PubMed Health⌕ Search

Biomedical subjects

G Büldt

Publications and source records attributed to G Büldt.

At least 37 records · Page 2Linked to original sources

Immuno-atomic force microscopy of purple membrane.

The atomic force microscope is a useful tool for imaging native biological structures at high resolution. In analogy to conventional immunolabeling techniques, we have used antibodies directed against the C-terminus of bacteriorhodopsin to distinguish the cytoplasmic and extracellular surface of purple membrane while imaging in buffer solution. At forces > or = 0.8 nN the antibodies were removed by the scanning stylus and the molecular topography of the cytoplasmic purple membrane surface was revealed. When the stylus was retracted, the scanned membrane area was relabeled with antibodies within 10 min. The extracellular surface of purple membrane was imaged at 0.7 nm resolution, exhibiting a major and a minor protrusion per bacteriorhodopsin monomer. As confirmed by immuno-dot blot analysis and sodium dodecyl sulfate-gel electrophoresis, labeling of the purple membrane was not observed if the C-terminus of bacteriorhodopsin was cleaved off by papain.

Amino Acid Sequence↗

Functional expression of bacteriorhodopsin in oocytes allows direct measurement of voltage dependence of light induced H+ pumping.

We report on the first successful expression of the light driven H+ pump, bacteriorhodopsin, into the plasma membrane of oocytes from Xenopus laevis. The light induced photocurrents which reflect the pumping of H+ by BR were analysed under voltage clamp conditions. At least 100 active BR molecules per microns 2 were expressed in the plasma membrane so that both the voltage clamp and giant patch clamp method could be applied. We show that H+ pumping by BR is modulated by the membrane potential, i.e. the pump current shows strong voltage dependence in the range measured between -165 mV to +60 mV.

Animals↗

Force-induced conformational change of bacteriorhodopsin.

The cytoplasmic surface topography of purple membranes imaged by the atomic force microscope depends mainly on the force applied to the stylus. Imaged at forces of 300 pN, individual bacteriorhodopsin molecules reveal two domains. The resulting donut-shaped trimers reversibly transform into structures exhibiting three prominent protrusions when scanned at 100 pN. In parallel, the height of the protein moiety above the lipid layer increases from 4 A to 6 A. From the known structure of bacteriorhodopsin it appears that this change may be related to a bending of the most prominent cytoplasmic loop.

Bacteriorhodopsins↗

Imaging purple membranes in aqueous solutions at sub-nanometer resolution by atomic force microscopy.

Purple membranes adsorbed to mica were imaged in buffer solution using the atomic force microscope. The hexagonal diffraction patterns of topographs from the cytoplasmic and the extracellular surface showed a resolution of 0.7 and 1.2 nm, respectively. On the cytoplasmic surface, individual bacteriorhodopsin molecules consistently exhibited a distinct substructure. Depending on the pH value of the buffer solution, the height of the purple membranes decreased from 5.6 nm (pH 10.5) to 5.1 nm (pH 4). The results are discussed with respect to the structure determined by cryo-electron microscopy.

Adsorption↗

Light-induced isomerization causes an increase in the chromophore tilt in the M intermediate of bacteriorhodopsin: a neutron diffraction study.

Bacteriorhodopsin (BR) was regenerated with two selectively deuterated retinals, one with 11 deuterons in the beta-ionone ring (D11) and the other with 5 deuterons (D5) at the end of the polyene chain closest to the Schiff base at carbon atoms C-14, C-15, and C-20. Both label positions (centers of deuteration) were obtained from difference Fourier maps of projections onto the plane of the membrane by neutron diffraction at 90 K, both in the light-adapted ground-state BR568 and in the photocycle intermediate M412. To retard the decay of M412, purple membrane films were soaked in 0.1 M or 1 M guanidine hydrochloride at pH 9.6. M412 was produced by illuminating oriented membrane films at physiological temperature (278 K), followed by rapid cooling to 90 K in the absence of light. The results show that in the projected structure the ring position is unaltered during the transition from BR568 to M412, whereas the position of the D5 label shifts by 1.4 +/- 0.9 A toward the ring. The shortened interlabel distance in the projected structure for the M412 state implies that as a result of the all-trans/13-cis isomerization, the C-5 to C-13 part of the polyene chain tilts out of the plane of the membrane toward the cytoplasm by about 11 degrees +/- 6 degrees. Pairwise comparison of data sets with the same retinal for the two photocycle states M412 and BR568 leads to four difference-density maps for the protein, which are in agreement with previous work. They show changes in the protein density near helices G and F.

