PubMed Health⌕ Search

Biomedical subjects

Gérard Férey

Publications and source records attributed to Gérard Férey.

At least 19 recordsLinked to original sources
PubMed2006

Synthesis of MIL-102, a chromium carboxylate metal-organic framework, with gas sorption analysis.

A new three-dimensional chromium(III) naphthalene tetracarboxylate, CrIII3O(H2O)2F{C10H4(CO2)4}1.5.6H2O (MIL-102), has been synthesized under hydrothermal conditions from an aqueous mixture of Cr(NO3)3.9H2O, naphthalene-1,4,5,8-tetracarboxylic acid, and HF. Its structure, solved ab initio from X-ray powder diffraction data, is built up from the connection of trimers of trivalent chromium octahedra and tetracarboxylate moieties. This creates a three-dimensional structure with an array of small one-dimensional channels filled with free water molecules, which interact through hydrogen bonds with terminal water molecules and oxygen atoms from the carboxylates. Thermogravimetric analysis and X-ray thermodiffractometry indicate that MIL-102 is stable up to approximately 300 degrees C and shows zeolitic behavior. Due to topological frustration effects, MIL-102 remains paramagnetic down to 5 K. Finally, MIL-102 exhibits a hydrogen storage capacity of approximately 1.0 wt % at 77 K when loaded at 3.5 MPa (35 bar). The hydrogen uptake is discussed in relation with the structural characteristics and the molecular simulation results. The adsorption behavior of MIL-102 at 304 K resembles that of small-pore zeolites, such as silicalite. Indeed, the isotherms of CO2, CH4, and N2 show a maximum uptake at 0.5 MPa, with no further significant adsorption up to 3 MPa. Crystal data for MIL-102: hexagonal space group P(-)6 (No. 169), a = 12.632(1) A, c = 9.622(1) A.

Journal Article↗
PubMed2006

Microwave synthesis of hybrid inorganic-organic porous materials: phase-selective and rapid crystallization.

Microwave synthesis of two porous nickel glutarates was compared with conventional hydrothermal synthesis. The cubic nickel glutarate, [Ni20(C5H6O4)20(H2O)8] x 40 H2O (1), was synthesized by conventional electrical heating in several hours or days, depending on synthesis temperature. Crystallization was greatly accelerated by microwave irradiation, in which more stable, tetragonal nickel glutarate, [Ni22(C5H6O4)20(OH)4(H2O)10] x 38 H2O (2), was formed within a few minutes, suggesting the efficiency of the microwave technique in the synthesis of porous hybrid materials. The cubic phase 1 is formed preferentially at low pH, low temperature, and especially under conventional electrical heating. In contrast, the tetragonal phase 2 is obtained favorably at high pH, high temperature, and especially with microwave irradiation. This work demonstrates that the microwave method provides not only the very fast synthesis of a hybrid material, but also the possibility to discover a new porous hybrid material not yet identified by conventional hydrothermal synthesis. The hydrothermal formation of metal-organic hybrid materials in a matter of minutes is an important step towards developing commercially viable routes for producing this valuable class of materials.

Journal Article↗
PubMed2006

MIL-96, a porous aluminum trimesate 3D structure constructed from a hexagonal network of 18-membered rings and mu3-oxo-centered trinuclear units.

