Biomedical subjects

G E Reid

Publications and source records attributed to G E Reid.

At least 37 records · Page 2Linked to original sources

PubMed1997

Fabrication of stable packed capillary reversed-phase columns for protein structural analysis.

Capillary column (< or = 320-micron ID) liquid chromatography is an essential tool for the separation and concentration of low-picomole amounts of proteins and peptides for mass-spectrometric based structural analysis. We describe a detailed procedure for the fabrication of stable and efficient 50- to 180-micron ID polyimide fused-silica columns. Columns were packed by conventional slurry packing with reversed-phase silica-based supports followed by column bed consolidation with acetonitrile and sonication. PVDF membrane or internal fused-silica particles were employed for column end-frit construction. The ability of these columns to withstand high back pressures (300-400 bar) enabled their use for rapid chromatography (> 3400 cm/hr; i.e., approximately 40 microliters/min for 200-micron ID columns) and the loading of large sample volumes (up to 500 microliters). The accurate low flow rates (0.4-4.0 microliters/min) and precise gradient formation necessary to operate these columns were achieved by a simple modification of conventional HPLC systems [Moritz et al. (1992), J. Chromatogr. 599, 119-130]. Column performance was evaluated for ability to resolve low-fmol amounts of all components of a mixture of PTH-amino acids and to separate peptides for on-line LC/MS analysis of peptide mixtures derived from in situ digestion of 2-DE resolved protein spots.

Amino Acid Sequence↗

PubMed1996

The disulfide bond structure of Plasmodium apical membrane antigen-1.

Apical membrane antigen-1 (AMA-1) of Plasmodium falciparum is one of the leading asexual blood stage antigens being considered for inclusion in a malaria vaccine. The ability of this molecule to induce a protective immune response has been shown to be dependent upon a conformation stabilized by disulfide bonds. In this study we have utilized the reversed-phase high performance liquid chromatography of dithiothreitol-reduced and nonreduced tryptic digests of Plasmodium chabaudi AMA-1 secreted from baculovirus-infected insect cells, in conjunction with N-terminal sequencing and electrospray-ionization mass spectrometry, to identify and assign disulfide-linked peptides. All 16 cysteine residues that are conserved in all known sequences of AMA-1 are incorporated into intramolecular disulfide bonds. Six of the eight bonds have been assigned unequivocally, whereas the two unassigned disulfide bonds connect two Cys-Xaa-Cys sequences separated by 14 residues. The eight disulfide bonds fall into three nonoverlapping groups that define three possible subdomains within the AMA-1 ectodomain. Although the pattern of disulfide bonds within subdomain III has not been fully elucidated, one of only two possible linkage patterns closely resembles the cystine knot motif found in growth factors. Sites of amino acid substitutions in AMA-1 that are well separated in the primary sequence are clustered by the disulfide bonds in subdomains II and III. These findings are consistent with the conclusion that these amino acid substitutions are defining conformational disulfide bond-dependent epitopes that are recognized by protective immune responses.

Amino Acid Sequence↗

PubMed1996

S-pyridylethylation of intact polyacrylamide gels and in situ digestion of electrophoretically separated proteins: a rapid mass spectrometric method for identifying cysteine-containing peptides.

