PubMed Health⌕ Search

Biomedical subjects

G Decher

Publications and source records attributed to G Decher.

7 recordsLinked to original sources
PubMed2005

Dissipation-enhanced quartz crystal microbalance studies on the experimental parameters controlling the formation of supported lipid bilayers.

We report on the investigations of the transformation of spherically closed lipid bilayers to supported lipid bilayers in aqueous media in contact with SiO(2) surfaces. The adsorption kinetics of small unilamellar vesicles composed of dimyristoyl- (DMPC) and dipalmitoylphosphatidylcholine (DPPC) mixtures on SiO(2) surfaces were investigated using a dissipation-enhanced quartz crystal microbalance (QCM-D) as a function of buffer (composition and pH), lipid concentration (0.01-1.0 mg/mL), temperature (15-37 degrees C), and lipid composition (DMPC and DMPC/DPPC mixtures). The lipid mixtures used here possess a phase transition temperature (T(m)) of 24-33 degrees C, which is close to the ambient temperature or above and thus considerably higher than most other systems studied by QCM-D. With HEPES or Tris.HCl containing sodium chloride (150 mM) and/or calcium chloride (2 mM), intact vesicles adsorb on the surface until a critical density ((c)) is reached. At close vesicle contact the transformation from vesicles to supported phospholipid bilayers (SPBs) occurs. In absence of CaCl(2), the kinetics of the SPB formation process are slowed, but the passage through (c) is still observed. The latter disappears when buffers with low ionic strength were used. SPB formation was studied in a pH range of 3-10, yet the passage through (c) is obtained only for pH values above to the physiological pH (7.4-10). With an increasing vesicle concentration, (c) is reached after shorter exposure times. At a vesicle concentration of 0.01-1 mg/mL, vesicle fusion on SiO(2) proceeds with the same pathway and accelerates roughly proportionally. In contrast, the pathway of vesicle fusion is strongly influenced by the temperature in the vicinity of T(m). Above and around the T(m), transformation of vesicles to SPB proceeds smoothly, while below, a large number of nonruptured vesicles coexist with SPB. As expected, the physical state of the membrane controls the interaction with both surface and neighboring vesicles.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2005

Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles obtained by spraying: integrity of the vesicles.

In a previous paper (Michel, M.; Vautier, D.; Voegel, J.-C.; Schaaf, P.; Ball, V. Langmuir 2004, 20, 4835), we showed that phospholipid vesicles can be incorporated into poly(glutamic-acid)/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films built by the alternated dipping of a surface in polyanion and polycation solutions. AFM imaging, quartz crystal microbalance, and ellipsometry suggested that the vesicles remain intact when adhering on the surface. In the present paper, we show that such films can also be realized by spraying both the polyelectrolyte solutions and the vesicles onto the surface. Using such vesicles filled with ferrocyanide ions, we prove by cyclic voltammetry that the sprayed vesicles remain intact when embedded in the multilayers. We show that multilayers containing two distinct layers of intact vesicles separated by several polyanion/polycation bilayers can also be constructed. Polyelectrolyte multilayers containing layers of phospholipid vesicles could act as reservoirs for drug or other biologically active molecules in controlled release bioactive coatings.

Electrochemistry↗
PubMed2005

Dipping versus spraying: exploring the deposition conditions for speeding up layer-by-layer assembly.

Polyelectrolyte film fabrication by successive spraying of polycation and polyanion solutions is described and compared to classic dipping. The poly(styrenesulfonate)/poly(allylamine) system is examined in detail. The influence of various parameters such as spraying time, polyelectrolyte concentration, and effect of film drying during multilayer construction is investigated. It is found that film deposition by spraying is easily controlled and very reliable. The thickness of the multilayers grows linearly with the number of deposition cycles similarly to what is observed when dipping substrates or when polyelectrolyte solutions flow over a surface. The assembly of films is very fast and leads to films with small surface roughness as estimated by atomic force microscopy and X-ray reflectometry. Spray deposition allows achieving regular multilayer growth even under conditions for which dipping fails to produce homogeneous films (e.g., extremely short contact times). Moreover, because drainage constantly removes a certain quantity of the excess material arriving at the surface, one can even skip the rinsing step and, thus, speed up even further the whole buildup process.