Bacteriorhodopsins↗

Photoactive mitochondria: in vivo transfer of a light-driven proton pump into the inner mitochondrial membrane of Schizosaccharomyces pombe.

The light-driven proton pump bacteriorhodopsin (bR) from Halobacterium salinarium has been genetically transferred into the inner mitochondrial membrane (IM) of the eukaryotic cell Schizosaccharomyces pombe, where the archaebacterial proton pump replaces or increases the proton gradient usually formed by the respiratory chain. For targeting and integration, as well as for the correct orientation of bR in the IM, the bacterioopsin gene (bop) was fused to signal sequences of IM proteins. Northern and Western blot analysis proved that all hybrid gene constructs containing the bop gene and a mitochondrial signal sequence were expressed and processed to mature bR. Fast transient absorption spectroscopy showed photocycle activity of bR integrated in the IM by formation of the M intermediate. Experiments with the pH-sensitive fluorescence dye 2',7'-bis(2-carboxyethyl)-5 (and -6)-carboxyfluorescein revealed bR-mediated proton pumping from the mitochondrial matrix into the intermembrane space. Glucose uptake measurements under anaerobic conditions showed that yeast cells containing photoactive mitochondria need less sugar under illumination. In summary, our experiments demonstrate the functional genetic transfer of a light energy converter to a naturally nonphotoactive eukaryotic organism.

Bacteriorhodopsins↗

The archaebacterial membrane protein bacterio-opsin is expressed and N-terminally processed in the yeast Saccharomyces cerevisiae.

The bop gene codes for the membrane protein bacterio-opsin (BO), which on binding all-trans-retinal, constitutes the light-driven proton pump bacteriorhodopsin (BR) in the archaebacterium Halobacterium salinarium. This gene was cloned in a yeast multi-copy vector and expressed in Saccharomyces cerevisiae under the control of the constitutive ADH1 promoter. Both the authentic gene and a modified form lacking the precursor sequence were expressed in yeast. Both proteins are incorporated into the membrane in S. cerevisiae. The presequence is thus not required for membrane targeting and insertion of the archaebacterial protein in budding yeast, or in the fission yeast Schizosaccharomyces pombe, as has been shown previously. However, in contrast to S. pombe transformants, which take on a reddish colour when all-trans-retinal is added to the culture medium as a result of the in vivo regeneration of the pigment, S. cerevisiae cells expressing BO do not take on a red colour. The precursor of BO is processed to a protein identical in size to the mature BO found in the purple membrane of Halobacterium. The efficiency of processing in S. cerevisiae is dependent on growth phase, as well as on the composition of the medium and on the strain used. The efficiency of processing of BR is reduced in S. pombe and in a retinal-deficient strain of H. salinarium, when retinal is present in the medium.

Alcohol Dehydrogenase↗

Bacteriorhodopsin expressed in Schizosaccharomyces pombe pumps protons through the plasma membrane.

Bacterioopsin (bO) from Halobacterium salinarium ("Halobacterium halobium") has been functionally expressed in a heterologous system, the fission yeast Schizosaccharomyces pombe. Regeneration of bO to bacteriorhodopsin (bR) in S. pombe has been achieved in vivo by addition of the chromophore retinal to the culture medium, as shown for a retinal-negative mutant of H. salinarium (JW5). Western blot analysis revealed that bR is more stable than bO against proteolysis in fission yeast and also in JW5. The light-driven proton pump is expressed in the eukaryotic organism and incorporated into the plasma membrane. Illumination of intact yeast cells leads to acidification of the external medium due to the translocation of H+ from inside to outside of the cell, indicating the same orientation of bR in the yeast plasma membrane as in H. salinarium. The kinetics of proton release into the water phase was observed with the optical pH indicator pyranine. Time-resolved absorbance changes of isolated plasma membrane measured by flash spectroscopy showed rise and decay of the M intermediate during the photocycle similar to those in the homologous system. Photocurrents and photovoltages were recorded with yeast plasma membrane attached to a planar lipid membrane and to a polytetrafluoroethylene (Teflon) film, respectively. Stationary currents measured in the presence of a protonophore showed continuous pumping activity of bR. The action spectrum of the photocurrent and the kinetics of the photovoltage were analyzed and compared with signals obtained from purple membranes. From all these different investigations we conclude that the integral membrane protein bR is correctly folded in vivo into the cytoplasmic membrane of the fission yeast S. pombe.

Bacteriorhodopsins↗

Time-resolved X-ray diffraction study of structural changes associated with the photocycle of bacteriorhodopsin.

