Biomedical subjects

G Licitra

Publications and source records attributed to G Licitra.

At least 19 recordsLinked to original sources

PubMed2006

Proteolysis and microstructure of Piacentinu Ennese cheese made using different farm technologies.

The aim of this study was to provide the biochemical and structural characterization of Piacentinu Ennese cheese and to evaluate the impact of different farm technologies on cheese proteolysis and microstructure. Fifteen cheeses were manufactured according to traditional technology, i.e., from raw milk and farmhouse rennet in the absence of starter culture. Pasteurized milk, commercial rennet, and starter were used for production of 20 nontraditional cheeses. Proteolysis in Piacentinu Ennese cheese was monitored during a 2- to 10-mo ripening time. Low rates of overall proteolysis were observed in cheese, as percentages of total N soluble at pH 4.6 and in 12% trichloroacetic acid were about 11.40 and 8.10%, respectively, after 10 mo of age. Patterns of primary proteolysis by urea-PAGE showed that alpha(s)-caseins were degraded to a larger extent than were beta-caseins, although a considerable amount of both caseins was still intact after 10 mo. Reversed phase-HPLC analysis of the cheese peptide fractions showed a slow decrease in the levels of hydrophobic peptides coupled to increasing levels of hydrophilic compounds as the cheese aged. The structural characteristics of Piacentinu Ennese cheese were evaluated by scanning electron microscopy after 2, 4, and 6 mo of age. The micrographs showed a sponge-like structural network with a well-distributed system of empty spaces, originally occupied by whey and fat. The microstructure changed during cheese ripening to become more compact with cavities of smaller size. Farm technology significantly affected cheese proteolysis and microstructure. Nontraditional cheeses had higher levels of pH 4.6-soluble N and showed a larger hydrolysis of alpha(s)-casein fractions by urea-PAGE analysis than did traditional cheeses. Large differences between cheese-types also concerned the patterns of secondary proteolysis. Nontraditional cheeses had higher levels of 12% trichloroacetic acid-soluble N and showed larger proportions of free amino acids and hydrophilic peptides in the HPLC profiles of the corresponding 70% ethanol-soluble N fraction than traditional cheeses. Nontraditional cheeses also had a more open structure with a coarser and less continuous appearance than did traditional cheeses. A large amount of variability in cheese proteolysis and structure within nontraditional treatment reflected farm-dependent changes in manufacturing conditions related to the use of various types of rennet and starter.

Agriculture↗

PubMed2006

Interaction of brine concentration, brine temperature, and presalting on salt penetration in Ragusano cheese.

Thirty-one 3.6-kg blocks of Ragusano cheese were made on each of 6 different days (in different weeks) starting with a different batch of milk on each day. On d 1, 3, and 5, the cheeses were not presalted and on d 2, 4, and 6, all cheeses were presalted (PS). One of the 31 blocks of cheese was selected at random for analysis before brine salting (i.e., on d 0). The remaining 30 blocks were randomly divided into 2 groups of 15 blocks each; one group was placed in 18% brine (18%B) and the other group was placed in saturated brine (SB). For the 15 blocks within each of the 2 brine concentrations (BC), 5 blocks were placed in a brine tank at 12 degrees C, 5 at 15 degrees C, and 5 at 18 degrees C, and submerged for 24 d. The research objective was to determine the combined impacts (i.e., interactions) of PS the curd before stretching, BC (SB vs. 18%B), and brine temperature (BT; 12, 15, and 18 degrees C) on salt uptake, moisture content, and yield of Ragusano cheese. Although BC, BT, and PS each had their own separate impacts on salt uptake, there was little interaction of these effects on salt uptake when they were used in combination. The PS most quickly delivered salt to the interior of the cheese and was the most effective approach to salting for controlling early gas formation. There were strong separate impacts of BC, BT, and PS on cheese moisture content, moisture loss, and net weight loss, with BC having the largest separate impact on these parameters. Reducing BT reduced salt content and increased moisture, but the effects were small. The more important effect of reduced BT was to reduce growth of gas forming bacteria. The 18%B produced higher moisture, and less moisture and weight loss than SB. The effect of interactions of BC, BT, and PS on moisture loss and net weight loss were small. To achieve the maximum benefit from the various approaches to salting for controlling early gas formation in Ragusano cheese, PS combined with slightly lower BT (i.e., 15 degrees C instead of 18 degrees C) should be used. Although using 18%B instead of SB did increase salt uptake, the point at which improved salt uptake occurred due to use of 18%B did not provide benefit in prevention of early gas formation, as reported separately. However, use of 18%B instead of SB provided a 9.98% increase in cheese yield due to reduced moisture loss during brining; this would be very attractive to cheese makers. The increase in yield needs to be balanced against the risk of growth of undesirable bacteria in the 18%B and the creation of another cheese quality defect.