A new aluminum trimesate Al12O(OH)18(H2O)3(Al2(OH)4)[btc]6.24H2O, denominated MIL-96, was synthesized under mild hydrothermal conditions (210 degrees C, 24 h) in the presence of 1,3,5-benzenetricarboxylic acid (trimesic acid or H3btc) in water. Hexagonal crystals, allowing a single-crystal XRD analysis, are grown from a mixture of trimethyl 1,3,5-benzenetricarboxylate (Me3btc), HF, and TEOS. The MIL-96 structure exhibits a three-dimensional (3D) framework containing isolated trinuclear mu3-oxo-bridged aluminum clusters and infinite chains of AlO4(OH)2 and AlO2(OH)4 octahedra forming a honeycomb lattice based on 18-membered rings. The two types of aluminum groups are connected to each other through the trimesate species, which induce corrugated chains of aluminum octahedra, linked via mu2-hydroxo bonds with the specific -cis-cis-trans- sequence. The 3D framework of MIL-96 reveals three types of cages. Two of them, centered at the special positions 0 0 0 and 2/3 1/3 1/4, have estimated pore volumes of 417 and 635 A3, respectively, and encapsulate free water molecules. The third one has a smaller pore volume and contains disordered aluminum octahedral species (Al(OH)6). The solid-state NMR characterization is consistent with crystal structure and elemental and thermal analyses. The four aluminum crystallographic sites are resolved by means of 27Al 3QMAS technique. This product is able to sorb both carbon dioxide and methane at room temperature (4.4 mmol.g(-1) for CO2 and 1.95 mmol.g(-1) for CH4 at 10 bar) and hydrogen at 77 K (1.91 wt % under 3 bar).

Journal Article↗
PubMed2005

A new isoreticular class of metal-organic-frameworks with the MIL-88 topology.

We report here a new family of isoreticular MOFs, comprising three larger analogues of the nanoporous metallocarboxylate MIL-88; these solids were synthesized using a controlled SBU approach and the three crystal structures were solved using an original simulation-assisted structure determination method in direct space.

Journal Article↗
PubMed2005

Very large swelling in hybrid frameworks: a combined computational and powder diffraction study.

Using a combination of simulations and powder diffraction, we report here the study of the very large swelling of a three-dimensional nanoporous iron(III) carboxylate (MIL-88) which exhibits almost a reversible doubling (approximately 85%) of its cell volume while fully retaining its open-framework topology. The crystal structure of the open form of MIL-88 has been successfully refined and indicates that atomic displacements larger than 4 angstroms are observed when water or various alcohols are adsorbed in the porous structure, revealing an unusually flexible crystallized framework. X-ray thermodiffractometry shows that only a displacive transition occurs during the swelling phenomenon, ruling out any bond breaking.

Journal Article↗
PubMed2005

Different adsorption behaviors of methane and carbon dioxide in the isotypic nanoporous metal terephthalates MIL-53 and MIL-47.

A distinct step in the isotherm occurs during the adsorption of CO2 on MIL-53 at 304 K. Such behavior is neither observed during the adsorption of CH4 on MIL-53 nor during the adsorption on the isostructural MIL-47. This phenomenon seems to be due to a different mechanism than that of previous adsorption steps on MOF samples. It is suggested that a breathing behavior is induced in MIL-53 during CO2 adsorption.

Journal Article↗
PubMed2005

Synthesis and structure of the framework scandium methylphosphonates ScF(H2O)CH3PO3 and NaSc(CH3PO3)2.0.5H2O.

Two framework scandium methylphosphonates have been prepared hydrothermally and their structures solved. ScF(H(2)O)CH(3)PO(3) is a non-porous solid built up from -ScF- chains linked by methylphosphonate groups. The ScO(4)F(2) octahedra are completed by a coordinated water molecule. NaSc(CH(3)PO(3))(2).0.5H(2)O was solved ab initio from high-resolution synchrotron X-ray powder diffraction data. It has a fully connected, negatively charged scandium phosphonate framework where ScO(6) octahedra share vertices with PO(3)CH(3) groups. The solid contains charge balancing sodium cations, coordinated by a water molecule, which may be reversibly removed and adsorbed. The structure of the perdeuterated, dehydrated solid has been refined against neutron powder diffraction data collected at 2.5 K, showing the CD(3) groups in a fully staggered orientation with respect to the phosphonate oxygen atoms.

Journal Article↗
PubMed2005

A ladderlike chain aluminum fluoride ([Al2F8]2-)n with edge-sharing AlF6 octahedra.

