Biomedical subjects

Frank A Gomez

Publications and source records attributed to Frank A Gomez.

11 recordsLinked to original sources

PubMed2006

Partial-filling affinity capillary electrophoresis techniques to probe the binding of glycopeptide antibiotics to D-Ala-D-Ala terminus peptides.

This work is an overview of our use of affinity capillary electrophoresis (ACE) to estimate binding constants between D-Ala-D-Ala terminus peptides and the glycopeptides vancomycin (Van) from Streptomyces orientalis, teicoplanin (Teic) from Actinoplanes teicomyceticus, and ristocetin A (Rist) from Nocardia lurida. In these studies, modifications in the ACE technique, including partial-filling ACE (PFACE), flow-through PFACE (FTPFACE), on-column ligand derivatization ACE (OCLDACE), on-column receptor derivatization ACE (OCRDACE), multiple-step ligand injection PFACE (MSLIPFACE), and multiple-injection ACE (MIACE), are described and used to determine binding constants of peptides to antibiotics. The findings described herein demonstrate the advantages of ACE in estimating binding parameters between antibiotics and small peptides over other analytical techniques.

Anti-Bacterial Agents↗

PubMed2005

Multiple-injection affinity capillary electrophoresis to examine binding constants between glycopeptide antibiotics and peptides.

Multiple-injection affinity capillary electrophoresis (MIACE) was used to determine binding constants (K(b)) between vancomycin, ristocetin, and teicoplanin from Streptomyces orientalis, Nocardia lurida, and Actinoplanes teichomyceticus, respectively, and fluorenylmethoxycarbonyl (Fmoc)-(Gly, Ala, Val, and Phe)-D-Ala-D-Ala peptides. In this technique, separate plugs of sample containing non-interacting standards, peptide one, buffer, and peptide two, were injected into the capillary column and electrophoresed. Peptides migrate through the column at similar electrophoretic mobilities but remain as distinct zones due to the buffer plug between peptides. The electrophoresis is then carried out in an increasing concentration of antibiotic in the running buffer. Continued electrophoresis results in a shift in the migration time of the peptides upon binding to the antibiotic. Analysis of the change in the relative migration time ratio (RMTR) of the resultant complexes relative to the non-interacting standards, as a function of the concentration of antibiotic yields a value for K(b). MIACE is a versatile technique that can be used to measure affinity constants between ligands of similar relative molecular mass and charge without the need of separate binding experiments. The findings described, herein, demonstrate the advantages of using MIACE to estimate binding parameters between ligands and receptors.

Electrophoresis, Capillary↗

PubMed2005

Multiple-injection affinity capillary electrophoresis to estimate binding constants of receptors to ligands.

Multiple-injection affinity capillary electrophoresis (MIACE) is used to determine binding constants (Kb) between receptors and ligands using as model systems vancomycin and teicoplanin from Streptomyces orientalis and Actinoplanes teichomyceticus, respectively, and their binding to D-Ala-D-Ala peptides and carbonic anhydrase B (CAB. EC 4.2.1.1) and the binding of the latter to arylsulfonamides. A sample plug containing a non-interacting standard is first injected followed by multiple plugs of sample containing the receptor and then a final injection of sample containing a second standard. Between each injection of sample, a small plug of buffer is injected which contains an increasing concentration of ligand to effect separation between the multiple injections of sample. Electrophoresis is then carried out in an increasing concentration of ligand in the running buffer. Continued electrophoresis results in a shift in the migration time of the receptor in the sample plugs upon binding to their respective ligand. Analysis of the change in the relative migration time ratio (RMTR) or electrophoretic mobility (mu) of the resultant receptor-ligand complex relative to the non-interacting standards, as a function of the concentration of ligand yields a value for Kb. The MIACE technique is a modification in the ACE method that allows for the estimation of binding affinities between biological interactions on a timescale faster than that found for standard ACE. In addition sample volume requirements for the technique are reduced compared to traditional ACE assays. These findings demonstrate the advantage of using MIACE to estimate binding parameters between receptors and ligands.

Carbonic Anhydrase I↗

PubMed2004

Estimation of binding constants for the substrate and activator of Rhodobacter sphaeroides adenosine 5'-diphosphate-glucose pyrophosphorylase using affinity capillary electrophoresis.

