Biomedical subjects

Florian Unger

Publications and source records attributed to Florian Unger.

6 recordsLinked to original sources

PubMed2005

Synthesis, characterization and cytotoxicity of poly(ethylene glycol)-graft-trimethyl chitosan block copolymers.

PEGylated trimethyl chitosan (TMC) copolymers were synthesized in an attempt to both increase the solubility of chitosan in water, and improve the biocompatibility of TMC. A series of copolymers with different degrees of substitution were obtained by grafting activated poly(ethylene glycol)s (PEG) of different MW onto TMC via primary amino groups. Structure of the copolymers was characterized using 1H, 13C NMR spectroscopy and GPC. Solubility experiments demonstrated that PEG-g-TMC copolymers were completely water-soluble over the entire pH range of 1-14 regardless of the PEG MW, even when the graft density was as low as 10%. Using the methyl tetrazolium (MTT) assay, the effect of TMC molecular weight, PEGylation ratio, PEG and TMC molecular weight in the copolymers, and complexation with insulin on the cytotoxicity of TMC was examined, and IC50 values were calculated with L929 cell line. All polymers exhibited a time- and dose-dependent cytotoxic response that increased with molecular weight. PEGylation can decrease the cytotoxicity of TMC to a great extent in the case of low molecular weight TMCs. According to the cytotoxicity results, PEG 5 kDa is superior for PEGylation when compared to PEG 550 Da at similar graft ratios. Complexation with insulin further increased cell viability. In addition, Lactate dehydrogenase (LDH) assays were performed to quantify the membrane-damaging effects of the copolymers, which is in line with the conclusion drawn from MTT assay. Moreover, the safety of the copolymers was corroborated by observing the morphological change of the cells with inverted phase contrast microscopy. Based upon these results PEG-g-TMC merits further investigations as a drug delivery vehicle.

Animals↗

PubMed2004

The depolymerization of chitosan: effects on physicochemical and biological properties.

Chitosan has been extensively used as an absorption enhancer for macromolecules and as gene delivery vehicle. Both properties are molecular weight (MW) dependent. Here, we investigate factors affecting the oxidative depolymerization of chitosan and physicochemical properties of the resulting polymer fractions including their cytotoxicity. The molecular weight of the depolymerized chitosan was influenced by the initial concentration and the source of chitosan. At constant initial concentrations, the molecular weight decreased linearly with the chitosan/NaNO2 ratio and was a function of logarithm of the reaction time. Chitosan with larger molecular weight was more sensitive to depolymerization. No structural change was observed during the depolymerization process by infrared and proton nuclear magnetic resonance spectroscopy. In addition, thermal properties of chitosan fragments were studied by thermal gravimetric analysis and it was found that the decomposition temperature was molecular weight dependent. Furthermore, the solubility of different molecular weight chitosan was assayed as a function of pH and it increased with decreasing molecular weight. The cytotoxicity of chitosan was concentration dependent but almost molecular weight independent according to MTT assay using L929 cell line recommended by USP26. In summary, low molecular weight fractions of chitosan may potentially useful for the design of drug delivery systems due to the improved solubility properties.

Biocompatible Materials↗

PubMed2004

Design of amine-modified graft polyesters for effective gene delivery using DNA-loaded nanoparticles.

PURPOSE: The purpose of this study was the design of a polymeric platform for effective gene delivery using DNA-loaded nanoparticles. METHODS: The polymers were synthesized by carbonyldiimidazole (CDI)-mediated coupling of diamines diethylaminopropylamine (DEAPA), dimethylaminopropylamine (DMAPA) or diethylaminoethylamine (DEAEA) to poly(vinyl alcohol) (PVA) with subsequent grafting of D,L-lactide and glycolide (1:1) in the stoichiometric ratios of 1:10 and 1:20 (free hydroxyl groups/monomer units). The polymers were characterized by 1H-NMR, gel permeation chromatography-multiple-angle laser-light-scattering, and differential scanning calorimetry. DNA-loaded nanoparticles prepared by a modified solvent displacement method were characterized with regard to their zeta (zeta)-potential and size. The transfection efficiency was assessed with the plasmid DNA pCMV-luc in L929 mouse fibroblasts. RESULTS: The polymers were composed of highly branched, biodegradable cationic polyesters exhibiting amphiphilic properties. The amine modification enhanced the rapid polymer degradation and resulted in the interaction with DNA during particle preparation. The nanoparticles exhibited positive zeta-potentials up to +42 mV and high transfection efficiencies, comparable to polyethylenimine (PEI) 25 kDa/DNA complexes at a nitrogen to phosphate ratio of 5. CONCLUSIONS: The polymers combined amine-functions and short poly(D,L-lactic-co-glycolic acid) (PLGA) chains resulting in water-insoluble polymers capable of forming biodegradable DNA nanoparticles through coulombic interactions and polyester precipitation in aqueous medium. The high transfection efficiency was based on fast polymer degradation and the conservation of DNA bioactivity.

