Biomedical subjects

G U Lee

Publications and source records attributed to G U Lee.

9 recordsLinked to original sources

PubMed2000

Advances in the characterization of supported lipid films with the atomic force microscope.

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Air↗

PubMed2000

Implementation of force differentiation in the immunoassay.

A technique has been developed to apply force to the antibody-antigen complex in a solid-phase immunoassay. Force was applied to the immunochemical complex by labeling the secondary antibody with a magnetically susceptible, micrometer-size particle and placing the assay chamber in a magnetic field of defined magnitude and orientation. The force was strong enough to displace weakly bound particles but was not strong enough to rupture the immunochemical complex. The number of particles bound to the surface after applying the differentiation force was related to the analyte concentration, thus an optical detection scheme was developed for counting the number of particles on the surface. The sensitivity of the force differentiation assay was demonstrated to be one to two orders of magnitude higher than conventional solid-phase immunoassay techniques for model protein, virus, and bacterial analytes, with 99% specificity. The enhanced sensitivity of this assay appears to result from lowering the assay background through the identification of weakly adhesive, nonspecific interactions.

Antigen-Antibody Complex↗

PubMed2000

Atomic force microscope image contrast mechanisms on supported lipid bilayers.

This work presents a methodology to measure and quantitatively interpret force curves on supported lipid bilayers in water. We then use this method to correlate topographic imaging contrast in atomic force microscopy (AFM) images of phase-separated Langmuir-Blodgett bilayers with imaging load. Force curves collected on pure monolayers of both distearoylphosphatidylethanolamine (DSPE) and monogalactosylethanolamine (MGDG) and dioleoylethanolamine (DOPE) deposited at similar surface pressures onto a monolayer of DSPE show an abrupt breakthrough event at a repeatable, material-dependent force. The breakthrough force for DSPE and MGDG is sizable, whereas the breakthrough force for DOPE is too small to measure accurately. Contact-mode AFM images on 1:1 mixed monolayers of DSPE/DOPE and MGDG/DOPE have a high topographic contrast at loads between the breakthrough force of each phase, and a low topographic contrast at loads above the breakthrough force of both phases. Frictional contrast is inverted and magnified at loads above the breakthrough force of both phases. These results emphasize the important role that surface forces and mechanics can play in imaging multicomponent biomembranes with AFM.

Diglycerides↗

PubMed1999

Structure, force, and energy of a double-stranded DNA oligonucleotide under tensile loads.

The end-to-end stretching of a duplex DNA oligonucleotide has been studied using potential of mean force (PMF) calculations based on molecular dynamics (MD) simulations and atomic force microscopy (AFM) experiments. Near quantitative agreement between the calculations and experiments was obtained for both the extension length and forces associated with strand separation. The PMF calculations show that the oligonucleotide extends without a significant energetic barrier from a length shorter than A-DNA to a length 2.4 times the contour length of B-DNA at which the barrier to strand separation is encountered. Calculated forces associated with the barrier are 0.09 +/- 0.03 nN, based on assumptions concerning tip and thermal-activated barrier crossing contributions to the forces. Direct AFM measurements show the oligonucleotide strands separating at 2.6 +/- 0.8 contour lengths with a force of 0.13 +/- 0.05 nN. Analysis of the energies from the MD simulations during extension reveals compensation between increases in the DNA-self energy and decreases in the DNA-solvent interaction energy, allowing for the barrierless extension of DNA beyond the canonical B form. The barrier to strand separation occurs when unfavorable DNA interstrand repulsion cannot be compensated for by favorable DNA-solvent interactions. The present combination of single molecule theoretical and experimental approaches produces a comprehensive picture of the free energy surface of biological macromolecular structural transitions.

DNA↗

PubMed1998

A biosensor based on magnetoresistance technology.

We are developing a biosensor that will measure, at the level of single molecules, the forces that bind DNA-DNA, antibody-antigen, or ligand-receptor pairs together. The Bead Array Counter (BARC) will use these interaction forces to hold magnetic microbeads to a solid substrate. Microfabricated magnetoresistive transducers on the substrate will indicate whether or not the beads are removed when pulled by magnetic forces. By adapting magnetoresistive computer memory technology, it may be possible to fabricate millions of transducers on a chip and detect or screen thousands of analytes. The multi-analyte capability of this portable sensor would be ideal for on-site testing, while the potential to directly gauge intermolecular interaction strengths suggests drug discovery applications.

