PubMed Health⌕ Search

Biomedical subjects

Garrett M Morris

Publications and source records attributed to Garrett M Morris.

10 recordsLinked to original sources

Structural insights into the mechanisms of drug resistance in HIV-1 protease NL4-3.

The development of resistance to anti-retroviral drugs targeted against HIV is an increasing clinical problem in the treatment of HIV-1-infected individuals. Many patients develop drug-resistant strains of the virus after treatment with inhibitor cocktails (HAART therapy), which include multiple protease inhibitors. Therefore, it is imperative that we understand the mechanisms by which the viral proteins, in particular HIV-1 protease, develop resistance. We have determined the three-dimensional structure of HIV-1 protease NL4-3 in complex with the potent protease inhibitor TL-3 at 2.0 A resolution. We have also obtained the crystal structures of three mutant forms of NL4-3 protease containing one (V82A), three (V82A, M46I, F53L) and six (V82A, M46I, F53L, V77I, L24I, L63P) point mutations in complex with TL-3. The three protease mutants arose sequentially under ex vivo selective pressure in the presence of TL-3, and exhibit fourfold, 11-fold, and 30-fold resistance to TL-3, respectively. This series of protease crystal structures offers insights into the biochemical and structural mechanisms by which the enzyme can overcome inhibition by TL-3 while recovering some of its native catalytic activity.

Crystallography, X-Ray↗

Active site binding modes of curcumin in HIV-1 protease and integrase.

Structure models for the interaction of curcumin with HIV-1 integrase (IN) and protease (PR) were investigated using computational docking. Curcumin was found to bind preferentially in similar ways to the active sites of both IN and PR. For IN, the binding site is formed by residues Asp64, His67, Thr66, Glu92, Thr93, Asp116, Ser119, Asn120, and Lys159. Docked curcumin contacts the catalytic residues adjacent to Asp116 and Asp64, and near the divalent metal (Mg2+). In the PR docking, the curcumin structure fitted well to the active site, interacting with residues Asp25, Asp29, Asp30, Gly27', Asp29', and Asp30'. The results suggest that o-hydroxyl and/or keto-enol structures are important for both IN and PR inhibitory actions. The symmetrical structure of curcumin seems to play an important role for binding to the PR protein, whereas the keto-enol and only one side of the terminal o-hydroxyl showed tight binding to the IN active site.

Binding Sites↗

Design and synthesis of broad-based mono- and bi- cyclic inhibitors of FIV and HIV proteases.

Based on the substrate transition state and our strategy to tackle the problem of drug resistance, a series of HIV/FIV protease (HIV /FIV PR) monocyclic inhibitors incorporating a 15- or 17-membered macrocycle with an equivalent P3 or P3' group and a unique unnatural amino acid, (2R, 3S)-3-amino-2-hydroxy-4-phenylbutyric acid, have been designed and synthesized. In addition, based on the structure of TL3 with small P3/P3' group, we have synthesized two conformationally restricted bicyclic inhibitors containing the macrocycle, which mimic the P1/P1'-P3/P3' tripeptide [Phe-Val-Ala] of TL3. We have found that the contribution of the macrocycle in our monocyclic inhibitors is important to the overall activity, but the ring size does not affect the activity to a significant extent. Several inhibitors that were developed in this work, exhibit low nanomolar inhibitory activity against the wild-type HIV/FIV PR and found to be highly effective against some drug-resistant as well as TL3-resistant mutants of HIV PRs. Compound 15, in particular, is the most effective cyclic inhibitor in hand to inhibit FIV replication in tissue culture at a concentration of 1.0 micro g/mL (1.2 microM).

Aspartic Acid Endopeptidases↗

Automated docking of ligands to an artificial active site: augmenting crystallographic analysis with computer modeling.

