Biomedical subjects

Françoise Peyrin

Publications and source records attributed to Françoise Peyrin.

15 recordsLinked to original sources

PubMed2007

SEM and 3D synchrotron radiation micro-tomography in the study of bioceramic scaffolds for tissue-engineering applications.

Different biomaterials have been proposed as scaffolds for the delivery of cells and/or biological molecules to repair or regenerate damaged or diseased bone tissues. Particular attention is being given to porous bioceramics that mimic trabecular bone chemistry and structure. Chemical composition, density, pore shape, pore size, and pore interconnection are elements that have to be considered to improve the efficiency of these biomaterials. Commonly, two-dimensional (2D) systems of analysis such as scanning electron microscope (SEM) are used for the characterization and comparison of the scaffolds. Unfortunately, these systems do not allow a complete investigation of the three-dimensional (3D) spatial structure of the scaffold. In this study, we have considered two different techniques, that is, SEM and 3D synchrotron radiation (SR) micro-CT to extract information on the geometry of two hydroxyapatite (HA) bioceramics with identical chemical composition but different micro-porosity, pore size distribution, and pore interconnection pathway. The two scaffolds were obtained with two different procedures: (a) sponge matrix embedding (scaffold FB), and (b) foaming (scaffold EP). Both scaffolds showed structures suitable for tissue-engineering applications, but scaffold EP appeared superior with regard to interconnection of pores, surface on which the new bone could be deposited, and percentage of volume available to bone deposition.

Bone Substitutes↗

PubMed2006

Evaluation of fetal bone structure and mineralization in IGF-I deficient mice using synchrotron radiation microtomography and Fourier transform infrared spectroscopy.

The role of insulin like growth factor-I (IGF-I) during pre-natal development has not been evaluated in detail. However, the high degree of growth retardation and peri-natal mortality in IGF-I deficient mouse models indicates that it plays a critical role during this time. Techniques to assess the structure and quality of bone in small animal fetuses could be beneficial in better understanding its role in bone metabolism and skeletal development. Synchrotron microtomography (SR-microCT) and Fourier transform infrared spectroscopy (FTIR) may provide methods to visualize and quantify differences in the structure and mineral density of bone in small animal fetuses. Tibia and spine from IGF-I deficient and wildtype fetal mice (18th day gestation) were imaged using SR-microCT. Three-dimensional structural indices and the degree of mineralization were determined for each sample. Mineralization was also assessed using FTIR and von Kossa staining. Bone volume was systematically lower in IGF-I -/- animals (tibia: -15%, p<0.05) while both sites were found to have a more rod-like architecture (24%, p<0.05; 113%, p<0.01) and lower trabecular separation (-16%, p<0.05; -21%, p<0.05). These structural results were mostly consistent with those seen in adult models of IGF-I deficiency. The degree of mineralization as measured by SR-microCT was higher in the IGF-I tibial metaphysis (11.7%, p<0.0001), while FTIR of the whole bone showed mineralization to be lower in the knockout group (-11%, p<0.05). Interestingly, von Kossa staining revealed no mineral content in the IGF-I -/- spinal ossification center while SR-microCT clearly indicated the presence of highly attenuating components, if somewhat lower in IGF-I -/- animals (-2.2%, p<0.05). This indicates that IGF-I deficiency is linked to subtle differences in the mineral environment and mineralization progression. The advantages unique to SR-microCT allow for 3D visualization and quantification of pre-natal bone microstructure and mineral density in mice which was not previously possible.

Animals↗

PubMed2006

Assessment of bone structure and acoustic impedance in C3H and BL6 mice using high resolution scanning acoustic microscopy.

Two hundred-MHz time-resolved scanning acoustic microscopy was applied for the investigation of acoustic and structural bone properties of mice from two inbred strains. Transverse sections of femur taken from 5 C57BL/6J@Ico and 5 C3H/HeJ@Ico mice were explored. Both strains had the same bone diameter, but the C3H/HeJ@Ico mice had greater cortical thickness, smaller cancellous diameter, and greater acoustic impedance values than C57BL/6J@Ico mice. The strong differences in the measured acoustic impedances among the two inbred strains indicate that the impedance is a good parameter to detect genetic variations of the skeletal phenotype in small animal models.