The time course of structural changes accompanying the transition from the M412 intermediate to the BR568 ground state in the photocycle of bacteriorhodopsin (BR) from Halobacterium halobium was studied at room temperature with a time resolution of 15 ms using synchrotron radiation X-ray diffraction. The M412 decay rate was slowed down by employing mutated BR Asp96Asn in purple membranes at two different pH-values. The observed light-induced intensity changes of in-plane X-ray reflections were fully reversible. For the mutated BR at neutral pH the kinetics of the structural alterations (tau 1/2 = 125 ms) were very similar to those of the optical changes characterizing the M412 decay, whereas at pH 9.6 the structural relaxation (tau 1/2 = 3 s) slightly lagged behind the absorbance changes at 410 nm. The overall X-ray intensity change between the M412 intermediate and the ground state was about 9% for the different samples investigated and is associated with electron density changes close to helix G, B and E. Similar changes (tau 1/2 = 1.3-3.6 s), which also confirm earlier neutron scattering results on the BR568 and M412 intermediates trapped at -180 degrees C, were observed with wild type BR retarded by 2 M guanidine hydrochloride (pH 9.4). The results unequivocally prove that the tertiary structure of BR changes during the photocycle.

Bacteriorhodopsins↗

Light- and dark-adapted bacteriorhodopsin, a time-resolved neutron diffraction study.

Recently, neutron diffraction experiments have revealed well-resolved and reversible changes in the protein conformation of bacteriorhodopsin (BR) between the light-adapted ground state and the M-intermediate of the proton pumping photocycle (Dencher, Dresselhaus, Zaccai and Büldt (1989) Proc. Natl. Acad. Sci. USA 86, 7876-7879). These changes are triggered by the light-induced isomerization of the chromophore retinal from the all-trans to the 13-cis configuration. Dark-adapted purple membranes contain a mixture of two pigment species with either the all-trans- or 13-cis-retinal isomer as chromophore. Employing a time-resolved neutron diffraction technique, no changes in protein conformation in the resolution regime of up to 7 A are observed during the transition between the two ground-state species 13-cis-BR and all-trans-BR. This is in line with the fact that the conversion of all-trans BR to 13-cis-BR involves an additional isomerization about the C15 = N Schiff's base bond, which in contrast to M formation minimizes retinal displacement and keeps the Schiff's base in the original protein environment. Furthermore, there is no indication for large-scale redistribution of water molecules in the purple membrane during light-dark adaptation.

Bacteriorhodopsins↗

Water molecules and exchangeable hydrogen ions at the active centre of bacteriorhodopsin localized by neutron diffraction. Elements of the proton pathway?

Neutron diffraction is used to localize water molecules and/or exchangeable hydrogen ions in the purple membrane by H2O/2H2O exchange experiments at different values of relative humidity. At 100% relative humidity, differences in the hydration between protein and lipid areas are observed, accounting for an excess amount of about 100 molecules of water in the lipid domains per unit cell. A pronounced isotope effect was observed, reproducibly showing an increase in the lamellar spacing from 60 A in 2H2O to 68 A in H2O. At 15% relative humidity, the positions of exchangeable protons became visible. A dominant difference density peak corresponding to 11 +/- 2 exchangeable protons was detected in the central part of the projected structure of bacteriorhodopsin at the Schiff's base end of the chromophore. A difference density map obtained from data on purple membrane films at 15% relative humidity in 2H2O, and the same sample after complete drying in vacuum, revealed that about eight of these protons belong to four water molecules. This is direct evidence for tightly bound water molecules close to the chromophore binding site of bacteriorhodopsin, which could participate in the active steps of H+ translocation as well as in the proton pathway across this membrane protein.

Bacteriorhodopsins↗

Densely packed beta-structure at the protein-lipid interface of porin is revealed by high-resolution cryo-electron microscopy.

Porin is an integral membrane protein that forms channels across the outer membrane of Escherichia coli. Electron microscopic studies of negatively stained two-dimensional porin crystals have shown three stain accumulations per porin trimer, revealing the locations of pores spanning the membrane. In this study, reconstituted porin lattices embedded in glucose were investigated using the low-dose technique on a cryo-electron microscope equipped with a helium-cooled superconducting objective lens. The specimen temperature was maintained at 5 K to yield an improved microscopic and specimen stability. Under these conditions, we obtained for the first time electron diffraction patterns from porin lattices to a resolution of 3.2 A and images showing optical diffraction up to a resolution of 4.9 A. Applying correlation averaging techniques to the digitized micrographs, we were able to reconstruct projected images of the porin trimer to a resolution of up to 3.5 A. In the final projection maps, amplitudes from electron diffraction and phases from these images were combined. The predominant feature is a high-density narrow band (about 6 A in thickness) that delineates the outer perimeter of the trimer. Since the molecule consists of almost exclusively beta-sheet structure, as revealed by spectroscopic data, we conclude that this band is a cylindrical beta-pleated sheet crossing the membrane nearly perpendicularly to its plane. Another intriguing finding is a low-density area (about 70 A2) situated in the centre of the trimer.

