PubMed Health⌕ Search

Biomedical subjects

Fritz E Kühn

Publications and source records attributed to Fritz E Kühn.

13 recordsLinked to original sources

MTO Schiff-base complexes: synthesis, structures and catalytic applications in olefin epoxidation.

Several Schiff-base ligands readily form complexes with methyltrioxorhenium(VII) (MTO) by undergoing a hydrogen transfer from a ligand-bound OH group to a ligand N atom. The resulting complexes are stable at room temperature and can be handled and stored in air without problems. Due to the steric demands of the ligands they display distorted trigonal-bipyramidal structures in the solid state, as shown by X-ray crystallography, with the O(-) moiety binding to the Lewis acidic Re atom and the Re-bound methyl group being located either in cis or trans position to the Schiff base. In solution, however, the steric differences seem not to be maintained, as can be deduced from (17)O NMR spectroscopy. Furthermore, the Schiff-base ligands exchange with donor ligands. Nevertheless, the catalytic behaviour is influenced significantly by the Schiff bases coordinated to the MTO moiety, which lead either to high selectivities and good activities or to catalyst decomposition. A large excess of ligand, in contrast to the observations with aromatic N-donor ligands, is detrimental to the catalytic performance as it leads to catalyst decomposition.

Journal Article↗

Grafting of cyclopentadienyl ruthenium complexes on aminosilane linker modified mesoporous SBA-15 silicates.

Cyclopentadienyl ruthenium phosphane and carbene complexes are grafted on the surface of mesoporous SBA-15 molecular sieves through an aminosilane linker. The nature of the support after the grafting is examined by powder XRD, TEM and N(2) adsorption/desorption analysis. Elemental analysis, FT-IR, DRIFTS, TG-MS and MAS-NMR studies confirm the successful grafting of the complexes on the surface. The grafted materials are applied for catalytic aldehyde olefination and cyclopropanation.

Journal Article↗

Olefin epoxidation with tert-butyl hydroperoxide catalyzed by MoO2X2L complexes: a DFT mechanistic study.

DFT calculations suggest that the catalytic epoxidation of olefins by Mo(vi) complexes, modeled by MoO2Br2(MeN=C(H)-C(H)=NMe), in the presence of MeOOH, the model for tert-butyl hydroperoxide, starts with a hydrogen transfer from the peroxide to one of the terminal Mo=O oxygen atoms and the remaining MeOO anion binds as a seventh ligand, forming a five-membered Mo-O(alpha)-O(beta)(Me)...H-O-Mo ring held together by a hydrogen bond. In the second step, a concerted approach of ethylene to the Mo-O(alpha) bond gives rise to an intermediate containing a seven-membered Mo-C-C-O(alpha)-O(beta)(Me)...H-O-Mo ring. In the final step, decomposition of the intermediate leads to the starting complex, alcohol and the epoxide. The activation energy for the addition of the olefin (second step) is the highest one, in agreement with available kinetic studies showing that the catalyst formation is not always a rate-limiting step. DFT calculations also show that the alcohol by-product (MeOH) can react with the starting complex, competing with ROOH and hence leading to the progressive catalyst poisoning, which has been observed experimentally.

Alcohols↗

Heterogenization of an organorhenium(VII) oxide on a modified mesoporous molecular sieve.

A novel route to heterogenize an organorhenium(VII) oxide, derived from the well examined methyltrioxorhenium(VII) (MTO), on the surface of an iodosilane-modified MCM-41 is applied. The successful grafting of the -CH(2)-ReO3 moiety on the surface was evidenced by 1H CP MAS NMR, IR spectroscopy, TG-MS, and elemental analysis. XRD and TEM analyses confirm the retaining of long-range ordering throughout the grafting process. The rhenium loading of the mesoporous material after heterogenization of MTO is found to be 1.25 wt%. Despite containing formally a derivative of the very sensitive benzyltrioxorhenium(VII) the material is stable at room temperature and applicable as a heterogeneous catalyst for aldehyde olefination reactions.

Aldehydes↗

Organorhenium(VII) and organomolybdenum(VI) oxides: syntheses and application in olefin epoxidation.

The first members of the classes of the organorhenium(VII) oxides and organomolybdenum(VI) oxides were described during the 1960s and 1970s. However, despite the fact that methyltrioxorhenium(VII)(MTO) is probably the best examined organometallic oxide known, many of its derivatives as well as the Mo congeners were not tested for any application. Nevertheless, it is known that several organomolybdenum oxides, particularly those of formula eta5-(C5R5)MoO2Cl and eta5-(C5R5)MoO2R' are powerful epoxidation catalysts if applied together with tert-butylhydroperoxide (TBHP). MTO catalyzes a broad variety of organic reactions, among them being olefin epoxidation--in this case with the "green" oxidant H2O2- the most thoroughly examined. The heterogenization of the molybdenum compounds as well as of MTO both on carrier materials and in ionic liquids has already been achieved and it is to be expected that a suitable modification of the organic ligands will lead to applications in chiral catalysis in the near future.

Journal Article↗

Oxorhenium complexes as aldehyde-olefination catalysts.

