cross polarization (QUCP) [Hou et al., Chem. Phys. Lett. 421, 356 (2006)], is described, supported with comprehensive theoretical analysis, numerical simulation, and experimental investigation with both uniformly labeled and naturally abundant solids. This method combines cross polarization with dipolar-assisted rotational resonance (DARR) [Takegoshi et al., Chem. Phys. Lett. 344, 631 (2001)] broadband homonuclear recoupling technique to achieve quantitative CP spectra under fast magic angle spinning. In addition to the correct and systematical interpretation on the phenomenon we reported in the previous Letter, a number of general guidelines for performing QUCP experiments are presented in this work. It is firmly established that while the enhancement factor in QUCP depends on the CP contact time, uniform enhancement can nevertheless be realized for all types of carbon group. For natural abundance samples, the polarization transfer rate is generally slower than that in labeled samples, but quasi-equilibrium among dilute spins in the mixing period can always be reached and uniform enhancement can be achieved albeit the DARR irradiation time needed can be much longer. For labeled samples, the time gain of QUCP experiment is almost the same as that of conventional CP. For natural abundance samples, it is generally much better than single-pulse experiment. Various representative systems, including uniformly (13)C-labeled DL-alanine and (13)C, (15)N labeled L-tyrosine, as well as naturally abundant alanine, tyrosine, and monoethyl fumarate, are used to verify the validity of our theoretical analysis and numerical simulation and to demonstrate the utility and advantages of the present approach.

Journal Article↗

Studies on a new carrier of trimethylsilyl-modified mesoporous material for controlled drug delivery.

To better control drug delivery rate, a simple and effective approach has been developed for controlled drug delivery carrier system through one-step surface modification of the ibuprofen-impregnated silica MCM-41 with 1, 1, 1, 3, 3, 3-hexamethyldisilazane (HMDS). The 29Si MAS NMR characterization demonstrated that different contents of trimethylsilyl (TMS) groups were successfully grafted onto the samples modified with different silylation times. The results obtained from in vitro tests exhibited that the introduction of TMS groups greatly retarded the ibuprofen release rate. Even after in vitro test for 48 h, only 75% of the impregnated ibuprofen could be released from the modified sample with TMS groups content of 14.5% (related to the total silicon atoms). However, the release of ibuprofen could be completed just after about 1 h from the pure silica MCM-41 under the same release conditions. Furthermore, the release rate of ibuprofen could be well modulated by changing the grafted content of TMS groups, and was found to decrease with increasing grafted amount of TMS groups.

Biological Availability↗

Acidity of mesoporous MoO(x)/ZrO2 and WO(x)/ZrO2 materials: a combined solid-state NMR and theoretical calculation study.

The acidity of mesoporous MoO(x)/ZrO2 and WO(x)/ZrO2 materials was studied in detail by multinuclear solid-state NMR techniques as well as DFT quantum chemical calculations. The 1H MAS NMR experiments clearly revealed the presence of two different types of strong Brønsted acid sites on both MoO(x)/ZrO2 and WO(x)/ZrO2 mesoporous materials, which were able to prontonate adsorbed pyrine-d5 (resulting in 1H NMR signals at chemical shifts in the range 16-19 ppm) as well as adsorbed trimethylphosphine (giving rise to 31P NMR signal at ca. 0 ppm). The 13C NMR of adsorbed 2-(13)C-acetone indicated that the average Brønsted acid strength of the two mesoporous materials was stronger than that of zeolite HZSM-5 but still weaker than that of 100% H2SO4, which was in good agreement with theoretical predictions. The quantum chemical calculations revealed the detailed structures of the two distinct types of Brønsted acid sites formed on the mesoporous MoO(x)/ZrO2 and WO(x)/ZrO2. The existence of both monomer and oligomer Mo (or W) species containing a Mo-OH-Zr (or W-OH-Zr) bridging OH group was confirmed with the former having an acid strength close to zeolite HZSM-5, with the latter having an acid strength similar to sulfated zirconia. On the basis of our NMR experimental and theoretical calculation results, a possible mechanism was proposed for the formation of acid sites on these mesoporous materials.

Journal Article↗

Reaction of layered sodium disilicate SKS-6 with calcium chloride solution as revealed by solid state NMR spectroscopy: exploring the calcium ion extracting mechanism of SKS-6.

