Proline-induced constraints in alpha-helices.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to G Némethy.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A method is described for the inclusion of the effects of hydration in empirical conformational energy computations on polypeptides. The free energy of hydration is composed of additive contributions of various functional groups. The hydration of each group is assumed to be proportional to the accessible surface area of the group. The constants of proportionality, representing the free energy of hydration per unit area of accessible surface, have been evaluated for seven classes of groups (occurring in peptides) by least-squares fitting to experimental free energies of solution of small monofunctional aliphatic and aromatic molecules. The same method has also been applied to the modeling of the enthalpy and heat capacity of hydration, each of which is computed from the accessible surface area.
The substitution of hydroxyproline for proline in position Y of the repeating Gly-X-Y tripeptide sequence of collagen-like poly(tripeptide)s (i.e., in the position in which Hyp occurs naturally) is predicted to enhance the stability of aggregates of triple helices, while the substitution of Hyp in position X (where no Hyp occurs naturally) is predicted to decrease the stability of aggregates. Earlier conformational energy computations have indicated that two triple helices composed of poly(Gly-Pro-Pro) polypeptide chains pack preferentially with a nearly parallel orientation of the helix axes [Nemethy, G., & Scheraga, H.A. (1984) Biopolymers 23, 2781-2799]. Conformational energy computations reported here indicate that the same packing arrangement is preferred for the packing of two poly(Gly-Pro-Hyp) triple helices. The OH groups of the Hyp residues can be accommodated in the space between the two packed triple helices without any steric hindrance. They actually contribute about 1.9 kcal/mol per Gly-Pro-Hyp tripeptide to the packing energy, as a result of the formation of weak hydrogen bonds and other favorable noncovalent interatomic interactions. On the other hand, the substitution of Hyp in position X weakens the packing by about 1.7 kcal/mol per Gly-Hyp-Pro tripeptide. Numerous published experimental studies have established that Hyp in position Y stabilizes an isolated triple helix relative to dissociated random coils, while Hyp in position X has the opposite effect. We propose that Hyp in position Y also enhances the stability of the assembly of collagen into microfibrils while, in position X, it decreases this stability.
The analysis of the interactions between regularly folded segments of the polypeptide chain contributes to an understanding of the energetics of protein folding. Conformational energy-minimization calculations have been carried out to determine the favorable ways of packing two right-twisted beta-sheets. The packing of two five-stranded beta-sheets was investigated, with the strands having the composition CH3CO-(L-Ile)6-NHCH3 in one beta-sheet and CH3CO-(L-Val)6-NHCH3 in the other. Two distinct classes of low-energy packing arrangements were found. In the class with lowest energies, the strands of the two beta-sheets are aligned nearly parallel (or antiparallel) with each other, with a preference for a negative orientation angle, because this arrangement corresponds to the best complementary packing of the two twisted saddle-shaped beta-sheets. In the second class, with higher interaction energies, the strands of the two beta-sheets are oriented nearly perpendicular to each other. While the surfaces of the two beta-sheets are not complementary in this arrangement, there is good packing between the corner of one beta-sheet and the interior part of the surface of the other, resulting in a favorable energy of packing. Both classes correspond to frequently observed orientations of beta-sheets in proteins. In proteins, the second class of packing is usually observed when the two beta-sheets are covalently linked, i.e. when a polypeptide strand passes from one beta-sheet to the other, but we have shown here that a large contribution to the stabilization of this packing arrangement arises from noncovalent interactions.
Explore the source record for details and available documents.
The conformation of the cyclic peptide Ac-Cys-Leu-Gla-Gla-Pro-Cys-NHMe, representing the 18-23 disulfide loop of bovine prothrombin, was studied by energy minimization with the ECEPP (Empirical Conformational Energy Program for Peptides) algorithm. Parameters for charge and geometry for the gamma-carboxyglutamic acid (Gla) residue were obtained for inclusion in the ECEPP data set. Construction of the 18-23 cyclic peptide, for which no crystal structure is available, was carried out by using a scheme that took advantage of the constraints imposed by the requirement of disulfide ring closure and utilized known low-energy structures of single residues and dipeptides. Both cis and trans isomers about the Gla 21-Pro 22 peptide bond were considered. The lowest-energy conformation found for the isolated 18-23 cyclic peptide with arbitrary reduction of the charge on the Gla residues (to simulate hydration roughly) is a trans form, differing in energy by 11 kcal-mol-1 from the lowest-energy cis form. However, when the energy calculation includes one model Ca2+ ion, X2+, introduced at a fixed distance of 2.3 A from a single oxygen atom of either of the side-chain carboxyl groups of Gla with the C delta-O-X2+ bond angle fixed at one of three values, the lowest-energy cis conformation is about 1 kcal-mol-1 lower in energy than the lowest-energy trans conformation; i.e. the two structures have similar energies. In these structures, four oxygen atoms, two from each Gla side-chain, approach the model Ca2+ ion closely, in a manner similar to that seen in crystals of calcium alpha-ethylmalonate (Zell, A., Einspahr, H. & Bugg, C.E. (1985) Biochemistry 24, 533-537). It appears that the binding of Ca2+ to the 18-23 cyclic peptide may alter the equilibrium between cis and trans structures such that the fraction of cis isomers is greater in the presence of Ca2+.
