Biomedical subjects

Feng-Huei Lin

Publications and source records attributed to Feng-Huei Lin.

At least 19 recordsLinked to original sources

PubMed2007

Cytotoxicity of partial-stabilized cement.

Partial-stabilized cement (PSC) is a kind of modified calcium silicate cement used for root-end surgery. Minor transition metal elements Co, Cr, and Zn were added for enhancing the setting property of to PSC. In our previous study, minor transition metal additions greatly improved the setting property of PSC. However, the concern of metal toxicity was raised, as the material would be used in the human body. In this study, we evaluated the cytotoxicity of PSC in comparison with mineral trioxide aggregate (MTA), which is one of the commercialized materials used for dental root-end filling. Primary osteoblast cell was used as the target cell. Cell proliferation, cytotoxicity, viability, function, and senescence were analyzed. The cytotoxicity of the PSC-Zn group (PSC with Zn addition) was similar to that of MTA. PSC-Zn is not only nontoxic at the cellular level but also has adequate mechanical property, which makes it a potential root-end filling material for apical surgery.

Animals↗

PubMed2006

Gelatin-tricalcium phosphate membranes immobilized with NGF, BDNF, or IGF-1 for peripheral nerve repair: an in vitro and in vivo study.

In the present study, NGF, BNDF from the neurotrophin family and IGF-1 were covalently immobilized on gelatin-tricalcium phosphate (GTG) membrane using carbodiimide. We investigated the effects of these growth factors released from the GTG composites on cultured PC12 cells and sciatic nerve regeneration across a 10-mm-long gap in rats. In PC12 cell culture, the total protein content and MTT assay indicated more cell attachment on the composites modified with growth factors. The IGF-1 group showed a higher survival promotion effect on PC12 cells than did BDNF and NGF groups. On the other hand, NGF released from the composite showed the highest level of neuritogenesis for PC12 cells in neurite outgrowth assay. In the animal study, the GTG conduits modified with various growth factors were well tolerated by the host tissue. In the regenerated nerves, the number of the axons per unit area of the BDNF group was significantly higher than that of NGF and GTG groups but similar to that of IGF-1 group. However, the average axon size was the largest in NGF group. This result was in concordance with the neurite outgrowth assay in which NGF showed the highest neuritogenic potential. In the assessment of motor and sensory recovery after nerve repair, conduits modified with various neurotrophic factors showed a more favorable outcome in compound muscle action potential. The BDNF group had a better gastrocnemic muscle weight ratio than blank GTG repair. Nevertheless, the different effects of GTG conduits modified with various neurotrophic factors on functional recovery cannot be simply illustrated in the sciatic function index.

Animals↗

PubMed2006

Coculture of endothelial and smooth muscle cells on a collagen membrane in the development of a small-diameter vascular graft.

In this study, we have evaluated the feasibility of developing a biodegradable collagenous small diameter vascular graft of 2mm diameter and 1cm length. In brief, bi-layer type I collagen membrane was fabricated under vacuum suction and lyophilization methods. The smooth muscle cells were inoculated into the lower side of the porous membrane, while endothelial cells were seeded onto upper smooth side of the membrane. After cultured for 7 days, the vascular substitute was either harvested for in vitro examination or in vivo implanted in the subcutaneous layer for biocompatibility test. The tubular vascular prosthesis was then used as a temporary absorbable guide that served as an in vivo vascular graft to promote the complete regeneration of rat inferior vena cava. After implantation for 12 weeks, a thin continuous layer of endothelial cells and smooth muscle cells were lined with the vascular lumen and tunic media, respectively. Histology results showed that there were no signs of significant thrombogeneity and intima hyperplasia. This tissue engineered vascular substitute not only had enough tensile strength and good biocompatibility, but also advanced vascular regeneration. In the future, we suggest that this biodegradable vascular substitute will provide with the possibility in application on small diameter prosthetic grafts in artificial blood vessels.

Animals↗

PubMed2006

Skin basement membrane and extracellular matrix proteins characterization and quantification by real time RT-PCR.