Binding constants were determined for the activator fructose-6-phosphate (F6P) and substrate adenosine 5'-triphosphate (ATP) (in the presence and absence of F6P) to the recombinant wild-type (WT) Rhodobacter sphaeroides adenosine 5'-diphosphate-(ADP)-glucose pyrophosphorylase (ADPGlc PPase) using affinity capillary electrophoresis (ACE). In these binding studies, the capillary is initially injected with a plug of sample containing ADPGlc PPase and noninteracting standards. The sample is then subjected to increasing concentrations of F6P or ATP in the running buffer and electrophoresed. Analysis of the change in the migration times of ADPGlc PPase, relative to those of the noninteracting standards, as a function of the varying concentration of F6P or ATP yields a binding constant. The values obtained were in good agreement with kinetic parameters obtained from steady state activity assays. The method was extended to examine the F6P binding constants for the R33A and R22A enzymes and the ATP binding constants for the R8A enzyme in the presence and absence of F6P. The R33A enzyme has been shown by activity assays to be insensitive to F6P activation, indicating a defect in binding or in downstream transmission of the allosteric signal required for full activation. ACE indicated no apparent binding of F6P, supporting the former hypothesis. The R22A enzyme was shown by activity assays to have a approximately 15-fold decrease in apparent affinity for F6P compared to that of WT while ACE indicated an affinity comparable to that of WT; potential reasons for this discrepancy are discussed. The R8A enzyme as measured by activity assays exhibits reduced fold-activation by F6P compared to that of WT but increased apparent affinity for ATP in the presence of F6P. The ACE results were in good agreement with the activity assay data, confirming the increased affinity for ATP in the presence of F6P. This method demonstrates the quantitative ability of ACE to study different binding sites/ligand interactions in allosteric enzymes.

Adenosine Triphosphate↗

PubMed2004

Estimation of binding constants between ristocetin and teicoplanin and peptides using on-column ligand derivatization coupled to affinity capillary electrophoresis.

This work utilizes on-column ligand synthesis and affinity capillary electrophoresis (ACE) to determine binding constants ( K(b)) of 9-flourenylmethyloxy carbonyl (Fmoc)-amino acid derivatives to the glycopeptide antibiotics ristocetin (Rist) and teicoplanin (Teic). In this technique, two separate plugs of sample are injected on to the capillary column and electrophoresed. The initial sample plug contains a D-Ala- D-Ala terminus peptide and either one or two non-interacting standard(s). The second plug contains a Fmoc-amino acid- N-hydroxysuccinimide (NHS) ester. The electrophoresis is then carried out with an increasing concentration of Rist or Teic in the running buffer. Upon electrophoresis the initial D-Ala- D-Ala peptide reacts with the Fmoc-amino acid yielding a new Fmoc-amino acid- D-Ala- D-Ala peptide derivative. Continued electrophoresis results in the binding of Rist or Teic to the Fmoc-amino acid- D-Ala- D-Ala peptide derivatives. Analysis of the change in the relative migration time ratio ( RMTR) or electrophoretic mobility (mu) of the Fmoc-amino acid- D-Ala- D-Ala peptide derivatives relative to the non-interacting standards, as a function of the concentration of Rist and Teic, yields a value for K(b). These findings demonstrate the advantage of coupling on-column ligand synthesis to ACE for estimating binding parameters between antibiotics and ligands.

Amino Acids↗

PubMed2004

On-column synthesis coupled to affinity capillary electrophoresis for the determination of binding constants of peptides to glycopeptide antibiotics.

Binding constants of the glycopeptide antibiotics teicoplanin (Teic), ristocetin (Rist), and vancomycin (Van), and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column ligand and receptor synthesis coupled to affinity capillary electrophoresis (ACE) or partial filling ACE (PFACE). In the first technique, 9-fluorenylmethoxycarbonyl (Fmoc)-amino acid-D-Ala-D-Ala species are first synthesized using on-column techniques. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and buffer, respectively. Upon electrophoresis, the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the glycopeptide in the running buffer and the plug of Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Subsequent analysis of the change in the electrophoretic mobility (mu) or relative migration time ratio (RMTR) of the peptide relative to the non-interacting standards, as a function of the concentration of the antibiotic, yields a value for the binding constant. In the second technique, derivatives of the glycopeptides Teic and Rist are first synthesized on-column before analysis by ACE or PFACE. After the column has been partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides, a plug of buffer followed by two separate plugs of reagents are injected. The order of the reagent plugs containing the antibiotic and two non-interacting standards and the anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in RMTR of the new glycopeptide relative to the non-interacting standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant.

Anti-Bacterial Agents↗

PubMed2004

Affinity capillary electrophoresis to examine receptor-ligand interactions.

Afffinity capillary electrophoresis (ACE) is a new analytical technique that has been shown to be an efficient and accurate tool in studying biomolecular noncovalent interactions and determining binding and dissociation constants of formed complexes. ACE uses as its basis the change in migration time of a receptor upon binding to a ligand found in the electrophoresis buffer. Subsequent Scatchard analysis using noninteracting markers realizes a binding constant. Herein, ACE and three modifications in the technique, partial-filling ACE (PFACE), flow through PFACE (FTPFACE), and multiple-step ligand injection ACE (MSLIACE) are used to probe the binding of ristocetin A (Rist A) and vancomycin (Van) from Streptomyces orientalis to D-Ala-D-Ala terminus peptides and carbonic anhydrase B (CAB, E.C.4.2.1.1) to arylsulfonamides.