Animals↗

PubMed2006

Body condition assessment using digital images.

This project assessed the ability to assign a body condition score (BCS) to a dairy cow from digital photographs or videos. Images were taken from the rear of the cow at a 0 to 20 degrees angle relative to the tail head. Four observers assigned a BCS to each of 57 cows at a farm visit (live, farm 1) and later from a photograph (photo). Means +/- standard deviations of BCS by method and observer were as follows: live = 3.25 +/- 0.51, 3.42 +/- 0.49, 3.32 +/- 0.58, 3.13 +/- 0.62; photo = 3.36 +/- 0.52, 3.32 +/- 0.43, 3.44 +/- 0.62, 3.14 +/- 0.6 for observers 1 to 4, respectively. Body condition score means differed across observers for live (observer 2 higher and observer 4 lower, compared with observers 1 and 3) and photo methods (observer 3 lower, compared with observers 1, 2, and 3); however, within observer, the mean live BCS did not differ from the mean photo BCS. Correlation coefficients between BCS assigned live and from photos were 0.84, 0.82, 0.82, and 0.90 for observers 1 to 4, respectively. Subsequently, observer 1 visited 2 farms, assigned a live BCS, and digitally photographed 187 cows (56 and 131 cows from farms 2 and 3, respectively). Observers 2, 3, and 4 assigned a BCS from the photographs. Means +/- standard deviations of BCS by observer (method) were 1 (live) 3.35 +/- 0.55; 2 (photo) 3.33 +/- 0.49; 3 (photo) 3.60 +/- 0.54; and 4 (photo) 3.26 +/- 0.62. The mean BCS for observer 3 was higher and that for observer 4 was lower than for observers 1 and 2. Correlation coefficients between observer 1 and observers 2 through 4 were 0.78, 0.76, and 0.79, respectively. Observer 1 assigned a BCS to 41 cows at a farm visit and 3 wk later assessed the BCS of cows from a video taken at a farm visit by a different individual. Cows were restrained in headlocks at a feed bunk when assessing BCS and for video production. No difference was detected for the mean BCS, for the standard deviation of the mean BCS, or in the distribution of BCS between the live and video assessments. Mean and SD for 17 groups of Holstein cows from 20 farms were used to generate 10,000 random samples of BCS. Groups of 25, 50, 100, and 150 cows were created from the random samples, and estimates of mean BCS were determined by sampling 3 to 80% of the group. Estimates of mean BCS with a sample size of 30% or more from a group of cows fell within the 95% confidence limit of the true mean more than 98% of the time. Digital photographs provide adequate imaging for assessment of BCS. Sampling 30% of a group should be adequate to assess the mean BCS. Video imaging allowed a rapid assessment of BCS but did not permit identification of individual cows.

Animals↗

PubMed2005

Evaluation of bitterness in Ragusano cheese.