Animals↗

PubMed2002

ABA-triblock copolymers from biodegradable polyester A-blocks and hydrophilic poly(ethylene oxide) B-blocks as a candidate for in situ forming hydrogel delivery systems for proteins.

Hydrogels are very attractive delivery systems for hydrophilic macromolecules such as proteins and DNA because they provide a protective environment and allow control of diffusion by adjusting cross-link densities. Physically cross-linked hydrogels generated by rapid swelling upon exposure to an aqueous environment can be obtained from ABA triblock copolymers containing hydrophobic polyester A-blocks and hydrophilic polyether B-blocks. They provide an attractive alternative to chemically cross-linked systems since they allow incorporation of macromolecular drug substances under mild process conditions. Moreover, they show controlled degradation behavior and excellent biocompatibility. In this review the synthesis and characterization of ABA triblock copolymers from polyester hard segments and poly(ethylene oxide) [PEO] soft segments as well as their biological and degradation properties will be discussed. Their use as biodegradable drug delivery devices in the form of implants, micro- and nanospheres has attracted considerable interest especially for proteins and may provide an alternative to poly(lactide-co-glycolide).

Animals↗

PubMedDate not supplied

Supramolecular gene delivery vectors showing enhanced transgene expression and good biocompatibility.

Soluble supramolecular inclusion complexes were formed by threading alpha-cyclodextrin (alpha-CD) molecules over poly(ethylene glycol) (PEG) and poly(epsilon-caprolactone) (PCL) chains of ternary block copolymers of PEG, PCL and polyethylenimine (PEI). Characteristic shifts of PCL absorptions in FTIR, (1)H NMR and UV spectra strongly suggest that alpha-CD is threaded over PEG and PCL blocks. Due to the reduced hydrophobic interaction between PCL blocks, the resulting supramolecular complexes displayed a dramatically increased solubility, in comparison with the ternary block copolymers. Their ability to complex DNA was almost as efficient as that of branched PEI 25 kDa, as shown in the ethidium bromide fluorescence quenching experiments. Resulting DNA polyplexes displayed a size of around 200 nm and a neutral surface charge. Microscopy studies in 3T3 fibroblasts revealed an efficient cellular uptake. Transfection efficiencies of inclusion complexes were in the same order of magnitude as PEI. In contrast to PEI a 100x lower toxicity was observed by MTT-assay, allowing the administration of nitrogen-to-phosphate ratios of up to 20. These new gene delivery systems merit further characterization under in vivo conditions.

Animals↗

PubMedDate not supplied

Biophysical and transfection studies of an amine-modified poly(vinyl alcohol) for gene delivery.

Novel, multifunctional polymers remain an attractive objective for drug delivery, especially for hydrophilic macromolecular drugs candidates such as peptides, proteins, RNA, and DNA. To facilitate intracellular delivery of DNA, new amine-modified poly(vinyl alcohol)s (PVAs) were synthesized by a two-step process using carbonyl diimidazole activated diamines to produce PVAs with different degrees of amine substitution. The resulting polymers were characterized using NMR, thermogravimetric analysis (TGA), and gelpermation chromatography (GPC). Atomic force microscopy (AFM), dynamic light scattering photon correlation spectroscopy (PCS), and zeta-potential were used to investigate polyplexes of DNA with PVA copolymers. These studies suggest an influence of the polycation structure on the morphology of condensed DNA in polyplexes. Significant differences were observed by changing both the degrees of amine substitution and the structure of the PVA backbone, demonstrating that both electrostatic and hydrophobic interactions affect DNA condensation. DNA condensation measured by an ethidium bromide intercalation assay showed a higher degree of condensation with pDNA with increasing degrees of amine substitution and more hydrophobic functional groups. These findings are in line with transfection experiments, in which a good uptake of these polymer DNA complexes was noted, unfortunately, with little endosomal escape. Co-administration of chloroquine resulted in increased endosomal escape and higher transfection efficiencies, due to disruption of the endosomal membrane. In this study, the structural requirements for DNA complexation and condensation were characterized to provide a basis for rational design of nonviral gene delivery systems.

3T3 Cells↗