PubMed Health⌕ Search

Biomedical subjects

François Diederich

Publications and source records attributed to François Diederich.

At least 19 recordsLinked to original sources

Self-assembly, DNA complexation, and pH response of amphiphilic dendrimers for gene transfection.

Cationic lipids and polymers are routinely used for cell transfection, and a variety of structure-activity relation data have been collected. Few studies, however, focus on the structural aspects of self-assembly as a crucial control parameter for gene delivery. We present here the observations collected for a set of cationic dendritic amphiphiles based on a stiff tolane core (1-4) that are built from identical subunits but differ in the number and balance of their hydrophobic and cationic hydrophilic moieties. We established elsewhere that vectors 3 and 4 have promising transfection properties. Scanning probe microscopy (AFM, STM), cryo-transmission electron microscopy (cryo-TEM), and Langmuir techniques provide insight into the self-assembly properties of the molecules under physiological conditions. Furthermore, we present DNA and pH "jump" experiments where we study the response of Langmuir films to a sudden increase in DNA concentration or a drop in pH. We find that the primary self-assembly of the amphiphile is of paramount importance and influences DNA binding, serum sensitivity, and pH response of the vector system.

Cations↗

Phosphate recognition in structural biology.

Drug-discovery research in the past decade has seen an increased selection of targets with phosphate recognition sites, such as protein kinases and phosphatases, in the past decade. This review attempts, with the help of database-mining tools, to give an overview of the most important principles in molecular recognition of phosphate groups by enzymes. A total of 3003 X-ray crystal structures from the RCSB Protein Data Bank with bound organophosphates has been analyzed individually, in particular for H-bonding interactions between proteins and ligands. The various known binding motifs for phosphate binding are reviewed, and similarities to phosphate complexation by synthetic receptors are highlighted. An analysis of the propensities of amino acids in various classes of phosphate-binding enzymes showed characteristic distributions of amino acids used for phosphate binding. This review demonstrates that structure-based lead development and optimization should carefully address the phosphate-binding-site environment and also proposes new alternatives for filling such sites.

Models, Molecular↗

Synthesis and characteristics of a nonaggregating tris(tetrathiafulvaleno)dodecadehydro[18]annulene.

A new tris(tetrathiafulvaleno)dodecadehydro[18]annulene with six peripheral n-hexyl substituents was prepared by oxidative Glaser-Hay cyclization of a corresponding diethynylated tetrathiafulvalene (TTF) precursor. The electronic properties of the neutral and oxidized species were studied by both UV/Vis absorption spectroscopy and electrochemistry. From these studies, it transpires that the strongly violet-colored macrocycle does not aggregate in solution to any significant degree, which was confirmed by (1)H NMR spectroscopy. This reluctance towards aggregation contrasts that observed for related TTF-annulenes containing other peripheral substitutents. Oxidation of the TTF-annulene occurs in two three-electron steps as inferred from both the peak amplitudes and the spectroelectrochemical study. We find that the tris(TTF)-fused dehydro[18]annulene is more difficult to oxidize (by +0.20 V) than the silyl-protected diethynylated mono-TTF precursor. In contrast, the first vertical ionization energy calculated at the B3 LYP/6-311+G(2d,p) level for the parent tris(TTF)-fused dehydro[18]annulene devoid of peripheral hexyl substituents is in fact lower (by 0.44 eV). Moreover, the surface morphology of 1 d drop-cast on a mica substrate was investigated by atomic force microscopy (AFM). Crystalline domains with slightly different orientations were observed. The thickness of individual layers seen in the crystalline domains and the thickness of a monolayer obtained from a very dilute solution were determined to 1.8-1.9 nm. This thickness corresponds to the diameter of the macrocycle and the layers seen in the film are apparently formed when the molecules stack in the horizontal direction relative to the substrate.

Journal Article↗

Triply fused Zn(II)-porphyrin oligomers: synthesis, properties, and supramolecular interactions with single-walled carbon nanotubes (SWNTs).

