PubMed Health⌕ Search

Biomedical subjects

G Dresselhaus

Publications and source records attributed to G Dresselhaus.

At least 19 recordsLinked to original sources
PubMed2005

Strain-induced interference effects on the resonance Raman cross section of carbon nanotubes.

In this Letter, we report the effects of strain on the electronic properties of single-wall carbon nanotubes. When we normalize the electronic transition energies to the corresponding values obtained for unstrained tubes, we obtain that, regardless of the tube diameter, all the data collapse onto universal curves following an n - m = constant family pattern. In the case of metallic tubes, quantum interference effects on the Raman cross section are predicted for strained tubes when the energies of the lower and the upper components have nearly the same values. Experimental evidence for the strain-induced Raman cross section changes is observed in single nanotube spectroscopy.

Journal Article↗
PubMed2005

Phonon-assisted excitonic recombination channels observed in DNA-wrapped carbon nanotubes using photoluminescence spectroscopy.

By using a sample of DNA-wrapped single-wall carbon nanotubes strongly enriched in the (6,5) nanotube, photoluminescence emissions observed at special excitation energy values were identified with specific mechanisms of phonon-assisted excitonic absorption and recombination processes associated with (6,5) nanotubes, including one-phonon, two-phonon, and some continuous-luminescence processes. Such detailed processes are not separately identified in three-dimensional semiconducting materials. A general theoretical framework is presented to interpret the experimentally observed phonon-assisted processes in terms of excitonic states.

DNA↗
PubMed2005

Resonance Raman spectroscopy characterization of single-wall carbon nanotube separation by their metallicity and diameter.

Several techniques were recently reported for the bulk separation of metallic (M) and semiconducting (S) single wall carbon nanotubes (SWNTs), using optical absorption and resonance Raman spectroscopy (RRS) as a proof of the separation. In the present work, we develop a method for the quantitative evaluation of the M to S separation ratio, and also for the SWNT diameter selectivity of the separation process, based on RRS. The relative changes in the integrated intensities of the radial-breathing mode (RBM) features, with respect to the starting material, yield the diameter probability distribution functions for M and S SWNTs in the separated fractions, accounting for the different resonance conditions of individual SWNTs, while the diameter distribution of the starting material is obtained following the fitting procedure developed by Kuzmany and coworkers. Features other than the RBM are generally less effective for characterization of the separation process for SWNTs.

Metals↗
PubMed2004

Determination of nanotubes properties by Raman spectroscopy.

The basic concepts and characteristics of Raman spectra from single-wall carbon nanotubes (SWNTs, both isolated and bundled) are presented. The physical properties of the SWNTs are introduced, followed by the conceptual framework and characteristics of their Raman spectra. Each Raman feature, namely the radial breathing mode, the tangential G band, combination modes and disorder-induced bands are discussed, addressing their physical origin, as well as their capability for characterizing SWNT properties.

Carbon↗
PubMed2004

Electronic, thermal and mechanical properties of carbon nanotubes.

A review of the electronic, thermal and mechanical properties of nanotubes is presented, with particular reference to properties that differ from those of the bulk counterparts and to potential applications that might result from the special structure and properties of nanotubes. Both experimental and theoretical aspects of these topics are reviewed.

Biocompatible Materials↗
PubMed2004

One-dimensional character of combination modes in the resonance Raman scattering of carbon nanotubes.

Resonance Raman spectroscopy with an energy tunable system is used to analyze the 600-1100 cm(-1) spectral region in single-wall carbon nanotubes. Sharp peaks are associated with the combination of zone folded optic and acoustic branches from 2D graphite. These combination modes exhibit a peculiar dependence on the excitation laser energy that is explained on the basis of a highly selective resonance process that considers phonons and electrons in low dimensional materials.

Journal Article↗
PubMed2003

Resonance Raman spectra of carbon nanotubes by cross-polarized light.

Resonance Raman studies on single wall carbon nanotubes (SWNTs) show that resonance with cross polarized light, i.e., with the E(mu,mu+/-1) van Hove singularities in the joint density of states needs to be taken into account when analyzing the Raman and optical absorption spectra from isolated SWNTs. This study is performed by analyzing the polarization, laser energy, and diameter dependence of two Raman features, the tangential modes (G band) and a second-order mode (G' band), at the isolated SWNT level.

Journal Article↗
PubMed2003

Phonon trigonal warping effect in graphite and carbon nanotubes.

The one-dimensional structure of carbon nanotubes leads to quantum confinement of the wave vectors for the electronic states, thus making the double resonance Raman process selective, not only of the magnitude, but also of the direction of the phonon wave vectors. This additional selectivity allows us to reconstruct the phonon dispersion relations of 2D graphite, by probing individual single wall carbon nanotubes of different chiralities by resonance Raman spectroscopy, and using different laser excitation energies. In particular, we are able to measure the anisotropy, or the trigonal warping effect, in the phonon dispersion relations around the hexagonal corner of the Brillouin zone of graphite.

Journal Article↗
PubMed2003

The concept of cutting lines in carbon nanotube science.

