PubMed Health⌕ Search

Biomedical subjects

Geoffrey W Coates

Publications and source records attributed to Geoffrey W Coates.

At least 19 recordsLinked to original sources
PubMed2006

Semicrystalline thermoplastic elastomeric polyolefins: Advances through catalyst development and macromolecular design.

We report the design, synthesis, morphology, phase behavior, and mechanical properties of semicrystalline, polyolefin-based block copolymers. By using living, stereoselective insertion polymerization catalysts, syndiotactic polypropylene-block-poly(ethylene-co-propylene)-block-syndiotactic polypropylene and isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene triblock copolymers were synthesized. The volume fraction and composition of the blocks, as well as the overall size of the macromolecules, were controlled by sequential synthesis of each block of the polymers. These triblock copolymers, with semicrystalline end-blocks and mid-segments with low glass-transition temperatures, show significant potential as thermoplastic elastomers. They have low Young's moduli, large strains at break, and better than 90% elastic recovery at strains of 100% or less. An isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene pentablock copolymer was synthesized that also shows exceptional elastomeric properties. Notably, microphase separation is not necessary in the semicrystalline isotactic polypropylenes to achieve good mechanical performance, unlike commercial styrenic thermoplastic elastomers.

Journal Article↗
PubMed2006

Two-dimensional double metal cyanide complexes: highly active catalysts for the homopolymerization of propylene oxide and copolymerization of propylene oxide and carbon dioxide.

The synthesis of two-dimensional double metal cyanide complexes of the formula Co(H2O)2[M(CN)4].4H2O (M=Ni, Pd or Pt) and the X-ray crystal structure of Co(H2O)2[Pd(CN)4].4H2O are presented. The anhydrous forms of these complexes were found to be effective catalyst precursors for the homopolymerization of propylene oxide as well as the random copolymerization of propylene oxide and carbon dioxide to produce poly(propylene oxide-co-propylene carbonate) with no propylene carbonate byproduct. A detailed copolymer microstructure is proposed.

Journal Article↗
PubMed2006

Practical beta-lactone synthesis: epoxide carbonylation at 1 atm.

[reaction: see text] A readily prepared bimetallic catalyst is capable of effecting epoxide carbonylation to produce beta-lactones at substantially lower CO pressures than previously reported catalyst systems. A functionally diverse array of beta-lactones is produced in excellent yields at CO pressures as low as 1 atm. This procedure allows for epoxide carbonylation on a multigram scale without the requirement of specialized, high-pressure equipment.

Catalysis↗
PubMed2006

The mechanism of epoxide carbonylation by [Lewis Acid]+[Co(CO)4]- catalysts.

A detailed mechanistic investigation of epoxide carbonylation by the catalyst [(salph)Al(THF)2]+ [Co(CO)4]- (1, salph = N,N'-o-phenylenebis(3,5-di-tert-butylsalicylideneimine), THF = tetrahydrofuran) is reported. When the carbonylation of 1,2-epoxybutane (EB) to beta-valerolactone is performed in 1,2-dimethoxyethane solution, the reaction rate is independent of the epoxide concentration and the carbon monoxide pressure but first order in 1. The rate of lactone formation varies considerably in different solvents and depends primarily on the coordinating ability of the solvent. In mixtures of THF and cis/trans-2,5-dimethyltetrahydrofuran, the reaction is first order in THF. From spectroscopic and kinetic data, the catalyst resting state was assigned to be the neutral (beta-aluminoxy)acylcobalt species (salph)AlOCH(Et)CH2COCo(CO)4 (3a), which was successfully trapped with isocyanates. As the formation of 3a from EB, CO, and 1 is rapid, lactone ring closing is rate-determining. The favorable impact of donating solvents was attributed to the necessity of stabilizing the aluminum cation formed upon generation of the lactone.

Acids↗
PubMed2006

Living polymerization of alpha-olefins with an alpha-diimine Ni(II) catalyst: formation of well-defined ethylene-propylene copolymers through controlled chain-walking.

A C2-symmetric Ni(II) catalyst was found to polymerize alpha-olefins with high levels of omega,2-regiochemistry. The resulting products are ethylene-propylene-type copolymers with methylene sequences of precise length between methyl branches. Modification of reaction conditions can introduce omega,1-enchainments into the polymers which increases the average length of methylene sequences between methyl branches.

Journal Article↗
PubMed2006

Real-time analysis of enzymatic surface-initiated polymerization using surface plasmon resonance (SPR).

The kinetics of enzymatic surface-initiated polymerization of PHB on gold surface has been examined by SPR and the resultant polymer layers characterized by AFM and FT-IR spectrometry. The immobilized enzyme catalyzed surface-initiated polymerization of 3HB-CoA, resulting in the formation of a polymer brush on the surface. The rate of polymer growth from the surface was monitored by SPR in real-time. Polymer growth as measured by the increase in the resonance angle showed no apparent lag phase during the polymerization reaction. SPR analysis also revealed that the thickness of the polymer film could be controlled by varying the initial enzyme density on the surface. The average thicknesses of the PHB film after polymerization reaction were 95, 45 and 15 nm for the surfaces that were treated with 0.5, 0.3 and 0.1*10(-6) M of enzyme, respectively. The binding of PHA synthase at different concentration to the mixed SAMs and subsequent polymerization.