Animals↗

PubMed2006

Derivation of elastic stiffness from site-matched mineral density and acoustic impedance maps.

200 MHz acoustic impedance maps and site-matched synchrotron radiation micro computed tomography (SR-muCT) maps of tissue degree of mineralization of bone (DMB) were used to derive the elastic coefficient c(33) in cross sections of human cortical bone. To accomplish this goal, a model was developed to relate the DMB accessible with SR-muCT to mass density. The formulation incorporates the volume fractions and densities of the major bone tissue components (collagen, mineral and water), and accounts for tissue porosity. We found that the mass density can be well modelled by a second-order polynomial fit to DMB (R(2) = 0.999) and appears to be consistent with measurements of many different types of mineralized tissues. The derived elastic coefficient c(33) correlated more strongly with the acoustic impedance (R(2) = 0.996) than with mass density (R(2) = 0.310). This finding suggests that estimates of c(33) made from measurements of the acoustic impedance are more reliable than those made from density measurements. Mass density and elastic coefficient were in the range between 1.66 and 2.00 g cm(-3) and 14.8 and 75.4 GPa, respectively. Although SAM inspection is limited to the evaluation of carefully prepared sample surfaces, it provides a two-dimensional quantitative estimate of elastic tissue properties at the tissue level.

Acoustics↗

PubMed2006

Relevance of 2D radiographic texture analysis for the assessment of 3D bone micro-architecture.

Although the diagnosis of osteoporosis is mainly based on dual x-ray absorptiometry, it has been shown that trabecular bone micro-architecture is also an important factor in regard to fracture risk. In vivo, techniques based on high-resolution x-ray radiography associated to texture analysis have been proposed to investigate bone micro-architecture, but their relevance for giving pertinent 3D information is unclear. Thirty-three calcaneus and femoral neck bone samples including the cortical shells (diameter: 14 mm, height: 30-40 mm) were imaged using 3D-synchrotron x-ray micro-CT at the ESRF. The 3D reconstructed images with a cubic voxel size of 15 microm were further used for two purposes: (1) quantification of three-dimensional trabecular bone micro-architecture, (2) simulation of realistic x-ray radiographs under different acquisition conditions. The simulated x-ray radiographs were then analyzed using a large variety of texture analysis methods (co-occurrence, spectral density, fractal, morphology, etc.). The range of micro-architecture parameters was in agreement with previous studies and rather large, suggesting that the population was representative. More than 350 texture parameters were tested. A small number of them were selected based on their correlation to micro-architectural morphometric parameters. Using this subset of texture parameters, multiple regression allowed one to predict up to 93% of the variance of micro-architecture parameters using three texture features. 2D texture features predicting 3D micro-architecture parameters other than BV/TV were identified. The methodology proposed for evaluating the relationships between 3D micro-architecture and 2D texture parameters may also be used for optimizing the conditions for radiographic imaging. Further work will include the application of the method to physical radiographs. In the future, this approach could be used in combination with DXA to refine osteoporosis diagnosis.

Algorithms↗

PubMed2005

Three-dimensional simulation of ultrasound propagation through trabecular bone structures measured by synchrotron microtomography.

Three-dimensional numerical simulations of ultrasound transmission were performed through 31 trabecular bone samples measured by synchrotron microtomography. The synchrotron microtomography provided high resolution 3D mappings of bone structures, which were used as the input geometry in the simulation software developed in our laboratory. While absorption (i.e. the absorption of ultrasound through dissipative mechanisms) was not taken into account in the algorithm, the simulations reproduced major phenomena observed in real through-transmission experiments in trabecular bone. The simulated attenuation (i.e. the decrease of the transmitted ultrasonic energy) varies linearly with frequency in the MHz frequency range. Both the speed of sound (SOS) and the slope of the normalized frequency-dependent attenuation (nBUA) increase with the bone volume fraction. Twenty-five out of the thirty-one samples exhibited negative velocity dispersion. One sample was rotated to align the main orientation of the trabecular structure with the direction of ultrasonic propagation, leading to the observation of a fast and a slow wave. Coupling numerical simulation with real bone architecture therefore provides a powerful tool to investigate the physics of ultrasound propagation in trabecular structures. As an illustration, comparison between results obtained on bone modelled either as a fluid or a solid structure suggested the major role of mode conversion of the incident acoustic wave to shear waves in bone to explain the large contribution of scattering to the overall attenuation.

