PubMed Health⌕ Search

Biomedical subjects

G P Lopez

Publications and source records attributed to G P Lopez.

14 recordsLinked to original sources
PubMed2006

Mussel (Mytilus edulis) byssus deposition in response to variations in surface wettability.

Mussels (Mytilus edulis) are economically important in their role as an aquaculture species and also with regard to marine biofouling. They attach tenaciously to a wide variety of submerged surfaces by virtue of collagenous attachment threads termed 'byssi'. The aim of this study was to characterize the spreading of the byssal attachment plaque, which mediates attachment to the surface, on a range of surfaces in response to changes in wettability. To achieve this, well characterized self-assembled monolayers of omega-terminated alkanethiolates on gold were used, allowing correlation of byssal plaque spreading with a single surface characteristic--wettability. The present results were inconsistent with those from previous studies, in that there was a positive correlation between plaque size and surface wettability; a trend which is not explained by conventional wetting theory for a three-phase system. A recent extension to wetting theory with regard to hydrophilic proteins is discussed and the results of settlement assays are used to attempt reconciliation of these results with those of similar previous studies and, also, with recent data presented for the spreading of Ulva linza spore adhesive.

Adhesiveness↗
PubMed2005

Evidence for vertical phase separation in densely grafted, high-molecular-weight poly(-isopropylacrylamide) brushes in water.

The detailed conformational change of poly(N-isopropylacrylamide) (PNIPAM) brushes at high grafting density in D2O was investigated as a function of temperature using neutron reflection. PNIPAM chains were grafted at high surface density from gold and silicon oxide surfaces by atom transfer radical polymerization. Whereas single layer profiles were observed for temperatures below and above the transition region, bilayer profiles were observed for a narrow range of temperatures near the transition. This nonmonotonic change in the concentration profile with temperature is discussed in the context of theoretical models of vertical phase separation within a brush.

Journal Article↗
PubMed2002

Mixing small volumes for continuous high-throughput flow cytometry: performance of a mixing Y and peristaltic sample delivery.

BACKGROUND: Online mixing for continuous high-throughput flow cytometry has not been previously described. A simple, general high-throughput method for mixing and delivery of submicroliter volumes in laminar flow at low Reynolds numbers would be widely useful. MATERIALS AND METHODS: We describe a micromixing approach that is compatible with commercial autosamplers, flow cytometry, and other detection schemes that require mixing of components that have been introduced into laminar flow. The scheme is based on a previous approach to high-throughput flow cytometry (HyperCyt, Kuckuck et al.: Cytometry 44:83-90, 2001). We showed that samples from multiwell plates that have been picked up by an autosampler can be separated during delivery by the small air bubbles introduced during the transit of the autosampler probe from well to well. Here, a particle sample flowing continuously is brought together in a Y with reagent samples from wells, which have been separated by bubbles. RESULTS: In the effluent stream, the particles and reagents are mixed, most likely as a result of peristaltic action, and reagents from individual wells can be resolved. The sample volumes that can be mixed with this technology are submicroliter in volume, and samples can be mixed at rates up to at least 100/samples per minute. With the current device, carryover between samples can be eliminated if the mixing system is flushed with several volumes of buffer. The anticipated throughput for screening is expected to be at least 20 samples per minute. CONCLUSIONS: The high-throughput approach and peristaltic mixing in HyperCytTM serve to integrate autosamplers with submicroliter detection volumes for analysis in flow cytometry or in microfluidic channels.

Avidin↗
PubMed2002

Performance of in-line microfluidic mixers in laminar flow for high-throughput flow cytometry.

We describe a micromixing approach that is compatible with commercial autosamplers, flow cytometry, and other detection schemes that require the mixing of components that have been introduced into laminarflow. The scheme is based on high-throughput flow cytometry (HyperCyt) where samples from multi-well plates that have been picked up by an autosampler can be separated during delivery by the small air bubbles introduced during the transit of the autosampler probe from well to well. Here, either cell or particle samplesflowing continuously and driven by a syringe are brought together in a Y with reagent samples from wells driven by a peristaltic pump. The mixing is driven by a magnetic microstirrer contained within the sample line. The mixing is assessed using fluorescence of both cell calcium responses and bead-based fluorescence unquenching. In the analysis stream, the particles and reagents are mixed with eithera "wire" or "bar". The bar is more efficient than the wire, and the efficiency of either depends on the spinning action. The high-throughput approach and mixing in HyperCyt integrate autosamplers with submicroliter detection volumes for analysis in flow cytometry or in microfluidic channels.

Equipment Design↗
PubMed2001

Detection of epitope-tagged proteins in flow cytometry: fluorescence resonance energy transfer-based assays on beads with femtomole resolution.