The W191G cavity of cytochrome c peroxidase is useful as a model system for introducing small molecule oxidation in an artificially created cavity. A set of small, cyclic, organic cations was previously shown to bind in the buried, solvent-filled pocket created by the W191G mutation. We docked these ligands and a set of non-binders in the W191G cavity using AutoDock 3.0. For the ligands, we compared docking predictions with experimentally determined binding energies and X-ray crystal structure complexes. For the ligands, predicted binding energies differed from measured values by +/- 0.8 kcal/mol. For most ligands, the docking simulation clearly predicted a single binding mode that matched the crystallographic binding mode within 1.0 A RMSD. For 2 ligands, where the docking procedure yielded an ambiguous result, solutions matching the crystallographic result could be obtained by including an additional crystallographically observed water molecule in the protein model. For the remaining 2 ligands, docking indicated multiple binding modes, consistent with the original electron density, suggesting disordered binding of these ligands. Visual inspection of the atomic affinity grid maps used in docking calculations revealed two patches of high affinity for hydrogen bond donating groups. Multiple solutions are predicted as these two sites compete for polar hydrogens in the ligand during the docking simulation. Ligands could be distinguished, to some extent, from non-binders using a combination of two trends: predicted binding energy and level of clustering. In summary, AutoDock 3.0 appears to be useful in predicting key structural and energetic features of ligand binding in the W191G cavity.

Automation↗

Structural basis for distinctions between substrate and inhibitor specificities for feline immunodeficiency virus and human immunodeficiency virus proteases.

We used feline immunodeficiency virus (FIV) protease (PR) as a mutational framework to define determinants for the observed substrate and inhibitor specificity distinctions between FIV and human immunodeficiency virus (HIV) PRs. Multiple-substitution mutants were constructed by replacing the residues in and around the active site of FIV PR with the structurally equivalent residues of HIV-1 PR. Mutants included combinations of three critical regions (FIV numbering, with equivalent HIV numbering in superscript): I37(32)V in the active core region; N55(46)M, M56(47)I, and V59(50)I in the flap region; and L97(80)T, I98(81)P, Q99(82)V, P100(83)N, and L101(84)I in the 90s loop region. Significant alterations in specificity were observed, consistent with the involvement of these residues in determining the substrate-inhibitor specificity distinctions between FIV and HIV PRs. Two previously identified residues, I35 and I57 of FIV PR, were intolerant to substitution and yielded inactive PRs. Therefore, we attempted to recover the activity by introducing secondary mutations. The addition of G62(53)F and K63(54)I, located at the top of the flap and outside the active site, compensated for the activity lost in the I57(48)G substitution mutants. An additional two substitutions, D105(88)N and N88(74)T, facilitated recovery of activity in mutants that included the I35(30)D substitution. Determination of K(i) values of potent HIV-1 PR inhibitors against these mutants showed that inhibitor specificity paralleled that of HIV-1 PR. The findings indicate that maintenance of both substrate and inhibitor specificity is a function of interactions between residues both inside and outside the active site. Thus, mutations apparently peripheral to the active site can have a dramatic influence on inhibitor efficacy.

Amino Acid Sequence↗

Conformational changes in nitric oxide synthases induced by chlorzoxazone and nitroindazoles: crystallographic and computational analyses of inhibitor potency.

Nitric oxide is a key signaling molecule in many biological processes, making regulation of nitric oxide levels highly desirable for human medicine and for advancing our understanding of basic physiology. Designing inhibitors to specifically target one of the three nitric oxide synthase (NOS) isozymes that form nitric oxide from the L-Arg substrate poses a significant challenge due to the overwhelmingly conserved active sites. We report here 10 new X-ray crystallographic structures of inducible and endothelial NOS oxygenase domains cocrystallized with chlorzoxazone and four nitroindazoles: 5-nitroindazole, 6-nitroindazole, 7-nitroindazole, and 3-bromo-7-nitroindazole. Each of these bicyclic aromatic inhibitors has only one hydrogen bond donor and therefore cannot form the bidentate hydrogen bonds that the L-Arg substrate makes with Glu371. Instead, all of these inhibitors induce a conformational change in Glu371, creating an active site with altered molecular recognition properties. The cost of this conformational change is approximately 1-2 kcal, based on our measured constants for inhibitor binding to the wild-type and E371A mutant proteins. These inhibitors derive affinity by pi-stacking above the heme and replacing both intramolecular (Glu371-Met368) and intermolecular (substrate-Trp366) hydrogen bonds to the beta-sheet architecture underlying the active site. When bound to NOS, high-affinity inhibitors in this class are planar, whereas weaker inhibitors are nonplanar. Isozyme differences were observed in the pterin cofactor site, the heme propionate, and inhibitor positions. Computational docking predictions match the crystallographic results, including the Glu371 conformational change and inhibitor-binding orientations, and support a combined crystallographic and computational approach to isozyme-specific NOS inhibitor analysis and design.