In-gel proteolytic digestion of acrylamide-gel separated proteins is a method widely used for generating peptide fragments for the purpose of identifying proteins by Edman degratation, tandem mass spectrometry, and peptide-mass fingerprinting. However, it is well recognised for disulfide-bonded proteins electrophoresed under reducing conditions that if no precautions are taken to minimise disulfide bond formation during protein digestion or peptide isolation, complex peptide maps can result. Here, we describe an improved method for in-gel protein digestion. It consists of first reducing and S-pyridylethylating Coomassie Brilliant Blue R-250-stained proteins immobilised in the whole gel slab with dithiothreitol and 4-vinylpyridine, excising the individual stained and alkylated proteins, and then digesting them in situ in the gel matrix with trypsin or Achromobacter lyticus protease I. Peptide fragments generated in this manner are extracted from the gel piece and purified to homogeneity by a rapid (< or = 12 min) reversed-phase high performance liquid chromatography (HPLC) procedure, based upon conventional silica supports. Recoveries of peptides are increased by S-pyridylethylation of acrylamide-immobilised proteins prior to in-gel digestion. Further, the levels of gel-related contaminants, which otherwise result in suppression of sample signals during electrosprayionisation mass spectrometry, are greatly reduced by the reduction/alkylation step. Additionally, we demonstrate that S-beta-(4-pyridylethyl)-cysteine containing peptides can be readily identified during reversed-phase HPLC by absorbance at 254 nm, and during electrospray ionisation tandem mass spectrometry by the appearance of a characteristic-pyridylethyl fragment ion of 106 Da. The position of cysteine residues in a sequence can be determined as phenylthiohydantoin S-beta-(4-pyridylethyl)-cysteine during Edman degradation, and by tandem mass spectrometry.

Acrylic Resins↗

PubMed1995

Characterization of the protease processing sites in a multidomain proteinase inhibitor precursor from Nicotiana alata.

A gene encoding a 40.3-kDa serine proteinase inhibitor (PI) precursor is expressed at high levels in the stigma of the ornamental tobacco, Nicotiana alata. The precursor is processed proteolytically in vivo to release five homologous proteinase inhibitors of approximately 6 kDa, as well as two flanking peptides. The five PIs have been purified from stigmas and identified by N-terminal sequencing, electrospray mass spectrometry and inhibition activity against chymotrypsin or trypsin. One of the PIs inhibits chymotrypsin and the other four are most active on trypsin. Cleavage occurs in a linker region (EEKKND) that is repeated six times in the precursor molecule. In the plant, the initial cleavage probably occurs between asparagine and the aspartate residues and ragged ends are formed by subsequent trimming. In vitro, the protease-sensitive linker region is selectively cleaved by the endoproteinases Asp-N, Glu-C and Lys-C to release fully active approximately 6-kDa PIs that are resistant to further proteolytic digestion. The precursor, produced by a recombinant baculovirus, inhibits chymotrypsin more effectively than trypsin. The stoichiometry of 2.6 trypsin molecules/1 precursor molecule indicates that processing is required to activate or expose all of the four trypsin inhibitory sites.

Amino Acid Sequence↗

PubMed1995

C-terminal extension of truncated recombinant proteins in Escherichia coli with a 10Sa RNA decapeptide.

When murine interleukin-6 is overexpressed in Escherichia coli, a small population of molecules exhibits a novel C-terminal modification. Peptide mapping, electrospray ionization-mass spectrometry, and automated N- and C-terminal sequencing identified a peptide ("tag" peptide), -Ala-Ala-Asn-Asp-Glu-Asn-Tyr-Ala-Leu-Ala-Ala-COOH, encoded by a small metabolically stable RNA of E. coli (10Sa RNA) attached to truncated C termini of the recombinant protein. A mutant strain of E. coli in which the chromosomal 10Sa RNA gene (ssrA) is disrupted does not produce this C-terminal modification, confirming that the tag peptide originates from the ssrA gene.

Amino Acid Sequence↗

PubMed1995

Solution structure of a polypeptide containing four heptad repeat units from a merozoite surface antigen of Plasmodium falciparum.