Three-dimensional gelatin-chondroitin 6 sulphate-hyanuronic acid (gelatin-C6S-HA) biomatrices were used as the scaffold to investigate the phenotypic and molecular expression of basement membrane (BM) and extracellular matrix (ECM) proteins in vitro. The cells were cultured in three different culture conditions: keratinocytes (K) monoculture, or dermal fibroblasts (FB) monoculture, or organotypic keratinocytes and dermal fibroblasts (K&FB) coculture model. The deposition of BM proteins and ECM proteins secreted by these two kinds of cells was quantitatively characterized by real time RT-PCR and examined by immunohistochemistry. The results showed that K expressed specific keratin and E-cadherin proteins, while type I collagen was secreted by FB. FB were shown to synthesize and deposit laminin 5, type IV collagen, and type VII collagen, whereas K dominantly produced integrin alpha 6 and integrin beta 4 as well as laminin 5. Interestingly, the integrin beta 4 was expressed neither in K monoculture nor in FB monoculture, but was seen in organotypic K&FB coculture model in the early culture stage. The histology studies revealed numerous features of epidermalization including a well organized basal layer of distinct cylindrical cells, granular and a horny layer, as well as complete BM formation. These results indicated that K and FB not only kept their phenotype when culturing on 3D scaffold, but also worked together to reconstruct dermal-epidermal basement membrane zone. In brief, our results directly provide the quantification in the expression of BM and ECM proteins by using real time RT-PCR in mRNA level and morphological appearance by immunostain in protein level.

Basement Membrane↗

PubMed2006

Modified montmorillonite as vector for gene delivery.

Currently, gene delivery systems can be divided into two parts: viral or non-viral vectors. In general, viral vectors have a higher efficiency on gene delivery. However, they may sometimes provoke mutagenesis and carcinogenesis once re-activating in human body. Lots of non-viral vectors have been developed that tried to solve the problems happened on viral vectors. Unfortunately, most of non-viral vectors showed relatively lower transfection rate. The aim of this study is to develop a non-viral vector for gene delivery system. Montmorillonite (MMT) is one of clay minerals that consist of hydrated aluminum with Si-O tetrahedrons on the bottom of the layer and Al-O(OH)2 octahedrons on the top. The inter-layer space is about 12 A. The room is not enough to accommodate DNA for gene delivery. In the study, the cationic hexadecyltrimethylammonium (HDTMA) will be intercalated into the interlayer of MMT as a layer expander to expand the layer space for DNA accommodation. The optimal condition for the preparation of DNA-HDTMA-MMT is as follows: 1 mg of 1.5CEC HDTMA-MMT was prepared under pH value of 10.7 and with soaking time for 2 h. The DNA molecules can be protected from nuclease degradation, which can be proven by the electrophoresis analysis. DNA was successfully transfected into the nucleus of human dermal fibroblast and expressed enhanced green fluorescent protein (EGFP) gene with green fluorescence emission. The HDTMA-MMT has a great potential as a vector for gene delivery in the future.

Aluminum↗

PubMed2006

An in vivo study of tricalcium phosphate and glutaraldehyde crosslinking gelatin conduits in peripheral nerve repair.

In order to modulate the mechanical properties of gelatin, we previously developed a biodegradable composite composed by tricalcium phosphate and glutaraldehyde crosslinking gelatin (GTG) feasible for surgical manipulation. In this study, we evaluated the in vivo applications of GTG conduit for peripheral nerve repair. The effect of sciatic nerve reconstruction was compared between resorbable permeable GTG conduits and durable impermeable silicone tubes. Traditional methods of assessing nerve recovery following peripheral nerve repair including histomorphometric and electrophysiologic features were conducted in our study. In addition, autotomy score and sciatic function index (SFI) in walking tract analysis were used as additional parameters for assessing the return of nerve function. Twenty-four weeks after sciatic nerve repair, the GTG conduits were harvested. Microscopically, regeneration of nerves was observed in the cross-section at the mid portion of all implanted GTG conduits. The cross-sectional area of regenerated nerve of the GTG group was significant larger than that of the silicone group. In the compound muscle action potentials (CMAP), the mean recovery index of CMAP amplitude was 0.24 +/- 0.02 for the silicone group, 0.41 +/- 0.07 for the GTG group. The mean SFI increased with time in the GTG group during the evaluation period until 24 weeks. Walking tract analysis showed a higher SFI score in the GTG group at both 12 and 24 weeks. The difference reached a significant level at 24 weeks. Thus, the histomorphometric, electrophysiologic, and functional assessments demonstrate that GTG can be a candidate for peripheral nerve repair.