Epitope tagging of expressed proteins is a versatile tool for the detection and purification of the proteins. This approach has been used in protein-protein interaction studies, protein localization, and immunoprecipitation. Among the most popular tag systems is the FLAG epitope tag, which is recognized by three monoclonal antibodies M1, M2, and M5. We describe novel approaches to the detection of epitope-tagged proteins via fluorescence resonance energy transfer on beads. We have synthesized and characterized biotinylated and fluorescein-labeled FLAG peptides and examined the binding of FLAG peptides to commercial streptavidin beads using flow cytometric analysis. A requirement of assay development is the elucidation of parameters that characterize the binding interactions between component systems. We have thus compiled a set of Kd values determined from a series of equilibrium binding experiments with beads, peptides, and antibodies. We have defined conditions for binding biotinylated and fluoresceinated FLAG peptides to beads. Site occupancies of the peptides were determined to be on the order of several million sites per bead and Kd values in the 0.3-2.0 nM range. The affinity for antibody attachment to peptides was determined to be in the low nanomolar range (less than 10 nM) for measurements on beads and solution. We demonstrate the applicability of this methodology to assay development, by detecting femtomole amounts of N-terminal FLAG-bacteria alkaline phosphatase fusion protein. These characterizations form the basis of generalizable and high throughput assays for proteins with known epitopes, for research, proteomic, or clinical applications.

Antibodies↗
PubMed2001

Robust and efficient synthetic method for forming DNA microarrays.

The field of DNA microarray technology has necessitated the cooperative efforts of interdisciplinary scientific teams to achieve its primary goal of rapidly measuring global gene expression patterns. A collaborative effort was established to produce a chemically reactive surface on glass slide substrates to which unmodified DNA will covalently bind for improvement of cDNA microarray technology. Using the p-aminophenyl trimethoxysilane (ATMS)/diazotization chemistry that was developed, microarrays were fabricated and analyzed. This immobilization method produced uniform spots containing equivalent or greater amounts of DNA than commercially available immobilization techniques. In addition, hybridization analyses of microarrays made with ATMS/diazotization chemistry showed very sensitive detection of the target sequence, two to three orders of magnitude more sensitive than the commercial chemistries. Repeated stripping and re-hybridization of these slides showed that DNA loss was minimal, allowing multiple rounds of hybridization. Thus, the ATMS/diazotization chemistry facilitated covalent binding of unmodified DNA, and the reusable microarrays that were produced showed enhanced levels of hybridization and very low background fluorescence.

Adsorption↗
PubMed2000

Iatrogenic exposure to mercury after hepatitis B vaccination in preterm infants.

Thimerosal, a derivative of mercury, is used as a preservative in hepatitis B vaccines. We measured total mercury levels before and after the administration of this vaccine in 15 preterm and 5 term infants. Comparison of pre- and post-vaccination mercury levels showed a significant increase in both preterm and term infants after vaccination. Additionally, post-vaccination mercury levels were significantly higher in preterm infants as compared with term infants. Because mercury is known to be a potential neurotoxin to infants, further study of its pharmacodynamics is warranted.

Hepatitis B↗
PubMed1999

Peptides, antibodies, and FRET on beads in flow cytometry: A model system using fluoresceinated and biotinylated beta-endorphin.

BACKGROUND: Particulate surfaces such as beads are routinely used as platforms for molecular assembly for fundamental and practical applications in flow cytometry. Molecular assembly is transduced as the direct analysis of fluorescence, or as a result of fluorescence resonance energy transfer. Binding of fluorescent ligands to beads sometimes alters their emission yield relative to the unbound ligands. Characterizing the physical basis of factors that regulate the fluorescence yield of bound fluorophores (on beads) is a necessary step toward their rational use as mediators of numerous fluorescence based applications. METHODS: We have examined the binding between two biotinylated and fluoresceinated beta-endorphin peptides and commercial streptavidin beads using flow cytometric analysis. We have analyzed the assembly between a specific monoclonal antibody and an endorphin peptide in solution using resonance energy transfer and compared the results on beads in flow cytometry using steady-state and time-resolved fluorescence. RESULTS: We have defined conditions for binding biotinylated and fluoresceinated endorphin peptides to beads. These measurements suggest that the peptide structure can influence both the intensity of fluorescence and the mode of peptide binding on the bead surface. We have defined conditions for binding antibody to the bead using biotinylated protein A. We compared and contrasted the interactions between the fluoresceinated endorphin peptide and the rhodamine- labeled antibody. In solution we measure a K(d) of <38 nM by resonance energy transfer and on beads 22 nM. DISCUSSION: Some issues important to the modular assembly of a fluorescence resonance energy transfer (FRET) based sensing scheme have been resolved. The affinity of peptides used herein is a function of their solubility in water, and the emission intensity of the bound species depends on the separation distance between the fluorescein and the biotin moiety. This is due to the quasi-specific quenching interaction between the fluorescein and a proximal binding pocket of streptavidin. Detection of antibodies in solution and on beads either by FRET or capture of fluorescent ligands by dark antibodies subsequently enables the determination of K(d) values, which indicate agreement between solution and flow cytometric determinations.