The Plasmodium falciparum antigen SPAM (secreted polymorphic antigen associated with merozoites) contains an unusual set of heptad repeat units with alanine at the a and d positions. Twelve heptads with the consensus sequence AXXAXXX occur in three blocks of four, linked by short nonrepetitive sequences. A 38-residue polypeptide comprising the first block of four heptad units and five flanking residues at either end, SPAM-H1, has been synthesized and its structure in aqueous solution determined from 1H NMR data. Sedimentation equilibrium showed the peptide to be monomeric in aqueous solution. Its structure was determined from 1H NMR-derived distance and dihedral angle constraints by using distance geometry calculations, restrained simulated annealing, and conjugate gradient energy minimization in the CHARMm force field. The polypeptide contains an alpha-helix extending from Ser10 (position e of the first heptad) to at least Lys32 (position f of the fourth heptad) and possibly as far as Val35. The helix is bent, partly as result of a kink around residues 19-20. The conformations of the nine N-terminal residues and the six C-terminal residues are not well defined by the NMR data. The rms deviation from the average of the 20 best structures over the well-defined region (residues 11-31, which have backbone angular order parameters > 0.8) was 1.56 A for backbone heavy atoms (N, C alpha, and C) and 2.12 A for all heavy atoms. 2H2O exchange experiments identified slowly exchanging amide protons near the C-terminus and the last two turns of the helix. The unusual stability of the C-terminus reflects the presence of a new C-capping motif, which may involve the side chain of an asparagine in a position external to the C-cap residue. Possible interactions of the H1 sequence with the other two heptad repeat units in the intact merozoite antigen are discussed.

Amino Acid Sequence↗

PubMed1995

Nonreducing two-dimensional polyacrylamide gel electrophoretic analysis of human colonic proteins.

Immunochemical detection of proteins with antigenic determinants that are dependent on the native spatial conformation of the protein can often pose problems with conventional two-dimensional polyacrylamide gel electrophoresis (2-DE). For example, many antigenic determinants are readily destroyed by reducing agents and/or urea, reagents which are critical components of many of the conventional isoelectric focusing and immobilized-pH-gradient (IPG) protocols used in the first electrophoretic dimension. Here we describe the use of commercially available precast 2-DE gels for performing nonreducing/non-urea 2-DE of proteins extracted from the human colon cancer cell line LIM 1215 with 0.3% Triton X-100 that permit the identification of antigens with conformational determinants by immunoblot analysis. Previous, related studies demonstrated the usefulness of peptide-mass fingerprinting for identifying 2-DE resolved proteins. Here we show how partial protein sequence data obtained by rapid peptide mapping, using capillary column liquid chromatography directly coupled with electrospray ionization tandem mass spectrometric methodologies, enhances the usefulness of this approach for identifying incompletely resolved proteins. The nonreducing 2-DE gel images reported in this study, along with our master 2-DE gel protein database for both normal human colonic crypts and several colon-cancer-derived cell lines, and information regarding microtechniques employed in this laboratory for obtaining structural data on 2-DE resolved proteins can be accessed over the Internet using World Wide Web (URL address: http:@www.ludwig.edu.au).

Amino Acid Sequence↗

PubMed1995

Chemical techniques employed for the primary structural analysis of proteins and peptides.

This chapter summarises modern microchemical approaches to the purification, identification and primary structure analysis of peptides and proteins. Discussion of high-sensitivity purification methods is restricted to two-dimensional polyacrylamide gel electrophoresis (2-DE) and microbore/capillary column reversed-phase high-performance liquid chromatography (RP-HPLC). Associated techniques are discussed, particularly with respect to analysis of the products with current automated amino acid sequencers and mass spectrometers.

Amino Acid Sequence↗

PubMed1993

Specific covalent modification of the tryptophan residues in murine interleukin-6. Effect on biological activity and conformational stability.

Modification of recombinant murine interleukin-6 (mIL-6) with the tryptophan-specific reagent 2-nitrophenylsulfenyl chloride under mild acidic conditions, 0.1 M sodium acetate, pH 3.5, yielded a derivative containing 2.02 mol 2-nitrophenylsulfenyl tryptophan/mol protein. The sites of modification were identified as Trp36 and Trp160. No detectable side reactions occurred on other amino acids in the molecule, as indicated by the combination of endoproteinase Asp-N peptide mapping, Edman degradation and electrospray mass spectrometry. Sulfenylation of the two tryptophan residues in mIL-6 caused a 50% reduction in both the biological activity in the murine-hybridoma-growth-factor assay using 7TD1 cells and receptor-binding affinity to mIL-6 receptors. Sulfenylation of mIL-6 did not significantly affect the overall conformation of the protein as measured by farultraviolet circular dichroism and binding to the neutralizing anti-mIL-6 mAb 6B4. The sulfenylated protein was, however, significantly less stable [delta delta G(H2O) = 3.98 kJ/mol] than unmodified mIL-6 as measured by urea-gradient gel electrophoresis.