Algorithms↗

PubMed2005

Bone microstructure and elastic tissue properties are reflected in QUS axial transmission measurements.

Accurate clinical interpretation of the sound velocity derived from axial transmission devices requires a detailed understanding of the propagation phenomena involved and of the bone factors that have an impact on measurements. In the low megahertz range, ultrasonic propagation in cortical bone depends on anisotropic elastic tissue properties, porosity and the cortical geometry (e.g., thickness). We investigated 10 human radius samples from a previous biaxial transmission study using a 50-MHz scanning acoustic microscope (SAM) and synchrotron radiation microcomputed tomography. The relationships between low-frequency axial transmission sound speed at 1 and 2 MHz, structural properties (cortical width Ct.Wi, porosity, Haversian canal density and material properties (acoustic impedance, mineral density) on site-matched cross-sections were investigated. Significant linear multivariate regression models (1 MHz: R(2) = 0.84, p < 10(-4), root-mean-square error (RMSE) = 38 m/s, 2 MHz: R(2) = 0.65, p < 10(-4), RMSE = 48 m/s) were found for the combination of Ct.Wi with porosity and impedance. A new model was derived that accounts for the nonlinear dispersion relation with Ct.Wi and predicts axial transmission velocities measured at different ultrasonic frequencies (R(2) = 0.69, p < 10(-4), RMSE = 52 m/s).

Aged↗

PubMed2004

Accuracy of 3D MR microscopy for trabecular bone assessment: a comparative study on calcaneus samples using 3D synchrotron radiation microtomography.

Magnetic resonance (MR) imaging is attractive for a noninvasive and radiation-free assessment of in vivo trabecular bone architecture. However the quantitative evaluation of architectural parameters could be biased by the limited sensitivity of MR. The aim of this study was to determine the accuracy of trabecular bone architectural parameters obtained from 3D high-resolution MR images, by comparison to reference images obtained by high-resolution X-ray microtomography using synchrotron radiation, from 29 samples of human calcaneus. MR images were obtained with a 66 microm x 66 microm x 66 microm voxel size, using a 8.5 T MR microscope. Microtomography images were acquired with a 10 microm x 10 microm x 10 mum voxel size, from the same samples. 3D architectural parameters characterizing the morphometry, topology, anisotropy, and orientation were computed from both modalities and carefully compared. To avoid errors, an identical region of interest was selected in the two corresponding images, and the same algorithms were run at identical spatial resolution. Our results establish that network connectivity, orientation and anisotropy are reliable from the MR data. The bone volume fraction, and morphometric parameters measured from the MR data, were found to be biased with respect to their values from the microtomography data, although there was a significant correlation between the two modalities.

Aged↗

PubMed2004

An in vitro study of the ultrasonic axial transmission technique at the radius: 1-MHz velocity measurements are sensitive to both mineralization and intracortical porosity.

UNLABELLED: The ultrasonic axial transmission technique allows for investigating skeletal sites such as the cortical layer of long bones (radius, tibia, phalanges). Using synchrotron radiation microCT, we investigated, in vitro, the relationships between 1-MHz axial transmission SOS measurements at the radius and site-matched measurements of C.Th, POR, MIN, and vBMD. INTRODUCTION: The ultrasonic axial transmission technique allows for investigating skeletal sites such as the cortical layer of long bones (radius, tibia, phalanges). MATERIALS AND METHODS: Using synchrotron radiation microCT, we investigated, in vitro, the relationships between 1-MHz axial transmission speed of sound (SOS) measurements at the radius and site-matched measurements of cortical thickness (C.Th), intracortical porosity (POR), tissue mineralization (MIN), and volumetric BMD (vBMD). SOS measurements were based on bidirectional axial transmission and were performed with a 1-MHz proprietary probe on 39 excised human radii. RESULTS: The highest correlations between SOS values and bone parameters (R(2)(SOS/POR) = 0.28, p < 10(-3); R(2)(SOS/MIN) = 0.38, p < 10(-4); R(2)(SOS/vBMD) = 0.57, p < 10(-3)) were found for bone parameters assessed in a 1-mm-thick periosteal region of the cortex rather than throughout the whole cortex. The observed moderate correlation between SOS and C.Th values (R(2)(SOS/C.Th) = 0.20, p < 10(-2)) disappeared when controlled for other variables. The two best multilinear predictive models, including either BMD alone or the pair of dependent variables MIN and POR (all assessed in the periosteal cortex), were equally accurate in predicting SOS values (R(2)(SOS/(POR,MIN)) = 0.59, p < 10(-5); R(2)(SOS/vBMD) = 0.57, p < 10(-5)). CONCLUSION: For the first time, the respective adjusted contributions of POR (-24 m/s%(-1)) and tissue mineralization (+3.5 m/s/mg/cm(-3)) to SOS values were assessed. These results suggest potential sensitivity of axial transmission SOS values to changes in cortical bone status under different pathological conditions or treatments affecting POR and/or tissue mineralization.