Antibodies↗
PubMed1999

Poison center planning for mass gatherings: the Georgia Poison Center experience with the 1996 Centennial Olympic Games.

BACKGROUND: The host city for the Olympic Games needs to prepare for "the world" to visit. This article is the first published report describing the impact of an event such as the Olympics on poison center services. PLANNING AND ACTIONS: We evaluated our operations and identified potential new demands. Operational aspects reviewed included: staffing; communication with foreign language callers; knowledge of international drug products; telephone access; procedures for disaster response and recovery; poison treatment protocols; and handling of hazardous material releases. We collaborated with local, state, and federal planners to delineate the poison center role and to develop protocols for use in a poisoning, including a hazardous material's release at a densely populated site. We enhanced our capability to respond to unusual incidents by forming new alliances. Fortunately, no such events occurred; these plans were therefore not tested. CONCLUSIONS: The Georgia Poison Center developed and implemented new capabilities for the Centennial Olympic Games. Immediate access to poison center resources would have facilitated the care of poisoned patients at multiple hospitals if this had become necessary. Communities preparing for mass gatherings should capitalize on the common interests of poison centers, hazardous materials specialists, and public safety agencies. Preparations should emphasize the most likely events, while recognizing the possibility of the unexpected. Planning an integrated response allows the talents and resources of participating agencies to be maximally utilized.

Anniversaries and Special Events↗
PubMed1997

Assessment of learning by emergency medicine residents and pharmacy students participating in a poison center clerkship.

An AAPCC-designated poison center developed and validated an objective testing instrument to evaluate learning during a poison center clinical rotation for 2nd-year emergency medicine residents and 5th-year pharmacy students. The examination contained multiple-choice, true-false, and fill-in questions pertaining to basic clinical toxicology. A pretest was administered prior to the rotation and a post-test was administered upon completion of the rotation. Overall pre-test mean was 56.2%; physician pre-test mean was 73.8%, and student pre-test mean was 43.9%. Overall post-test mean was 78.7%; physician post-test mean was 85.7%, and student post-test mean was 81%. Pre-test scores ranged from 21 to 86% for the group, and post-test scores ranged from 68 to 96%. The mean difference in pre-test to post-test score was 26.9%. These data suggest that a poison center rotation can result in significant increases in post-test scores in comparison to pre-test scores.

Clinical Clerkship↗
PubMed1994

Engineering cell shape and function.

An elastomeric stamp, containing defined features on the micrometer scale, was used to imprint gold surfaces with specific patterns of self-assembled monolayers of alkanethiols and, thereby, to create islands of defined shape and size that support extracellular matrix protein adsorption and cell attachment. Through this technique, it was possible to place cells in predetermined locations and arrays, separated by defined distances, and to dictate their shape. Limiting the degree of cell extension provided control over cell growth and protein secretion. This method is experimentally simple and highly adaptable. It should be useful for applications in biotechnology that require analysis of individual cells cultured at high density or repeated access to cells placed in specified locations.

Albumins↗
PubMed1991

TFE-plasma polymerized dermal sheep collagen for the repair of abdominal wall defects.

The aim of this study was to design and evaluate a degradable biomaterial for the repair of abdominal wall defects. Hexamethylenediisocyanate-tanned dermal sheep collagen (HDSC) was plasma-polymerized with tetrafluoroethylene (TFE) which resulted in a hydrophobic surface on the visceral side (TFE-HDSC). Full-thickness abdominal wall defects were made in rats and repaired with HDSC or TFE-HDSC implants. Unmodified HDSC implants showed excellent fixation to the adjacent muscle tissue but intestinal adhesions were observed. These implants showed insufficient strength after four weeks, illustrated by bulging of the peritoneal contents (herniation). Plasma-polymerized implants after four weeks of implantation showed firm incorporation into the surrounding muscle tissue. With one exception there were no bowel adhesions. Fewer herniations were observed, indicating a prolonged degradation period. Further studies on the optimalization of degradation time are in progress.

Abdominal Muscles↗
PubMed1989

Survival of a child despite unusually high blood ethanol levels.

A 30-month-old, 13-kg child reportedly ingested up to 16 ounces of a wine containing 20% ethanol. The child was brought into the emergency department by paramedics, and upon arrival was found to be comatose and unresponsive to deep stimuli but breathing spontaneously. The patient remained unconscious and unresponsive for three hours after admission. Despite an initial blood ethanol level of 98.78 mmol/L (455 mg/dL), recovery was complete without sequelae. Treatment consisted of prompt gastric decontamination and maintenance of adequate hydration and euglycemia. Elimination of ethanol was rapid in this child and appeared to follow first-order kinetics instead of the zero-order kinetics usually observed. To our knowledge, this is the highest initial blood ethanol level reported in a child with survival. Additionally, no significant metabolic or cardiorespiratory derangement occurred. Ethanol toxicity, elimination kinetics, and treatment are discussed.

Accidents, Home↗