Solid-state 1H, 29Si NMR and 23Na MQMAS NMR spectroscopy combined with X-ray powder diffraction (XRD) technique was used to study the reaction between layered sodium disilicate SKS-6 and calcium chloride solution with different concentrations. Based on the experimental results the calcium ion extracting mechanism of SKS-6 was demonstrated to be via ion replacement, during which calcium ions replace sodium ions and combine with the non-bridging oxygen in SKS-6 for charge compensation, and simultaneously sodium ions leave the interlayer. This ion-replacement process was greatly influenced by the substitution of sodium ions by protons as well as the calcium ions concentration. Increasing calcium ions concentration favors the replacement of sodium ions by calcium ions, but prevents sodium ions from being substituted by protons.

Journal Article↗

Fabrication of bismuth subcarbonate nanotube arrays from bismuth citrate.

Bismuth subcarbonate ((BiO)2CO3) nanotubes with uniform diameters of about 3-5 nm were fabricated from bismuth citrate; these nanotubes exhibit antibacterial properties against Helicobacter pylori (50% inhibition at 10 microg mL(-1)), a bacterium causing peptic ulcers and gastritis.

Anti-Bacterial Agents↗

Acid sites and oxidation center in molybdena supported on tin oxide as studied by solid-state NMR spectroscopy and theoretical calculation.

Solid-state NMR spectroscopy and density functional theory (DFT) calculations were employed to study the structure and properties, especially the solid acidity, of molybdenum oxide supported on tin oxide. As demonstrated by solid-state NMR experiments, Mo species are mainly dispersed on the surface of SnO(2) support rather than significantly dissolved into the SnO(2) structure and Brønsted as well as Lewis acid sites are present on the MoO(3)/SnO(2) catalyst. Acid strength of the supported metal oxide is stronger than those of zeolites, e.g., HY and HZSM-5, though the concentration of acid sites is relatively lower. The DFT calculated (13)C chemical shift for acetone adsorbed on MoO(3)/SnO(2) is in good agreement with the experimental value, which confirms our proposed structure of -Mo-(OH)-Sn- for the Brønsted acid site. Reducibility of the supported metal oxide is also demonstrated by solid-state NMR experiments and an active oxidation center of this catalyst is proposed as well.

Acids↗

Arrangement, conformation, and mobility of surfactant molecules intercalated in montmorillonite prepared at different pillaring reagent concentrations as studied by solid-state NMR spectroscopy.

The arrangement, conformation, and mobility of dodecyltrimethylammonium cations (DDTMA+) intercalated in montmorillonite prepared with different pillaring reagent concentrations have been studied by 13C relaxation time measurement, cross-polarization dynamics, and two-dimensional proton wide-line separation (2D WISE) spectroscopy, as well as X-ray powder diffraction (XRD). We demonstrate that the arrangement of DDTMA+ and the mobility of various groups are different, depending on the pillaring concentration, but the conformations of alkyl chains are similar. XRD experiments illustrate that at three different pillaring concentrations (DDmt0.2, DDmt0.5, and DDmt1.0), the organic cations adopt a lateral-monolayer, lateral-monolayer, and pseudotrilayer arrangement, respectively. 13C MAS NMR reveals that the alkyl chains at the three concentrations uniformly display a large amount of mixed trans and gauch conformation (disordered) and a small amount of trans conformation (ordered). 13C spin-lattice relaxation time and 1H-13C cross-polarization dynamics measurement, along with 2D WISE NMR experiments, indicate that the mobility is much different for various groups at a given concentration and for a given group at different concentrations. At each concentration N-methyl unusually possesses the highest mobility, even exceeding that of the terminal methyl; at different concentrations the N-methyl and terminal methyl in DDmt1.0 exhibit the highest mobility compared with the other two samples.

Journal Article↗

Solid-state NMR spectroscopy of anionic framework aluminophosphates: a new method to determine the al/p ratio.

A series of anionic framework aluminophosphates, with different Al/P ratios, have been investigated by various solid-state NMR techniques, including 27Al, 31P magic angle spinning (MAS), 27Al-->31P cross polarization (CP), 27Al{31P} rotational echo double resonance (REDOR), and 31P{27Al} transfer of population double resonance (TRAPDOR). Different Al coordinations (AlO4b, AlO5b, and AlO6b) and P coordinations (PO4b, PO3bOt, PO2bO2t, and PObO3t), where b represents bridging oxygens and t represents terminal oxygens, can be unambiguously determined based on the solid-state NMR spectroscopy. Furthermore, a new method to determine the Al/P ratio of open-framework aluminophosphates has been established, which is useful for the understanding of unknown aluminophosphate structures.

Journal Article↗

High-resolution magic-angle spinning (13)C spectroscopy of brain tissue at natural abundance.