Action Potentials↗

PubMed2006

TGF-beta1 immobilized tri-co-polymer for articular cartilage tissue engineering.

Tri-co-polymer with composition of gelatin, hyaluronic acid and chondroitin-6-sulfate has been used to mimic the cartilage extracellular matrix as scaffold for cartilage tissue engineering. In this study, we try to immobilize TGF-beta1 onto the surface of the tri-co-polymer sponge to suppress the undesired differentiation during the cartilage growth in vitro. The scaffold was synthesized with a pore size in a range of 300-500 microm. TGF-beta1 was immobilized on the surface of the tri-co-polymer scaffold with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as a crosslinking agent. Tri-co-polymer scaffolds with and without TGF-beta1 were seeded with porcine chondrocytes and cultured in a spinner flask for 2, 4, and 6 weeks. The chondrocytes were characterized by the methods of immunohistochemical staining with anti-type II collagen and anti-S-100 protein monoclonal antibody, and RT-PCR. After culturing for 4 weeks, chondrocytes showed positive in S-100 protein, Alcian blue, and type II collagen for the scaffold with TGF-beta1 immobilization. There is no observed type I and type X collagen expression in the scaffolds from the observation of RT-PCR. In addition, the scaffold without TGF-beta1 immobilization, type X collagen, can be detected after cultured for 2 weeks. Type I collagen was progressively expressed after 4 weeks. These results can conclude that TGF-beta1 immobilized scaffold can suppress chondrocytes toward prehypertrophic chondrocytes and osteolineage cells. The tri-co-polymer sponge with TGF-beta1 immobilization should have a great potential in cartilage tissue engineering in the future.

Animals↗

PubMed2006

The effect of self-designed bifunctional RGD-containing fusion protein on the behavior of human keratinocytes and dermal fibroblasts.

In this study, self-designed bifunctional RGD-containing fusion protein (BFP) was grafted on the petri dish to evaluate its cytotoxicity and attachment efficiency on primary cultured keratinocytes and dermal fibroblasts. Two lengths of the GRGDS sequences were separately fused to the N-terminus and C-terminus of the Trichoderma koningii cellobiohydrolase I gene cellulose-binding domain, to serve as linking molecule between the cell and the substrate. The grafting procedure was no more labor-intensive and could be done just in aqueous condition itself. The epidermal keratinocytes and dermal fibroblasts, harvested and separated from human foreskin, were cultured in serum-free keratinocyte culture medium and DMEM, respectively. The BFP was dissolved in double-deionized water, and was prepared at different concentrations. The BFP solution was subsequently added into the petri dish for grafting. MTT assay, total DNA measurement, and lactate dehydrogenase analysis were used to evaluate the cell viability, cell proliferation, and cytotoxicity. The immunochemical stain and SEM examination were chosen to make sure that the cultured cells still kept in phenotype. The results showed that the self-designed BFP was successfully coated on the petri dish to improve the cells' adhesion. The whole coating procedure was just done in aqueous solution without any organic solvent being involved. This method was much simpler than the traditional one, and there was no possibility to damage the immobilized biomolecules. From the results of the study, BFP could enhance attachment of keratinocytes and dermal fibroblasts without losing normal cell morphology and keep keratinocytes on the desired differentiation pathway. We believe that coating BFP on petri dish not only enhanced the keratinocyte attachment but also promoted keratinocytes proliferation. We suggest that the self-designed BFP has a great potential to apply on surface modification for the tissue-engineering scaffolds in the future.