Several oxorhenium compounds in the formal oxidation states V and VII are examined as catalysts for the aldehyde-olefination starting from diazo compounds, phosphines, and aldehydes. Of these, [ReMeO2(eta2-alkyne)] complexes provide the simplest catalysts to study, although [ReOCl3(PPh3)2] still remains the most efficient rhenium catalyst for aldehyde-olefination described to date. Prior to the reaction with the Re catalysts the phosphine and the diazo compound react to form a phosphazine. No catalytic reaction occurs in cases where no phosphazine formation is observed. The first step of the catalytic cycle involves the formation of a carbene intermediate by the reaction of phosphazine and catalyst under extrusion of phosphine oxide and dinitrogen. In a second step the carbene reacts with aldehyde under olefin formation and catalyst regeneration. Excess of alkyne as well as the presence of ketones slows down the catalytic reaction. The olefination of 4-nitrobenzaldehyde with diazomalonate is possible with these Re catalysts. In contrast, this reaction does not take place either in the classical Wittig fashion from Ph3P=C(CO2Et)2 and aldehyde or by use of all other catalysts for aldehyde olefination reactions reported to date. Catalytic ylide formation from diazo compounds seems therefore not to be the only pathway through which catalytic aldehyde-olefination reactions can proceed.

Journal Article↗

Solvent-ligated manganese(II) complexes for the homopolymerization of isobutene and the copolymerization of isobutene and isoprene.

Polyisobutenes with a high content of terminal olefinic groups can be synthesized by using manganese(II) initiators in homogeneous solution. These easily accessible complexes initiate the polymerization at room temperature and above, and afford highly reactive, gel-free polyisobutenes with high viscosities. Furthermore, the initiators were successfully used for the copolymerization of isobutene with isoprene. The high activities of the Mn(II) initiators seem to be related to their weakly coordinating nitrile ligands, which are easily displaced by substrate molecules. Replacing the nitrile ligands by other more strongly coordinating ligands such as water reduces the initiator activity significantly. The Mn(II) initiators are surprisingly resistant to temperature.

Journal Article↗

Heterogenisation of CpMo(CO)3Cl on mesoporous materials and its application as olefin epoxidation catalyst.

CpMo(CO)(3)Cl reacts with the hydroxyl (Si-OH or Si-OH-Al) functionalities of mesoporous molecular sieves such as MCM-41, MCM-48 and its aluminium analogues during grafting. XRD, N(2) adsorption-desorption, BET surface area analysis and TEM show the resulting samples as being well ordered and maintaining a uniform pore size. FT-IR spectra, elemental analysis, (13)C and (29)Si CP MAS NMR spectra confirm the successful grafting. In the presence of excess TBHP the materials show high activity in cyclooctene epoxidation and good stability.

Alkenes↗

(Eta2-alkyne)methyl(dioxo)rhenium complexes as aldehyde-olefination catalysts.

Complexes CH3ReO2L (L = 2-butyne, 3-hexyne, diphenylacetylene) are catalysts for the olefination of aldehydes, using 4-nitrobenzaldehyde (4-nba) as the standard aldehyde and ethyldiazoacetate (eda) as the diazo compound. Spectroscopic studies including in situ 31P, 17O, 13C, and 1H NMR spectroscopy are used to elucidate the mechanism and the nature of the active species. One of the key steps of the mechanism is the rapid formation of phosphazine at the beginning of the cycle and its subsequent reaction with the metal dioxide complex to form the catalytically active carbene species.

Journal Article↗

Synthesis and catalytic application of octahedral lewis base adducts of dichloro and dialkyl dioxotungsten(VI).

Complexes of the composition W(O)(2)(Cl)(2)L(2) and W(O)(2)(R)(2)L(2) (R = Me, Et; L(2) = bidentate Lewis base ligand) have been prepared and are fully characterized (including an exemplary X-ray crystal structure of W(O)(2)(Cl)(2)(4,4'-di-tert-butyl-2,2'-bipyridine)). This latter compound crystallizes in the orthorhombic space group P2(1)2(1)2(1) with a = 8.3198(1) A, b = 13.3224(2) A, c = 18.0415(2) A, and Z = 4. The title complexes are applied as catalysts in olefin epoxidation catalysis with tert-butyl hydroperoxide (TBHP) as the oxidizing agent. The W(VI) complexes display only moderate turnover frequencies but can be reused several times without loss of catalytic activity. The highest activity can be achieved at reaction temperatures of ca. 90 degrees C. Chloro derivatives are somewhat more active than alkyl complexes, and sterically less crowded complexes show also higher activities than their congeners with bulky ligands L(2). Kinetic examinations show that the catalyst formation is the rate determining step and it is observed that tert-butyl alcohol, the byproduct of the epoxidation reaction, acts as a competitor for TBHP, thus lowering the reaction velocity during the course of the reaction but not irreversibly destroying the catalyst.

Journal Article↗

Octahedral bipyridine and bipyrimidine dioxomolybdenum(VI) complexes: characterization, application in catalytic epoxidation, and density functional mechanistic study.

Complexes of the general formula [MoO(2)X(2)L(2)] (X=Cl, Br, Me; L(2)=bipy, bpym) have been prepared and fully characterized, including X-ray crystallographic investigations of all six compounds. Additionally, the highly soluble complex [MoO(2)Cl(2)(4,4'-bis(hexyl)-2,2'-bipyridine)] has been synthesized. The reaction of the complexes with tert-butyl hydroperoxide (TBHP) is an equilibrium reaction, and leads to MoV(I) eta(1)-alkylperoxo complexes that selectively catalyze the epoxidation of olefins. Neither the Mo-X bonds nor the Mo-N bonds are cleaved during this reaction. These experimental results are supported by theoretical calculations, which show that the attack of TBHP at the Mo center through the X-O-N face is energetically favored and the TBHP hydrogen atom is transferred to a terminal oxygen of the Mo=O moiety. After the attack of the olefin on the Mo-bound peroxo oxygen atom, epoxide and tert-butyl alcohol are formed. The latter compound acts as a competitive inhibitor for the TBHP attack, and leads to a significant reduction in the catalytic activity with increasing reaction time.

Journal Article↗