PubMed Health⌕ Search

Biomedical subjects

G S Panayiotakis

Publications and source records attributed to G S Panayiotakis.

16 recordsLinked to original sources

Quantitative assessment of hip osteoarthritis based on image texture analysis.

A non-invasive method was developed to investigate the potential capacity of digital image texture analysis in evaluating the severity of hip osteoarthritis (OA) and in monitoring its progression. 19 textural features evaluating patterns of pixel intensity fluctuations were extracted from 64 images of radiographic hip joint spaces (HJS), corresponding to 32 patients with verified unilateral or bilateral OA. Images were enhanced employing custom developed software for the delineation of the articular margins on digitized pelvic radiographs. The severity of OA for each patient was assessed by expert orthopaedists employing the Kellgren and Lawrence (KL) scale. Additionally, an index expressing HJS-narrowing was computed considering patients from the unilateral OA-group. A textural feature that quantified pixel distribution non-uniformity (grey level non-uniformity, GLNU) demonstrated the strongest correlation with the HJS-narrowing index among all extracted features and utilized in further analysis. Classification rules employing GLNU feature were introduced to characterize a hip as normal or osteoarthritic and to assign it to one of three severity categories, formed in accordance with the KL scale. Application of the proposed rules resulted in relatively high classification accuracies in characterizing a hip as normal or osteoarthritic (90.6%) and in assigning it to the correct KL scale category (88.9%). Furthermore, the strong correlation between the HJS-narrowing index and the pathological GLNU (r = -0.9, p<0.001) was utilized to provide percentages quantifying hip OA-severity. Texture analysis may contribute in the quantitative assessment of OA-severity, in the monitoring of OA-progression and in the evaluation of a chondroprotective therapy.

Aged↗

Integrated model for estimating phosphor signal and noise transfer characteristics on medical images: application to CdPO3Cl:Mn phosphor screens.

An integrated model describing the signal and noise transfer characteristics of the objective image quality and information content in phosphor-produced images is presented. In the context of this model, important imaging parameters, namely optical gain, modulation transfer function, noise transfer function, detective quantum efficiency and information capacity were experimentally evaluated using seven laboratory-prepared CdPO3Cl:Mn test phosphor screens of varying coating thickness. This phosphor has been previously shown to exhibit high spectral compatibility properties with the films and optical sensors used in digital imaging systems. Experiments were performed using 50-120 kVp X-rays produced by a medical X-ray unit. Results showed that, for thick screens, optical gain attained peak values close to 200 optical photons per incident X-ray at 50 kVp. The noise transfer function was higher than the modulation transfer function. For the thin screen of 21 mg cm-2, the modulation transfer function was 0.25 at 100 line pairs mm-1, and the corresponding noise transfer function was 0.4. The detection quantum efficiency peak value was 0.22 at 50 kVp. These values are within acceptable performance limits, and, given the phosphor material's high spectral compatibility and medium temporal response, CdPO3Cl:Mn could be considered for use in X-ray detectors of static radiography imaging.

Humans↗

A theoretical model for calculation of the detective quantum efficiency in granular scintillators.

A theoretical model has been developed for calculating the detective quantum efficiency (DQE) of scintillators, by taking into account the internal structure of granular scintillators often used in medical imaging detectors. Scintillators were considered to consist of N elementary thin layers containing spherical scintillating grains of equal size. Grains were assumed to be regularly distributed within each thin layer, the thickness of the latter being equal to the grain diameter. Values of the X-ray absorption and X-ray attenuation coefficients, of the intrinsic X-ray to light conversion efficiency and of the optical scattering and absorption coefficients were used as input data to the model. Optical scattering and optical absorption coefficients were determined by fitting the model to experimental luminescence data. The model was employed to calculate the detective quantum efficiency of La2O2S:Tb, Y2O2S:Tb, Y2O2S:Eu, ZnSCdS:Ag, ZnSCdS:Au,Cu scintillators. Results of the calculations were found close to values published in previous studies.

Journal Article↗

Assessment of the gain transfer function of phosphors for application in medical imaging radiation detectors.

