PubMed Health⌕ Search

Biomedical subjects

G Shen

Publications and source records attributed to G Shen.

At least 19 recordsLinked to original sources

Changes in the physical properties of human premolar cementum after application of 4 weeks of controlled orthodontic forces.

This study was performed to assess the relationship between the magnitude of orthodontic force and physical properties of individual human cementum, and to identify the sites that may be predisposed to root resorption. The findings may assist in relating physical properties of dental root cementum and its susceptibility to root resorption. Sixteen maxillary first premolar teeth were selected in eight orthodontic patients (three males and five females), mean age 14.8 years (range 11.2-17.5 years), requiring first premolar extractions. In each patient, a light orthodontic force of 25 cN was applied buccally using a sectional archwire on the first premolar on one side, while a heavy force of 225 cN was applied to the contralateral side. The teeth were extracted 4 weeks after initial force application. Hardness and elastic modulus were measured on the buccal and the lingual surfaces of the cementum at the cervical, middle, and apical third of the root. The results showed that the mean hardness and elastic modulus of cementum in the light force group were greater than in the heavy force group at all positions. There were highly significant differences in both hardness and elastic modulus between the heavy and light force groups (P < 0.01). The mean hardness and elastic modulus of cementum gradually decreased from the cervical to the apical regions for buccal as well as lingual surfaces in both groups. There was, however, an insignificant difference between hardness and elastic modulus on the buccal surface compared with the lingual surface (P < 0.05). It was concluded that the hardness and elastic modulus of cementum were affected by the application of orthodontics forces.

Adolescent↗

Pb speciation versus TCLP release in army firing range soils.

A series of soil parameter and mineralogical investigative techniques were applied to assess the Pb speciation in four US Army firing range soils that presented significantly different Pb leaching regimes and soil characteristics. Soil gradation tests were complemented by total chemical analyses, X-ray powder diffraction (XRPD), Rietveld quantification, optical microscopy and scanning electron microscopy (SEM) analyses. The bulk geotechnical, mineralogical and chemical analyses pointed to two possible Pb retention mechanisms: precipitation as lead carbonate and sorption in the case of fine-grained soils. Lead speciation and mobility was further investigated by the toxicity characteristic leaching procedure (TCLP) and sequential extraction test (SET). As the TCLP Pb concentrations did not necessarily reflect the total Pb analysis of the soils, the Pb leachability ratio (TCLP/total) was found to be controlled by soil mineralogy and its response to changes in system pH. Geochemical modeling, using Visual MINTEQ, was employed to evaluate the mechanisms that controlled the observed TCLP Pb leaching behavior. It was found that lead carbonate precipitation/dissolution reactions controlled Pb TCLP leachability in all soils, while sorptive phenomena did not seem to play a role even in the case of fine-grained soils. More specifically, TCLP Pb leachability was controlled by the pH, the available Pb and the available carbonate in solution. This indicates that geochemical modeling strongly complimented TCLP Pb analyses. Thus, geochemical modeling is an important assessment tool to evaluate the magnitude of site-specific Pb-related environmental problems in firing range soils. Carbonation reactions, involving metallic Pb, that occur during the SET obscure its ability to reliably ascertain Pb speciation. More specifically, SET lumps the extractable Pb into predetermined phase categories that may not be truly representative of the actual soil mineralogy or dominant forms of Pb in the soil. A thorough geotechnical, mineralogical and chemical investigation of firing range soils, complemented by geochemical modeling, was therefore found to be a more reliable approach to evaluate Pb speciation and TCLP release in firing range soils.

Lead↗

Cephalometric evaluation of condylar and mandibular growth modification: a review.