Aged↗

PubMed2004

Cortical bone in the human femoral neck: three-dimensional appearance and porosity using synchrotron radiation.

UNLABELLED: A high-resolution CT system using synchrotron radiation allowed visualization of the 3D cortical bone microarchitecture and measurement of intracortical porosity of femoral neck cortical bone specimens from 19 female cadavers imaged at 10.13-microm resolution. 3D reconstruction of specimens showed osteonal system arrangement. Mean porosity was 15.88%. This technique will provide insights into the mechanisms involved in osteoporotic hip fractures. INTRODUCTION: The purpose of this study was to show that a high-resolution CT system using synchrotron radiation (SR) allows visualization of the 3D cortical bone microarchitecture of the human femoral neck and quantification of intracortical porosity. MATERIALS AND METHODS: Bone specimens from the inferior femoral neck were obtained from 19 female cadavers with no hip fracture (mean, 86.9 +/- 8.3 years). The specimens, consisting of embedded approximately 7 x 7 x 12-mm cortical bone parallelepipeds, were imaged using SR at 10.13-microm resolution. Commercial software was used to visualize both the 660 x 660 x 660-voxel volumes and the 2D axial slices through each volume. Qualitative examination of 2D axial slices focused on the appearance of the vessel canal system, presence of small bright zones (fully mineralized tissue) in the osseous matrix, and presence of cracks. A method was developed to automatically measure 3D intracortical porosity after separating pure bone from pores and cortical bone from trabecular bone. RESULTS AND CONCLUSIONS: 3D reconstruction of the specimens showed the entire structure and arrangement of the osteonal systems, parallel to the axis of the femoral neck. Bright zones were seen in the outer cortex. No cracks were observed. Porosity values varied widely from 4.96% to 38.87% (mean, 15.88 +/- 9.87%). This study establishes that SR microtomography can be used to display the 3D bone microstructure of the human femoral neck cortex and to quantify intracortical porosity. This technique will provide insights into the mechanisms involved in cortical bone loss and osteoporotic hip fractures.

Aged↗

PubMed2003

Nonseparable wavelet-based cone-beam reconstruction in 3-D rotational angiography.

In this paper, we propose a new wavelet-based reconstruction method suited to three-dimensional (3-D) cone-beam (CB) tomography. It is derived from the Feldkamp algorithm and is valid for the same geometrical conditions. The demonstration is done in the framework of nonseparable wavelets and requires ideally radial wavelets. The proposed inversion formula yields to a filtered backprojection algorithm but the filtering step is implemented using quincunx wavelet filters. The proposed algorithm reconstructs slice by slice both the wavelet and approximation coefficients of the 3-D image directly from the CB projection data. The validity of this multiresolution approach is demonstrated on simulations from both mathematical phantoms and 3-D rotational angiography clinical data. The same quality is achieved compared with the standard Feldkamp algorithm, but in addition, the multiresolution decomposition allows to apply directly image processing techniques in the wavelet domain during the inversion process. As an example, a fast low-resolution reconstruction of the 3-D arterial vessels with the progressive addition of details in a region of interest is demonstrated. Other promising applications are the improvement of image quality by denoising techniques and also the reduction of computing time using the space localization of wavelets.

Algorithms↗

PubMed2003

Prediction of backscatter coefficient in trabecular bones using a numerical model of three-dimensional microstructure.