Journal Article↗
PubMed2001

Peptide hormone covalently bound to polyelectrolytes and embedded into multilayer architectures conserving full biological activity.

We report the development of new bioactive coatings of biomaterials based on the alternate deposition of oppositely charged polyelectrolytes. We selected polylysine (PLL) and poly(glutamic acid) (PGA) for the polyelectrolytes and murine melanoma cells as a biological test model system. These cells respond specifically to a small peptide hormone, alpha-melanocortin, which is a potent stimulator of melanogenesis. We show that a synthetic alpha-melanocortin derivative, covalently coupled to PLL forming the outer layer of a multilayer film remains as biologically active as the free hormone. Furthermore, the long time activity of the hormone is maintained when embedded in multilayer architectures whereas its short time activity depends on integration depth. The embedding of bioactive molecules not only anchors them irreversibly on the biomaterial, but opens also the possibility to control their activity. In comparison to conventional coating methods, polyelectrolyte multilayers are easy to prepare and retain their biological activity after storage as dry material. These very flexible systems allow broad medical applications for implant and tissue engineering.

Animals↗
PubMed2000

Protein interactions with polyelectrolyte multilayers: interactions between human serum albumin and polystyrene sulfonate/polyallylamine multilayers.

The interactions between polystyrenesulfonate (PSS)/polyallylamine (PAH) multilayers with human serum albumin (HSA) were investigated by means of scanning angle reflectometry (SAR). We find that albumin adsorbs both on multilayers terminating with PSS (negatively charged) or PAH (positively charged) polyelectrolytes. On films terminating with PSS only, an albumin equivalent monolayer is found whereas when PAH constitutes the outer layer, albumin interacts with the multilayer in such a way as to form a protein film that extends over thicknesses that can be as high as four times the largest dimension of the native albumin molecule. Once the protein film is formed, it is found that when the albumin solution is replaced by a pure buffer solution of same ionic strength as the adsorption solution almost no desorption takes place. On the other hand, when a buffer solution of higher ionic strength is brought in contact with the albumin film, a significant amount of adsorbed proteins is released. One also observes that, for albumin solutions of a given protein concentration, the adsorbed protein amount depends on the ionic strength of the adsorption solution. On surfaces terminating with PAH, the adsorbed protein amount first increases rapidly but passes through a maximum and decreases with the ionic strength. The ionic strength corresponding to the maximum of the adsorbed albumin amount itself depends on the albumin concentration. On the other hand, on films terminating with PSS the adsorbed amount increases with the salt concentration before leveling-off. These results show that the underlying complexity of concentration and pH dependent adsorption/desorption equilibria often simply termed "protein adsorption" is the result of antagonist competing interactions that are mainly of electrostatic origin. We also propose two microscopic models, that are compatible with our experimental observations.

Adsorption↗
PubMed1990

Giant liposomes as model membranes for immunological studies: spontaneous insertion of purified K1-antigen (poly-alpha-2,8-NeuAc) of Escherichia coli.

A flow chamber has been constructed to use giant liposomes (diameter 5-50 microns) as model membranes for immunological studies and other experiments involving the interaction with water-soluble compounds. As an example of immunological importance, the insertion of purified K-antigen from Escherichia coli K1 has been studied. Despite its large hydrophilic part (poly-alpha-2,8-NeuAc), which is capped at its potential reducing end with phosphatidic acid acting as a lipid anchor group, this water-soluble material is readily incorporated into liposomal membranes of dimyristoylphosphatidylcholine (DMPC). The incorporation has been proven by immunofluorescence using a FITC-labeled monoclonal anti-K1-IgG. Without the lipid residue, however, no binding of poly-alpha-2,8-NeuAc to the liposomes has been observed. This could be shown by using colominic acid, an oligomeric form of alpha-2,8-NeuAc with free reducing ends instead of purified K1-antigen. The possibility for further manipulation of this model system has been shown by using a poly-alpha-2,8-NeuAc cleaving enzyme (endoneuraminidase). The function of the endoneuraminidase has been proven by showing no binding of the antibody after enzyme treatment of K1-bearing liposomes as well as by rapid loss of fluorescence of a previously bound FITC-antibody.

Antibodies, Monoclonal↗