OBJECTIVE: Based on a wealth of orthodontic archives, this work aims to review the cephalometric analysis systems that can identify the changes in condylar and mandibular position as well as growth direction in response to bite jumping therapy. DESIGN: Numerous cephalometric approaches were screened to testify their feasibility and reliability in accurately depicting the growth modification of the condyle and the mandible. The critical assessment of the working mechanisms of these cephalometric methods was elaborated to help build up the rationale and justification for their clinical use. RESULTS: 1) The changes in condylar and mandibular size, position and growth direction can be identified by using lateral cephalograms with closed-mouth or open-mouth posture. 2) With superimposition methods where the anatomical structures for superimposition registration must be stable and reproducible, the growth modification of the condyle and the mandible between two time-points is qualitatively demonstrated in a diagram if reference lines are not constructed. The growth modification can be quantitatively identified if the reference lines are created. 3) With non-superimposition methods, the size and position of the condyle and the mandible are separately identified for each time-pint by relating them to the stable reference structures. The growth modification between two time-pints is evaluated by comparing the two separate measurements. CONCLUSION: The application of a standardized and well designed cephalometric evaluation system may reduce the bias that attribute to the arbitrariness of the clinical effects of bite jumping functional appliances.

Activator Appliances↗

Beating the miscibility barrier between iron group elements and magnesium by high-pressure alloying.

Iron and magnesium are almost immiscible at ambient pressure. The low solubility of Mg in Fe is due to a very large size mismatch between the alloy components. However, the compressibility of Mg is much higher than that of Fe, and therefore the difference in atomic sizes between elements decreases dramatically with pressure. Based on the predictions of ab initio calculations, we demonstrate in a series of experiments in a multianvil apparatus and in electrically and laser-heated diamond anvil cells that high pressure promotes solubility of magnesium in iron. At the megabar pressure range, more than 10 at. % of Mg can dissolve in Fe and then the alloy can be quenched to ambient conditions. A generality of the concept of high-pressure alloying between immiscible elements is demonstrated by its application to two other Fe group elements, Co and Ni.

Journal Article↗

Skeletal effects of bite jumping therapy on the mandible - removable vs. fixed functional appliances.

UNLABELLED: AUTHORS: Shen G, Hagg U, Darendeliler MA. OBJECTIVE: Based on an extensive review of the literature, the aim of this study was to explore the mainstream consensus on the controversial topic of whether the bite jumping treatment could enhance mandibular growth. DESIGN: The data for removable and fixed functional appliances were respectively comprehended and analyzed with regard to their attributes in mandibular growth modification. Furthermore, numerous reported findings were assessed by relating them to some important factors influencing the effects of bite jumping, such as treatment timing, treatment duration and post-treatment follow-up, to allow for a more objective and accurate evaluation. RESULTS: The key differences between removable and fixed appliances are working hours (intermittent vs. continuous), length of treatment time (long vs. short), optimal treatment timing (before puberty growth vs. at or after puberty spurt), and mode of bite-jumping (considerable vertical opening vs. limited vertical opening). These different features lead to different treatment effects on mandibular and TMJ growth, such as the intensity of possibly increased growth (clinically less significant vs. significant), the direction of enhanced growth (vertical vs. horizontal), and the stability of treatment changes (unstable vs. stable). The short-term or long-term post-treatment relapse mainly relates to the rebound of dental position. CONCLUSION: The immediate effects of bite jumping functional appliances on the mandibular growth enhancement are convincing during actual treatment. This extra gain of growth might be sustainable during the short-term and long-term post-treatment period.

Age Factors↗

The role of type X collagen in facilitating and regulating endochondral ossification of articular cartilage.

UNLABELLED: AUTHOR: Shen G Objective -This review was compiled to explore the role of type X collagen in growth, development and remodeling of articular cartilage by elucidating the linkage between the synthesis of this protein and the phenotypic changes in chondrogenesis and the onset of endochondral ossification. DESIGN: The current studies closely dedicated to elucidating the role of type X collagen incorporating into chondrogenesis and endochondral ossification of articular cartilage were assessed and analyzed to allow for obtaining the mainstream consensus on the bio-molecular mechanism with which type X collagen functions in articular cartilage. RESULTS: There are spatial and temporal correlations between synthesis of type X collagen and occurrence of endochondral ossification. The expression of type X collagen is confined within hypertrophic condrocytes and precedes the embark of endochondral bone formation. Type X collagen facilitates endochondral ossification by regulating matrix mineralization and compartmentalizing matrix components. CONCLUSION: Type X collagen is a reliable marker for new bone formation in articular cartilage. The future clinical application of this collagen in inducing or mediating endochondral ossification is perceived, e.g. the fracture healing of synovial joints and adaptive remodeling of madibular condyle.