A model of ultrasonic backscattering for cancellous bone saturated by water is proposed. This model assumes that scattering is caused by the solid trabeculae and describes the cancellous bone as a weak scattering medium. The backscatter coefficient is related to the spatial Fourier transform of bone microarchitecture and to the density and compressibility fluctuations between the solid trabeculae and the saturating fluid. The computations of the model make use of three-dimensional numerical images of bone microarchitecture, obtained by tomographic reconstructions with a 10 microm spatial resolution. With this model, the predictions of the frequency dependence and of the magnitude of the backscatter coefficient are reasonably accurate. The theoretical predictions are compared to experimental data obtained on 19 specimens. An accuracy error of approximately 1 dB was found (difference between the averaged experimental values and theoretical predictions). One limit of the model may come from inaccurate values of trabecular bone characteristics needed for the computations (density and longitudinal velocity), which are yet to be precisely determined for human trabecular bone. However, the model is only slightly sensitive to variations of bone material properties. It was found that an accuracy error of 2.2 dB at maximum resulted from inaccurate a priori values of bone material properties. A computation of the elastic mean free path in the medium suggests that multiple scattering plays a minor role in the working frequency bandwidth (0.4-1.2 MHz). It follows from these results that a weak scattering medium model may be appropriate to describe scattering from trabecular bone.

Aged↗

PubMed2003

Excised bone structures in mice: imaging at three-dimensional synchrotron radiation micro CT.

Bone microarchitecture and mineralization were determined at three-dimensional synchrotron radiation micro computed tomography in two inbred mice strains. Distal metaphysis of the left femur was imaged in three dimensions at 6.65 microm, whereas the right femur was analyzed with histomorphometry. Three-dimensional quantitative parameters of trabecular and cortical bone architecture were computed. C3H/HeJ@Ico mice had greater bone density and thicker trabeculae; greater cortical bone density, cortical thickness, and porosity; and greater mineralization than did C57BL/6J@Ico mice. The technique is well suited for assessment of trabecular and cortical bone in small animals and at the same time provides mineralization status in three dimensions.

Animals↗

PubMed2002

Segmentation of cancellous bone from high-resolution computed tomography images: influence on trabecular bone measurements.

The quantification of cancellous bone network from computed tomography (CT) images requires a segmentation step which is crucial and difficult because of the partial volume effect in CT images. In this paper, we present and evaluate a new approach for segmenting cancellous bone network from high-resolution CT (HRCT) slices. The idea is first to detect a skeleton from the crest lines of the structure and then to thicken it to extract the whole bone structure by satisfying local neighborhood constraints. The segmentation requires the adjustment of relative and not absolute parameters like most methods. We quantified the influence of these parameters on architectural measurements. Results were first validated by using a physical phantom and then examined on a series of 12 HRCT images of human lumbar vertebra of different ages. We demonstrated that the choice of segmentation parameters yielded important variability on architectural measurements (up to 20%), but less variability than a more commonly used approach. This stresses the importance of settle on the segmentation parameters for once, which is possible with the proposed method.

Adult↗

PubMed2002

Quantification of the degree of mineralization of bone in three dimensions using synchrotron radiation microtomography.

The availability of three-dimensional measuring techniques coupled to specific image processing methods opens new opportunities for the analysis of bone structure. In particular, synchrotron radiation microtomography may provide three-dimensional images with spatial resolution as high as one micrometer. Moreover, the use of a monoenergetic synchrotron beam, which avoids beam-hardening effects, allows quantitative measurements of the degree of mineralization in bone samples. Indeed, the reconstructed gray levels of tomographic images correspond directly to a map of the linear attenuation coefficient within the sample. Since the absorption depends on the amount of mineral content, we proposed a calibration method to evaluate the three-dimensional distribution of the degree of mineralization within the sample. First a theoretical linear relationship modeling the linear attenuation coefficient as a function of the hydroxyapatite concentrations was derived. Then, an experimental validation on phantoms confirmed both the accuracy of the image processing tools and the experimental setup used. Finally, the analysis of the degree of mineralization in four iliac crest bone biopsy samples was reported. Our method was compared to the reference microradiography technique, currently used for this quantification in two dimensions. The concentration values of the degree of mineralization were found with both techniques in the range 0.5-1.6 g of mineral per cubic centimeter of bone, both in cortical and in trabecular region. The mean difference between the two techniques was around 4.7%, and was slightly higher in trabecular region than in cortical bone.

Bone Density↗