PubMed Health⌕ Search

Biomedical subjects

Gail E Kilroy

Publications and source records attributed to Gail E Kilroy.

9 recordsLinked to original sources
PubMed2006

Cell growth characteristics and differentiation frequency of adherent equine bone marrow-derived mesenchymal stromal cells: adipogenic and osteogenic capacity.

OBJECTIVES: To characterize equine bone marrow (BM)-derived mesenchymal stem cell (MSC) growth characteristics and frequency as well as their adipogenic and osteogenic differentiation potential. STUDY DESIGN: In vitro experimental study. ANIMALS: Foals (n=3, age range, 17-51 days) and young horses (n=5, age range, 9 months to 5 years). METHODS: Equine MSCs were harvested and isolated from sternal BM aspirates and grown up to passage 10 to determine cell-doubling (CD) characteristics. Limit dilution assays were performed on primary and passaged MSCs to determine the frequency of colony-forming units with a fibroblastic phenotype (CFU-F), and the frequency of MSC differentiation into adipocytes (CFU-Ad) and osteoblasts (CFU-Ob). RESULTS: Initial MSC isolates had a lag phase with a significantly longer CD time (DT=4.9+/-1.6 days) compared with the average DT (1.4+/-0.22 days) of subsequent MSC passages. Approximately 1 in 4224+/-3265 of the total nucleated BM cells displayed fibroblast colony-forming activity. Primary MSCs differentiated in response to adipogenic and osteogenic inductive conditions and maintained their differentiation potential during subsequent passages. CONCLUSIONS: The frequency, in vitro growth rate, and adipogenic and osteogenic differentiation potential of foals and young adult horses are similar to those documented for BM MSCs of other mammalian species. CLINICAL RELEVANCE: The results have direct relevance to the use of BM as a potential source of adult stem cells for tissue engineering applications in equine veterinary medicine.

Adipocytes↗
PubMed2005

Targeted deletion of melanocortin receptor subtypes 3 and 4, but not CART, alters nutrient partitioning and compromises behavioral and metabolic responses to leptin.

Mouse lines with targeted disruption of the cocaine amphetamine-related transcript (CART), melanocortin receptor 3 (MCR3), or melanocortin receptor 4 (MCR4) were used to assess the role of each component in mediating the anorectic and metabolic effects of leptin, and in regulating the partitioning of nutrient energy between fat and protein deposition. Leptin was administered over a 3 day period using either intraperitoneal or intracerebroventricular routes of injection. The absence of MCR4 blocked leptin's ability to increase UCP1 mRNA in both brown and white adipose tissue, but not its ability to reduce food consumption. In contrast, deletion of MCR3 compromised leptin's ability to reduce food consumption, but not its ability to reduce fat deposition or increase UCP1 expression in adipose tissue. Leptin-dependent effects on food consumption and adipocyte gene expression were unaffected by the absence of CART. Repeated measures of body composition over time indicate that the absence of either MCR3 or MCR4, but not CART, increased lipid deposition and produced comparable degrees of adiposity in both lines. Moreover, modest increases in fat content of the diet (4 to 11%) accentuated fat deposition and produced a rapid and comparable 10-12% increase in % body fat in both genotypes. The results indicate that nutrient partitioning, as well as the anorectic and metabolic responses to leptin, are dependent on integrated but separable inputs from the melanocortin 3 and 4 receptor subtypes.

Adipose Tissue↗
PubMed2003

Following the LINEs: an analysis of primate genomic variation at human-specific LINE-1 insertion sites.