A review is presented of one-dimensional cutting lines that are utilized to obtain the physical properties of carbon nanotubes from the corresponding properties of graphite by the zone-folding scheme. Quantization effects in general low-dimensional systems are briefly discussed, followed by a more detailed consideration of one-dimensional single-wall carbon nanotubes. The geometrical structure of the nanotube is described, from which quantum confined states are constructed. These allowed states in the momentum space of graphite are known as cutting lines. Different representations of the cutting lines in momentum space are introduced. Electronic and phonon dispersion relations for nanotubes are derived by using cutting lines and the zone-folding scheme. The relation between cutting lines and singularities in the electronic density of states is considered. The selection rules for carbon nanotubes are shown to be directly connected with the cutting lines. Different experimental techniques are considered that confirm the validity of cutting lines and the zone-folding approach.

Graphite↗
PubMed2002

Single nanotube Raman spectroscopy.

A review is presented on the observation of the resonant Raman spectra from one isolated single wall carbon nanotube, focusing on the important structural information that is provided by single nanotube spectroscopy including the (n, m) determination of the individual tubes. The special sensitivity of the radial breathing mode to the (n, m) determination is emphasized, and the corroboration of this (n, m) assignment by diameter- and chirality-dependent phenomena in other Raman modes, such as the G-band, D-band, and G'-band features is also discussed. The significance of single nanotube spectroscopy for future nanotube research in general is briefly reviewed.

Journal Article↗
PubMed2001

Probing phonon dispersion relations of graphite by double resonance Raman scattering.

The phonon dispersion relations of graphite can be probed over a wide range of the Brillouin zone by double resonance Raman spectroscopy. The double resonance Raman process provides us with new assignments for the dispersive and nondispersive features observed in the Raman spectra of disordered graphite and carbon nanotubes, some features having been incorrectly assigned previously, or not assigned at all.

Journal Article↗
PubMed2001

Structural ( n, m) determination of isolated single-wall carbon nanotubes by resonant Raman scattering.

We show that the Raman scattering technique can give complete structural information for one-dimensional systems, such as carbon nanotubes. Resonant confocal micro-Raman spectroscopy of an (n,m) individual single-wall nanotube makes it possible to assign its chirality uniquely by measuring one radial breathing mode frequency omega(RBM) and using the theory of resonant transitions. A unique chirality assignment can be made for both metallic and semiconducting nanotubes of diameter d(t), using the parameters gamma(0) = 2.9 eV and omega(RBM) = 248/d(t). For example, the strong RBM intensity observed at 156 cm(-1) for 785 nm laser excitation is assigned to the (13,10) metallic chiral nanotube on a Si/SiO2 surface.

Journal Article↗
PubMed2000

Rao et al. reply:

Explore the source record for details and available documents.

Journal Article↗
PubMed2000

Polarized raman study of single-wall semiconducting carbon nanotubes

Polarized Raman spectra were obtained from a rope of aligned semiconducting single-wall nanotubes (SWNTs) in the vicinity of the D band and the G band. Based on group theory analysis and related theoretical predictions, the G-band profile was deconvolved into four intrinsic SWNT components with the following symmetry assignments: 1549 cm(-1) [E2(E(2g))], 1567 cm(-1) [A(A(1g))+E1(E(1g))], 1590 cm(-1) [A(A(1g))+E1(E(1g))] and 1607 cm(-1) [E2(E(2g))]. The frequency shifts of the tangential G modes from the 2D graphitelike E(2g(2)) frequency are discussed in terms of the nanotube geometry.

Journal Article↗
PubMed2000

Surface-enhanced and normal stokes and anti-stokes Raman spectroscopy of single-walled carbon nanotubes.

Surface enhancement factors of at least 10(12) for the Raman scattering of single-walled carbon nanotubes in contact with fractal silver colloidal clusters result in measuring very narrow Raman bands corresponding to the homogeneous linewidth of the tangential C-C stretching mode in semiconducting nanotubes. Normal and surface-enhanced Stokes and anti-Stokes Raman spectra are discussed in the framework of selective resonant Raman contributions of semiconducting or metallic nanotubes to the Stokes or anti-Stokes spectra, respectively, of the population of vibrational levels due to the extremely strong surface-enhanced Raman process, and of phonon-phonon interactions.

Carbon↗
PubMed2000

Polarized raman study of aligned multiwalled carbon nanotubes

Polarized Raman spectra of high purity aligned arrays of multiwalled carbon nanotubes, prepared on silica substrates from the thermal decomposition of a ferrocene-xylene mixture, show a strong dependence of the graphitelike G band and the disorder-induced D band on the polarization geometry employed in the experiments. The experimental G-band intensity exhibits a minimum at straight theta(m) = 55 degrees in the VV configuration, in good agreement with theoretical predictions of a characteristic minimum at 54.7 degrees for A(1g) modes in single wall nanotubes, where straight theta(m) denotes the angle between the polarization direction and the nanotube axis.

Journal Article↗
PubMed1997

Diameter-Selective Raman Scattering from Vibrational Modes in Carbon Nanotubes

Single wall carbon nanotubes (SWNTs) that are found as close-packed arrays in crystalline ropes have been studied by using Raman scattering techniques with laser excitation wavelengths in the range from 514.5 to 1320 nanometers. Numerous Raman peaks were observed and identified with vibrational modes of armchair symmetry (n, n) SWNTs. The Raman spectra are in good agreement with lattice dynamics calculations based on C-C force constants used to fit the two-dimensional, experimental phonon dispersion of a single graphene sheet. Calculated intensities from a nonresonant, bond polarizability model optimized for sp2 carbon are also in qualitative agreement with the Raman data, although a resonant Raman scattering process is also taking place. This resonance results from the one-dimensional quantum confinement of the electrons in the nanotube.

Journal Article↗