The photophysical, electrochemical, and self-assembly properties of a novel triply fused Zn(II)-porphyrin trimer were investigated and compared to the properties of a triply fused porphyrin dimer and the analogous monomer. The trimer exhibited significantly red-shifted absorption bands relative to the corresponding monomer and dimer. Electrochemical investigations indicated a clear trend in redox properties amongst the three porphyrin structures, with the lowest oxidation potential and the lowest HOMO-LUMO gap exhibited by the triply fused trimer. This electrochemical behavior is attributed to the extensive pi-electron delocalization in the trimeric structure relative to the monomer and dimer. Additionally, it was found that the trimer forms extremely strong and nearly irreversible supramolecular interactions with single-walled carbon nanotubes (SWNTs), resulting in stable solutions of porphyrin-nanotube complexes in THF. Formation of these complexes required the addition of trifluoroacetic acid (TFA) to the solvent. This allowed the oligomers to make close contact with the nanotubes, enabling the formation of stable supramolecular assemblies. Atomic force microscopy (AFM) was used to observe the supramolecular porphyrin-nanotube complexes and revealed that the porphyrin trimer formed a uniform coating on the SWNTs. Height profiles indicated that nanotube bundles could be exfoliated into either individual tubes or very small bundles by exposure to the porphyrin trimer during sonication.

Journal Article↗

Adsorption and dynamics of long-range interacting fullerenes in a flexible, two-dimensional, nanoporous porphyrin network.

Herein, a detailed investigation of the adsorption and dynamics of C60 and C70 fullerenes hosted in a self-assembled, two-dimensional, nanoporous porphyrin network on a solid Ag surface is presented. Time-resolved scanning tunneling microscopy (STM) studies of these supramolecular systems at the molecular scale reveal distinct host-guest interactions giving rise to a pronounced dissimilar mobility of the two fullerenes within the porphyrin network. Furthermore, long-range coverage-dependent interactions between the all-carbon guests, which clearly affect their mobility and are likely mediated by a complex mechanism involving the Ag substrate and the flexible porphyrin host network, are observed. At increased fullerene coverage, this unprecedented interplay results in the formation of large fullerene chains and islands. By applying a lattice gas model with nearest-neighbor interactions and by evaluating the fullerene-pair distribution functions, the respective coverage-dependent guest-guest interaction energies are estimated.

Journal Article↗

Conformational behavior of pyrazine-bridged and mixed-bridged cavitands: a general model for solvent effects on thermal "vase-kite" switching.

The controllable switching of suitably bridged resorcin[4]arene cavitands between a "vase" conformation, with a cavity capable of guest inclusion, and a "kite" conformation, featuring an extended flattened surface, provides the basis for ongoing developments of dynamic molecular receptors, sensors, and molecular machines. This paper describes the synthesis, X-ray crystallographic characterization, and NMR analysis of the "vase-kite" switching behavior of a fully pyrazine-bridged cavitand and five other mixed-bridged quinoxaline-bridged cavitands with one methylene, phosphonate, or phosphate bridge. The pyrazine-bridged resorcin[4]arene cavitand displayed an unexpectedly high preference for the kite conformation in nonpolar solvents, relative to the quinoxaline-bridged analogue. This observation led to extensive solvent-dependent switching studies that provide a detailed picture of how solvent affects the thermal vase-kite equilibration. As for any thermodynamic process in the liquid phase, the conformational equilibrium is affected by how the solvent stabilizes the two individual states. Suitably sized solvents (benzene and derivatives) solvate the cavity of the vase form and reduce the propensity for the vase-to-kite transition. Correspondingly, the kite geometry becomes preferred in bulky solvents such as mesitylene, incapable of penetrating the vase cavity. As proposed earlier by Cram, the kite form is preferred at low temperatures due to the more favorable enthalpy of solvation of the enlarged surface. Furthermore, the kite conformation is more preferred in solvents with substantial hydrogen-bonding acidity: weak hydrogen-bonding interactions between the mildly basic quinoxaline and pyrazine nitrogen atoms and solvent molecules are more efficient in the open kite than in the closed vase form. Vase-to-kite conversion is entirely absent in dipolar aprotic solvents lacking any H-bonding acidity. Thermal vase-kite switching requires fully quinoxaline- or pyrazine-bridged cavitands, whereas pH-controlled switching is also applicable to systems incorporating only two or three such bridges.

Journal Article↗

Multipolar interactions in the D pocket of thrombin: large differences between tricyclic imide and lactam inhibitors.