Amino Acid Sequence↗

PubMed1992

Purification and characterization of a recombinant murine interleukin-6. Isolation of N- and C-terminally truncated forms.

Murine interleukin-6 (IL-6), when expressed in Escherichia coli using the pUC9 vector, accumulated as insoluble aggregates or 'inclusion bodies'. After selective urea washing of the inclusion bodies, to remove extraneous proteins, murine IL-6 was solubilized with 8 M guanidine hydrochloride and then rapidly purified to homogeneity by gel-permeation chromatography followed by reversed-phase HPLC. It was demonstrated that complete disulfide bond formation in murine IL-6 occurred during the early urea washing/guanidine hydrochloride extraction steps, so no refolding step was required. When fully reduced murine IL-6 was dissolved in 8 M guanidine hydrochloride and allowed to air-oxidize, complete disulfide bond formation, monitored by analytical reversed-phase HPLC, was shown to occur within 13 h at 6 degrees C. About 25 mg pure protein was obtained from 37 g wet cells. This recombinant murine IL-6 had a specific activity in the hybridoma growth factor assay of 2 x 10(8) U/mg, which is equivalent to that of native murine IL-6. During the purification procedure, a number of variant forms of murine IL-6 were isolated and partially characterized. Two of these forms, T1 and T3, were C-terminal deletants of murine IL-6 lacking about 60 and 20 amino acids from the C-terminus, respectively, while the other form, T2, was an N-terminal deletant lacking 37 amino acids from the N-terminus. None of these variant forms of murine IL-6 bound to the murine IL-6 receptor and, consequently, all were inactive in the hybridoma growth factor assay.

Amino Acids↗

PubMed1992

Automated solid-phase peptide synthesis: use of 2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate for coupling of tert-butyloxycarbonyl amino acids.

2-(1H-Benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate (TBTU) has been adapted for use as a coupling reagent for tert-butyloxycarbonyl (Boc) amino acids in automated solid-phase peptide synthesis. When compared to the existing preformed symmetrical anhydride procedure employing dicyclohexyl-carbodiimide (DCC), the use of TBTU in the presence of 1-hydroxybenzotriazole (HOBt) provides a more efficient coupling procedure for Boc-amino acid derivatives. Overall cycle times using TBTU/HOBt coupling reagents (30 min) compare favorably to those of the DCC-mediated procedure (approx 65 min). Dimethylformamide can be used as the sole solvent for both activation and coupling reactions. Implementation of TBTU/HOBt coupling conditions does not require replumbing of any lines of the Applied Biosystems Model 430A instrument and necessitates changes to only three reagent bottle positions. The variable coupling efficiencies of Boc-asparagine following activation with TBTU/HOBt (as low as 89%) can be overcome by protection of the amide function of Boc-asparagine with the 9-xanthyl group. Examples of the synthesis and characterization of a number of peptides ranging in length from 13 to 29 residues are given.

Amino Acid Sequence↗

PubMed1992

Relationship between the cytolysins tenebrosin-C from Actinia tenebrosa and equinatoxin II from Actinia equina.