Biosensing Techniques↗

PubMed1998

Characterization of the physical properties of model biomembranes at the nanometer scale with the atomic force microscope.

Interaction forces and topography of mixed phospholipid-glycolipid bilayers were investigated by atomic force microscopy (AFM) in aqueous conditions with probes functionalized with self-assembled monolayers terminating in hydroxy groups. Short-range repulsive forces were measured between the hydroxy-terminated probe and the surface of the two-dimensional (2-D) solid-like domains of distearoyl-phosphatidylethanolamine (DSPE) and digalactosyldiglyceride (DGDG). The form and range of the short-range repulsive force indicated that repulsive hydration/steric forces dominate the interaction at separation distances of 0.3-1.0 nm after which the probe makes mechanical contact with the bilayers. At loads < 5 nN the bilayer was elastically deformed by the probe, while at higher loads plastic deformation of the bilayer was observed. Surprisingly, a short-range repulsive force was not observed at the surface of the 2-D liquid-like dioleoylphosphatidylethanolamine (DOPE) film, despite the identical head groups of DOPE and DSPE. This provides direct evidence for the influence of the structure and mechanical properties of lipid bilayers on their interaction forces, an effect which may be a major importance in the control of biological processes such as cell adhesion and membrane fusion. The step height measured between lipid domains in the AFM topographic images was larger than could be accounted for by the thickness and mechanical properties of the molecules. A direct correlation was observed between the repulsive force range over the lipid domains and the topographic contrast, which provides direct insight into the fundamental mechanisms of AFM imaging in aqueous solutions. This study demonstrates that chemically modified AFM probes can be used in combination with patterned lipid bilayers as a novel and powerful approach to characterize the nanometer scale chemical and physical properties of heterogeneous biosurfaces such as cell membranes.

Diglycerides↗

PubMed1997

Scanning probe microscopy.

During the past year, scanning probe microscopy, especially atomic force microscopy (AFM), has taken root in the biological sciences community, as is evident from the large number of publications and from the variety of specialized journals in which these papers appear. Furthermore, there is a strong indication that the technique is evolving from a qualitative imaging tool to a probe of the critical dimensions and properties of biomolecules and living cells. The next stage of the evolution involves the development of microinstruments for process control and sensing applications. Recent advances have been reported in AFM instrumentation and method. For example, the tapping mode of operation is becoming the method of choice to image biological molecules; work to extend tapping-mode operation in liquids has been reported. Biological molecules can also be imaged at low temperature in a cryo-AFM with improved resolution. The measurement of recognition forces between individual molecules continues to attract much attention and has spawned new concepts for ultra-sensitive biosensors. The AFM is being used increasingly for property measurements such as determining the viscoelastic properties of biological molecules. Finally, structural studies using the AFM abound. Some specific highlights include the mapping of DNA using restriction enzymes, imaging during DNA transcription and determining the mode of drug binding to DNA.

Cell Membrane↗

PubMed1996

Covalent attachment of synthetic DNA to self-assembled monolayer films.

The covalent attachment of thiol-modified DNA oligomers; to self-assembled monolayer silane films on fused silica and oxidized silicon substrates is described. A heterobifunctional crosslinking molecule bearing both thiol- and amino-reactive moieties was used to tether a DNA oligomer (modified at its terminus with a thiol group) to an aminosilane film formed on silica surfaces. A variety of aminosilanes, crosslinkers and treatment conditions have been tested to identify optimal conditions for DNA immobilization using this approach. The DNA films which result have been characterized using UV spectroscopy, water contact angle measurement, radiolabeling and hybridization methods.

Cross-Linking Reagents↗

PubMed1994

Direct measurement of the forces between complementary strands of DNA.

Interaction forces between single strands of DNA were measured with the atomic force microscope by a procedure in which DNA oligonucleotides were covalently attached to a spherical probe and surface. Adhesive forces measured between complementary 20-base strands fell into three distinct distributions centered at 1.52, 1.11, and 0.83 nano-newtons, which are associated with the rupture of the interchain interaction between a single pair of molecules involving 20, 16, and 12 base pairs, respectively. When a third long DNA molecule was coupled between complementary surfaces, both intra- and interchain forces were observed. The intrachain interaction resulting from the molecule's elasticity manifested itself as a long-range cohesive force.

Base Composition↗