PubMed Health⌕ Search

Biomedical subjects

Fraser A Armstrong

Publications and source records attributed to Fraser A Armstrong.

33 records · Page 2Linked to original sources

Hydrogenases: active site puzzles and progress.

Recent research on the hydrogenase reactions has sought to probe beyond the information that is provided by X-ray diffraction structures. The major challenge of locating 'transient' hydrogen atoms in species that are potential catalytic intermediates is being addressed, using advanced electron paramagnetic resonance (EPR) techniques and theoretical methods. This article discusses recent progress towards a consensus on the structures of different states of the active site of hydrogenases, the mechanisms of activation and hydrogen cycling.

Binding Sites↗

Instantaneous, stoichiometric generation of powerfully reducing states of protein active sites using Eu(II) and polyaminocarboxylate ligands.

Addition of an equivalent of a polyaminocarboxylate ligand (L) to a solution of a redox protein and the aqua Eu2+ ion results in the instantaneous in situ generation of a very powerful reductant Eu(II)-L that can rapidly drive an electron stoichiometrically onto a redox centre having an extremely negative reduction potential (lower than -1 V): this is exemplified by straightforward generation of the super-reduced state of the Fe-protein of nitrogenase.

Azotobacter vinelandii↗

Mechanisms of redox-coupled proton transfer in proteins: role of the proximal proline in reactions of the [3Fe-4S] cluster in Azotobacter vinelandii ferredoxin I.

The 7Fe ferredoxin from Azotobacter vinelandii (AvFdI) contains a [3Fe-4S](+/0) cluster that binds a single proton in its reduced level. Although the cluster is buried, and therefore inaccessible to solvent, proton transfer from solvent to the cluster is fast. The kinetics and energetics of the coupled electron-proton transfer reaction at the cluster have been analyzed in detail by protein-film voltammetry, to reveal that proton transfer is mediated by the mobile carboxylate of an adjacent surface residue, aspartate-15, the pK of which is sensitive to the charge on the cluster. This paper examines the role of a nearby proline residue, proline-50, in proton transfer and its coupling to electron transfer. In the P50A and P50G mutants, a water molecule has entered the cluster binding region; it is hydrogen bonded to the backbone amide of residue-50 and to the Asp-15 carboxylate, and it is approximately 4 A from the closest sulfur atom of the cluster. Despite the water molecule linking the cluster more directly to the solvent, proton transfer is not accelerated. A detailed analysis reveals that Asp-15 remains a central part of the mechanism. However, the electrostatic coupling between cluster and carboxylate is almost completely quenched, so that cluster reduction no longer induces such a favorable shift in the carboxylate pK, and protonation of the base no longer induces a significant shift in the pK of the cluster. The electrostatic coupling is crucial for maintaining the efficiency of proton transfer both to and from the cluster, over a range of pH values.

Amino Acid Substitution↗

Enzyme electrokinetics: using protein film voltammetry to investigate redox enzymes and their mechanisms.

Protein film voltammetry is a relatively new approach to studying redox enzymes, the concept being that a sample of a redox protein is configured as a film on an electrode and probed by a variety of electrochemical techniques. The enzyme molecules are bound at the electrode surface in such a way that there is fast electron transfer and complete retention of the chemistry of the active site that is observed in more conventional experiments. Modulations of the electrode potential or catalytic turnover result in the movement of electrons to, from, and within the enzyme; this is detected as a current that varies in characteristic ways with time and potential. Henceforth, the potential dimension is introduced into enzyme kinetics. The presence of additional intrinsic redox centers for providing fast intramolecular electron transfer between a buried active site and the protein surface is an important factor. Centers which carry out cooperative two-electron transfer, most obviously flavins, produce a particularly sharp signal that allows them to be observed, even as transient states, when spectroscopic methods are not useful. High catalytic activity produces a large amplification of the current, and useful information can be obtained even if the coverage on the electrode is low. Certain enzymes display optimum activity at a particular potential, and this can be both mechanistically informative and physiologically relevant. This paper outlines the principles of protein film voltammetry by discussing some recent results from this laboratory.

Binding Sites↗

Enzyme electrokinetics: electrochemical studies of the anaerobic interconversions between active and inactive states of Allochromatium vinosum [NiFe]-hydrogenase.