The L1 Ta subfamily of long interspersed elements (LINEs) consists exclusively of human-specific L1 elements. Polymerase chain reaction-based screening in nonhuman primate genomes of the orthologous sites for 249 human L1 Ta elements resulted in the recovery of various types of sequence variants for approximately 12% of these loci. Sequence analysis was employed to capture the nature of the observed variation and to determine the levels of gene conversion and insertion site homoplasy associated with LINE elements. Half of the orthologous loci differed from the predicted sizes due to localized sequence variants that occurred as a result of common mutational processes in ancestral sequences, often including regions containing simple sequence repeats. Additional sequence variation included genomic deletions that occurred upon L1 insertion, as well as successive mobile element insertions that accumulated within a single locus over evolutionary time. Parallel independent mobile element insertions at orthologous loci in distinct species may introduce homoplasy into retroelement-based phylogenetic and population genetic data. We estimate the overall frequency of parallel independent insertion events at L1 insertion sites in seven different primate species to be very low (0.52%). In addition, no cases of insertion site homoplasy involved the integration of a second L1 element at any of the loci, but rather largely involved secondary insertions of Alu elements. No independent mobile element insertion events were found at orthologous loci in the human and chimpanzee genomes. Therefore, L1 insertion polymorphisms appear to be essentially homoplasy free characters well suited for the study of population genetics and phylogenetic relationships within closely related species.

Animals↗
PubMed2003

Recently integrated Alu elements and human genomic diversity.

A comprehensive analysis of two Alu Y lineage subfamilies was undertaken to assess Alu-associated genomic diversity and identify new Alu insertion polymorphisms for the study of human population genetics. Recently integrated Alu elements (283) from the Yg6 and Yi6 subfamilies were analyzed by polymerase chain reaction (PCR), and 25 of the loci analyzed were polymorphic for insertion presence/absence within the genomes of a diverse array of human populations. These newly identified Alu insertion polymorphisms will be useful tools for the study of human genomic diversity. Our screening of the Alu insertion loci also resulted in the recovery of several "young" Alu elements that resided at orthologous positions in nonhuman primate genomes. Sequence analysis demonstrated these "young" Alu insertions were the products of gene conversion events of older, preexisting Alu elements or independent parallel forward insertions of older Alu elements in the same short genomic region. The level of gene conversion between Alu elements suggests that it may have an influence on the single nucleotide polymorphism within Alu elements in the genome. We have also identified two genomic deletions associated with the retroposition and insertion of Alu Y lineage elements into the human genome. This type of Alu retroposition-mediated genomic deletion is a novel source of lineage-specific evolution within primate genomes.

Alu Elements↗
PubMed2003

Human DNA quantitation using Alu element-based polymerase chain reaction.

Human forensic casework requires sensitive quantitation of human nuclear DNA from complex sources. Widely used commercially available systems detect both nonhuman and human primate DNA, often require special equipment, and have a detection limit of approximately 0.1ng. Multicopy Alu elements include recently integrated subfamilies that are present in the human genome but are largely absent from nonhuman primates. Here, we present two Alu element-based alternative methods for the rapid identification and quantitation of human DNA, inter-Alu PCR and intra-Alu PCR. Using SYBR green-based detection, the effective minimum threshold level for human DNA quantitation was 0.01ng using inter-Alu- and 0.001ng using intra-Alu-based PCR. Background cross-amplification with nonhuman DNA templates was detected at low levels using inter-Alu-based PCR, but was negligible using intra-Alu-based PCR. These Alu-based methods have several advantages over currently available systems. First, the assays are PCR based and no additional unique equipment is required. Second, the high copy number of subfamily-specific Alu repeats in the human genome makes these assays human specific within a very sensitive linear range. The introduction of these assays to forensic laboratories will undoubtedly increase the sensitivity and specificity of human DNA detection and quantitation from complex sources.

Alu Elements↗
PubMed2003

Comprehensive analysis of two Alu Yd subfamilies.

Alu elements have inserted in the human genome throughout primate evolution. A small number of Alu insertions have occurred after the divergence of humans from nonhuman primates and therefore should not be present in nonhuman primate genomes. Most of these recently integrated Alu elements are contained with a series of discrete Alu subfamilies that are related to each other based upon diagnostic nucleotide substitutions. We have extracted members of the Alu Yd subfamily that are derivatives of the Alu Y subfamily that share a common 12-bp deletion that defines the Yd lineage from the draft sequence of the human genome. Analysis of the Yd Alu elements resulted in the recovery of two new Alu subfamilies, Yd3 and Yd6, which contain a total of 295 members (198 Yd3 and 97 Yd6). DNA sequence analysis of each of the Alu Yd subfamilies yielded age estimates of 8.02 and 1.20 million years old for the Alu Yd3 and Yd6 subfamilies, respectively. Two hundred Alu Yd3 and Yd6 loci were screened using polymerase chain reaction (PCR) assays to determine their phylogenetic origin and associated levels of human genomic diversity. The Alu Yd3 subfamily appears to have started amplifying relatively early in primate evolution and continued propagating albeit at a low level as many of its members are found in a variety of hominoid (humans, greater and lesser ape) genomes. Only two of the elements are polymorphic in the human genome and absent from the genomes of nonhuman primates. By contrast all of the members of the Alu Yd6 subfamily are restricted to the human genome, with 12% of the elements representing insertion polymorphisms in human populations. A single Alu Yd6 locus contained an independent parallel forward insertion of a paralogous Alu Sq sequence in the owl monkey. These Alu subfamilies are a source of genomic fossil relics for the study of primate phylogenetics and human population genetics.

