PubMed Health⌕ Search

Biomedical subjects

G A van Arkel

Publications and source records attributed to G A van Arkel.

At least 19 recordsLinked to original sources

Self-cloning in the cyanobacterium Anacystis nidulans R2: fate of a cloned gene after reintroduction.

Functional analysis of cloned genes often makes use of complementation after introducing these genes into cells of a mutant strain. Problems with this self-cloning step in the cyanobacterium Anacystis nidulans R2 have been encountered, which were mainly due to recombinational instability of gene and vector after transformation. Therefore, conditions determining the exchange of material between chromosome, insert and plasmids were studied to achieve the necessary stability. The fate of plasmid pME1, containing a wild-type methionine gene from A. nidulans R2, was investigated after its introduction into a Tn901-induced methionine mutant strain as recipient, so that the mutant chromosomal gene could be distinguished from the plasmid-borne wild-type copy. Two different recipients were constructed, one containing and one lacking the resident plasmid pCH1, which is a derivative of the indigenous small plasmid pUH24. When using the pCH1-free strain and with combined selection for both wild-type gene and vector, the original configuration of the genes in chromosome and vector was retained in the majority of the transformed cells, while the remaining transformants were reciprocal recombinants; under conditions of single selection mainly nonreciprocal recombination or loss of the vector was observed. When the recipient strain contained pCH1 additional recombinational events took place. The results show that under appropriate conditions a chromosomal gene cloned on a plasmid vector can be stably maintained in a majority of the transformants, thus making self-cloning experiments feasible in A. nidulans R2. On the other hand, the introduction of foreign DNA into the chromosome can be achieved by deliberately exploiting recombination between chromosome and plasmid.

Cloning, Molecular↗

Cloning of a third nitrate reductase gene from the cyanobacterium Anacystis nidulans R2 using a shuttle cosmid library.

A strategy for gene cloning in the cyanobacterium Anacystis nidulans R2 was developed which made use of a gene library constructed in a shuttle cosmid vector. The method involved phenotypic complementation of mutants with pooled cosmid DNA. The development of the procedure and its application to the cloning of a third gene involved in nitrate reduction are described.

Bacterial Proteins↗

Cloning of nitrate reductase genes from the cyanobacterium Anacystis nidulans.

Anacystis nidulans, a non-nitrogen-fixing cyanobacterium, can fulfill its nitrogen requirement by the assimilation of nitrate. The first step in the pathway, the reduction of nitrate to nitrite, is catalyzed by the molybdo-protein nitrate reductase. In this study, newly developed techniques for gene cloning in A. nidulans R2 were used for the isolation of two genes involved in nitrate reduction. One gene was cloned by complementation of the corresponding mutant; the other gene was picked up from a cosmid gene library by using a restriction fragment containing the transposon-inactivated gene as a probe. Both genes were unlinked single-copy chromosomal genes. Transformation studies provided evidence for the existence of a third locus involved in nitrate reduction.

Cloning, Molecular↗

Regions of incompatibility in single-stranded DNA bacteriophages phi X174 and G4.

The intracellular presence of a recombinant plasmid containing the intercistronic region between the genes H and A of bacteriophage phi X174 strongly inhibits the conversion of infecting single-stranded phi X DNA to parental replicative-form DNA. Also, transfection with single-stranded or double-stranded phi X174 DNA of spheroplasts from a strain containing such a "reduction" plasmid shows a strong decrease in phage yield. This phenomenon, the phi X reduction effect, was studied in more detail by using the phi X174 packaging system, by which plasmid DNA strands that contain the phi X(+) origin of replication were packaged as single-stranded DNA into phi X phage coats. These "plasmid particles" can transduce phi X-sensitive host cells to the antibiotic resistance coded for by the vector part of the plasmid. The phi X reduction sequence in the resident plasmid strongly affected the efficiency of the transduction process, but only when the transducing plasmid depended on primosome-mediated initiation of DNA synthesis for its conversion to double-stranded DNA. The combination of these results led to a model for the reduction effect in which the phi X reduction sequence interacted with an intracellular component that was present in limiting amounts and that specified the site at which phi X174 replicative-form DNA replication takes place. The phi X reduction sequence functioned as a viral incompatibility element in a way similar to the membrane attachment site model for plasmid incompatibility. In the DNA of bacteriophage G4, a sequence with a similar biological effect on infecting phages was identified. This reduction sequence not only inhibited phage G4 propagation, but also phi X174 infection.

Bacteriophage phi X 174↗

A host-vector system for gene cloning in the cyanobacterium Anacystis nidulans R2.

We describe the construction of a series of vectors suitable for gene cloning in the cyanobacterium Anacystis nidulans R2. From the indigenous plasmid pUH24, derivatives were constructed with streptomycin as the selective marker; one of these plasmids was used to construct pUC303, a shuttle vector capable of replication in A. nidulans R2 as well as in Escherichia coli K12. It has two markers, streptomycin and chloramphenicol resistance, and three unique restriction sites. Instability of recombinant plasmids was overcome by using a derivative of A. nidulans R2 cured of the indigenous plasmid pUH24. This strain, R2-SPc, can be transformed stably and at high frequency by the plasmids described in this paper. The combination of the cured strain R2-SPc and the new plasmid pUC303 serves as a suitable host-vector system for gene cloning in cyanobacteria.

Cloning, Molecular↗

A new approach for molecular cloning in cyanobacteria: cloning of an Anacystis nidulans met gene using a Tn901-induced mutant.

