Biomedical subjects

G M Chow

Publications and source records attributed to G M Chow.

7 recordsLinked to original sources

PubMed2006

The effects of substrate position on electroless polyol deposited nanostructured FeNi films.

The nanostructured FeNi thin films were deposited on a polycrystalline Cu substrate by reducing constituent metal salts in refluxing ethylene glycol. The effect of substrate position was investigated. During deposition, the substrate was subject to one of the following processes: (a) complete immersion in solution, (b) repeated immersion followed by suspension above solution (denoted as quenching), and (c) suspension above the solution. Compared to the conventional polyol synthesis of FeNi where Fe concentration could not exceed 30 at%, the quenching process dramatically increased Fe at% to above 40%. Complete suspension of substrate above the solution resulted in Fe-rich films where Fe at% >90%. The microhardness, adhesion, and magnetic properties of deposited films showed a strong dependence on the long-range and short-range order of the film, which, in turn, depended on the substrate position. Quenched films with ordered local Ni environment and higher crystallinity had the highest Vickers hardness, best adhesion to substrate, and largest saturation magnetization compared to those deposited on substrates placed in other positions. The oxidation of Fe occurring in the vapor deposition significantly affected the film properties.

Colloids↗

PubMed2006

Synthesis of monodisperse iron oxide and iron/iron oxide core/shell nanoparticles via iron-oleylamine complex.

Monodisperse magnetic nanoparticles are of great scientific and technical interests. This paper reports a single-step synthesis of monodisperse magnetite nanoparticles with particle size of 8 nm. Iron/maghaemite core/shell nanoparticles with particle size of 11 nm were obtained by reducing the concentration of oleylamine. TEM and in-situ FTIR results suggested that iron-oleylamine intermediate was generated in-situ and decomposed at higher temperature. Oleylamine was also found on the surface of nanoparticles, indicating its role as capping agent which provided steric protection of as-synthesized nanoparticles from agglomeration. Both magnetite and iron/maghaemite core/shell nanoparticles were superparamagnetic at room temperature with a blocking temperature at 80 K and 67 K, respectively.

Adsorption↗

PubMed2005

The effects of particle size and surface coating on the cytotoxicity of nickel ferrite.

The safety and toxicity of nanoparticles are of growing concern despite their significant scientific interests and promising potentials in many applications. The properties of nanoparticles depend not only on the size but also the structure, microstructure and surface coating. These in turn are controlled by the synthesis and processing conditions. The dependence of cytotoxicity on particle size and on the presence of oleic acid as surfactant on nickel ferrite particles were investigated in vitro using the Neuro-2A cell line as a model. For nickel ferrite particles without oleic acid prepared by ball milling, cytotoxicity was independent of particle size within the given mass concentrations and surface areas accessible to the cells. For nickel ferrite particles coated with oleic acid prepared by the polyol method, the cytotoxicity significantly increased when one or two layers of oleic acid were deposited. Large particles (150+/-50 nm diameter) showed a higher cytotoxicity than smaller particles (10+/-3 nm diameter).

Animals↗

PubMed2004

Imaging cells and tissues with refractive index radiology.

Can individual cells, including live cells, be imaged using hard x rays? Common wisdom until now required sophisticated staining techniques for this task. We show instead that individual cells and cell details can be detected in culture solution and tissues with no staining and no other contrast-enhancing preparation. The sample examined can be much thicker than for many other microscopy techniques without sacrificing the capability to resolve cells. The key factor in our approach is the use of a coherent synchrotron source and of contrast mechanisms based on the refractive index. The first successful tests were conducted on a variety of cell systems including skin and internal leaf cells, mouse neurons, rabbit fibroblast cells, and human tumor cells.

Animals↗

PubMed2004

FePt-Ag nanocomposite thin films with longitudinal magnetic anisotropy.

A well-controlled method to fabricate FePt thin films with the (200) texture and longitudinal magnetic anisotropy for high-density magnetic recording media is reported. FePt-Ag nanocomposite thin films with L1(0) ordered FePt grains embedded in an Ag matrix were deposited on the Cr90Ru10/glass by co-sputtering from Ag and FePt targets. The Ag doping suppressed the (001) texture but improved the L1(0) FePt (200) texture. The magnetic easy axis of FePt-Ag thin films changed from perpendicular to longitudinal in direction. In-plane coercivity of the films varied from 0.8 kOe to 6.5 kOe, depending on Ag contents in the films and under-layer thickness. The change from the (001) to (200) texture could be due to the competition of grain-boundary energy and epitaxial-strain energy.

Anisotropy↗

PubMed2001

Structural effects of Ti underlayer on CoCrPt magnetic films.

The effects of long-range and short-range orders of Ti underlayer thickness on the magnetic properties of sputtered Co72 Cr21 Pt7 films were investigated using synchrotron X-ray scattering and X-ray absorption near-edge structure spectroscopy. The results were consistent with that of magnetic measurements and X-ray photoelectron spectroscopy. For thin Ti underlayers (10 nm), the oxidation of Ti and significant mixing of other elements within this underlayer did not promote texture development, further resulting in poor texturing of magnetic films and undesirable magnetic properties. Increased crystallinity and texture of metallic Ti in thicker underlayers enhanced the magnetic peak alignment and its properties.

Chromium Alloys↗

PubMedDate not supplied

Surface-modified diamond nanoparticles as antigen delivery vehicles.

Recognition of antigens by immunocompetent cells involves interactions that are specific to the chemical sequence and conformation of the epitope (antigenic determinant). Adjuvants that are currently used to enhance immunity to antigens tend to either alter the antigen conformation through surface adsorption or shield potentially critical determinants, e.g., functional groups. It is demonstrated here that surface-modified diamond nanoparticles (5-300 nm) provide conformational stabilization, as well as a high degree of surface exposure to protein antigens. By enhancing the availability and activity of the antigen in vivo, a strong, specific immune response can be elicited. Results are demonstrated for mussel adhesive protein (MAP), a substance for which conventional adjuvants have proven only marginally successful in evoking an immune response. Surface-modified diamond nanoparticles as antigen delivery vehicles are a novel example of the exciting marriage of materials science, chemistry, and biology.

Animals↗