Animals↗

Identification of temporal pattern of mandibular condylar growth: a molecular and biochemical experiment.

OBJECTIVES: Based on the phenomenon that expression of type X collagen and capillary endothelium correlates with endochondral ossification, the prime aim of this study was to establish the temporal pattern of condylar growth in Sprague-Dawley rats by biochemically identifying the expression of these two factors. DESIGN: Sprague-Dawley rats were divided into five groups representing five different stages during somatic pubertal growth. In situ hybridization and immunoperoxidase were performed to examine expression of type X collagen in hypertrophic zone and capillary endothelium in erosive zone of condylar cartilage. Computer-assisted imaging analyses were conducted to allow for a quantitative assessment of the expression of these two factors, from which the temporal pattern of condylar growth was inferred. RESULTS: (1) Synthesis of type X collagen and emergence of capillary endothelium were critical factors during the transition of condylar cartilage from chondrogenesis into osteogenesis, a biological pathway that leads to endochondral bone formation, the mode through which the condyle grows. (2) Quantitative analyses revealed the temporal pattern of the expression of these two factors, indicating that the thrust of natural growth of the condyle in the rats occurred in concomitance with somatic pubertal growth, featured by an acceleration starting from day 38, a maximum growth rate on day 56, followed by a decrease afterwards. CONCLUSION: It is suggested that the biochemical examination of growth markers, such as type X collagen, might be a new approach to accurately depict temporal pattern of condylar growth which is too delicate to be reflected by gross measurement not only in Sprague-Dawley rats but potentially also in other species.

Animals↗

The adaptive remodeling of condylar cartilage---a transition from chondrogenesis to osteogenesis.

Mandibular condylar cartilage is categorized as articular cartilage but markedly distinguishes itself in many biological aspects, such as its embryonic origin, ontogenetic development, post-natal growth mode, and histological structures. The most marked uniqueness of condylar cartilage lies in its capability of adaptive remodeling in response to external stimuli during or after natural growth. The adaptation of condylar cartilage to mandibular forward positioning constitutes the fundamental rationale for orthodontic functional therapy, which partially contributes to the correction of jaw discrepancies by achieving mandibular growth modification. The adaptive remodeling of condylar cartilage proceeds with the biomolecular pathway initiating from chondrogenesis and finalizing with osteogenesis. During condylar adaptation, chondrogenesis is activated when the external stimuli, e.g., condylar repositioning, generate the differentiation of mesenchymal cells in the articular layer of cartilage into chondrocytes, which proliferate and then progressively mature into hypertrophic cells. The expression of regulatory growth factors, which govern and control phenotypic conversions of chondrocytes during chondrogenesis, increases during adaptive remodeling to enhance the transition from chondrogenesis into osteogenesis, a process in which hypertrophic chondrocytes and matrices degrade and are replaced by bone. The transition is also sustained by increased neovascularization, which brings in osteoblasts that finally result in new bone formation beneath the degraded cartilage.

Adaptation, Physiological↗

The lifetime of CFC substitutes studied by a network trained with chaotic mapping modified genetic algorithm and DFT calculations.

The hydrohaloalkanes have attracted much attention as potential substitutes of chlorofluorocarbons (CFCs) that deplete the ozone layer and lead to great high global warming. Having a short atmospheric lifetime is very important for the potential substitutes that may also induce ozone depletion and yield high global warming gases to be put in use. Quantitative structure-activity relationship (QSAR) studies were presented for their lifetimes aided by the quantum chemistry parameters including net charges, Mulliken overlaps, E(HOMO) and E(LUMO) based on the density functional theory (DFT) at B3PW91 level, and the C-H bond dissociation energy based on AM1 calculations. Outstanding features of the logistic mapping, a simple chaotic system, especially the inherent ability to search the space of interest exhaustively have been utilized. The chaotic mapping aided genetic algorithm artificial neural network training scheme (CGANN) showed better performance than the conventional genetic algorithm ANN training when the structure of the data set was not favorable. The lifetimes of HFCs and HCs appeared to be greatly dependent on their energies of the highest occupied molecular orbitals. The perference of the RMSRE comparing to RMSE as objective function of ANN training was better for the samples of interest with relatively short lifetimes. C(2)H(6) and C(3)H(8) as potential green substitutes of CFCs present relatively short lifetimes.