The chemical, physical and biological properties of the cytolysin tenebrosin-C from Actinia tenebrosa have been compared with those of equinatoxin II from Actinia equina. The two proteins are indistinguishable by reverse-phase and cation-exchange HPLC and capillary zone electrophoresis, and give similar peptide fragments upon cyanogen bromide cleavage (as judged by the chromatographic behaviour, ultraviolet absorption spectra, amino acid composition and N-terminal amino acid sequences of the peptides). Their cardiac stimulatory activities are identical, and their haemolytic activities are similar, with equinatoxin II having slightly greater activity. These data indicate that the two molecules are either identical in all 179 amino acid positions, or differ by no more than one or two residues. These findings are discussed in the context of the taxonomic relationship between the two species of sea anemone.

Amino Acid Sequence↗

PubMed1991

Identification of a functional domain of human granulocyte colony-stimulating factor using neutralizing monoclonal antibodies.

Human granulocyte colony-stimulating factor (G-CSF) is a hemopoietic growth factor that is being used successfully to treat various forms of neutropenia. To define functionally important regions of G-CSF, we have prepared 37 monoclonal anti-G-CSF antibodies and mapped the regions of G-CSF recognized by different antibody groups. Antibodies recognizing similar epitopes were identified by competition assays, neutralization assays, conformation dependence and cross-reactivity with canine G-CSF. Seven of eight neutralizing antibodies fell into two related epitope groups and were conformation-dependent. The eighth was unrelated and conformation-independent. Peptides of G-CSF were generated by chemical or enzymatic digestion and tested for antibody reactivity. One of the neutralizing antibodies (LMM351) recognized a small, disulfide-bonded peptide from the V8 protease digest (residues 34-46). A synthetic peptide (residues 20-58) was recognized by all the neutralizing antibodies, implicating this disulfide-bonded loop in receptor binding. The epitopes recognized by nonneutralizing antibodies were found throughout G-CSF. Thus, regions of G-CSF that are not involved in receptor binding have also been defined. A CNBr peptide (residues 1-121) had greatly reduced biological activity, indicating that the COOH terminus is required for receptor binding. We predict that residues 20-46 and the COOH terminus bind to the G-CSF receptor.

Amino Acid Sequence↗

PubMed1990

Strategies for internal amino acid sequence analysis of proteins separated by polyacrylamide gel electrophoresis.

An evaluation has been made of various strategies for obtaining internal amino acid sequence data from electrophoretically separated proteins. Electroblotting, in situ proteolysis and extraction, and direct electroelution are compared. Electroblotting of protein or peptides from gels resulted in poor yields (typically, 1-7%). However, higher yields (3-67%) were achieved by in situ enzymatic cleavage followed by acid extraction of the peptides from the gel. Peptides extracted from the gel were separated by reversed-phase high-performance liquid chromatography (RP-HPLC), on short, small-bore columns (100 x 2.1 mm I.D.), to enable recovery of peptides in small volumes (ca. 50 microliters) suitable for microsequence analysis. Capillary zone electrophoresis under acidic conditions (pH 2.5) was used to assess peptide purity before sequence analysis. Cysteine residues were identified in unmodified proteins or peptides by a characteristic phenylthiohydantoin (PTH)-amino acid derivative during sequence analysis. This derivative does not co-chromatograph with any known PTH-amino acid. Direct electrophoretic elution of protein from gels yielded between 45-50% of applied protein. Proteins recovered from gels by electrophoretic elution required further purification by inverse-gradient RP-HPLC [R. J. Simpson, R. L. Moritz, E. C. Nice and B. Grego, Eur. J. Biochem., 165 (1987) 21] to remove sodium dodecylsulphate and acrylamide-related contaminants for sequence analysis.

Amino Acid Sequence↗

PubMed1990

Complete amino acid sequence of tenebrosin-C, a cardiac stimulatory and haemolytic protein from the sea anemone Actinia tenebrosa.

