Biomedical subjects

Garima Chawla

Publications and source records attributed to Garima Chawla.

8 recordsLinked to original sources

PubMed2007

Modification of the crystal habit of celecoxib for improved processability.

Crystallization is often used in the pharmaceutical industry for purification and isolation of drugs, and also as a means of generating polymorphs or isomorphs. The aim of this study was to investigate the role of extrinsic crystallization parameters on the crystallized product, with special emphasis on improving the mechanical properties of acicular celecoxib. Celecoxib isomorphs were prepared using different techniques (solvent crystallization and vapour diffusion) and crystallization conditions (solvents, stirring, degree of supersaturation, crystallization temperature and seeding). Powder X-ray diffractometry, spectroscopic and thermal methods were used to investigate physical characteristics of crystals. Growth kinetics and aggregation dynamics of crystallization in polar and non-polar solvents were simulated using a dynamic light scattering method. The quick appearance of broad peaks over the range of 10-8000 nm in chloroform during crystallization simulation studies indicated faster aggregation in non-polar solvents. Aspect ratio, flow, compressibility and surface area of recrystallized products were also determined. Surface topography was determined by atomic force microscopy and the lath-shaped crystals (aspect ratio of 2-4) exhibited a roughness index of 1.79 in comparison with 2.92 for needles. Overall, the lath-shaped isomorphs exhibited improved flow and better compressibility.

Calorimetry, Differential Scanning↗

PubMed2006

Quantification of olanzapine polymorphs using powder X-ray diffraction technique.

Accurate quantification of crystalline phases present in drug materials is becoming increasingly important, due to stringent regulatory concerns about polymorph characterization and control in drug substances and products. In the present study, a quantification method for polymorphic forms of olanzapine (OLZ) has been developed using powder X-ray diffraction (PXRD). Preferred orientation has been reported to be the major source of error in PXRD analysis, therefore, prior to development of a quantification method, pure polymorphic forms (I and II) of different size ranges were analyzed. Preferred orientation effect was found to decrease on using sieve fraction BSS # 120/240 for form I. In order to obtain good peak resolution in optimum time, the step time and step size were varied so as to optimize the scan rate. Among the five combinations selected, step size of 0.05 degrees with step time of 5s demonstrated identification of four characteristic peaks of form I in form II in 62 min. A calibration curve was constructed in the range of 0-100% (w/w) using the characteristic peak of form I at 18.48 degrees 2theta (I/I(0) 78.8%). The PXRD assay was reproducible and precise and displayed a LOD of 0.40% (w/w) and LOQ of 1.22% (w/w). Validation results showed excellent correlation between actual and predicted concentrations with R(2) 0.9999.

Antipsychotic Agents↗

PubMed2005

Unbiased membrane permeability parameters for gabapentin using boundary layer approach.

The present study was performed to determine the relative contribution of both passive and nonpassive transport processes in jejunal absorption of gabapentin. The oral absorption of gabapentin was studied using in situ single pass intestinal perfusion technique in fasted rats. Unbiased intrinsic membrane absorption parameters such as maximal flux, Michaelis constant, carrier permeability, and membrane permeability were calculated using a modified boundary layer model. Gabapentin intestinal perfusion results indicate that its jejunal absorption in rats occurs via a nonpassive process, with no significant passive absorption component, as demonstrated by saturable absorption kinetics and its concentration-dependent permeability. A good correlation (r2 = 0.88) between observed human absorption fraction and calculated (from in situ rat intestine) human absorption fraction was obtained.

Algorithms↗

PubMed2005

Impact of solid-state properties on lubrication efficacy of magnesium stearate.

The advent of high-speed tableting and slug capsule-filling machines has ushered in an increasingly important role for the lubricants to enact during manufacturing of dosage forms. Although lubricants help in processing, they can also adversely affect the flow properties and dissolution profile of the drug. It is thus critical to maintain a balance between these two behaviors, by understanding the underlying mechanisms and using their optimum concentration in the formulation. The source and manufacturing process inculcate different solid-state properties to magnesium stearate, the most commonly used lubricant, leading to variations in its lubrication efficacy. However, there has been no complete study relating the lubrication efficacy of magnesium stearate to various levels of solid state. Hence, this study was aimed at comprehensively scrutinizing the role of molecular, particle, and bulk level properties of solid state on the lubrication efficacy of magnesium stearate. A method based on net work done during compression using texture analyzer, was developed and validated to analyze its performance. Particle and bulk-level properties were studied using microscopy, particle size analysis, and particle surface area determination, and molecular level was characterized using thermal, spectroscopic, and crystallographic methods. Interplay of solid-state characteristics such as particle size, degree of agglomeration, and crystal habit were found to markedly influence the lubrication potential of magnesium stearate.