A new strategy for molecular cloning in the cyanobacterium Anacystis nidulans R-2 is described. This strategy involved the use of a transposon and was developed for the cloning of a gene encoding methionine biosynthesis. A met::Tn901 mutant was isolated. Chromosomal DNA fragments were cloned in the Escherichia coli plasmid vector pACYC184. A recombinant plasmid carrying the inactivated met::Tn901 gene was selected after transformation to E. coli. The cloned met::Tn901 DNA fragment was used as a probe to select the corresponding A. nidulans R-2 wild-type met gene from a gene library prepared in E. coli, using the newly constructed shuttle cosmid vector pPUC29. When transformed into A. nidulans Met- mutants, this cloned gene allowed the mutants to grow prototrophically.

Cloning, Molecular↗

Cloned bacteriophage phi X174 DNA sequence interferes with synthesis of the complementary strand of infecting bacteriophage phi X174.

The insertion of a particular phi X DNA sequence in the plasmid pACYC177 strongly decreased the capacity of Escherichia coli cells containing such a plasmid to propagate bacteriophage phi X174. The smallest DNA sequence tested that showed the effect was the HindII fragment R4. This fragment does not code for a complete protein. It contains the sequence specifying the C-terminal part of the gene H protein and the N-terminal part of the gene A protein, as well as the noncoding region between these genes. Analysis of cells that contain plasmids with the "reduction sequence" showed that (i) the adsorption of the phages to the host cells is normal, (ii) in a single infection cycle much less phage is formed, (iii) only 10% of the infecting viral single-stranded DNA is converted to double-stranded replicative-form DNA, and (iv) less progeny replicative form DNA is synthesized. The reduction process is phi X174 specific, since the growth of the related G4 and St-1 phages was not affected in these cells. The effect of the recombinant plasmids on infecting phage DNA shows similarity to the process of superinfection exclusion.

Bacteriophage phi X 174↗

Enzymatic properties of the bacteriophage phi X174 A protein on superhelical phi X174 DNA: a model for the termination of the rolling circle DNA replication.

Incubation of phi X174 replication form I DNA with the A* protein of phi X174 in the presence of MN2+ results in the formation of three different types of DNA molecules: open circular form DNA (RFII), linear form DNA (RFIII) and the relaxed covalently closed form DNA (RFIV). The RFII and RFIII DNAs are shown to be A* protein-DNA complexes by electron microscopy using the protein labeling technique of Wu and Davidson (1). The linear double-stranded RFIII DNA molecule carries at one end a covalently attached A* protein whereas at the other end of the molecule the single-stranded termini are covalently linked to each other. The structure of the RFIII DNA shows its way of formation. The described properties of the A* protein indicate the way the larger A protein functions in the termination step of the rolling-circle type of phi X174 DNA replication.

Bacteriophage phi X 174↗

The nuclease specificity of the bacteriophage phi X174 A* protein.

The A* protein of bacteriophage phi X174 is a single-stranded DNA specific nuclease. It can cleave phi X viral ss DNA in many different places. The position of these sites have been determined within the known phi X174 nucleotide sequence (1). From the sequences at these sites it is clear that the A* protein recognizes and cleaves at sites that show only partial homology with the origin of RF DNA replication in the phi X DNA. Different parts of the origin sequence can be deduced that function as a signal for recognition and cleavage by the A* protein. We conclude that different parts within the DNA recognition domain of the A* protein are functional in the recognition of the origin sequence in single-stranded DNA. The existence of different DNA recognition domains in the A* protein, and therefore also in the A protein, leads to a model that can explain how the A protein performs its multiple function in the phi X174 DNA replication process (2).

Bacteriophage phi X 174↗

Vectors for cloning in cyanobacteria: construction and characterization of two recombinant plasmids capable of transformation of Escherichia coli K12 and Anacystis nidulans R2.

Two plasmids were constructed consisting of the E. coli vector pACYC184 and the cyanobacterial plasmid pUC1. These recombinants, designated pUC104 and pUC105, can be transformed to E. coli K12 as well as to the cyanobacterium Anacystis nidulans R2 and in both hosts they express their antibiotic markers. pUC104 and pUC105 differ with respect to the location and the orientation of the pACYC184 segment in pUC1. pUC104 was found to be stable under all circumstances. Transformation of pUC105 to A. nidulans R2 gave intact plasmids when chloramphenicol was the selective agent, but upon ampicillin selection a deletion derivative was produced identical to pUC1. Further characteristics of pUC104 and pUC105 are described and their usefulness as cloning vectors is discussed.

Chloramphenicol↗

Introduction of transposon Tn901 into a plasmid of Anacystis nidulans: preparation for cloning in cyanobacteria.

We have used the TEM beta-lactamase transposon Tn901, located on Escherichia coli plasmid pRI46, to introduce in vivo a genetic marker into plasmid pUH24, present in the cyanobacterial strain Anacystis nidulans R-2. Restriction enzyme analysis and heteroduplex studies of the 8.3 x 10(6)-dalton plasmids pCH1-pCH5, present in the ampicillin-resistant A. nidulans R-2 colonies obtained after transformation with pRI46, demonstrated that these plasmids consist of the complete sequence of Tn901 inserted at different places into plasmid pUH24. The pUH24::Tn901 recombinant plasmids transform A. nidulans R-2 with a frequency of 10(-4)--10(-5) per microgram of plasmid DNA and contain a single cleavage site for the restriction enzyme Xho I. From pCH1 a plasmid of 5.5 x 10(6) daltons,pUC1, was constructed with only a part of the Tn901 sequence and an additional single cleavage site for the restriction enzyme BamHI. This plasmid, as well as plasmids pCH1-pCH5, are potentially useful as vectors for cloning genes in cyanobacteria and for studying cyanobacterial plasmid biology.

Chromosome Mapping↗