Amino Acid Sequence↗

PubMed2006

The effect of gelatin-chondroitin sulfate-hyaluronic acid skin substitute on wound healing in SCID mice.

Tissue-engineered skin substitutes provided a feasibility to overcome the shortage of skin autograft by culturing keratinocytes and dermal fibroblasts in vitro. In this study, we applied bi-layer gelatin-chondrointin-6-sulfate-hyaluronic acid (gelatin-C6S-HA) biomatrices onto the severe combined immunodeficiency (SCID) mice to evaluate its effect on promoting wound healing. Human foreskin keratinocytes and dermal fibroblasts were cultured with reconstructed skin equivalent (rSE) for 7 days. The rSE was then grafted to the dorsum of SCID mice to evaluate its biocompatibility by histologic and immunohistochemistry analysis. The results showed that human epidermis were well-developed with the expression of differentiated markers and basement membrane-specific proteins at 4 weeks. After implantation, the percentages of skin graft take were satisfactory, while cell-seeded group was better than non-cell-seeded one. The basement membrane proteins including laminin, type IV collagen, type VII collagen, integrin alpha6, and integrin beta4 were all detected at the dermal-epidermal junction, which showed a continuous structure in the 4 weeks after grafting. This bi-layer gelatin-C6S-HA skin substitute not only has positive effect on promoting wound healing, but also has high rate of graft take. This rSE would have the potential to be applied on the extensively and deeply burned patients who suffer from severe skin defect in the near future.

Animals↗

PubMed2006

Biomimetic bilayered gelatin-chondroitin 6 sulfate-hyaluronic acid biopolymer as a scaffold for skin equivalent tissue engineering.

In order to develop an adequate scaffold for skin tissue engineering, a bilayered gelatin-chondroitin 6 sulfate-hyaluronic acid membrane with a different pore size on either side was prepared. A rete ridges-like topographic microporous structure, which provided the paracrine crosstalk in the epithelial-mesenchymal interactions, was formed. Chondroitin-6-sulfate and hyaluronic acid were incorporated within the gelatin membrane to mimic skin composition and create an appropriate microenvironment for cell proliferation, differentiation, and migration. In the study, the lower layer of the membrane (pore size: 150 microm) was seeded with dermal fibroblasts and acted as the feeder layer for keratinocyte inoculation. Meanwhile, the upper layer (pore size: 20-50 microm) was seeded with keratinocytes for epidermalization. The dermal fibroblasts were dynamically seeded in a self-designed spinner flask for more even cell distribution. The keratinocytes were cultured in submerged conditions for 5 days and then in an air-liquid interface condition for further differentiation. After being cultured for 21 days, the upper layer, seeded with keratinocytes, developed into an epidermis-like structure while the lower part, which was seeded with dermal fibroblasts developed into a dermis-like structure. A histological examination and immunostain were used to prove that keratinocytes maintain their phenotype and stratified epidermis layers were formed within 21 days. In brief, the bilayered skin substitute with biological dermal analog and epidermal structure was successfully fabricated. From this study, we can suggest that the culture model is suitable for autologous skin equivalent preparation.

Adjuvants, Immunologic↗

PubMed2006

Investigation of mitomycin-C-treated fibroblasts in 3-D collagen gel and conditioned medium for keratinocyte proliferation.