OBJECTIVE: to study various phosphors used in detectors of medical imaging systems by the gain transfer function (GTF), defined in terms of X-ray luminescence efficiency, light spectrum and modulation transfer function. MATERIALS AND METHODS: four phosphor materials, La(2)O(2)S:Tb, Y(2)O(2)S:Tb, Y(2)O(2)S:Eu and Y(2)O(3):Eu were used in the form of fluorescent layers prepared in the laboratory. The GTF was determined at 30 kVp and 80 kVp X-ray tube voltages for various phosphor coating weights. RESULTS: La(2)O(2)S:Tb, which was the highest density and effective atomic number phosphor used, was found to exhibit the best GTF performance at 80 kVp. At 30 kVp, the yttrium based phosphors were found of increased performance. This is mainly due to the proximity of the X-ray energy to the K-absorption edge of yttrium at 17 keV. Europium activated phosphors were found to perform very well when combined with the red sensitive film and the silicon photodiode. CONCLUSION: The GTF may be a useful method for comparing and selecting phosphor materials for use in various medical imaging applications.

Diagnostic Imaging↗

Assessing the information content of phosphor produced medical images: application to Zn2SiO4:Mn phosphor.

In this study a method to assess the information content of medical images produced by phosphors is described. The optical signal emitted by the phosphor after X-ray excitation, the detective quantum efficiency (DQE), expressing the signal-to-noise ratio (SNR) transfer efficiency, and the information capacity were experimentally determined. The method was based on light flux and modulation transfer function (MTF) measurements and was used to assess the imaging performance of the Zn2SiO4:Mn phosphor. The latter was employed in the form of laboratory prepared phosphor layers (test screens). Results showed that high values for optical signal emission and DQE were obtained for medium thickness phosphor layers (56 and 89 mg/cm2) at 20 kVp X-ray tube voltage. The information capacity was found to decrease continuously with phosphor coating weight.

Biophysical Phenomena↗

A method for determining the information capacity of x-ray imaging scintillator detectors by means of luminescence and modulation transfer function measurements.

A method to determine the information capacity of x-ray phosphor screens used in the detectors of medical imaging systems is described. Information capacity was determined via x-ray luminescence efficiency (XLE), modulation transfer function (MTF) and emission spectrum measurements. The method was applied to laboratory prepared screens from commonly employed phosphor materials. The screen coating weight varied from 50 mg cm-2 to 140 mg cm-2. Results indicated that information capacity decreased with screen coating thickness but also depended on intrinsic phosphor properties (density, effective atomic number, intrinsic conversion efficiency, light wavelength). The Gd2O2S:Tb phosphor, exhibiting high density and effective atomic number, was found to be superior to La2O2S:Tb and Y2O2S:Tb.

Electronic Data Processing↗

Evaluating scintillators used in radiation detectors of medical imaging systems by the effective fidelity index method.

OBJECTIVE: The performance of medical X-ray image receptors depends: (1) on the scintillator light emission efficiency; and (2) on the compatibility of the scintillator light spectrum with the spectral sensitivity of the light detector (film, photocathode, or photodiode), employed in conjunction with the scintillator. In this study, a scintillator performance measure, the effective fidelity index (EFI), is defined as function of both the scintillator light emission efficiency and spectral compatibility. MATERIALS AND METHOD: CsI:Na, Gd2O2S:Tb and La2O2S:Tb scintillators were employed in the form of phosphor screens prepared in our laboratory with various coating thicknesses. The screens were irradiated with X-rays employing tube voltages ranging between 50-120 kVp. RESULTS: The EFI performance of CsI:Na was found to increase with screen coating thickness and it was best when combined with the orthochromatic film or the ES/20 photocathode. Gd2O2S:Tb showed peak EFI performance at 70 mg/cm2 coating thickness and it was well combined with the light detectors considered. CONCLUSION: In accordance with our results, CsI:Na may be employed in radiography when adequately protected against humidity. Gd2O2S:Tb suitability for conventional imaging was verified and it was found that it may be useful in all types of digital imaging. La2O2S:Tb could also be used in digital detectors of imaging applications demanding medium X-ray tube voltages.

Gamma Cameras↗

A method to evaluate the performance of X-ray imaging scintillators by means of the brightness-sharpness index (BSI).

PURPOSE: To propose an image quality index, the brightness-sharpness index (BSI), for assessing the quality of the image produced by phosphors of medical imaging detectors. MATERIAL AND METHODS: BSI was evaluated by experimental X-ray luminescence and modulation transfer function measurements. BSI was determined for a number of test phosphor screens prepared from Gd2O2S:Tb, La2O2S:Tb, and Y2O2S:Tb phosphor materials. The screens covered a wide range of coating thicknesses from 50 to 150 mg/cm2 and measurements were performed for X-ray tube voltages between 50 and 120 kVp. RESULTS: Gd2O2S:Tb phosphor exhibited higher brightness and sharpness, as compared to the other phosphor materials, for all screens and X-ray tube voltages used. Best Gd2O2S:Tb performance was observed for thin screens and high tube voltages. La2O2S:Tb exhibited higher BSI values than Y2O2S:Tb for medium and high tube voltages. CONCLUSION: Results showed that phosphor materials of high X-ray detection and X-ray-to-light conversion properties exhibit high BSI values indicating that BSI may provide a means of phosphor performance evaluation for imaging applications.