The cycling between active and inactive states of the catalytic center of [NiFe]-hydrogenase from Allochromatium vinosum has been investigated by dynamic electrochemical techniques. Adsorbed on a rotating disk pyrolytic graphite "edge" electrode, the enzyme is highly electroactive: this allows precise manipulations of the complex redox chemistry and facilitates quantitative measurements of the interconversions between active catalytic states and the inactive oxidized form Ni(r) (also called Ni-B or "ready") as functions of pH, H(2) partial pressure, temperature, and electrode potential. Cyclic voltammograms for catalytic H(2) oxidation (current is directly related to turnover rate) are highly asymmetric (except at pH > 8 and high temperature) due to inactivation being much slower than activation. Controlled potential-step experiments show that the rate of oxidative inactivation increases at high pH but is independent of potential, whereas the rate of reductive activation increases as the potential becomes more negative. Indeed, at 45 degrees C, activation takes just a few seconds at -288 mV. The cyclic asymmetry arises because interconversion is a two-stage reaction, as expected if the reduced inactive Ni(r)-S state is an intermediate. The rate of inactivation depends on a chemical process (rearrangement and uptake of a ligand) that is independent of potential, but sensitive to pH, while activation is driven by an electron-transfer process, Ni(III) to Ni(II), that responds directly to the driving force. The potentials at which fast activation occurs under different conditions have been analyzed to yield the potential-pH dependence and the corresponding entropies and enthalpies. The reduced (active) enzyme shows a pK of 7.6; thus, when a one-electron process is assumed, reductive activation at pH < 7 involves a net uptake of one proton (or release of one hydroxide), whereas, at pH > 8, there is no net exchange of protons with solvent. Activation is favored by a large positive entropy, consistent with the release of a ligand and/or relaxation of the structure around the active site.

Chromatiaceae↗

Voltammetry of a "protein on a rope".

A periplasmic electron-transfer protein, cytochrome c(555)(m) from Aquifex aeolicus contains a 62-residue N-terminal extension by which it is anchored to the membrane--most probably via a thioester bond to its N-terminal cysteine. This linker can act as a "rope" to tether the protein close to its reaction partners. Mimicking this principle, a recombinant cytochrome c(555)(m), expressed in Escherichia coli, has been attached covalently to a gold electrode modified with 6-mercaptohexan-1-ol. The "tethered" cytochrome c(555)(m) displays remarkably fast electron-transfer kinetics, with an electrochemical exchange rate constant k(0) of 1.4 x 10(4) s(-1). The results show that fast electron transfer is associated with weak interactions: importantly, the tethered cytochrome can explore many different orientations without escaping into solution.

Adsorption↗

Enzyme electrokinetics: hydrogen evolution and oxidation by Allochromatium vinosum [NiFe]-hydrogenase.

The mechanism of catalytic hydrogen evolution and oxidation by Allochromatium vinosum [NiFe]-hydrogenase has been studied by protein film voltammetry (PFV) with the enzyme adsorbed at a pyrolytic graphite edge electrode. By analyzing the entire shapes of catalytic voltammograms, the energetics of the catalytic cycles (reduction potentials and acidity constants of the active states), including the detailed profiles of activity against pH and the sequences of proton and electron transfers, have been determined, and these are discussed with respect to the mechanism. PFV, which probes rates as a continuous function of the electrochemical potential (i.e., in the "potential domain"), is proven to be an invaluable tool for determining the redox properties of an active site in the presence of its substrate, at room temperature, and during turnover. This is especially relevant in the case of the active states of hydrogenase, since one of its substrates (the proton) is always present at significant levels in the titration medium at physiological pH values.

Binding Sites↗

A voltammetric study of interdomain electron transfer within sulfite oxidase.

Protein film voltammetry of chicken liver sulfite oxidase (SO) bound at the pyrolytic graphite "edge" or modified gold electrodes shows that catalytic electron transport is controlled by the inherent electrochemical characteristics of the heme b domain and conformational changes that allow intramolecular electron transfer with the molybdenum active site. In the absence of sulfite, a single nonturnover electrochemical signal is observed at +90 mV (vs SHE) that is assigned to heme b. In the presence of sulfite, this signal transforms into a catalytic wave at similar potential. The shape and negligible pH dependence of this wave indicate that catalytic turnover is controlled by the one-electron transfers through heme b. The smaller turnover numbers obtained in this experiment (k(cat) approximately 2-4 s(-1), as compared to 100 s(-1) in solution) suggest that only a small fraction of SO is bound at the electrode in a manner that permits the conformational change necessary for fast interdomain electron transfer.

Catalysis↗

Detection and interpretation of redox potential optima in the catalytic activity of enzymes.

It is no surprise that the catalytic activity of electron-transport enzymes may be optimised at certain electrochemical potentials in ways that are analogous to observations of pH-rate optima. This property is observed clearly in experiments in which an enzyme is adsorbed on an electrode surface which can supply or receive electrons rapidly and in a highly controlled manner. In such a way, the rate of catalysis can be measured accurately as a function of the potential (driving force) that is applied. In this paper, we draw attention to a few examples in which this property has been observed in enzymes that are associated with membrane-bound respiratory chains, and we discuss its possible origins and implications for in vivo regulation.

Animals↗

Electron-transfer mechanisms through biological redox chains in multicenter enzymes.