The appearance of undesirable bitter taste in Ragusano cheese was investigated by comparing the composition of 9 bitter cheeses with that of 9 reference cheeses of good quality by means of chemical, electrophoretic, and chromatographic analyses. Rates of proteolysis were significantly affected in cheeses of different quality. Primary proteolysis, as measured by pH 4.6-soluble N, was significantly greater in bitter cheeses compared with reference samples. Urea-PAGE profiles showed an almost complete breakdown of caseins in bitter cheeses and the further degradation of primary peptides into smaller compounds not detectable by this technique. Cheeses with defects had significantly lower levels of secondary proteolysis as reflected by the percentage of pH 4.6-soluble N soluble in 12% trichloroacetic acid and the amounts of total free amino acids. Peptides separated by reversed phase-HPLC revealed that the large and significant differences in peptide profiles of the soluble fractions between bitter and reference cheeses were mainly due to a much higher proportion of hydrophobic peptides in the former. The occurrence of bitterness in Ragusano cheese was therefore attributable to unbalanced levels of proteolysis and peptidolysis. Extensive degradation of caseins and primary peptides by activities of proteases produced large amounts of small- and medium-sized hydrophobic peptides that were not adequately removed by peptidases of microflora and therefore accumulated in cheese potentially contributing to its bitter taste. The presence of these compounds in bitter cheeses was related to high salt-in-moisture and low moisture contents that limited the enzymatic activities of microflora important in secondary proteolysis. Combining salt-in-moisture and the ratio of hydrophobic-to-hydrophilic soluble peptides resulted in the best logistic partial least squares regression model predicting cheese quality. Although bitterness is known to be rarely encountered in cheese at salt-in-moisture levels >5.0, all of the bitter cheeses analyzed in this study had salt-in-moisture levels much greater than this value. According to the logistic model, a risk of bitterness development may exist for cheeses with a midrange (5 to 10%) salt-in-moisture content but with an inadequate level of secondary proteolysis.

Caseins↗

PubMed2005

Composition, microstructure, and surface barrier layer development during brine salting.

The goal of this study was to characterize the changes in chemical composition, porosity, and structure that occur at the surface of a block of brine-salted cheese and their relationship to the rate at which salt is taken up from the brine. To create a difference in composition, salt uptake, and barrier layer properties, identical blocks of Ragusano cheese were placed in saturated and 18% salt brine at 18 degrees C for 12 d. The overall moisture content and porosity decreased, whereas salt and salt in moisture content increased near the surface of blocks of brine-salted Ragusano cheese for all treatments. The general appearance of the microstructure of the surface of the blocks of brine-salted cheese was much more compact than the microstructure 1 mm inside the block at both brine concentrations. Large differences in porosity of the barrier layer were produced by brine-salting cheese in 18% vs. saturated brine, with cheese in saturated brine having much lower porosity at the surface and taking up much less salt during brining. The macro network of water channels within the microstructure of the cheese was less open near the surface of the block for cheese in both saturated and 18% brine after 4 d. However, no large differences in the size of the macro channels in the cheese structure due to the difference in brine concentration were observed by scanning electron microscopy. It is possible that the shrinkage of the much smaller pore structure within the casein matrix of the cheese is more important and will become more limiting to the rate of salt diffusion. Further microstructure work at higher resolution is needed to answer this question. The calculated decrease in porosity at the exterior 1-mm portion of the block was 50.8 and 29.2% for cheeses that had been in saturated vs. 18% brine for 12 d, respectively. The difference in brine concentration had a very large impact on the salt in moisture content of the cheese. The exterior of the cheese in 18% brine reached a salt in moisture content almost identical to that of the brine very quickly (17.3% at 4 d), whereas the salt in moisture content at the surface of the cheese block in saturated brine was only 11.9% at 4 d. There appears to be some critical concentration of salt in brine above which there is a large negative impact on salt uptake due to the creation of a barrier layer at the surface of the block of cheese.

Cheese↗

PubMed2004

A new method to measure the acoustic surface impedance outdoors.

In the European countries noise pollution is considered to be one of the most important environmental problems. With respect to traffic noise, different researchers are working on the reduction of noise at the source, on the modelling of the acoustic absorption of the road structure and on the effects of the pavement on the propagation. The aim of this paper is to propose a new method to measure the acoustic impedance of surfaces located outdoors, which allows us to further noise propagation models, in order to evaluate exactly the noise exposure.

Acoustics↗

PubMed2004

Evaluation of the electromagnetic field level emitted by medium frequency AM broadcast stations.

In order to estimate the level of the electromagnetic field produced by telecommunication systems, different computational techniques can be employed whose complexity depends on the accuracy of the final results. In this paper, we present the validation of a code based on the method of moments that allows us to analyse the electromagnetic field emitted by radio-communication systems operating at medium frequencies. The method is able to provide an accurate estimate of the levels of electromagnetic field produced by this type of device and, consequently, it can be used as a method for verifying the compliance of the system with the safe exposure level regulations and population protection laws. Some numerical and experimental results are shown relevant to an amplitude modulated (AM) radio transmitter, together with the results of a forthcoming system that will be operative in the near future.

Algorithms↗

PubMed2004

UMTS signal measurements with digital spectrum analysers.