Fibroblasts produce a spectrum of necessary growth factors essential for growth and proliferation of a variety of cell types. In this study, the paracrine effect of mitomycin-C-treated fibroblasts with various densities in collagen gel for keratinocyte proliferation was investigated from which an optimum cell density and optimum conditioned medium would be determined to expand keratinocyte without further differentiation for skin equivalent tissue engineering. The optimum cell density in collagen feeder gel for optimum collected medium preparation will be determined by checking the level of keratinocyte growth factor and granulocyte macrophage colony-stimulating factor in conventional medium. The results showed that the cell density of 1 x 10(5) cells/gel in the feeder gel is better to produce optimum collected medium. The conditioned medium is prepared by mixing together the optimum collected medium and molecular cellular and developmental biology (MCDB) 153 medium in different ratios for keratinocyte growth. The keratinocyte viability will be measured by 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay to determine the optimum conditioned medium. From the study, 67% conditioned medium was supposed as the better medium for keratinocyte proliferation. In this experiment, the optimum cell density in feeder gel to coculture with keratinocytes is also determined as 1 x 10(5) cells/gel. Keratin 10 (K10) and Terminal Deoxynucleotidyl Transferase Mediated dUTP Nick End Labeling stain will be used to check the cell differentiation and apoptosis, respectively. The results suggest that keratinocytes should not be cultured in postconfluent conditions due to undesired apoptosis and differentiation. The result of cell viability from passages to passages shows that the optimum feeder gel plays a more important role to the keratinocyte proliferation than that of optimum conditioned medium. Keratinocytes cultured with optimum feeder gel in 67% conditioned medium could effectively promote proliferation, inhibit apoptosis, and prevent differentiation. The combination of conditioned media and feeder gel to culture keratinocytes without external supplements can provide an inexpensive way for keratinocyte proliferation and construct an environment for real-time communication between the two cells. The results conclude that keratinocyte cultivation in feeder gel with modified medium should be feasible in the production of high quality keratinocytes for skin equivalents preparation.

Antibiotics, Antineoplastic↗

PubMed2005

Tissue engineering-based cartilage repair with allogenous chondrocytes and gelatin-chondroitin-hyaluronan tri-copolymer scaffold: a porcine model assessed at 18, 24, and 36 weeks.

We previously showed that cartilage tissue can be engineered in vitro with porcine chondrocytes and gelatin/chondoitin-6-sulfate/hyaluronan tri-copolymer which mimic natural cartilage matrix for use as a scaffold. In this animal study, 15 miniature pigs were used in a randomized control study to compare tissue engineering with allogenous chondrocytes, autogenous osteochondral (OC) transplantation, and spontaneous repair for OC articular defects. In another study, 6 pigs were used as external controls in which full thickness (FT) and OC defects were either allowed to heal spontaneously or were filled with scaffold alone. After exclusion of cases with infection and secondary arthritis, the best results were obtained with autogenous OC transplantation, except that integration into host cartilage was poor. The results for the tissue engineering-treated group were satisfactory, the repair tissue being hyaline cartilage and/or fibrocartilage. Spontaneous healing and filling with scaffold alone did not result in good repair. With OC defects, the subchondral bone plate was not restored by cartilage tissue engineering. These results show that tri-copolymer can be used in in vivo cartilage tissue engineering for the treatment of FT articular defects.

Animals↗

PubMed2005

Epidermal morphogenesis in an in-vitro model using a fibroblasts-embedded collagen scaffold.

A novel culture system included a self-designed bi-layer 3-D collagen scaffold with different pore size on both sides and specific culture media for different culture stages. This skin equivalent culture model provides a new investigating system to study the role of extracellular matrix and growth factors including epidermal growth factor (EGF), keratinocyte growth factor (KGF), transforming growth factor beta 1 (TGF-beta1), in the cell-cell and cell-matrix interactions. Keratinocytes were seeded onto the dermal equivalent and incubated under submerged condition for 5 days then proceeding to air-liquid interface cultured either with or without EGF addition. In this study, EGF has a positive effect on the keratinocyte migration and proliferation in the submerged stage. However, when 10 ng per ml of EGF was continual added in the air-lifted stage, a less organized and thin differentiated keratinocyte layers were found. Continual 10 ng per ml of EGF addition in the air-lifted stage resulted in uneven cell-matrix interface, and disorganization of the suprabasal layers. On the contrary, in the air-lifted stage without excess EGF, the epithelium cells will stratify, differentiate, and form an epidermis completed with basal, spinous, granular, and cornified layers. The results showed that time scale modulation of EGF on keratinocyte cell behavior depend on the expression of paracrine or autocrine growth factors (e.g. KGF and TGF-beta1).

Animals↗

PubMed2005

Tricalcium phosphate and glutaraldehyde crosslinked gelatin incorporating bone morphogenetic protein--a viable scaffold for bone tissue engineering.