Algorithms↗

Large scale association analysis for identification of genes underlying premature coronary heart disease: cumulative perspective from analysis of 111 candidate genes.

BACKGROUND: to date, only three groups have reported data from large scale genetic association studies of coronary heart disease using a case control design. METHODS AND RESULTS: to extend our initial report of 62 genes, we present data for 210 polymorphisms in 111 candidate genes genotyped in 352 white subjects with familial, premature coronary heart disease (onset age for men, 45; for women, 50) and a random sample of 418 population based whites. Multivariate logistic regression analysis was used to compare the distributions of genotypes between cases and the comparison group while controlling for age, sex, body mass, diabetes, and hypertension. Significant associations were found with polymorphisms in thrombospondin-4 (THBS4), thrombospondin-2 (THBS2) and plasminogen activator inhibitor-2 (PAI2), the strongest being with the A387P variant in THBS4 (p = 0.002). The THBS2 and THBS4 associations have since been replicated. We evaluated polymorphisms in 40 genes previously associated with coronary heart disease and found significant (p<0.05) associations with 10: ACE, APOE, F7, FGB, GP1BA, IL1RN, LRP1, MTHFR, SELP, and THPO. For five of these genes, the polymorphism associated in our study was different from that previously reported, suggesting linkage disequilibrium as an explanation for failure to replicate associations consistently across studies. We found strong linkage disequilibrium between polymorphisms within and between genes, especially on chromosome 1q22-q25, a region containing several candidate genes. CONCLUSIONS: despite known caveats of genetic association studies, they can be an effective means of hypothesis generation and complement classic linkage studies for understanding the genetic basis of coronary heart disease.

Adult↗

Nuclear inelastic x-ray scattering of FeO to 48 GPa.

The partial density of vibrational states has been measured for Fe in compressed FeO (wüstite) using nuclear resonant inelastic x-ray scattering. Substantial changes have been observed in the overall shape of the density of states close to the magnetic transition around 20 GPa from the paramagnetic (low pressure) to the antiferromagnetic (high pressure) state. The results indicate that strong magnetoelastic coupling in FeO is the driving force behind the changes in the phonon spectrum of FeO. The paper presents the first observation of changes in the density of terahertz acoustic phonon states under magnetic transition at high pressure.

Journal Article↗

Oxidative dimerization in metallothionein is a result of intermolecular disulphide bonds between cysteines in the alpha-domain.

Upon storage under aerobic conditions metallothioneins (MTs) form a new species, which is characterized by a molecular mass approximately twice the size of monomeric MT and shifted (113/111)Cd- and (1)H-NMR resonances. The investigation of this oxidative dimerization process by NMR spectroscopy allowed us to structurally characterize this MT species that has been described to occur in vivo and might be synthesized under conditions of oxidative stress. The oxidative dimer was characterized by the formation of an intermolecular cysteine disulphide bond involving the alpha-domain, and a detailed analysis of chemical shift changes and intermolecular nuclear Overhauser effects points towards a disulphide bond involving Cys(36). In contrast to the metal-bridged (non-oxidative) dimerization, the metal-cysteine cluster structures in both MT domains remain intact and no conformational exchange or metal-metal exchange was observed. Also in contrast to the many recently reported oxidative processes which involve the beta-domain cysteine groups and result in the increased dynamics of the bound metal ions in this N-terminal domain, we found no evidence for any increased dynamics in the alpha-domain metals following this oxidation. Therefore these findings provide additional corroboration that metal binding in the C-terminal alpha-domain is rather tight, even under conditions of a changing cellular oxidation potential, compared with the more labile/dynamic nature of the metals in the N-terminal beta-domain cluster under similar conditions.