The launch of the Universal Mobile Telecommunications System (UMTS), the most recent mobile telecommunications standard has imposed the requirement of updating measurement instrumentation and methodologies. In order to define the most reliable measurement procedure, which is aimed at assessing the exposure to electromagnetic fields, modern spectrum analysers' features for correct signal characterisation has been reviewed.

Cell Phone↗

PubMed2004

Contribution of native pasture to the sensory properties of Ragusano cheese.

Ragusano is a Protected Denomination of Origin cheese produced in the Hyblean area of Sicily. Sixteen samples of Ragusano cheese from two different treatments [pasture and total mixed ration (TMR)] were evaluated after 4 and 7 mo of aging. The color of the cheeses produced from milk of cows consuming fresh native pasture plants was much more yellow than cheeses from TMR fed cows (i.e., higher Hunter b value). This was due to transfer of beta-carotene and related compounds from the diet and demonstrated that compounds from native pasture plants changed the sensory characteristics of Ragusano cheese. To avoid a "halo" effect in a trained panel, quantitative descriptive analysis sensory evaluation of these cheeses for odor, taste, consistency, and mouth structure, color differences among cheeses were masked. A unique approach in sensory analysis was developed using sunglasses with lenses designed to block light at the specific wavelengths at which panelists would detect differences in color among samples. Testing was conducted every 2-wk period (15-d increments) with two tests per week using 11 trained panelists. All the panelists tasted all the products. Panelists were able to detect significant differences in the sensory characteristics of cheeses produced from milk of cows consuming native pastures versus TMR even when the color difference was masked.

Animal Feed↗

PubMed2004

Measurement of gas holes and mechanical openness in cheese by image analysis.

A method to measure the amount of the surface area of cheese slices occupied by gas holes was developed to reflect the relative gas production among different cheeses. A digital camera mounted on a copy stand with lighting was used to make digital images of each slice of cheese. A commercial digital image analysis software program was used and an algorithm was written to measure the area of the image of the cheese slice occupied by holes. The image was cropped and scanned to determine which color channel produced the best image contrast. The MATLAB program allowed the user to eliminate mechanical openness or false holes and then to scan the image to produce a percent distribution of pixels in the image as a function of pixel intensity. The user then determined a threshold value to differentiate pixels that were in holes from those representing areas with no holes. The percentage of the total surface area occupied by holes was calculated. The coefficient of variation of the method ranged from 2.43% with gas holes of about 1% of the surface of the cheese slice to a coefficient of variation of 0.92% with gas holes of about 6.8% of the surface area of the cheese slice. Examples of applications of this method are given for Emmental, Ragusano, and Cheddar cheeses. The method can be used as a tool in research studies to correlate the amount of gas production with manufacturing conditions or as a quality control tool in cheese manufacturing.

Cheese↗

PubMed2004

Composition and aroma compounds of Ragusano cheese: native pasture and total mixed rations.

Raw milk from 13 cows fed TMR supplemented with native pasture and from 13 cows fed only TMR on one farm was collected separately 4 times with an interval of 15 d between collections. Two blocks (14 kg each) of cheese were made from each milk. The objective was to determine the influence of consumption of native plants in Sicilian pastures on the aroma compounds present in Ragusano cheese. Milk from cows that consumed native pasture plants produced cheeses with more odor-active compounds. In 4-mo-old cheese made from milk of pasture-fed cows, 27 odor-active compounds were identified, whereas only 13 were detected in cheese made from milk of total mixed ration-fed cows. The pasture cheeses were much more rich in odor-active aldehyde, ester, and terpenoid compounds than cheeses from cows fed only total mixed ration. A total of 8 unique aroma-active compounds (i.e., not reported in other cheeses evaluated by gas chromatography olfactory) were detected in Ragusano cheese made from milk from cows consuming native Sicilian pasture plants. These compounds were 2 aldehydes ([E,E]-2,4-octadienal and dodecanal), 2 esters (geranyl acetate and [E]-methyl jasmonate), 1 sulfur compound (methionol), and 3 terpenoid compounds (1-carvone, L(-) carvone, and citronellol). Geranyl acetate and (E)-methyl jasmonate were particularly interesting because these compounds are released from fresh plants as they are being damaged and are part of a possible plant defense mechanism against damage from insects. Most of the odor-active compounds that were unique in Ragusano cheese from pasture-fed cows appeared to be compounds created by oxidation processes in the plants that may have occurred during foraging and ingestion by the cow. Some odor-active compounds were consistently present in pasture cheeses that were not detected in the total mixed ration cheeses or in the 14 species of pasture plants analyzed. Either these compounds were present in other plants not analyzed, created in the rumen or in cheese after the pasture-plant material had been consumed, or the compounds were lost in the method of sample extraction used for the plant analysis (i.e., steam distillation) versus the solid-phase microextraction method used for the cheeses. This research has demonstrated clearly that some unique odor-active compounds found in pasture plants can be transferred to the cheese.