Amino Acid Sequence↗

Model of the alphaLbeta2 integrin I-domain/ICAM-1 DI interface suggests that subtle changes in loop orientation determine ligand specificity.

The interaction of the alphaLbeta2 integrin with its cellular ligand the intercellular adhesion molecule-1 (ICAM-1) is critical for the tight binding interaction between most leukocytes and the vascular endothelium before transendothelial migration to the sites of inflammation. In this article we have modeled the alphaL subunit I-domain in its active form, which was computationally docked with the D1 domain of the ICAM-1 to probe potential protein-protein interactions. The experimentally observed key interaction between the carboxylate of Glu 34 in the ICAM-1 D1 domain and the metal ion-dependent adhesion site (MIDAS) in the open alphaL I-domain was consistently reproduced by our calculations. The calculations reveal the nature of the alphaLbeta2/ICAM-1 interaction and suggest an explanation for the increased ligand-binding affinity in the "open" versus the "closed" conformation of the alphaL I-domain. A mechanism for substrate selectivity among alphaL, alphaM, and alpha2 I-domains is suggested whereby the orientation of the loops within the I-domain is critical in mediating the interaction of the Glu 34 carboxylate of ICAM-1 D1 with the MIDAS.

Amino Acid Sequence↗

Evolutionary analysis of HIV-1 protease inhibitors: Methods for design of inhibitors that evade resistance.

Drug-resistant strains are rapidly selected during AIDS therapy because of the high rate of mutation in HIV. In this report, we present an evolutionary simulation method for analysis of viral mutation and its use for optimization of HIV-1 protease drugs to improve their robustness in the face of resistance mutation. We first present an analysis of the range of resistant mutants that produce viable viruses by using a volume-based viral fitness model. Then, we analyze how this range of mutant proteases allows development of resistance to an optimal inhibitor previously designed by computational coevolution techniques. Finally, we evaluate the resistance patterns of commercially available drugs, and we discuss how resistance might be overcome by optimizing the size of specific side-chains of these inhibitors.

Acquired Immunodeficiency Syndrome↗

Automated docking to multiple target structures: incorporation of protein mobility and structural water heterogeneity in AutoDock.

Protein motion and heterogeneity of structural waters are approximated in ligand-docking simulations, using an ensemble of protein structures. Four methods of combining multiple target structures within a single grid-based lookup table of interaction energies are tested. The method is evaluated using complexes of 21 peptidomimetic inhibitors with human immunodeficiency virus type 1 (HIV-1) protease. Several of these structures show motion of an arginine residue, which is essential for binding of large inhibitors. A structural water is also present in 20 of the structures, but it must be absent in the remaining one for proper binding. Mean and minimum methods perform poorly, but two weighted average methods permit consistent and accurate ligand docking, using a single grid representation of the target protein structures.

Computer Simulation↗

Defining HIV-1 protease substrate selectivity.

The Aspartyl protease of HIV-1 offers an excellent target for the development of specific drugs against the virus. Drugs against protease and reverse transcriptase form the basis for Highly Active Anti-Retroviral Therapy (HAART) that has been successful in improving survival rates and quality of life for HIV infected individuals. However, resistance development to these drugs is a continuing problem, demanding development of additional drugs and approaches to fight virus infection. A thorough understanding of the molecular basis for substrate and inhibitor specificity is critical to defining mechanisms of evasion by drug-resistant mutants as well as for the rational design of drugs able to inhibit a broad spectrum of HIV-1 variants. In this article, we describe characteristics of the protease structure and what is known regarding substrate diversity and mechanisms of cleavage. Approaches to defining substrate diversity are described as an approach to identifying optimal templates for broad-based inhibitor development.

Animals↗