The dominant role of local interactions has been demonstrated for the formation of the strongly twisted antiparallel beta-sheet structure consisting of residues 18-35 in bovine pancreatic trypsin inhibitor. Conformational energy minimization has indicated that this beta-sheet has a strong twist even in the absence of the rest of the protein molecule. The twist is maintained essentially unchanged when energy minimization is carried out by starting from the native conformation. By starting from a nontwisted beta-sheet conformation of residues 18-35, a strongly twisted structure (higher in energy than the native) is obtained. The high twist of the native-like beta-sheet is a consequence of its amino acid sequence, but it is enhanced strongly by interchain interactions that operate within the beta-sheet. The existence of the twisted beta-sheet structure does not require the presence of a disulfide bond between residue 14 and residue 38. It actually may facilitate the formation of this bond. Therefore, it is likely that the beta-sheet structure forms during an earlier stage of folding than the formation of this disulfide bond. This study provides an example of the manner in which conformational energy calculations can be used to provide information about the probable pathway of the folding of a protein.
Conformational energy computations have been carried out to determine the favorable ways of packing a right-handed alpha-helix on a right-twisted antiparallel or parallel beta-sheet. Co-ordinate transformations have been developed to relate the position and orientation of the alpha-helix to the beta-sheet. The packing was investigated for a CH3CO-(L-Ala)16-NHCH3 alpha-helix interacting with five-stranded beta-sheets composed of CH3CO-(L-Val)6-NHCH3 chains. All internal and external variables for both the alpha-helix and the beta-sheet were allowed to change during energy minimization. Four distinct classes of low-energy packing arrangements were found for the alpha-helix interacting with both the parallel and the anti-parallel beta-sheet. The classes differ in the orientation of the axis of the alpha-helix relative to the direction of the strands of the right-twisted beta-sheet. In the class with the most favorable arrangement, the alpha-helix is oriented along the strands of the beta-sheet, as a result of attractive non-bonded side-chain-side-chain interactions along the entire length of the alpha-helix. A class with nearly perpendicular orientation of the helix axis to the strands is also of low energy, because it allows similarly extensive attractive interactions. In the other two classes, the helix is oriented diagonally relative to the strands of the beta-sheet. In one of them, it interacts with the convex surface near the middle of the saddle-shaped twisted beta-sheet. In the other, it is oriented along the concave diagonal of the beta-sheet and, therefore, it interacts only with the corner regions of the sheet, so that this packing is energetically less favorable. The packing arrangements involving an antiparallel and a parallel beta-sheet are generally similar, although the antiparallel beta-sheet has been found to be more flexible. The major features of 163 observed alpha/beta packing arrangements in 37 proteins are accounted for in terms of the computed structural preferences. The energetically most favored packing arrangement is similar to the right-handed beta alpha beta crossover structure that is observed in proteins; thus, the preference for this connectivity arises in large measure from this energetically favorable interaction.
Explore the source record for details and available documents.
The solution conformations in DMSO-d6 of the two cyclized dipeptides, cyclo(L-alanyl-L-alanyl-epsilon-aminocaproyl) and cyclo(L-alanyl-D-alanyl-epsilon-aminocaproyl), have been analyzed by means of the two-dimensional nuclear Overhauser effect (2D-NOE). The preferred conformations for the two compounds have been deduced by comparing proton-proton distances, derived from the 2D-NOE data and relaxation-time measurements, with the corresponding distances in several possible computed low-energy conformations. The predominant conformations are a type III bend and a type II bend, respectively, for the two compounds. These conclusions agree with those deduced earlier on the basis of infrared and Raman spectra and circular dichroism measurements.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Normal mode calculations have been carried out on three low-energy structures of gramicidin S obtained from conformational energy calculations. When the results on the amide modes are compared with observed bands in the infrared and Raman spectra of crystalline gramicidin S and its N-deuterated derivative, one of the structures is clearly disfavored. Of the other two, one is slightly favored, and it corresponds to the lowest-energy structure obtained from the energy calculations. Spectra from solutions in DMSO and CH3 OH suggest that the molecular conformation is essentially retained in these solvents.