Animal Feed↗

PubMed2004

Lipolysis and proteolysis in Ragusano cheese during brine salting at different temperatures.

The influence of temperature (12, 15, 18, 21, and 24 degrees C) of saturated brine on lipolysis and proteolysis in 3.8-kg blocks of Ragusano cheese during 24 d of brining was determined. Twenty-six 3.8-kg blocks were made on each day. The cheese making was replicated on 3 different days. All blocks were labeled and weighed prior to brining. One block was sampled and analyzed prior to brine salting. Five blocks were placed into each of 5 different brine tanks at different temperatures. One block was removed from each brine tank after 1, 4, 8, 16, and 24 d of brining, weighed, sampled, and analyzed. Both proteolysis and lipolysis in Ragusano cheese increased with increasing brine temperature (from 12 to 24 degrees C), with the impact of brine temperature on proteolysis and lipolysis becoming progressively larger. Proteolysis was highest in the interior of the blocks where salt in moisture content was lowest and temperature had more impact on proteolysis in the interior position of the block than the exterior position. However, the opposite was true for lipolysis. The total free fatty acid content was higher and temperature had more impact on lipolysis at the exterior position of the block where salt in moisture was the highest. This effect of increased salt concentration on lipolysis was confirmed with direct salted cheeses in a small follow-up experiment. Lipolysis increased with increasing salt in the moisture content of the direct salted cheeses. It is likely that migration of water-soluble FFA from the brine into the cheese and from the interior portion of the cheese to the exterior portion of the cheese also contributed to a higher level of FFA at the exterior portion of the blocks. As brine temperature increased the profile of individual free fatty acids released from triglycerides changed, with the proportion of short-chain free fatty acids increasing with increasing brine temperature. This effect was largest at high salt in moisture content.

Cheese↗

PubMed2004

Chemometric analysis of proteolysis during ripening of Ragusano cheese.

Chemometric modeling of peptide and free amino acid data was used to study proteolysis in Protected Denomination of Origin Ragusano cheese. Twelve cheeses ripened 3 to 7 mo were selected from local farmers and were analyzed in 4 layers: rind, external, middle, and internal. Proteolysis was significantly affected by cheese layer and age. Significant increases in nitrogen soluble in pH 4.6 acetate buffer and 12% trichloroacetic acid were found from rind to core and throughout ripening. Patterns of proteolysis by urea-PAGE showed that rind-to-core and age-related gradients of moisture and salt contents influenced coagulant and plasmin activities, as reflected in varying rates of hydrolysis of the caseins. Analysis of significant intercorrelations among chemical parameters revealed that moisture, more than salt content, had the largest single influence on rates of proteolysis. Lower levels of 70% ethanol-insoluble peptides coupled to higher levels of 70% ethanol-soluble peptides were found by reversed phase-HPLC in the innermost cheese layers and as the cheeses aged. Non-significant increases of individual free amino acids were found with cheese age and layer. Total free amino acids ranged from 14.3 mg/g (6.2% of total protein) at 3 mo to 22.0 mg/g (8.4% of total protein) after 7 mo. Glutamic acid had the largest concentration in all samples at each time and, jointly with lysine and leucine, accounted for 48% of total free amino acids. Principal components analysis and hierarchical cluster analysis of the data from reversed phase-HPLC chromatograms and free amino acids analysis showed that the peptide profiles were more useful in differentiating Ragusano cheese by age and farm origin than the amino acid data. Combining free amino acid and peptide data resulted in the best partial least squares regression model (R(2) = 0.976; Q(2) = 0.952) predicting cheese age, even though the peptide data alone led to a similarly precise prediction (R(2) = 0.961; Q(2) = 0.923). The most important predictors of age were soluble and insoluble peptides with medium hydrophobicity. The combined peptide data set also resulted in a 100% correct classification by partial least squares discriminant analysis of cheeses according to age and farm origin. Hydrophobic peptides were again discriminatory for distinguishing among sample classes in both cases.

