Biomedical subjects

Flavio Forni

Publications and source records attributed to Flavio Forni.

10 recordsLinked to original sources

PubMed2006

Nanoparticulate drug carriers based on hybrid poly(D,L-lactide-co-glycolide)-dendron structures.

We describe a general method for incorporating target moieties in a well-defined arrangement into the surface of biocompatible polyester poly(D,L-lactic-co-glycolic acid) (PLGA) materials using dendrons. In this way it is possible to obtain nanoparticles (NPs) with a high degree of surface coverage. This new strategy was successfully applied to the preparation of peptide- and beta-D-glucose-covered NPs. The first application is based on the discovery of NPs made of conjugates between PLGA and short peptidic sequences able to cross the blood-brain barrier (BBB) after systemic administration. In this paper, we used a branched structure (dendron) in order to prepare a derivative of PLGA able to form, by simple nanoprecipitation, NPs with a higher degree of surface coverage than previously reported by us, characteristic that could influence the uptake by the liver and spleen. The NPs thus obtained retain the ability to cross the BBB and possess a core-shell structure, as evidenced from zeta-potential, X-ray photoelectron (ESCA) spectroscopy and elemental analyses. These results are comparable with the NPs obtained by the derivatization of preformed NPs. The same strategy, namely the use of a branched spacer (a dendron or a G1 dendrimer) inserted between one end of the PLGA chain and a derivatizing molecule, was also successfully applied to obtain beta-D-glucose-covered NPs; in this case, the surface analysis of the NPs was performed by using high resolution magic angle spinning (HRMAS) NMR spectroscopy and zeta-potential measurements.

Animals↗

PubMed2005

Peptide-derivatized biodegradable nanoparticles able to cross the blood-brain barrier.

Injectable nanoparticulate drug carriers (Np) able to cross the blood-brain barrier (BBB) have important potential applications for the treatment of diseases that affect the central nervous system (CNS). With the aim to create a system able to address Np to the CNS, we synthesized conjugates between a biodegradable copolymer, poly(D,L-lactide-co-glycolide) (PLGA), and five short peptides, by means of an amidic linkage. These peptides, that are similar to synthetic opioid peptides, were synthesized in turn by means of Fmoc solid-phase peptide synthesis. The new five modified copolymers thus obtained turned out to be valuable starting material for the preparation of Np; these were made fluorescent, in order to allow their localization after their administration, by inclusion of a fluorescent probe. The Np thus prepared were characterized (morphology, size and z-potential) and were shown to possess the peptidic moieties on their surface, as evidenced by ESCA spectroscopy. Then, their ability to cross the BBB was assessed by the in vivo Rat Brain Perfusion Technique and, in one case, by means of a systemic administration (rat femoral vein injection). Fluorescent and confocal microscopy studies showed that while PLGA Np are unable to cross the BBB, for the first time these solid Np surface-modified with peptides were shown to be able to cross the BBB.

Animals↗

PubMed2005

Development and characterization of biodegradable nanospheres as delivery systems of anti-ischemic adenosine derivatives.

We report a preliminary study concerning the encapsulation modalities in nanoparticles of the anti-ischemic drug N6-cyclopentyladenosine (CPA) and its pro-drug 5'-octanoyl-CPA (Oct-CPA). The release of these compounds and the related pro-drug stability effects in human whole blood have been tested. Moreover, the influence of the delivery systems on CPA interaction toward human adenosine A1 receptor has been analysed. The nanospheres were prepared by nanoprecipitation or double emulsion solvent evaporation method using poly(lactic acid) and recovered by gel filtration or ultracentrifugation or dialysis. Free and encapsulated Oct-CPA was incubated in fresh blood and its stability was analysed with HPLC. Quite spherical nanoparticles with mean diameters ranging between 210+/-50 and 390+/-90 nm were obtained. No encapsulation occurred when CPA was used. Satisfactory results concerning drug content (0.1-1.1% w/w) and encapsulation efficiency (6-56%) were achieved when Oct-CPA was employed. The controlled release of the pro-drug was achieved, being released within a range of 1-4 h, or very slowly, depending on nanoparticle preparations. The hydrolysis rate of Oct-CPA in human whole blood appeared stabilized in human whole blood with modalities related to the release patterns. The presence of all nanoparticle preparations did not interfere with CPA interaction at its action site.

Absorbable Implants↗

PubMed2005

Atomic force microscopy and photon correlation spectroscopy: two techniques for rapid characterization of liposomes.