Animals↗

Stability and structure of MgSiO3 perovskite to 2300-kilometer depth in Earth's mantle.

Unexplained features have been observed seismically near the middle (approximately 1700-kilometer depth) and bottom of the Earth's lower mantle, and these could have important implications for the dynamics and evolution of the planet. (Mg,Fe)SiO3 perovskite is expected to be the dominant mineral in the deep mantle, but experimental results are discrepant regarding its stability and structure. Here we report in situ x-ray diffraction observations of (Mg,Fe)SiO3 perovskite at conditions (50 to 106 gigapascals, 1600 to 2400 kelvin) close to a mantle geotherm from three different starting materials, (Mg0.9Fe0.1)SiO enstatite, MgSiO3 glass, and an MgO+SiO2 mixture. Our results confirm the stability of (Mg,Fe)SiO3 perovskite to at least 2300-kilometer depth in the mantle. However, diffraction patterns above 83 gigapascals and 1700 kelvin (1900-kilometer depth) cannot presently rule out a possible transformation from Pbnm perovskite to one of three other possible perovskite structures with space group P2(1)/m, Pmmn, or P4(2)/nmc.

Journal Article↗

Characterization of highly sulfated cyclodextrins.

A class of highly sulfated cyclodextrins (HS-CDs) was developed for enantiomeric separation of chiral compounds by capillary electrophoresis (CE). The HS-CDs were produced by a facile single-step direct sulfation of cyclodextrin using sulfur trioxide-trimethylamine complex in dimethylformamide. Characterization of the HS-CDs by electrospray ionization mass spectrometry and by CE using a well-established indirect detection method indicated the species have very narrow heterogeneity in terms of degree of sulfation. Elemental analysis of the HS-alpha-, beta- and gamma-CDs showed that the average sulfate contents were 11, 12, and 13 per CD molecule, respectively. The 13C NMR of HS-CDs is consistent with the structural assignment of nearly complete sulfation at C-6 primary hydroxyl groups and partial sulfation at the C-2 secondary hydroxyls (>70%), while the C-3 hydroxyls remain unsubstituted. Enantiomeric separation by CE using the HS-CDs as chiral selectors showed that HS-alpha-, beta- and gamma-CDs complement each other by exhibiting different chiral selectivities, resulting in resolution of many chiral neutral, acidic and basic compounds of greatly varying structural features. The part of HS-CD that interacts with the guest molecule during complexation and, therefore, the receiving end of the cyclodextrin hydrophobic bucket was surrounded with largely regiospecifically substituted C-2 sulfates and intact C-3 hydroxyls, both at the equatorial positions. Such global regiospecific structural arrangement in HS-CDs provides differential diasteroisomeric complexation is proposed to be the principal contributing factor in the resolving racemates.

Cyclodextrins↗

Induction of cholesteryl ester transfer protein in adipose tissue and plasma of the fructose-fed hamster.