Humans↗

Evaluating phosphors for use in X-ray image detectors by the effective performance index (EPI) method: application to Eu3+ activated yttrium based materials.

Phosphor materials used in X-ray image receptors were evaluated by the effective performance index (EPI). EPI describes the dependence of image quality on X-ray to light energy conversion and light diffusion processes. EPI was experimentally determined by means of X-ray luminescence (XLE) and MTF measurements performed on Y2O2S:Eu, Y2O3:Eu, and YVO4:Eu phosphors. The spectral compatibility of these materials with optical detectors (films, photocathodes, photodiodes) was also determined. Highest EPI values were obtained for Y2O2S:Eu-GaAs combination at mammographic energies. All phosphors could be of use in digital X-ray imaging being adequately compatible to silicon photodiodes employed in digital detectors.

Europium↗

Europium-activated phosphors for use in X-ray detectors of medical imaging systems.

Three europium-activated phosphors Y2O2S:Eu, Y2O3:Eu, and YVO4:Eu emitting red light were studied to investigate their suitability for radiographic cassettes or digital imaging systems. Screens were prepared from phosphor powders with various coating thicknesses by sedimentation. To assess phosphor light producing efficiency in relation to patient dose, each screen was X-rayed using 40-120 kVp and the number of light photons emitted per X-ray incident was experimentally and theoretically evaluated. Additionally, the capability of the emitted light to sensitize films or to generate electrons in silicon photodiodes used in digital imaging systems was examined. Y2O2S:Eu screens were most efficient in light emission, and when combined with either red sensitive films or Si photodiodes, they were found superior to Y2O3:Eu or YVO4:Eu screens in film grain or electron signal generation. In many cases they were also found superior to terbium-activated phosphors. Provided that several problems related to industrial production (special dyes, reflective backing, crossover effects) are dealt with, those europium-activated screens could be employed in low-tube-voltage radiographic applications.

Europium↗

An investigation of the imaging characteristics of the Y2O2S:Eu3+ phosphor for application in X-ray detectors of digital mammography.

Y2O2S:Eu laboratory prepared screens were evaluated as mammographic image receptors and were compared to similarly prepared screens of Gd2O2S:Tb and Y2O2S:Tb phosphor materials, often used in X-ray imaging detectors. The evaluation was performed by determining the Modulation Transfer Function (MTF) and the spatial frequency dependent Detective Quantum Efficiency (DQE). Y2O2S:Eu exhibited higher DQE values at low frequencies and given its good spectral matching with digital optical detectors, it may be appropriate for use in X-ray digital mammography.

Europium↗

An experimental method to determine the effective luminescence efficiency of scintillator-photodetector combinations used in X-ray medical imaging systems.

The scintillator effective luminescence efficiency, which may be defined in terms of the scintillator's X-ray luminescence efficiency and the scintillator-photodetector spectral matching and geometrical configuration, was studied for various X-ray imaging applications. Four scintillator materials Gd2O2S:Tb, Y2O2S:Tb, ZnSCdS:Ag and CsI:Na were used to prepare test screens. They were evaluated in relation to various photodetectors used in X-ray imaging, such as radiographic films, photocathodes, and photodiodes. Effective luminescence efficiency was determined for a range of X-ray tube voltages (50-140 kVp) by measuring the light flux emitted per unit of incident exposure rate and the spectra of the light emitted by the four scintillators. Scintillator-photodetector combinations resulting in higher image brightness level were determined for different X-ray imaging systems. Findings indicate that CsI:Na is very efficient with orthochromatic radiographic films, Gd2O2S:Tb could be useful in conventional or digital fluoroscopy and in CT and ZnSCdS:Ag could be employed in some medium to low voltage digital radiography applications.

Humans↗

Evaluating x-ray detectors for radiographic applications: a comparison of ZnSCdS:Ag with Gd2O2S:Tb and Y2O2S:Tb screens.