High-resolution magic-angle spinning (MAS) (1)H and (13)C magnetic resonance spectroscopy (MRS) has recently been applied to study the metabolism in intact biological tissue samples. Because of the low natural abundance and the low gyromagnetic ratio of the (13)C nuclei, signal enhancement techniques such as cross-polarization (CP) and distortionless enhancement by polarization transfer (DEPT) are often employed in MAS (13)C MRS to improve the detection sensitivity. In this study, several sensitivity enhancement techniques commonly used in liquid- and solid-state NMR, including CP, DEPT and nuclear Overhauser enhancement (NOE), were combined with MAS to acquire high-resolution (13)C spectra on intact rat brain tissue at natural abundance, and were compared for their performances. The results showed that different signal enhancement techniques are sensitive to different classes of molecules/metabolites, depending on their molecular weights and mobility. DEPT was found to enhance the signals of low-molecular weight metabolites exclusively, while the signals of lipids, which often are associated with membranes and have relatively lower mobility, were highly sensitive to CP enhancement.

Animals↗

Combined DFT theoretical calculation and solid-state NMR studies of Al substitution and acid sites in zeolite MCM-22.

The distributions of Brönsted acidic protons and their acid strengths in zeolite H-MCM-22 have been characterized by density functional theory (DFT) calculations as well as magic angle spinning (MAS) NMR experiments. The embedded scheme (ONIOM) that combines the quantum mechanical (QM) description of active sites and semiempirical AM1 treatment of the neighboring environment was applied to predict the aluminum substitution mechanism and proton affinity (PA), as well as adsorption behaviors of acetone and trimethylphosphine oxide (TMPO) onto the zeolite. Our theoretical results indicate that the Al substitution takes place in the order of Al1-OH-Si2 > Al8-OH-Si8 > Al5-OH-Si7. The DFT theoretical and NMR experimental results suggest that the acid strength of the three Brönsted acid sites in H-MCM-22 zeolite is slightly lower than that of H-ZSM-5 zeolite and the accessible Brönsted acidic protons most likely reside in both the supercages (at the Al8-OH-Si8 and Al1-OH-Si2 sites) and external surface pocket (at the Al8-OH-Si8 site) rather than in the sinusoidal channels (Al5-OH-Si7), with the Al1-OH-Si2 site having the strongest acid strength (as probed by TMPO). This may partially explain the special selectivity of acid-catalyzed reactions occurring inside the channels of H-MCM-22 zeolite.

Journal Article↗

Location, acid strength, and mobility of the acidic protons in Keggin 12-H3PW12O40: a combined solid-state NMR spectroscopy and DFT quantum chemical calculation study.

Solid-state 13C NMR experiments and quantum chemical Density Functional Theory (DFT) calculations of acetone adsorption were used to study the location of protons in anhydrous 12-tungstophosphoric acid (HPW), the mobility of the isolated and hydrated acidic protons, and the acid strength heterogeneity of the anhydrous hydroxyl groups. This study presents the first direct NMR experimental evidence that there are two types of isolated protons with different acid strengths in the anhydrous Keggin HPW. Rotational Echo DOuble Resonance (REDOR) NMR experiments combined with quantum chemical DFT calculations demonstrated that acidic protons in anhydrous HPW are localized on both bridging (Oc) and terminal (Od) atoms of the Keggin unit. The CP/MAS NMR experiments revealed that the isolated acidic protons are immobile, but hydrated acidic protons are highly mobile at room temperature. The isotropic chemical shift of the adsorbed acetone suggested that the acid strength of the H(H2O)n+ species in partially hydrated HPW is comparable to that of a zeolite, while the acidity of an isolated proton is much stronger than that of a zeolite. Isolated protons on the bridging oxygen atoms of anhydrous HPW are nearly superacidic.

Journal Article↗

Brönsted and Lewis acidity of the BF3/gamma-Al2O3 alkylation catalyst as revealed by solid-state NMR spectroscopy and DFT quantum chemical calculations.