Calorimetry, Differential Scanning↗

PubMed2004

Effect of processing on Celecoxib and its solvates.

Pharmaceuticals mostly exist in crystalline form and exhibit the phenomenon of differential crystal packing and configurational arrangements of molecules, called polymorphism. Pharmaceutical processing by introducing significant amount of stress alters the molecular interactions in the system engendering polymorphic transformations. The energy supplied by these processing steps tends to overcome the energy barriers between different solid-state forms, thus yielding undesirable changes in the physicochemical and material characteristics of drugs or their dosage forms. Therefore, the role of these unit processes in solid-state transformations must be cautiously studied and if required appropriate controls should be used to monitor such events. The present study was aimed at studying the effect of major energy imparting pharmaceutical unit processes, like size reduction, wet granulation, consolidation, and compression on solid-state transformation of Celecoxib, a selective cyclooxygenase-II inhibitor and its N,N-dimethyl acetamide and N,N-dimethyl formamide solvated forms. A qualitative estimation of crystal transformation in processed samples was performed using DSC, microscopy, FTIR spectroscopy, and XRPD. FTIR was also applied for the development of a quantification method to find the percentage of transformation in N,N-dimethyl acetamide solvated form during compression.

Acetamides↗

PubMed2004

Qualitative and quantitative analysis of clopidogrel bisulphate polymorphs.

This study deals with characterization and quantification of form I and form II of clopidogrel bisulphate (CLP), a selective and irreversible inhibitor of ADP-induced platelet aggregation. Thermal (DSC, TGA, HSM), crystallographic (XRD) and spectroscopic (FTIR) methods were used for characterization. After characterization of active pharmaceutical ingredient (API), these techniques were further used for identification of the polymorphic form present in three marketed formulations (tablets). FTIR method was successfully developed and validated for the quantification of form I in polymorph mixtures.

Chemistry, Pharmaceutical↗

PubMed2003

Characterization of solid-state forms of celecoxib.

This study deals with the generation and characterization of various solid-state forms of celecoxib, a selective cyclooxygenase-2 (COX-2) inhibitor. The drug was subjected to polymorphic screen using different solvents to explore the possibility of existence of different solid forms. N,N-Dimethyl acetamide (DMA) and N,N-dimethyl formamide (DMF) yielded solvates in 1:1 stoichiometric ratio. Quench cooling of the melt resulted in amorphous form of the drug. All these solid-state forms were characterized by thermoanalytical (DSC, TGA, HSM), crystallographic (XRD), microscopic (polarized, SEM), spectroscopic (FTIR), and elemental analysis techniques. Solubility and van't Hoff studies were carried out for their thermodynamic interpretation. Influence of morphology of different solid-state forms on flow behavior was also investigated. Molecular modeling studies were used to elucidate the interaction between solute and solvent molecules in the solvate.

Celecoxib↗

PubMedDate not supplied

Physical stability and solubility advantage from amorphous celecoxib: the role of thermodynamic quantities and molecular mobility.

Glassy pharmaceuticals, characterized by excess thermodynamic properties, are theoretically more soluble than their crystalline counterparts. The practical solubility advantage of the amorphous form of celecoxib (CEL) is lost due to its proclivity to lose energy and undergo solvent-mediated devitrification. Theoretical assessment of solubility advantage using differences in isobaric heat capacities (Cp) revealed a 7-21-fold enhancement in the solubility of the amorphous form over that of the crystalline state of CEL. The present study attempts to unveil these differences between experimental and theoretical solubility using thermodynamic parameters such as free energy, enthalpy, and entropy. Amorphous CEL exhibited 1.3-1.5 times enhancement in Cp over that for the crystalline form. The zero and critical molecular mobility regions, represented by Kauzmann temperature (TK) and glass transition temperature (Tg), were found to lie near 246 and 323 K, respectively, for amorphous CEL. The fictive temperature (Tf), an indicator of the configurational entropy of glass, was determined for glassy CEL, signifying the retention of considerable molecular mobility in the glassy phase that may favor nucleation even below Tg. Further, the estimation of various thermodynamic quantities and strength/fragility parameters (D = 11.5 and m = 67.0) postulated the classification of glassy CEL into moderately fragile liquid, as per Angell's classification. A comprehensive understanding of such thermodynamic facets of amorphous form would help in rationalizing the approaches toward development of stable glassy pharmaceuticals with adequate solubility advantage.

Celecoxib↗