A new aluminum fluoride, Al(2)F(8).2NC(5)H(6).C(6)H(3)(CO(2)H)(3), was synthesized under mild hydrothermal conditions (200 degrees C, 3 days) in the presence of 1,3,5-benzenetricarboxylic acid (btc) in pyridine/HF (pyr/HF) solvent. Its structure is characterized with single-crystal XRD analysis and high-resolution solid-state NMR. The inorganic framework consists of the corner- and edge-shared connections of AlF(6) octahedra. They are linked via a common edge and form a bioctahedral motif which is trans-connected through the corner-shared fluorine. It results in the formation of an original infinite double file of AlF(6) octahedra running along the a axis. A high-power decoupled MAS (27)Al{(19)F} Hahn echo NMR spectrum allowed us to distinguish the two crystallographic hexacoordinated Al sites. Four unresolved (19)F NMR signals are observed in the MAS spectra to account for the eight crystallographic fluorine atoms. Half of the terminal fluorine sites interact via strong hydrogen bonds with the ammonium groups of the pyridine moieties. The resulting mixed pyridine-fluoroaluminate chains are intercalated by the btc molecules which are hydrogen-bonded to the remaining free terminal fluoride anions through the protonated carboxylic acid function. The (1)H nuclei of both organic molecules are observed in the protonated form.

Journal Article↗
PubMed2005

An open-framework rare-earth acetylenedicarboxylate: MIL-95, Eu(III)2(H2O)2(CO3)2.{O2C-C2-CO2}.{H2O}x.

The first three-dimensional rare-earth acetylenedicarboxylate solid, MIL-95 (MIL = Material Institut Lavoisier), has been isolated and its structure solved from single-crystal X-ray diffraction data. Its two-dimensional inorganic subnetwork, built up from chains of edge-sharing nine-coordinated europium-capped square antiprisms and carbonate moieties, is pillared by the acetylenedicarboxylate groups. This leads to an open framework where small pores are filled with water molecules interacting with terminal water bound to the metal centers. TGA and X-ray thermodiffractometry show that dehydration leads to an irreversible pore contraction. The whole structure collapses above 230 degrees C. Crystal data for MIL-95: orthorhombic space group Pba2 (No. 32), with a = 7.6762(2) A, b = 17.8448(4) A, and c = 4.8105(2) A.

Journal Article↗
PubMed2005

Isomorphous substitution of transition-metal ions in the nanoporous nickel phosphate VSB-5.

The transition-metal-incorporated nickel phosphate molecular sieves (TMI-VSB-5) have been hydrothermally synthesized at 453 K in weak basic conditions under microwave irradiation. By means of X-ray diffraction, inductively coupled plasma (ICP), ultraviolet-visible (UV-vis) diffuse reflectance, and Mössbauer spectroscopies, successful isomorphous (at least partial) substitution of transition-metal ions in the VSB-5 framework has been verified. Characterization results show that the framework structure of nanoporous VSB-5 can accommodate a substantial level of isomorphous substitution of transition-metal ions up to about 10, 5, and 3 atom % for Fe, Mn, and V, respectively, in both octahedral nickel sites (Mn and Fe) and tetrahedral phosphorus sites (V). The isomorphous substitution including the replacement mechanism was studied by not only the change of unit cell parameters but also spectroscopic analysis. The unit cell parameters of TMI-VSB-5 including a unit cell volume and a-axis length relied on the ionic radii difference between the incorporated ion and the original framework ions such as Ni or P (RTMI - RNi or RTMI - RP).

Journal Article↗
PubMed2005

Crystallized frameworks with giant pores: are there limits to the possible?

In the domain of porous solids with inorganic or hybrid frameworks, the combination of mastered chemistry and of computer simulations pushes forward the limits of the classical approach and allows the full determination from powder diffraction data of architectures with cells of several hundred thousand cubic angstroms with hierarchies of giant pores and unprecedented Langmuir surfaces. The different limits induced by this new approach are analyzed.

Journal Article↗