Two series of tricyclic inhibitors of the serine protease thrombin, imides (+/-)-1-(+/-)-8 and lactams (+/-)-9-(+/-)-13, were analysed to evaluate contributions of orthogonal multipolar interactions with the backbone C=O moiety of Asn98 to the free enthalpy of protein-ligand complexation. The lactam derivatives are much more potent and more selective inhibitors (K(i) values between 0.065 and 0.005 microM, selectivity for thrombin over trypsin between 361- and 1609-fold) than the imide compounds (Ki values between 0.057 and 23.7 microM, selectivity for thrombin over trypsin between 3- and 67-fold). The increase in potency and selectivity is explained by the favorable occupancy of the P-pocket of thrombin by the additional isopropyl substituent in the lactam derivatives. The nature of the substituent on the benzyl ring filling the D pocket strongly influences binding potency in the imide series, with Ki values increasing in the sequence: F < OCH2O < Cl < H < OMe < OH < N(pyr)<< Br. This sequence can be explained by both steric fit and the occurrence of orthogonal multipolar interactions with the backbone C[double bond, length as m-dash]O moiety of Asn98. In contrast, the substituent on the benzyl ring hardly affects the ligand potency in the lactam series. This discrepancy was clarified by the comparison of X-ray structures solved for co-crystals of thrombin with imide and lactam ligands. Whereas the benzyl substituents in the imide inhibitors are sufficiently close (< or =3.5 Angstroms) to the C=O group of Asn98 to allow for attractive orthogonal multipolar interactions, the distances in the lactam series are too large (> or =4 Angstroms) for attractive dipolar contacts to be effective.

Binding Sites↗

Regio- and diastereoselective synthesis of bis- and tetrakisadducts of C70 by directed remote functionalization using Tröger base tethers.

Double Bingel cyclopropanation of C70 with bismalonates featuring Tröger base derivatives as chiral spacers afforded bisadducts with almost perfect regio- and stereoselectivity. The excellent directing property of these rigidly folded spacers in the remote functionalization of the higher fullerene was further highlighted by the selective formation of a product with a novel bisaddition pattern involving the C(7)-C(22) and C(33)-C(34) bonds of C70. Enantiomerically pure bisadducts of C70 were prepared by highly diastereoselective transformations of bismalonates incorporating optically pure Tröger base tethers. The absolute configuration of these bisadducts was established by comparison of circular dichroism (CD) spectra with data reported in the literature. For the first time, optically active tetrakisadducts of a fullerene were prepared by two sequential chiral-spacer-controlled remote functionalizations.

Journal Article↗

Donor-substituted 1,1,4,4-tetracyanobutadienes (TCBDS): new chromophores with efficient intramolecular charge-transfer interactions by atom-economic synthesis.

A wide variety of monomeric and oligomeric, donor-substituted 1,1,4,4-tetracyanobutadienes (TCBDs) have been synthesized by [2+2] cycloaddition between tetracyanoethylene (TNCE) and donor-substituted alkynes, followed by electrocyclic ring opening of the initially formed cyclobutenes. Reaction yields are often nearly quantitative but can be affected by the electron-donating power and steric demands of the alkyne substituents. The intramolecular charge-transfer (CT) interactions between the donor and TCBD acceptor moieties were comprehensively investigated by X-ray crystallography, electrochemistry, UV-visible spectroscopy, and theoretical calculations. Despite the nonplanarity of the new chromophores, which have a substantial twist between the two dicyanovinyl planes, efficient intramolecular CT interactions are observed, and the crystal structures demonstrate a high quinoid character in strong donor substituents, such as N,N-dimethylanilino (DMA) rings. The maxima of the CT bands shift bathochromically upon reduction of the amount of conjugative coupling between strong donor and acceptor moieties. Each TCBD moiety undergoes two reversible, one-electron reduction steps. Thus, a tri-TCBD derivative with a 1,3,5-trisubstituted benzene core shows six reversible reduction steps within an exceptionally narrow potential range of 1.0 V. The first reduction potential E(red,1) is strongly influenced by the donor substitution: introduction of more donor moieties causes an increasingly twisted TCBD structure, a fact that results in the elevation of the LUMO level and, consequently, a more difficult first reduction. The potentials are also strongly influenced by the nature of the donor residues and the extent of donor-acceptor coupling. A careful comparison of electrochemical data and the correlation with UV-visible spectra made it possible to estimate unknown physical parameters such as the E(red,1) of unsubstituted TCBD (-0.31 V vs Fc+/Fc) as well as the maxima of highly broadened CT bands. Donor-substituted TCBDs are stable molecules and can be sublimed without decomposition. With their high third-order optical nonlinearities, as revealed in preliminary measurements, they should become interesting chromophores for ultra-thin film formation by vapor deposition techniques and have applications in opto-electronic devices.

Journal Article↗

First asymmetric synthesis of a differentially silyl-protected tris(alkynyl)methyl methyl ether.