The complete amino acid sequence of the cardiac stimulatory and haemolytic protein tenebrosin-C, from the Australian sea anemone Actinia tenebrosa, has been determined by Edman degradation of the intact molecule and fragments produced by treatment of the polypeptide chain with cyanogen bromide and enzymatic cleavage with endoproteinase Asp-N, thermolysin and trypsin. The molecule is a single-chain polypeptide consisting of 179 amino acid residues with a calculated molecular mass of 19,797 Da. Tenebrosin-C shows a high degree of amino acid sequence similarity (63%) with Stoichactis helianthus cytolysin III [Blumenthal, K. M. and Kem, W. R. (1983) J. Biol. Chem. 258, 5574-5581] and is identical to a partial sequence (90 residues) reported for equinatoxin, a cardiostimulatory and haemolytic protein isolated from the European sea anemone Actinia equina [Ferlan, I. and Jackson, K. (1983) Toxicon Suppl. 3, 141-144]. No amino acid sequence similarity was detected between tenebrosin-C and other protein sequences stored in available databases. The predicted secondary structure of tenebrosin-C suggests that it is a compact, highly structured molecule.

Amino Acid Sequence↗

PubMed1990

Internal amino acid sequencing of proteins by in situ cyanogen bromide cleavage in polyacrylamide gels.

A new method was developed for generating peptide fragments for amino acid sequence analysis from polyacrylamide-gel separated proteins. This method involves in situ CNBr treatment of proteins in the polyacrylamide gel after their separation by electrophoresis. Pure CNBr peptides were recovered either by solvent extraction followed by microbore column reversed-phase HPLC or, alternatively, by a second electrophoretic separation step (SDS-PAGE) followed by electrotransfer of the peptides onto polyvinylidene difluoride (PVDF) membranes. These approaches yielded sequence data at subnanomole levels for a wide range of CNBr fragments recovered from gel-separated proteins.

Amino Acid Sequence↗

PubMed1989

Peptide mapping and internal sequencing of proteins electroblotted from two-dimensional gels onto polyvinylidene difluoride membranes. A chromatographic procedure for separating proteins from detergents.

Direct sequence analysis of proteins electroblotted from two-dimensional polyacrylamide gels onto immobilizing matrices provides an efficient technique for obtaining N-terminal sequence data for proteins not amenable to purification by reversed-phase high-performance liquid chromatography (RP-HPLC). We present in this paper a procedure for obtaining peptide fragments from electroblotted proteins for internal amino acid sequence analysis. First, Coomassie Blue-stained proteins are extracted from polydivinylidene difluoride membranes, using a detergent mixture of sodium dodecylsulfate and Triton X-100. Proteins are then separated from the detergent mixture by a chromatographic procedure which relies on the ability of proteins to interact with certain reversed-phase sorbents at high organic solvent concentrations. Under these conditions, detergents and Coomassie Blue are not retained and pass through the column. Proteins are recovered by simultaneously: (i) introducing trifluoroacetic acid into the mobile phase and (ii) decreasing the organic solvent concentration. After proteolytic fragmentation, peptides are purified by microbore-column (1-2 mm I.D.) RP-HPLC for microsequence analysis.

Amino Acid Sequence↗

PubMedDate not supplied

Identification and characterization of recombinant murine interleukin-6 with a C-terminal pentapeptide extension using capillary reversed phase HPLC-MS and edman degradation.

We have identified a preparation of recombinant murine interleukin-6 (mIL-6) that, in addition to the anticipated product, also contained approximately equal amounts of mIL-6 with a C-terminal pentapeptide extension. The extension mutant was generated by readthrough of the stopcodon, and termination at a second in-frame stopcodon 12 base pairs 3' in the expression vector. Aliquots of the preparation were subjected to proteolytic digestion with Asp-N and Lys-C-endopeptidase. The resultant peptides were separated by reversed-phase capillary HPLC, and analysed using a combination of mass spectrometry and N-terminal sequence analysis. These data revealed a C-terminal pentapeptide (Gln-Gly-Ser-Val-Asp) extension, with the authentic stopcodon being translated as glutamine. The extension mutant was isolated by reversed-phase HPLC and shown to have similar mitogenic activity to mIL-6 on murine hybridoma 7TD1 cells.

Animals↗