Alu Elements↗
PubMed2002

A comprehensive analysis of recently integrated human Ta L1 elements.

The Ta (transcribed, subset a) subfamily of L1 LINEs (long interspersed elements) is characterized by a 3-bp ACA sequence in the 3' untranslated region and contains approximately 520 members in the human genome. Here, we have extracted 468 Ta L1Hs (L1 human specific) elements from the draft human genomic sequence and screened individual elements using polymerase-chain-reaction (PCR) assays to determine their phylogenetic origin and levels of human genomic diversity. One hundred twenty-four of the elements amenable to complete sequence analysis were full length ( approximately 6 kb) and have apparently escaped any 5' truncation. Forty-four of these full-length elements have two intact open reading frames and may be capable of retrotransposition. Sequence analysis of the Ta L1 elements showed a low level of nucleotide divergence with an estimated age of 1.99 million years, suggesting that expansion of the L1 Ta subfamily occurred after the divergence of humans and African apes. A total of 262 Ta L1 elements were screened with PCR-based assays to determine their phylogenetic origin and the level of human genomic variation associated with each element. All of the Ta L1 elements analyzed by PCR were absent from the orthologous positions in nonhuman primate genomes, except for a single element (L1HS72) that was also present in the common (Pan troglodytes) and pygmy (P. paniscus) chimpanzee genomes. Sequence analysis revealed that this single exception is the product of a gene conversion event involving an older preexisting L1 element. One hundred fifteen (45%) of the Ta L1 elements were polymorphic with respect to insertion presence or absence and will serve as identical-by-descent markers for the study of human evolution.

Animals↗
PubMed2002

Active Alu element "A-tails": size does matter.

Long and short interspersed elements (LINEs and SINEs) are retroelements that make up almost half of the human genome. L1 and Alu represent the most prolific human LINE and SINE families, respectively. Only a few Alu elements are able to retropose, and the factors determining their retroposition capacity are poorly understood. The data presented in this paper indicate that the length of Alu "A-tails" is one of the principal factors in determining the retropositional capability of an Alu element. The A stretches of the Alu subfamilies analyzed, both old (Alu S and J) and young (Ya5), had a Poisson distribution of A-tail lengths with a mean size of 21 and 26, respectively. In contrast, the A-tails of very recent Alu insertions (disease causing) were all between 40 and 97 bp in length. The L1 elements analyzed displayed a similar tendency, in which the "disease"-associated elements have much longer A-tails (mean of 77) than do the elements even from the young Ta subfamily (mean of 41). Analysis of the draft sequence of the human genome showed that only about 1000 of the over one million Alu elements have tails of 40 or more adenosine residues in length. The presence of these long A stretches shows a strong bias toward the actively amplifying subfamilies, consistent with their playing a major role in the amplification process. Evaluation of the 19 Alu elements retrieved from the draft sequence of the human genome that are identical to the Alu Ya5a2 insert in the NF1 gene showed that only five have tails with 40 or more adenosine residues. Sequence analysis of the loci with the Alu elements containing the longest A-tails (7 of the 19) from the genomes of the NF1 patient and the father revealed that there are at least two loci with A-tails long enough to serve as source elements within our model. Analysis of the A-tail lengths of 12 Ya5a2 elements in diverse human population groups showed substantial variability in both the Alu A-tail length and sequence homogeneity. On the basis of these observations, a model is presented for the role of A-tail length in determining which Alu elements are active.

3' Flanking Region↗