Amino Acids↗

PubMed2004

Influence of brine concentration, brine temperature, and presalting on early gas defects in raw milk pasta filata cheese.

Thirty-one 3.8-kg blocks of Ragusano cheese were made on each of 6 d starting with a different batch of raw milk on each day. On d 1, 3, and 5, cheeses were not presalted and on d 2, 4, and 6, all cheeses were presalted. Before brine salting, one of the 31 blocks of cheese was selected at random for analysis (i.e., at d 0). The remaining 30 blocks were randomly divided into 2 batches of 15 blocks each, one group was placed in 18% brine, and the other group was placed in saturated brine. For the 15 blocks within each of the 2 brine concentrations, 5 blocks each were placed in brine tanks at 12, 15, and 18 degrees C. Cheese blocks were sampled immediately before brine salting (d 0) and after 1, 4, 8, 16, and 24 d of brine salting. Presalting the curd with 2% added salt before stretching reduced the coliform count in the cheese by 1.41 log and resulted in a major reduction in early gas formation. Across all treatments in the present study, the average reduction in gas formation due to presalting was 75%. Reducing brine temperature had the second largest impact on reducing gas production, but did not reduce the coliform count in the cheese. Reducing brine temperature from 18 to 12 degrees C made a larger reduction in early gas formation in cheeses that were not presalted (from 6.8 to 1.8% gas holes, respectively) than in cheeses that were presalted (from 1.9 to 0.5% gas holes, respectively). To achieve the same absolute level of gas production in the nonpre-salted cheese as was achieved in presalted cheese in combination with 18 degrees C brine, the brine temperature for the nonpresalted cheese had to be lowered from 18 to 12 degrees C. Reducing brine concentration, although effective at increasing the rate of salt penetration into the block, did not have any impact on coliform count and had minimal impact on reducing gas production. The condition where reducing brine concentration was able to make a reduction in gas production was for cheeses that were not presalted and brined at 18 degrees C. Presalting is a very simple and practical approach to reducing the problem of early gas formation in combination with strategies to improve milk quality and cheese making conditions. Further work is needed to understand the impact of different levels of presalting on death of coliforms and gas production in the cheese.

Cheese↗

PubMed2003

Influence of presalting and brine concentration on salt uptake by Ragusano cheese.

The impact of presalting and nonsaturated brine on salt uptake by Ragusano cheese was determined. The study included four treatments: 1) the traditional method using no presalting and saturated brine, 2) presalting and saturated brine, 3) no presalting and 18% brine for 8 d followed by 16 d in saturated brine, and 4) presalting and 18% brine for 8 d followed by 16 d in saturated brine. Cheese blocks were weighed and sampled before brine salting (time 0) and after 1, 4, 8, 16, and 24 d of brining for each treatment. Presalting delivered 60% of the normal level of salt in the center of the block prior to brine salting without decreasing the rate of uptake of salt from either saturated or 18% brine. Use of 18% salt brine for the first 8 d of 24 d of brine salting increased the rate of salt uptake, compared with 24 d in saturated brine. The increased rate of salt uptake with 18% brine compared with saturated brine was related to the impact of salt brine on the moisture content and porosity of the cheese near the surface of the block. Brine with higher salt content causes a rapid loss of moisture from cheese near the surface of the block. Moisture loss causes shrinkage of the cheese structure and decreases porosity, which impedes moisture movement out and salt movement into the block. The use of 18% salt brine for the first 8 d delayed the moisture loss and cheese shrinkage at the exterior of the block and allowed more salt penetration.

Cheese↗

PubMed2003

Genotype by environment interaction for yield and somatic cell score with alternative environmental definitions.