Bacterial Outer Membrane Proteins↗

Topography of surface-exposed amino acids in the membrane protein bacteriorhodopsin determined by proteolysis and micro-sequencing.

The topography of membrane-surface-exposed amino acids in the light-driven proton pump bacteriorhodopsin (BR) was studied. By limited proteolysis of purple membrane with papain or proteinase K, domains were cleaved, separated by SDS-PAGE, and electroblotted onto polyvinylidene difluoride (PVDF) membranes. Fragments transferred were sequenced in a gas-phase sequencer. Papain cleavage sites at Gly-65, Gly-72, and Gly-231, previously only deduced from the apparent molecular weight of the digestion fragments, could be confirmed by N-terminal micro-sequencing. By proteinase K, cleavage occurred at Gln-3, Phe-71, Gly-72, Tyr-131, Tyr-133, and Ser-226, i.e., in regions previously suggested to be surface-exposed. Additionally, proteinase-K cleavage sites at Thr-121 and Leu-127 were identified, which are sites predicted to be in the alpha-helical membrane-spanning segment D. Our results, especially that the amino acids Gly-122 to Tyr-133 are protruding into the aqueous environment, place new constraints on the amino-acid folding of BR across the purple membrane. The validity of theoretical prediction methods of the secondary structure and polypeptide folding for membrane proteins is challenged. The results on BR show that micro-sequencing of peptides separated by SDS-PAGE and blotted to PVDF can be successfully applied to the study of membrane proteins.

Amino Acid Sequence↗

Genetic transfer of the pigment bacteriorhodopsin into the eukaryote Schizosaccharomyces pombe.

The gene encoding for bacterio-opsin (bop gene) from Halobacterium halobium has been introduced in a yeast expression vector. After transformation in Schizosaccharomyces pombe, bacterio-opsin (BO) is expressed and was detected by antisera. The precursor protein of BO (pre-BO) is processed by cleavage of amino acids at the N-terminal end as in H. halobium. Addition of the chromophore, retinal, to the culture medium results in a slight purple colour of the yeast cells indicating the in vivo regeneration of BO to bacteriorhodopsin (BR) and its incorporation into membranes. Therefore, in contrast to the expression in E. coli, isolation of the membrane protein and reconstitution in lipid vesicles is not necessary for functional analysis. The kinetics of the ground state signal of the photocycle BR in protoplasts is demonstrated by flash spectroscopy and is comparable to that of the natural system. The present investigation shows for the first time the transfer of an energy converting protein from archaebacteria to eukaryotes by genetic techniques. This is a basis for further studies on membrane biogenesis, genetics, and bioenergetics by analysis of in vivo active mutants.

Bacteriorhodopsins↗

Structural changes in bacteriorhodopsin during proton translocation revealed by neutron diffraction.

A neutron diffraction study of spectroscopic states for the light-energized proton pump bacteriorhodopsin (BR) is presented. The photocycle states BR-568 and M were generated at temperatures above 4 degrees C and were measured after trapping at--180 degrees C. In the BR-568 to M-state transition, which is known to be a key step in transmembrane proton pumping, reversible structural changes of the protein were detected. These structural alterations occur in the neighborhood of the cyclohexene ring and at the Schiff's base end of the chromophore retinal. They are interpreted as a 1-2 degree tilt of three or four of the transmembrane alpha-helices or as positional changes of four or five amino acids. The structural changes observed are inherent in the transport mechanism of bacteriorhodopsin.

Bacteriorhodopsins↗

Bacteriorhodopsin precursor is processed in two steps.

Besides the Coomassie-blue-stained band corresponding to mature bacterioopsin two additional bands of slightly higher apparent molecular masses were observed in purple membrane preparations from Halobacterium halobium by SDS-PAGE. The staining intensity within the triple band pattern varied with the age of the cell culture. For cells in the stationary growth phase the lower band, corresponding to mature bacterioopsin, is the predominant one. Immunodetection and site-specific proteolysis with papain identified the upper band as originating from the previously described precursor of bacterioopsin with its 13-amino-acid-long N-terminal presequence. Our results suggest that the intermediate band is due to a modified precursor of bacterioopsin with a truncated presequence of about eight amino acids. A two-step mechanism for the processing of pre-bacterioopsin to the mature protein in this archaebacterium is proposed.

Amino Acid Sequence↗