For an improved synthesis of the recently described expanded octamethoxycubane with a central C56 core, formally obtained by inserting buta-1,3-diynediyl moieties into all C(sp3)-C(sp3) bonds of octamethoxycubane, the preparation of the optically pure methyl ether of a differentially silyl-protected trispropargylic alcohol was required. The key step of the preparation involved a diastereoselective addition of a lithium acetylide to an optically active alkynyl ketone under Cram chelation control.

Journal Article↗

Semipreparative enantioseparation of Tröger base derivatives by HPLC.

We describe the enantioseparation of functionalized derivatives of the Tröger base by HPLC on commercially available chiral stationary phases. Cellulose-derived Chiralcel OJ and brush-type Whelk O1 are demonstrated to be complementary to each other in their scope. On the basis of the results obtained, the separation of selected compounds was successfully transferred onto semipreparative columns. We believe that the availability of enantiopure functionalized derivatives of the Tröger base will stimulate the further use of this interesting molecular scaffold in molecular recognition, asymmetric catalysis, and related areas of research and technology.

Journal Article↗

Bisubstrate inhibitors of catechol O-methyltransferase (COMT): the crucial role of the ribose structural unit for inhibitor binding affinity.

Inhibition of the enzyme catechol O-methyltransferase offers a therapeutic handle to regulate the catabolism of catecholamine neurotransmitters, providing valuable assistance in the treatment of CNS disorders such as Parkinson's disease. A series of ribose-modified bisubstrate inhibitors of COMT featuring 2'-deoxy-, 3'-deoxy-, 2'-aminodeoxy-3'-deoxy-, and 2'-deoxy-3'-aminodeoxyribose-derived central moieties and analogues containing the carbocyclic skeleton of the natural product aristeromycin were synthesized and evaluated to investigate the molecular recognition properties of the ribose binding site in the enzyme. Key synthetic intermediates in the ribose-derived series were obtained by deoxygenative [1,2]-hydride shift rearrangement of adenosine derivatives; highlights in the synthesis of carbocyclic aristeromycin analogues include a diastereoselective cyclopropanation step and nucleobase introduction with a modified Mitsunobu protocol. In vitro biological evaluation and kinetic studies revealed dramatic effects of the ribose modification on binding affinity: 3'-deoxygenation of the ribose gave potent inhibitors (IC50 values in the nanomolar range), which stands in sharp contrast to the remarkable decrease in potency observed for 2'-deoxy derivatives (IC50 values in the micromolar range). Aminodeoxy analogues were only weakly active, whereas the change of the tetrahydrofuran skeleton to a carbocycle unexpectedly led to a complete loss of biological activity. These results confirm that the ribose structural unit of the bisubstrate inhibitors of COMT is a key element of molecular recognition and that modifications thereof are delicate and may lead to surprises.

Catechol O-Methyltransferase↗

A fluorine scan at the catalytic center of thrombin: C--F, C--OH, and C--OMe bioisosterism and fluorine effects on pKa and log D values.

A series of 16 tricyclic thrombin inhibitors was prepared by using the 1,3-dipolar cycloaddition of azomethine ylides derived from 3- or 4-hydroxyproline and 4-bromobenzaldehyde, with N-(4-fluorobenzyl)maleimide as the key step. The terminal pyrrolidine ring of the inhibitors was systematically substituted to explore the potential bioisosteric behavior of C-F, C-OH, and C-OMe residues pointing into the environment of the catalytic center of a serine protease. X-ray crystal structure analyses revealed a distinct puckering preference of this ring. Substitution by F, HO, and MeO has a strong effect on the basicity of the adjacent pyrrolidine nitrogen center which originates from two sigma-inductive pathways between this center and the electronegative O and F atoms. gem-Difluorination decreases the pKa value of this tertiary amine center to <2, making the conjugated ammonium ion a moderately strong acid. Unexpectedly, F substitution next to the nitrogen center reduced the lipophilicity of the ligands, as revealed by measurements of the logarithmic partition coefficient log D. The biological assays showed that all compounds are thrombin inhibitors with activities between Ki=0.08 and 2.17 microM. Bioisosteric behavior of F, HO, and MeO substituents was observed. Their electronegative F and O atoms undergo energetically similar polar interactions with positively polarized centers, such as the N atom of His 57 which is hydrogen bonded to the catalytic Ser 195. However, for energetically similar polar interactions of C-F, C-OH, and C-OMe to occur, sufficient space is necessary for the accommodation of the Me group of the C-OMe residue, and a H-bond acceptor must be present to prevent unfavorable desolvation of the C-OH residue.

Catalytic Domain↗