Bone defects caused by various etiologies must be filled with suitable substances to promote bone repair. Autogenous iliac crest graft is most frequently used, but is often associated with morbidities. Several bone graft substitutes have been developed to provide osteoconductive matrices as well as to enhance osteoinductivity. A tricalcium phosphate and glutaraldehyde crosslinked gelatin (GTG) scaffold, incorporated with bone morphogenetic proteins (BMPs), was developed to provide an alternative mean of bone tissue engineering. This study investigated differences between GTG and BMP-4 immobilized GTG (GTG-BMP) scaffolds on neonatal rat calvaria osteoblast activities. The GTG scaffold possessed an average pore size of 200 microm and a porosity of 75%. HE staining revealed uniform cell distribution throughout the scaffold 24 h post cell seeding. Alkaline phosphatase (ALP) activity of the GTG samples increased initially and then stabilized at 3 weeks postseeding. ALP activity of the GTG-BMP samples was similar to that of the GTG samples in the second and third weeks, but it continued increasing and became significantly greater than that of the GTG samples by the fourth week. Gla-type osteocalcin (Gla-OC) activity of the GTG-BMP samples was initially lower, but also became significantly greater than that of the GTG samples by the fourth week. An HE stain revealed greater numbers of attached cells and a richer matrix deposits in the GTG-BMP samples. A von Kossa stain showed larger mineralizing nodules, in greater numbers, after 4 weeks of in vitro cultivation. These findings suggest that the GTG scaffold provides an excellent porous structure, conductive to greater cell attachment and osteoblast differentiation, and that utility can be significantly enhanced by the inclusion of BMPs. A GTG-BMP scaffold holds promise as a superior bioactive material for bone tissue engineering.

Alkaline Phosphatase↗

PubMed2005

Gelatin/chondroitin-6-sulfate copolymer scaffold for culturing human nucleus pulposus cells in vitro with production of extracellular matrix.

Tissue-engineering approaches for treating degenerative intervertebral discs aim to regenerate intervertebral disc tissues in order to retard or even reverse the degenerative process. This study was designed to investigate the feasibility of the glutaraldehyde crosslinked gelatin/chondroitin-6-sulfate copolymer scaffold to serve as a bioactive scaffold for culturing human nucleus pulposus (NP) cells in vitro with preservation of the cell viability, cell proliferation, and production of important extracellular matrix, including glycoaminoglycans (GAG) and Type II collagen. Each experimental sample was seeded with 1 x 10(6) human NP cells, and then the cell-scaffold hybrids were cultured in vitro for 6 or 12 weeks. SEM showed a highly porous structure with an average pore size of 100 microm in the copolymer scaffold. Immediately after cell seeding, SEM showed that the seeded cells penetrated deeply and distributed evenly in the copolymer scaffold. Water-soluble tetrazolium salt-1 (WST-1) assay showed good viability and active proliferation of cultured human NP cells in the copolymer scaffolds up to 12 weeks. The cell-scaffold hybrids contained significantly higher levels of sulfated GAG than the control samples (41.29 mug vs 6.04 mug per scaffold). Immunohistochemical study showed Type II collagen fibrils on the surface of scaffold substrate after 6 weeks of cultivation. More abundant deposition of Type II collagen could be detected after 12 weeks. The results achieved in this study indicate that the gelatin/chondroitin-6-sulfate copolymer scaffold is a promising bioactive scaffold for regeneration of nucleus pulposus tissue.

Biocompatible Materials↗

PubMed2005

The role of muscle-derived stem cells in bone tissue engineering.