A new approach for studying intramolecular electron transfer in multicenter enzymes is described. Two fumarate reductases, adsorbed on an electrode in a fully active state, have been studied using square-wave voltammetry as a kinetic method to probe the mechanism of the long-range electron transfer to and from the buried active site. Flavocytochrome c(3) (Fcc(3)), the globular fumarate reductase from Shewanella frigidimarina, and the soluble subcomplex of the membrane-bound fumarate reductase of Escherichia coli (FrdAB) each contain an active site FAD that is redox-connected to the surface by a chain of hemes or Fe-S clusters, respectively. Using square-wave voltammetry with large amplitudes, we have measured the electron-transfer kinetics of the FAD cofactor as a function of overpotential. The results were modeled in terms of the FAD group receiving or donating electrons either via a direct mechanism or one involving hopping via the redox chain. The FrdAB kinetics could be described by both models, while the Fcc(3) data could only be fit on the basis of a direct electron-transfer mechanism. This raises the likelihood that electron transfer can occur via a superexchange mechanism utilizing the heme groups to enhance electronic coupling. Finally, the FrdAB data show, in contrast to Fcc(3), that the maximum ET rate at high overpotential is related to the turnover number for FrdAB measured previously so that electron transfer is the limiting step during catalysis.

Benzoquinones↗

Crystal structures of ferredoxin variants exhibiting large changes in [Fe-S] reduction potential.

Elucidating how proteins control the reduction potentials (E0') of [Fe--S] clusters is a longstanding fundamental problem in bioinorganic chemistry. Two site-directed variants of Azotobacter vinelandii ferredoxin I (FdI) that show large shifts in [Fe--S] cluster E0' (100--200 mV versus standard hydrogen electrode (SHE)) have been characterized. High resolution X-ray structures of F2H and F25H variants in their oxidized forms, and circular dichroism (CD) and electron paramagnetic resonance (EPR) of the reduced forms indicate that the overall structure is not affected by the mutations and reveal that there is no increase in solvent accessibility nor any reorientation of backbone amide dipoles or NH--S bonds. The structures, combined with detailed investigation of the variation of E0' with pH and temperature, show that the largest increases in E0' result from the introduction of positive charge due to protonation of the introduced His residues. The smaller (50--100 mV) increases observed for the neutral form are proposed to occur by directing a Hdelta+--Ndelta- dipole toward the reduced form of the cluster.

Azotobacter vinelandii↗

Azotobacter vinelandii ferredoxin I: a sequence and structure comparison approach to alteration of [4Fe-4S]2+/+ reduction potential.

The reduction potential (E(0)') of the [4Fe-4S](2+/+) cluster of Azotobacter vinelandii ferredoxin I (AvFdI) and related ferredoxins is approximately 200 mV more negative than the corresponding clusters of Peptostreptococcus asaccharolyticus ferredoxin and related ferredoxins. Previous studies have shown that these differences in E(0)' do not result from the presence or absence of negatively charged surface residues or in differences in the types of hydrophobic residues found close to the [4Fe-4S](2+/+) clusters. Recently, a third, quite distinct class of ferredoxins (represented by the structurally characterized Chromatium vinosum ferredoxin) was shown to have a [4Fe-4S](2+/+) cluster with a very negative E(0)' similar to that of AvFdI. The observation that the sequences and structures surrounding the very negative E(0)' clusters in quite dissimilar proteins were almost identical inspired the construction of three additional mutations in the region of the [4Fe-4S](2+/+) cluster of AvFdI. The three mutations, V19E, P47S, and L44S, that incorporated residues found in the higher E(0)' P. asaccharolyticus ferredoxin all led to increases in E(0)' for a total of 130 mV with a 94-mV increase in the case of L44S. The results are interpreted in terms of x-ray structures of the FdI variants and show that the major determinant for the large increase in L44S is the introduction of an OH-S bond between the introduced Ser side chain and the Sgamma atom of Cys ligand 42 and an accompanying movement of water.

Amino Acid Sequence↗

The pH-dependent redox inactivation of amicyanin from Paracoccus versutus as studied by rapid protein-film voltammetry.

The redox properties of the blue copper protein amicyanin have been studied with slow and fast scan protein-film cyclic voltammetry. At slow scan rates, which reveal the thermodynamics of the redox reactions, the reduction potential of amicyanin depends on pH in a sigmoidal manner, and the data can be analysed in terms of electron transfer being coupled to a single protonatable group with pKa(red)=6.3 and pKa(ox) < or = 3.2 at 22 degrees C. Voltammetry at higher scan rates reveals the kinetics and shows that the low-pH reduced form of amicyanin is not oxidised directly; instead, oxidation occurs only after conversion to the high-pH form. Simulations show that this conversion, which gates the electron transfer, occurs with a rate constant >750 s-1 at 25 degrees C. In order to decrease the rate of the coupled reaction, the experiments were performed at 0 degrees C, at which the rate constant for this conversion was determined to be 35 +/- 20 s-1. Together with evidence from NMR, the results lead to a mechanism involving protonation and dissociation of the copper coordinating histidine-96 in the reduced form.

Bacterial Proteins↗