Conformational energy computations have been carried out for parallel and antiparallel beta-sheets composed of poly-L-Val and poly-L-Ile peptide chains, each consisting of four and of six residues, respectively, with CH3CO- and-NHCH3 end groups. The beta-sheets considered contained three and five equivalent chains, respectively. All computed minimum-energy beta-sheets were found to have a large right-handed twist of a magnitude that corresponds to the mean twist of beta-sheets observed in globular proteins. The twist has the same sign but is much larger than in beta-sheets of poly-L-Ala, because of intra- and interchain interactions between the bulky beta-branched side-chains. While the right-handed twist is a result of intrachain interactions between side-chains in the case of poly-L-Val, these interactions would favor a left-handed twist in poly-L-Ile, and the right-handed twist in the latter is a result of interchain interactions. Parallel beta-sheets are more stable than antiparallel sheets for both poly-L-Val and poly-L-Ile, in contrast to poly-L-Ala. This result agrees with observations on the preferred orientation of the chains in oligopeptides that form beta-structures. It also explains the observed high relative frequencies of occurrence of Val and Ile residues in parallel beta-sheets, as compared with antiparallel sheets, in globular proteins.
Explore the source record for details and available documents.
The distributions of side-chain conformations in 258 crystal structures of oligopeptides have been analyzed. The sample contains 321 residues having side chains that extend beyond the C beta atom. Statistically observed preferences of side-chain dihedral angles are summarized and correlated with stereochemical and energetic constraints. The distributions are compared with observed distributions in proteins of known X-ray structures and with computed minimum-energy conformations of amino acid derivatives. The distributions are similar in all three sets of data, and they appear to be governed primarily by intraresidue interactions. In side chains with no beta-branching, the most important interactions that determine chi 1 are those between the C gamma H2 group and atoms of the neighboring peptide groups. As a result, the g- conformation (chi 1 congruent to -60 degrees) occurs most frequently for rotation around the C alpha-C beta bond in oligopeptides, followed by the t conformation (chi 1 congruent to 180 degrees), while the g+ conformation (chi 1 congruent to 60 degrees) is least favored. In residues with beta-branching, steric repulsions between the C gamma H2 or C gamma H3 groups and backbone atoms govern the distribution of chi 1. The extended (t) conformation is highly favored for rotation around the C beta-C gamma and C gamma-C delta bonds in unbranched side chains, because the t conformer has a lower energy than the g+ and g- conformers in hydrocarbon chains. This study of the observed side-chain conformations has led to a refinement of one of the energy parameters used in empirical conformational energy computations.
Structural parameters, derived from X-ray crystallographic data, have been compiled for 35 derivatives of amino acids, peptides, and related compounds, which contain the N-terminal benzyloxycarbonyl (Z) group. The geometry of the urethane moiety of this end group is closely similar to that of the tert-butoxycarbonyl (Boc) group, except for a relaxation of some bond angles because the Z group is sterically less crowded than the Boc group. For the same reason, the Z group has greater conformational flexibility. As a result, packing forces in the crystal may cause greater deformations of bond angles, resulting in larger variations of observed bond lengths and bond angles than in Boc-peptide crystals. The aromatic rings of the Z end groups tend to stack in crystals. Conformational energy calculations indicate that most conformations of Z-amino acid-N'-methylamides and of corresponding Boc derivatives have similar dihedral angles and relative energies, i.e. the nature of the N-terminal end group has little effect on the conformational preferences of the residue next to it. In particular, the computed fraction of molecules with a cis urethane (C-N) bond is similar for the two derivatives: 0.51 and 0.42 in Boc-Pro-NHCH3 and Z-Pro-NHCH3, respectively, and 0.02 in the two Ala derivatives. There exist several computed conformations of Z-Ala-NHCH3 and Z-Pro-NHCH3 in which the phenyl ring and the C-terminal methylamide group are close to each other. Because of favorable nonbonded interactions, such conformations are of low energy.