The direct evaluation of the heterogeneity of the particle population of nanometric drug delivery systems as liposomes is difficult to achieve owing to the dimension and the carrier characteristics. The influence of the lipidic ratio and composition on the physical stability of liposomes during their storage was investigated using atomic force microscopy (AFM) and photon correlation spectroscopy (PCS). Liposomes were made by a mixture of different lipids and obtained using distinct methods of preparation. AFM images, acquired immediately after the deposition of the sample on mica surface, clearly showed the spherical shape of the lipidic vesicles. In all the 7 months of the experiment, the average sizes of the different liposomes evaluated using the two techniques were comparable. According to PCS analysis, AFM images confirmed that almost all the diversified vesicular systems tended to form aggregates during their storage; this loss of stability was strengthened by the increase of polydispersity index value. The different behaviours observed were to ascribe to the lipidic composition more than the methods of liposome preparation. In conclusion, AFM technique owing to the relative simplicity cold be useful for the technological control of size distribution profile according to the preparative factors and moreover to the batch-to-batch reproducibility.

Drug Carriers↗

PubMed2005

Ketorolac tromethamine liposomes: encapsulation and release studies.

Liposomes loaded with ketorolac tromethamine salt were prepared by using a thin layer evaporation method. The physical properties of liposomes were studied by using atomic force microscopy (AFM) and transmission electron microscopy (TEM). The relationship between lipid composition, encapsulation efficiency, vesicle size, and the release of ketorolac tromethamine-loaded liposomes was studied. The drug content was found to be dependent on the lipidic composition used in the preparations and, in particular, vesicles containing both cationic lipids (dimethyldioctadecylammonium bromide and N-[1-(2,3-dioleoyloxy)propyl]-N,N,N-trimethylammonium chloride), and phosphatidylcholine had a higher entrapped efficiency than liposomes with phosphatidylcholine alone or in the presence of cholesterol. Finally, the cationic liposomes appear to be useful as carriers for ketorolac tromethamine to control its in vitro release.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2005

Liposome-oligonucleotides interaction for in vitro uptake by COS I and HaCaT cells.

Liposomes are considered very promising delivery systems for antisense therapeutic approach, offering drug protection and facilitating oligonucleotide cell internalization. The present study was aimed to investigate the influence of phospholipid composition of the liposomal systems both on the encapsulation and on the oligonucleotide carrier capacity in vitro. Liposomes composed of neutral (phosphatidylcholine, cholesterol and dioleoylphosphatidylethanolamine) and/or cationic lipids (N-(1-(2,3-dioleoyloxy)propyl)-N,N,N-trimethylammonium chloride salt, DOTAP) with different molar ratios were complexed with 5' fluorescein conjugated 29-mer phosphorothioate oligonucleotide (PS-ODN). The interaction was evaluated using atomic force microscopy (AFM), gel electrophoresis and HPLC analysis. Cytofluorimetric analysis and fluorescence microscopy were applied to evaluate the uptake and intracellular distribution of fluorescently labelled PS-ODN after transfection in two cell lines, COS I (fibroblast cell) and HaCaT (immortalized keratinocyte cell). The AFM studies reveal that the liposome/PS-ODN interaction leads the formation of a new irregular structure that completely hides the PS-ODN. Gel electrophoresis experiments and HPLC analysis have clearly demonstrated that also neutral liposomes are able to keep a little amount of PS-ODN but without strain to the complexation; the interaction was weak and rapidly destabilized when the complex was added to the cells. Transfection experiments performed with different incubation times show that DOTAP liposomes increase the rate of cellular uptake of PS-ODN and seem to influence its intracellular distribution in COS I cells where the oligonucleotide looks localized in nucleoli. Similar behaviour, at a lesser extent, is exhibited in HaCaT cells.

Animals↗

PubMed2004

In vitro evaluation of PLA nanoparticles containing a lipophilic drug in water-soluble or insoluble form.

Cloricromene (AD6), an anti-ischemic drug, is rapidly metabolised into a stable and active metabolite (cloricromene acid, AD6-acid) poorly soluble in water and less lipophilic than cloricromene. The aim of this study was to evaluate which of the two forms has more possibility to be efficiently encapsulated in nanoparticles based on poly(D,L-lactide) and prepared using the nanoprecipitation method. Increasing the theoretical loading of AD6, an increase in drug actual loading and in the mean particle size occurred, while no formation of nanoparticles was observed when the highest theoretical loading (50 mg) was employed. Changing the pH of the aqueous phase the drug content dramatically increased. However, at a pH value of 11 a more rapid hydrolysis of AD6 occurred. When AD6-acid was embedded in the nanoparticles, suitable results concerning both drug content and encapsulation efficiency were achieved. A good control in the release of AD6 from the AD6-loaded nanoparticles was observed while the liberation of AD6-acid from the AD6-acid-loaded nanoparticles was faster than the dissolution of the AD6-acid free. These results confirm that the most easy encapsulable form in nanoparticles is AD6-acid probably owing to its poor water solubility. Further studies will be carried out in order to evaluate if the increase in the liberation of AD6-acid by nanoencapsulation may have outcomes in its bioavaibility in vivo.

