PubMed Health⌕ Search

Biomedical subjects

Gabriele A Macho

Publications and source records attributed to Gabriele A Macho.

6 recordsLinked to original sources
PubMed2006

Functional significance of the microstructural detail of the primate dentino-enamel junction: a possible example of exaptation.

In primate teeth, the dentino-enamel junction (DEJ) exhibits a scalloped appearance, the functional importance of which has been the subject of various suggestions and speculations. Simplified finite-element (FE) models of DEJ microanatomy were created, both in 2D and 3D, and their biomechanical behavior was tested and compared. Consistently, the models with the scalloped DEJ, although having higher maximum tensile stresses than the straight DEJ models, showed discontinuous concentrations of stress. In straight DEJ models, tensile stresses act at the DEJ over continuous areas in a direction, which would push the two tissues apart, thus leading to delamination of the DEJ. Perhaps even more important, in the scallop model, the net-compression towards the DEJ was consistently higher than net-tension away from it. As a consequence, dentine and enamel would be pushed towards each other during loading (i.e., during mastication). These findings suggest that the scalloped nature of the DEJ confers a biomechanical advantage to the integrity of the tooth during mastication. Furthermore, there exists a correlation between pronounced prism decussation and scallop magnitude, suggesting that scallops may have been selected for in response to high bite forces. However, given the equivocal relationship between scallops and presumed bite force across mammalian taxa, we propose that scallops could in fact be exaptations.

Animals↗
PubMed2006

Automated method to measure trabecular thickness from microcomputed tomographic scans and its application.

Trabeculae form the internal bony mesh work and provide strength to the bone; interconnectivity, overall density, and trabecular thickness are important measures of the integrity of the internal architecture. Such strength is achieved only gradually during ontogeny, whereby an increase in trabecular thickness precedes an increase in mineralization. Loss of bone mass later in life may be compensated for by thickening of the remaining trabeculae. These facts, and the role of trabeculae in mineral homeostasis, highlight the importance of investigating trabecular thickness within and between species. While nondestructive imaging techniques (i.e., muCT and MRI) are becoming increasingly popular, quantification of trabecular thickness using nondestructive techniques has proved difficult owing to limitations imposed by scanning parameters, uniform thresholding, and partial volume averaging. Here we present a computer application, which aims to overcome these problems. Validation is carried out against a phantom and against trabecular thickness measured in corresponding histological sections. Good agreement was found between these measurements. Furthermore, when trabecular thickness is recorded for modern human fetal ilia, a trend toward trabecular thickness increase is found and is in line with reports of ontogenetic morphometric changes using histological sections. However, there are discrepancies. These may in part be due to partial volume effects of obliquely oriented structures. More crucial, however, are problems inherent in histological sections, e.g., shrinkage and distortion, especially where differences in mineralization are concerned; this may affect biological interpretations.

Female↗
PubMed2005

Effect of prism orientation and loading direction on contact stresses in prismatic enamel of primates: implications for interpreting wear patterns.

The ability of prisms to effectively dissipate contact stress at the surface will influence wear rates in teeth. The aim of this investigation was to begin to quantify the effect of prism orientation on surface stresses. Seven finite element models of enamel microstructure were created, each model differing in the angulation of prism orientation with regard to the wear surface. For validation purposes, the mechanical behavior of the model was compared with published experimental data. In order to test the enamel under lateral loads, a compressed food particle was dragged across the surface from the dentino-enamel junction (DEJ) towards the outer enamel surface (OES). Under these conditions, tensile stresses in the enamel model increased with increases in the coefficient of friction. More importantly, stresses were found to be lowest in models in which the prisms approach the surface at lower angles (i.e., more obliquely cut prisms), and highest when the prisms approached the surface at 60 degrees (i.e., less obliquely cut). Finally, the direction of travel of the simulated food particle was reversed, allowing comparison of the difference in behavior between trailing and leading edge enamels (i.e., when the food particle was dragged either towards or away from the DEJ). Stresses at the trailing edge were usually lower than stresses at the leading edge. Taken together with what is known about prism orientation in primate teeth, such findings imply greater wear resistance at the intercuspal region and less wear resistance at the lateral enamel at midcrown. Such findings appear to be supported by archeological evidence.

Animals↗
PubMed2005

Australopithecus anamensis: a finite-element approach to studying the functional adaptations of extinct hominins.

Australopithecus anamensis is the stem species of all later hominins and exhibits the suite of characters traditionally associated with hominins, i.e., bipedal locomotion when on the ground, canine reduction, and thick-enameled teeth. The functional consequences of its thick enamel are, however, unclear. Without appropriate structural reinforcement, these thick-enameled teeth may be prone to failure. This article investigates the mechanical behavior of A. anamensis enamel and represents the first in a series that will attempt to determine the functional adaptations of hominin teeth. First, the microstructural arrangement of enamel prisms in A. anamensis teeth was reconstructed using recently developed software and was compared with that of extant hominoids. Second, a finite-element model of a block of enamel containing one cycle of prism deviation was reconstructed for Homo, Pan, Gorilla, and A. anamensis and the behavior of these tissues under compressive stress was determined. Despite similarities in enamel microstructure between A. anamensis and the African great apes, the structural arrangement of prismatic enamel in A. anamensis appears to be more effective in load dissipation under these compressive loads. The findings may imply that this hominin species was well adapted to puncture crushing and are in some respects contrary to expectations based on macromorphology of teeth. Taking together, information obtained from both finite-element analyses and dental macroanatomy leads us to suggest that A. anamensis was probably adapted for habitually consuming a hard-tough diet. However, additional tests are needed to understand the functional adaptations of A. anamensis teeth fully.

Adaptation, Physiological↗
PubMed2004

On the scaling relationship between enamel prism length and enamel thickness in primate molars: a comment.

As part of a larger study we developed a computer programme which allows the recreation of the complex 3-dimensional arrangement of prisms. Data presented in these earlier publications are re-analyzed to assess the relationship between projected prism length (i. e., enamel thickness) and the true prism length. Across primates, proportional prism deviation increases as the enamel becomes thicker. This supports suggestions that prism decussation may be particularly marked in large-bodied and thick-enameled species. There are differences, however, in scaling relationships between species, which correspond to the species' dietary adaptations. Finally, the findings highlight the importance of employing species-specific correction factors for the calculation of prism length (i.e., life-span of the ameloblast) for life history enquiry.

Animals↗