Anti-Bacterial Agents↗

PubMed2003

Partial-filling affinity capillary electrophoresis.

Partial-filling affinity capillary electrophoresis (PFACE) is used to examine the binding interactions between two model biological systems: D-Ala-D-Ala terminus peptides to the glycopeptide antibiotic vancomycin (Van) from Streptomyces orientalis, and arylsulfonamides to carbonic anhydrase B (CAB, EC 4.2.1.1, bovine erythrocytes). Using these two systems, modifications in the PFACE technique are demonstrated including flow-through PFACE (FTPFACE), competitive flow-through PFACE (CFTPFACE), on-column ligand synthesis PFACE (OCLSPFACE), and multiple-step ligand injection PFACE (MSLIPFACE). In PFACE small plugs of sample are injected into the capillary column and an equilibrium is established between receptor and ligand during electrophoresis. Binding constants are then obtained by Scatchard analysis using changes in the migration time of the receptor/ligand on changing the concentration of the ligand/receptor. Data demonstrating the quantitative potential of these methods are presented. This review focuses on the unique capabilities of the different PFACE techniques as applied to two model biological systems.

Carbonic Anhydrase I↗

PubMed2003

On-column derivatization of the antibiotics teicoplanin and ristocetin coupled to affinity capillary electrophoresis.

Binding constants between the glycopeptides teicoplanin (Teic) and ristocetin (Rist) and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column receptor synthesis coupled to partial-filling affinity capillary electrophoresis (PFACE) or affinity capillary electrophoresis (ACE). In these techniques, the column is first partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides. This is followed by plugs of buffer, antibiotic and two noninteracting standards, and acetic and/or succinic anhydride (and buffer in the case of ACE). The order of the reagent plugs containing the antibiotic and anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in the relative migration time ratio (RMTR) of the new glycopeptide relative to the standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant K(b). The techniques described here can be used to assess how the derivatization of drugs alters their affinities for target molecules.

Acetic Anhydrides↗

PubMed2003

Flow-through partial-filling affinity capillary electrophoresis can estimate binding constants of neutral ligands to receptors via a competitive assay technique.

This work evaluates the use of a competitive binding assay using flow-through partial-filling affinity capillary electrophoresis (FTPFACE) to estimate binding constants of neutral ligands to a receptor. We demonstrate this technique using, as a model system, carbonic anhydrase B (CAB, EC 4.2.1.1) and arylsulfonamides. In this technique, the capillary is first partially filled with a negatively charged ligand, a sample containing CAB and two noninteracting standards, and a neutral ligand, then electrophoresed. Upon application of a voltage the sample plug migrates into the plug of negatively charged ligand (L(-)) resulting in the formation of a CAB-L(-) complex. Continued electrophoresis results in mixing between the neutral ligand (L(0)) and the CAB-L(-) complex. L(0) successfully competes out L(-) to form the new CAB-L(0) complex. Analysis of the change in the relative migration time ratio (RMTR) of CAB relative to the noninteracting standards, as a function of neutral ligand concentration, yields a value for the binding constant. These values are in agreement with those estimated using other binding and ACE techniques. Data demonstrating the quantitative potential of this method is presented.

Binding, Competitive↗

PubMed2002

On-column enzyme-catalyzed microreactions using capillary electrophoresis: quantitative studies.

Capillary electrophoresis and on-column enzyme-catalyzed microreactor techniques were used to quantitate the reaction projects resulting from three model systems: i) the conversion of nicotinamide adenine dinucleotide (NAD) to nicotinamide adenine dinucleotide, reduced form (NADH) in the oxidation of glucose-6-phosphate (glc-6-p) to 6-phosphogluconate by glucose-6-phosphate dehydrogenase (G6PDH, EC 1.1.1.49); ii) the conversion of adenosine triphosphate (ATP) to adenosine diphosphate (ADP) and adenosine monophosphate (AMP) by hexokinase (HK, EC 2.7.1.1) and apyrase (APY, EC 3.6.1.5), respectively, in the conversion of glucose to glucose-6-phosphate and inorganic phosphate, respectively, and; iii) the conversion of fructose-1,6-bisphosphate to dihydroxyacetone phosphate and glyceraldehyde-3-phosphate by fructose-biphosphate aldolase (ALD, EC 4.1.2.13). Single and double microreactor techniques employing direct or indirect detection were used to follow the conversion of substrate to product(s). In addition, electrophoresis conditions including voltage, enzyme concentration, and mixing time of the reaction, were correlated to product distribution profiles.

Adenosine Diphosphate↗