Differential genetic expression in high and low opportunity Sicilian Holstein-Friesian and Brown Swiss herd environments was investigated using endogenous and exogenous variables in a set of three definitions. Results of genetic by environmental interaction were compared using alternative environmental definitions: within herd-year standard deviation for mature equivalent milk yield (HYSD), detectable incidence of normal vs. abnormal (peakless) lactation and herds clustered by causal relationships from high and low frequency use of nutrition, milking, health and animal handling practices. Data for genetic analysis consisted of first-lactation standardized yields of milk, fat and protein, and weighted somatic cell score for 8897 daughters of 825 Holstein-Friesian sires and 1143 daughters of 220 Brown Swiss sires. Components of covariance, heritabilities, and genetic correlations were estimated using bivariate and multivariate sire models for average and contrasting environments for each definition. Sire variances for yields were consistently smaller in the low opportunity environments of both breeds. Except for differential incidence of abnormal lactation in Friesian herds, correlated yield response in less privileged environments was 0.41 to 0.81 as much as in high opportunity environments, a substantial loss. Genetic correlations between HYSD environments for yield traits of Friesian were 0.48 to 0.66 but exceeded 0.80 for other definitions. Less correlated response in somatic cell score was also predicted for environments with low use of yield-enhancing practices (0.66 for Friesian and 0.61 for Brown Swiss), which may have resulted from less health care and poorer milking management. Therefore, unfavorable management interactions likely foster unequal gains from selection in contrasting environments defined exogenously or by incidence of peakless lactation. Conversely, greater genetic as well as phenotypic response is expected from additional inputs of nutrition, health care and milking management.

Analysis of Variance↗

PubMed2003

Influence of the temperature of salt brine on salt uptake by Ragusano cheese.

The influence of temperature (12, 15, 18, 21, and 24 degrees C) of saturated brine on salt uptake by 3.8-kg experimental blocks of Ragusano cheese during 24 d of brining was determined. Twenty-six 3.8-kg blocks were made on each of three different days. All blocks were labeled and weighed prior to brining. One block was sampled and analyzed prior to brine salting. Five blocks were placed into each of five different brine tanks at different temperatures. One block was removed from each brine tank after 1, 4, 8, 16, and 24 d of brining, weighed, sampled, and analyzed for salt and moisture content. The weight loss by blocks of cheese after 24 d of brining was higher, with increasing brine temperature, and represented the net effect of moisture loss and salt uptake. The total salt uptake and moisture loss increased with increasing brine temperature. Salt penetrates into cheese through the moisture phase within the pore structure of the cheese. Porosity of the cheese structure and viscosity of the water phase within the pores influenced the rate and extent of salt penetration during 24 d of brining. In a previous study, it was determined that salt uptake at 18 degrees C was faster in 18% brine than in saturated brine due to higher moisture and porosity of the exterior portion of the cheese. In the present study, moisture loss occurred from all cheeses at all temperatures and most of the loss was from the exterior portion of the block during the first 4 d of brining. This loss in moisture would be expected to decrease porosity of the exterior portion and act as a barrier to salt penetration. The moisture loss increased with increasing brine temperature. If this decrease in porosity was the only factor influencing salt uptake, then it would be expected that the cheeses at higher brine temperature would have had lower salt content. However, the opposite was true. Brine temperature must have also impacted the viscosity of the aqueous phase of the cheese. Cheese in lower temperature brine would be expected to have higher viscosity of the aqueous phase and slower salt uptake, even though the cheese at lower brine temperature should have had a more porous structure (favoring faster uptake) than cheese at higher brine temperature. Therefore, changing brine concentration has a greater impact on cheese porosity, while changing brine temperature has a larger impact on viscosity of the aqueous phase of the cheese within the pores in the cheese.

Cheese↗

PubMed2002

Chemometric analysis of Ragusano cheese flavor.

Ragusano cheeses were produced in duplicate from milk collected from pasture-fed and total mixed ration (TMR)-fed cattle at four time intervals. The cheeses were subjected to chemical analysis, conventional sensory testing, and gas chromatography-olfactometry (GCO). Data from each type of analysis were examined by principal component and factor analysis and by pattern recognition (SIMCA) to see if sufficient information for classification into pasture-fed and TMR-fed groups was contained therein. The results clearly indicate that there are significant differences in sensory panel and chemical analysis results between the two cheeses. The data were also examined to see if models of sensory responses as a function of analytical or GCO results or both could be constructed with the modeling technique partial least-squares regression (PLS). Strong PLS models of some sensory responses (green and toasted odor; salt, pungent, bitter, and butyric sensations; and smooth consistency) were obtained.

Animal Feed↗