Chromonar↗

PubMed2004

Microwave-treated gelatin microspheres as drug delivery system.

The crosslinking process of natural macromolecules with microwave energy should have the potentiality to overcome the problems due to the toxicity of the residuals of chemical crosslinking agents and moreover of the "in vivo" biodegradation products of the chemical crosslinked macromolecule. To evaluate the effective crosslinking of the gelatin forming the microspheres, the water-soluble fraction at 37 degrees C, the water absorption capability, the free amino and free carboxylic acid groups of the gelatin were determined. The structural change in the gelatin microspheres has been detected by the porosity studies. Moreover, both the "in vitro" biodegradability and the biocompatibility of the gelatin microspheres microwave-treated after a subcutaneous injection into female albino guinea pigs were tested. As the results suggest only the gelatin microspheres microwave-treated for 10 min at an inlet temperature of 250 degrees C could have been modified by the crosslink formation among the macromolecular chains. The gelatin microspheres treated with the microwave energy were very well biodegraded as indicated both by the "in vitro" enzymatic degradation studies and mainly by the histopathological examination. This latter study has also demonstrated the biocompatibility of the gelatin microspheres crosslinked with the microwave energy. In order to evaluate the feasibility of the microwave crosslinking process for pharmaceutical applications, both the drug loading and the drug release processes were evaluated using diclofenac as drug model, either as acidic form or as sodium salt. The microspheres were swollen in aqueous solution of diclofenac sodium salt, followed by a washing procedure with cool water to maintain the sodium salt into the microspheres or with pH 1.5 HCl to induce the diclofenac precipitation. To increase the amount of diclofenac acid form in the microspheres, the procedure was repeated three times washing with pH 1.5 HCl after each swelling process. Both the X-ray diffractometry and thermal analysis investigations showed a different physical state of the two drug forms in the microspheres, i.e. the amorphous state of the sodium salt and the crystalline state of the acidic form. According to the experimental results, the drug is released from gelatin microspheres according to the drug loading and the drug solubility.

Animals↗

PubMed2004

Characterization of the mechanism of interaction in ibuprofen-Eudragit RL100 coevaporates.

The present study is a preliminary exploration of the affinity between a carboxylic model drug, the nonsteroidal antiinflammatory agent ibuprofen (IBU) and Eudragit RL100 (RL) polymer. Due to the presence of a variable amount of quaternary ammonium groups in this matrix, physical and chemical interaction with the carboxylic drug can occur, which reinforces its scant mechanical dispersion in the polymer network and can ultimately affect its release profile in vitro and in vivo. To study these aspects, IBU was mixed at increasing weight ratios and in different chemical forms (free acid, sodium salt, and n-butyl ester), to investigate further the role of the carboxylic group in the interaction with the RL polymer. Therefore, IBU-RL solid dispersions (coevaporates) were obtained and fully characterized in the solid state through spectroscopic, calorimetric, and x-ray diffractometric analyses. The in vitro release pattern of the drug, in the different chemical states, was studied for the coevaporates, compared with drug-RL physical mixtures, along with drug adsorption profiles from aqueous solutions on the surface of the polymer granules.

Acrylic Resins↗

PubMed2003

Cationic liposomes for gene transfection.

Cationic liposomes spontaneously interact with the negatively charged DNA to form a stable complex that promotes the gene transfer to cells. The mode of formation and the size of cationic liposomes/DNA complexes were investigated using the atomic force microscopy (AFM). Also the most important physical-chemical factors involved in cationic liposome-mediated gene transfection, e.g. size and lipidic composition, were evaluated through the transfection of complexes with different liposomes/DNA molar ratio into three types of cultured cells. Cationic liposomes, composed of a neutral lipid (phosphatidilcoline), a cationic lipid dimethyldioctadecylammonium bromide (DDAB), a co-lipid 1,2-dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE) and a phospholipid derivative of polyethylene glycol (DSPE-mPEG) at different molar ratio, were mixed with a plasmid pCMVbeta to form liposomes/DNA complexes. We have demonstrated that the complexes were made by complicated structures in which the liposomes tend to aggregate and the DNA is surrounded by lipidic material. In vitro transfection efficiency by liposomes/plasmid pCMVbeta complexes was found to depend on the kind of lipid associated in the liposomes and the liposomes/DNA mixing ratio. The importance of associating DOPE in cationic liposomes was confirmed; this co-lipid is able to improve the ability of cationic liposomes to transfect cells but in addition, the AFM images and the EtBr fluorescence experiments have suggested that this lipid can also play an important role to facilitate the formation of stable liposomes, which efficaciously protect the DNA by nuclease digestion.

Animals↗