Cholesteryl ester transfer protein (CETP) plays a pivotal role in the reverse transport of cholesterol and in the remodeling of circulating lipoproteins. While plasma and adipose tissue levels of CETP are affected by a variety of metabolic conditions, the extent of the effects of dietary factors, other than high cholesterol feeding, are not well understood. To further explore this paradigm, male Golden Syrian hamsters were fed for 4 weeks with a 60%-enriched fructose diet (F) and were compared to a matched group of animals fed with a normal chow diet (N). After feeding for 4 weeks, plasma insulin concentrations were lower in animals fed fructose than in control animals (F: 3.3+/-0.8 vs N: 7.4+/-1.9 ng/mL; p<0.03), but there was no significant difference in plasma glucose concentrations between the two groups (F: 138+/-7 vs N: 148+/-10 mg/dL; p>0.05). Fructose-fed animals showed significant increases in plasma triglyceride (F: 269+/-22 vs N: 165+/-22 mg/dL; p<0.01) and plasma cholesterol (F: 150+/-10 vs N: 113+/-6 mg/dL; p<0.02) concentrations compared with control animals. Total CETP activity and immunoreactive mass were higher in the plasma of fructose-fed animals that in that of controls (F: 1036+/-70 vs N: 826+/-43 pmol/h/mL, p<0.04 and F: 24.5+/-3.1 vs N: 37.5+/-4.3 AU, p<0.02, respectively). Adipose tissue CETP mRNA levels, assessed by the very sensitive ribonuclease protection assay, were 53% higher in fructose-fed animals than in controls (F: 14.1+/-2.0 vs N: 9.2+/-1.0 AU over a rRNA control; p<0.04). Adipose tissue CETP activity and immunoreactive mass also showed a statistically significant increase in the fructose-fed hamsters compared with those fed a normal diet (p<0.04). In conclusion, fructose feeding in Syrian hamsters induces a mixed dyslipidemia. These metabolic changes are accompanied by a significant increase in CETP levels, both in plasma and in adipose tissue. This phenomenon suggests that the increase in the expression of adipose tissue CETP may be caused either by the ambient hypercholesterolemia resulting from fructose feeding or by an attenuation of a possible inhibitory effect of plasma insulin concentrations on the expression of adipose tissue CETP in this feeding paradigm.

Adipose Tissue↗

Photosystem stoichiometry and state transitions in a mutant of the cyanobacterium Synechococcus sp. PCC 7002 lacking phycocyanin.

Phycobilisomes (PBS) function as light-harvesting antenna complexes in cyanobacteria, red algae and cyanelles. They are composed of two substructures: the core and peripheral rods. Interposon mutagenesis of the cpcBA genes of Synechococcus sp. PCC 7002 resulted in a strain (PR6008) lacking phycocyanin and thus the ability to form peripheral rods. Difference absorption spectroscopy of whole cells showed that intact PBS cores were assembled in vivo in the cpcBA mutant strain PR6008. Fluorescence induction measurements demonstrated that the PBS cores are able to deliver absorbed light energy to photosystem (PS) II, and fluorescence induction transients in the presence of DCMU showed that PR6008 cells could perform a state 2 to state 1 transition with similar kinetics to that of the wild-type cells. Thus, PBS core assembly, light-harvesting functions and energy transfer to PS I were not dependent upon the assembly of the peripheral rods. The ratio of PS II:PS I in the PR6008 cells was significantly increased, nearly twice that of the wild-type cells, possibly a result of long-term adaptation to compensate for the reduced antenna size of PS II. However, the ratio of PBS cores:chlorophyll remained unchanged. This result indicates that approximately half of the PS II reaction centers in the PR6008 cells had no closely associated PBS cores.

Bacterial Proteins↗

The post-spinel transformation in Mg2SiO4 and its relation to the 660-km seismic discontinuity.

The 660-km seismic discontinuity in the Earth's mantle has long been identified with the transformation of (Mg,Fe)2SiO4 from gamma-spinel (ringwoodite) to (Mg,Fe)SiO3-perovskite and (Mg,Fe)O-magnesiowüstite. This has been based on experimental studies of materials quenched from high pressure and temperature, which have shown that the transformation is consistent with the seismically observed sharpness and the depth of the discontinuity at expected mantle temperatures. But the first in situ examination of this phase transformation in Mg2SiO4 using a multi-anvil press indicated that the transformation occurs at a pressure about 2 GPa lower than previously thought (equivalent to approximately 600 km depth) and hence that it may not be associated with the 660-km discontinuity. Here we report the results of an in situ study of Mg2SiO4 at pressures of 20-36 GPa using a combination of double-sided laser-heating and synchrotron X-ray diffraction in a diamond-anvil cell. The phase transformation from gamma-Mg2SiO4 to MgSiO3-perovskite and MgO (periclase) is readily observed in both the forward and reverse directions. In contrast to the in situ multi-anvil-press study, we find that the pressure and temperature of the post-spinel transformation in Mg2SiO4 is consistent with seismic observations for the 660-km discontinuity.

Journal Article↗