The formation of bone and repair of bone defect requires a source of pluripotential mesenchymal stem cells. However, the capacity of the human body to generate bone components is limited. In this report, we show that the highly purified myogenic cells by the preplate technique have the capacity to differentiate into osteogenic lineage in vitro. The recombinant human bone morphogenic protein (rh-BMP-2) was immobilized on the molded gelatin composite. Primary muscle cells were isolated from newborn Wistar-rats calf muscle. The cells were then preplated in collagen-coated flasks. After six serial platings, the culture was enriched with small, round cells [pp6]. The effects of immobilized rhBMP-2 on the gelatin scaffold were evaluated by the analysis of alkaline phosphatase (ALP) and osteocalcin in culture medium after seedings of muscle-derived cells [pp6]. The results showed that the cells isolated from pp6 slow adhering cells possessed round mononuclear phenotype, marked ALP stain and matrix mineralization. The synthesis and secretion of ALP from pp6 muscle-derived cells were persistent higher than that of pp1-pp5 groups. The efficacy of rhBMP-2 immobilization on the gelatin scaffolds as manifested as the synthesis and secretion of ALP and osteocalcin from muscle-derived cells was always significantly higher than that of the control samples. In summary, our results suggest that the muscle-derived pp6 cells were capable of inducing and participating in bone formation. These results suggest that muscle tissue is a valuable resource for osteoprogenitor cells to be used in clinical practice to improve bone healing.

Animals↗

PubMed2005

Release characteristics and bioactivity of gelatin-tricalcium phosphate membranes covalently immobilized with nerve growth factors.

The gelatin-tricalcium phosphate membranes were cross-linking with low concentration glutaraldehyde solution (GTG). This material has good mechanical property, biocompatibility, and is feasible for surgical manipulation. For axonal regeneration, nerve growth factors (NGF) were immobilized onto the composite (GTG) with carbodiimide. The purpose of this study was to evaluate the release characteristics and bioactivity of NGF after covalent immobilization onto the GTG membranes (GEN). NGF immobilized onto and released from the composite was quantified using ELISA method. PC 12 cells were cultured on the GTG and GEN composites. Cell survival, cytotoxicity, and cellular activity were evaluated by total protein content, LDH activity, and MTT assay respectively. Neurite outgrowth assay was used to evaluate the biological activity of NGF released from GEN composite. From ELISA measurement, the releasing curve for NGF showing two distinctive parts with different slopes indicated that NGF were released from the composite in diffusion-controlled mechanism and degradation-controlled mechanism respectively. While culturing with PC 12 cells, LDH leakage results implied that whether GTG composite cross-linked with NGF or not showed little cytotoxicity. The total protein content and cellular activity of PC 12 cells were lower on GTG and GEN membranes than control group. However, 56%+/-3.98 of PC 12 cells showed significant neurite outgrowth on GEN membranes which was statistically higher than GTG without NGF immobilization. In addition, sustained release of bioactive NGF for two months had been demonstrated by neurite outgrowth assay. From these experiments, it can be concluded that the technique used in the present study is capable of immobilizing NGF onto GTG membranes covalently and remaining the bioactivity of NGF. Therefore, GEN composite can be materials for sustained release of bioactive NGF and a candidate for future therapeutic application in nerve repair.

Animals↗

PubMed2005

An in-vitro study on regeneration of human nucleus pulposus by using gelatin/chondroitin-6-sulfate/hyaluronan tri-copolymer scaffold.

Tissue engineering approaches for treating degenerative intervertebral discs aim to promote tissue regeneration then retard or even reverse the degenerative process. A gelatin/chondroitin-6-sulfate/hyaluronan tri-copolymer was developed to serve as a bioactive scaffold that could help human nucleus pulposus (NP) cells to preserve their cell viability/proliferation and promote matrix synthesis. Each scaffold was seeded with 1 x 10(6) monolayer-expanded human NP cells and then cultured in vitro. Over a 4-week cultivation period, cell-scaffold hybrids demonstrated active cell viability/proliferation and a progressive increase in net production of glycosaminoglycans. In comparison to monolayer cells, scaffold-cultured cells showed significantly higher mRNA expression in collagen II, aggrecan, Sox9, TGFbeta1, and TIMP1. Expression of mRNA was significantly suppressed in collagen I, collagen X, IL1, and Fas-associating death domain protein. Histological studies showed newly synthesized glycosaminoglycans deposits and collagen II in scaffolds. These results indicate that the tri-copolymer scaffold could be considered as a promising bioactive scaffold for regenerating human NP.

Adjuvants, Immunologic↗