Multinuclear solid-state NMR techniques and DFT quantum chemical calculations were employed to investigate the detailed structure of acid sites on the BF3/gamma-Al2O3 alkylation catalyst. The NMR experiment results indicate that gaseous BF3 is able to react with the hydroxyl groups present on the surface of gamma-Al2O3, leading to the formation of new Brönsted and Lewis acid sites. The 1H/11B and 1H/27Al TRAPDOR (TRAnsfer of Population in DOuble Resonance) experiments suggest that the 3.7 ppm signal in 1H NMR spectra of the BF3/gamma-Al2O3 catalyst is due to a bridging B-OH-Al group that acts as a Brönsted acid site of the catalyst. On the other hand, a Lewis acid site on the surface of the catalysts, as revealed by 31P MAS and 31P/27Al TRAPDOR NMR of adsorbed trimethylphosphine, is associated with three-coordinate -OBF2 species. 13C NMR of adsorbed 2-13C-acetone indicates that the Brönsted acid strength of the catalyst is slightly stronger than that of zeolite HZSM-5 but still weaker than that of 100% H2SO4, which is in good agreement with theoretical prediction. In addition, DFT calculations also reveal the detailed structure of various acid sites formed on the BF3/gamma-Al2O3 catalyst and the interaction of probe molecules with these sites.

Journal Article↗

Synthesis, crystal structure, and solid-state NMR spectroscopy of a new open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O.

A new three-dimensional open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4)).H(2)O (denoted AlPO-CJ19) with an Al/P ratio of 4/5 has been synthesized, using pyridine as the solvent and 2-aminopyridine as the structure-directing agent, under solvothermal conditions. The structure was determined by single-crystal X-ray diffraction and further characterized by solid-state NMR techniques. The alternation of the Al-centered polyhedra (including AlO(4), AlO(5), and AlO(6)) and the P-centered tetrahedra (including PO(4) and PO(3)OH) results in an interrupted open-framework structure with an eight-membered ring channel along the [100] direction. This is the first aluminophosphate containing three kinds of Al coordinations (AlO(4), AlO(5), and AlO(6)) with all oxygen vertexes connected to framework P atoms. (27)Al MAS NMR, (31)P MAS NMR, and (1)H --> (31)P CPMAS NMR characterizations show that the solid-state NMR techniques are an effective complement to XRD analysis for structure elucidation. Furthermore, all of the possible coordinations of Al and P in the aluminophosphates with an Al/P ratio of 4/5 are summarized. Crystal data: (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O, monoclinic P2(1) (No. 4), a = 5.0568(3) A, b = 21.6211(18) A, c = 8.1724(4) A, beta = 91.361(4) degrees , V = 893.27(10) A(3), Z = 2, R(1) = 0.0456 (I > 2 sigma(I)), and wR(2) = 0.1051 (all data).

Journal Article↗

Characterization of organic phases in the interlayer of montmorillonite using FTIR and 13C NMR.

The molecular conformation and mobility of the intercalated surfactant molecules cetyltrimethylammonium bromide (CTMAB) have been studied using Fourier transform infrared spectroscopy (FTIR) and high-resolution single-pulse 13C magic angle spinning nuclear magnetic resonance (13C SP MAS NMR) spectroscopy. The conformation and mobility of alkyl chains were found to be a function of the surfactant concentration. The splitting of the methylene scissoring mode at 1473-1463 cm(-1) and the rocking mode at 730-720 cm(-1) in FTIR are considered to be diagnostic of the packing density increase of the intercalated surfactants within the clay gallery. Compared with the 13C SP MAS NMR spectrum of CTMAB in the bulk state, 1-3 ppm upfield chemical shifts for end-methyl (deltaC16) and methylene (deltaC15, deltaC2-14) of the intercalated surfactant molecules in the hybrids indicate a freer conformational situation. For these hybrids, the conformational freedom decreases with increased of surfactant concentration. In addition, on approximately 2 ppm downfield shift for the C1 carbon atom in the hybrids with higher surfactant content suggests a special local environment. This study demonstrates the different mobility of carbon atoms in the intercalated alkyl chain.

Journal Article↗

Solvent-free preparation of nanosized sulfated zirconia with Brønsted acidic sites from a simple calcination.

Nanosized sulfated zirconia with Brønsted acidic sites has been prepared by a simple calcination in the absence of any solvent. XRD patterns reveal that the sulfated zirconia mainly consists of tetragonal crystalline zirconia with average size of about 7 nm, which is further confirmed by TEM images. N2 adsorption data show that the nanosized sulfated zirconia has high surface area (165-193 m2/g) and exhibits uniform pore distribution aggregated by zirconia nanoparticles. IR spectra of samples show that the sulfur species in the nanosized sulfated zirconia is a little different from that in conventional sulfated zirconia. Furthermore, IR spectra of adsorbed pyridine indicate that the nanosized sulfated zirconia contains relatively more Brønsted acidic sites than conventional sulfated zirconia. Catalytic tests show that the nanosized sulfated zirconia exhibits much higher activity than conventional sulfated zirconia in catalytic esterification of cyclohexanol with acetic acid.

Journal Article↗