ZnSCdS:Ag was evaluated as a radiographic image receptor and was compared with Gd2O2S:Tb and Y2O2S:Tb phosphors often used in radiography. The evaluation of a radiographic receptor was modelled as a three-step process: (i) determination of light output intensity as related to the input radiation dose, (ii) determination of visible light characteristics with respect to radiographic optical detectors, and (iii) determination of image information transfer efficiency. The light intensity emitted per unit of x-ray exposure rate was measured and theoretically calculated for laboratory prepared screens with coating thicknesses from 20 to 220 mg cm-2 and tube voltages from 50 to 250 kVp. ZnSCdS:Ag light intensity was higher than that of Gd2O2S:Tb or Y2O2S:Tb for tube voltages less than 70 and 80 kVp respectively. ZnSCdS:Ag displayed the highest x-ray to light conversion efficiency (0.207) and had optical properties close to those of Gd2O2S:Tb and Y2O2S:Tb, and its emission spectrum was well matched to optical detectors. The image information transfer properties described by the modulation transfer function, the quantum noise transfer function, and the detective quantum efficiency were calculated for both general radiographic and mammographic conditions and were found to be intermediate between those of Gd2O2S:Tb and Y2O2S:Tb screens. Conclusively, ZnSCdS:Ag is an efficient phosphor well suited to radiography.

Cadmium Compounds↗

Electrocardiographic changes in elderly patients during small bowel enema.

RATIONALE AND OBJECTIVES: Enteroclysis (small-bowel enema) involves the introduction of a large amount of fluid into the small bowel, through a tube, producing small bowel distention. A study was done to determine the incidence of any electrocardiographic changes during enteroclysis with Holter monitoring. METHODS: Continuous electrocardiographic monitoring and 12-lead electrocardiograms were performed in 30 elderly patients undergoing enteroclysis and in 30 control subjects undergoing routine chest, bone, and upper gastrointestinal small bowel follow-up studies. Two channel qualitative and quantitative electrocardiographic analysis was performed by a computerized nontriggered template system. Arrhythmias, change in cardiac axis, conduction defects, pauses, ST segment changes, and ectopics were sought. RESULTS: Increased sympathetic tone resulting in increased heart rate and transient atrial and ventricular ectopics was frequent during enteroclysis compared with the control group. In one patient ventricular tachycardia developed, and two patients had diminished heart rate, but this was attributed to preexisting heart disease and concurrent medication. CONCLUSION: Transient, nonhazardous cardiac arrhythmias are encountered during enteroclysis in elderly patients. These arrhythmias may be attributed to the preexisting heart disease, fear, and anxiety during intubation, or increased sympathetic tone from the enteric loop distention.

Aged↗

An evaluation of the Y2O3:Eu3+ scintillator for application in medical x-ray detectors and image receptors.

The suitability off a Y2O3:Eu3+ scintillator for use in radiation detectors and medical image receptors was studied. Y2O3:Eu3+ was used in the form of laboratory prepared screens of different coating thicknesses. The x-ray luminescence efficiency of the screens was measured for tube voltages between 50-200 kVp and in both transmission and reflection modes of observation. The intrinsic x ray to light conversation efficiency (nc) and other parameters of the Y2O3:Eu3+ phosphor material related to optical scattering, absorption, and reflection were determined. These were used in the calculation of the image transfer characteristics, MTF and zero frequency DQE, for various screen coating thicknesses and x-ray tube voltages. The light emission spectrum of Y2O3:Eu3+ was measured (narrow band peak at 613 nm) and its spectral compatibility to the spectral sensitivity of several commonly employed optical photon detectors was determined. The x-ray luminescence efficiency varied with x-ray tube voltage, attaining maximum value at about 80 kVp for all screen thicknesses. It also varied with coating thickness reaching 25 microW m(-2)/mR s(-1) and 18 microW m(-2)/mR s(-1) at 175 mg/cm2 for reflection and transmission modes, respectively. The intrinsic x ray to light conversion efficiency and the image transfer characteristics were found to be comparable to several commercially used phosphors: nc = 0.095, MTF0.05 ranged between 10 and 25 line pairs per mm and peal values of DQE(0) varied between 0.33 and 0.14 in the coating thickness and kVp ranges useful for x-ray imaging. Spectral compatibility to some red sensitive optical photon detectors was excellent (0.9 or better). Results indicated that Y2O3:Eu3+ is a medium to high overall performance material that could be used in medical x-ray detectors and image receptors.

Biophysical Phenomena↗

Y2O2S:Eu phosphor screens evaluation.

The x-ray luminescence of Y2O2S:Eu phosphor screens is studied both in transmission and in reflection mode observation. Detailed experimental data concerning the dependence of the absolute efficiency on the tube voltage and the screen's thickness are presented and comparisons to another rare earth phosphor material (Y2O2S:Tb) are given. With the help of theoretical calculations based on the Hamaker-Ludwig model all the experimental data are explained and the intrinsic efficiency and scattering coefficients of the phosphor are estimated.

Biophysical Phenomena↗