Acyltransferases↗
PubMed2005

Copolymerization of cyclohexene oxide and carbon dioxide using (salen)Co(III) complexes: synthesis and characterization of syndiotactic poly(cyclohexene carbonate).

Synthetic routes to a series of new (salen-1)CoX (salen-1 = N,N'-bis(salicylidene)-1,2-diaminoalkane; X = halide or carboxylate) species are described and the X-ray crystal structures of two (salen-1)CoX (salen- = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-diaminocyclohexane; X = Cl, I) complexes are presented. (R,R)-(salen-)CoX (X = Cl, Br, I, OAc, pentafluorobenzoate (OBzF(5))) catalysts are active for the copolymerization of cyclohexene oxide (CHO) and CO(2), yielding syndiotactic poly(cyclohexene carbonate) (PCHC), a previously unreported PCHC microstructure. Variation of the salen ligand and reaction conditions, as well as the inclusion of [PPN]Cl ([PPN]Cl = bis(triphenylphosphine)iminium chloride) cocatalysts, has dramatic effects on the polymerization rate and the resultant PCHC tacticity. Catalysts rac-(salen-)CoX (salen- = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-diaminopropane; X = Br, OBzF(5)) have high activities for CHO/CO(2) copolymerization, yielding syndiotactic PCHCs with up to 81% r-centered tetrads. Using Bernoullian statistical methods, PCHC tetrad and triad sequences were assigned in the (13)C NMR spectra of these polymers in the carbonyl and methylene regions, respectively.

Journal Article↗
PubMed2005

Acid-catalyzed ortho-alkylation of anilines with styrenes: an improved route to chiral anilines with bulky substituents.

[reaction: see text] Reaction of para-substituted anilines with styrene derivatives at elevated temperatures, when catalyzed by CF3SO3H, results in highly chemoselective ortho-alkylation of the aniline. When R = H, dialkylation can be achieved by varying the ratio of styrene to aniline. Several different substituted anilines and styrenes were examined, and good yields (42-87%) were obtained, except in the case where electron-withdrawing substituents are present on the styrene.

Journal Article↗
PubMed2005

A C2-symmetric, living alpha-diimine Ni(II) catalyst: regioblock copolymers from propylene.

An isomerically pure, C2-symmetric Ni(II) complex was synthesized and found to be living for propylene polymerization. The regioselectivity of the catalyst varied greatly with reaction temperature, with regioregular, highly isotactic polypropylene (PP) produced at low temperatures, and regioirregular PP produced at high temperatures. Regioblock PP was formed by changing the reaction temperature during the polymerization.

Alkenes↗
PubMed2005

Chromium(III) octaethylporphyrinato tetracarbonylcobaltate: a highly active, selective, and versatile catalyst for epoxide carbonylation.

The development of a highly active and selective porphyrin-based epoxide carbonylation catalyst, [(OEP)Cr(THF)2][Co(CO)4] (1; OEP = octaethylporphyrinato; THF = tetrahydrofuran), is detailed. Complex 1 is a separated ion pair composed of a tetracarbonylcobaltate anion and an octahedral chromium porphyrin complex axially ligated by two THF ligands. Regarding the carbonylation of epoxides to beta-lactones, catalyst 1 exhibits excellent turnover numbers (up to 10,000) and turnover frequencies (up to 1670 h(-1)), with regioselective carbonyl insertion occurring between the oxygen and the sterically less hindered carbon of the epoxide substrate. Complex 1 is highly tolerant of nonprotic functional groups, carbonylating an array of aliphatic and cycloaliphatic epoxides, as well as epoxides with pendant ethers, esters, and amides. With careful control of reaction conditions in the carbonylation of glycidyl esters, the exclusive production of either the beta- or gamma-lactone isomer was achieved. Through analysis of reaction stereochemistry, a mechanism for the formation of gamma-lactone products was proposed. Overall, a broad array of synthetically useful lactones has been synthesized in a rapid and selective fashion by catalytic carbonylation using [(OEP)Cr(THF)2][Co(CO)4].

Journal Article↗
PubMed2005

Cobalt catalysts for the alternating copolymerization of propylene oxide and carbon dioxide: combining high activity and selectivity.

Synthetic pathways to (salcy)CoX (salcy = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-diaminocyclohexane; X = halide or carboxylate) complexes are described. Complexes (R,R)-(salcy)CoCl, (R,R)-(salcy)CoBr, (R,R)-(salcy)CoOAc, and (R,R)-(salcy)CoOBzF(5) (OBzF(5) = pentafluorobenzoate) are highly active catalysts for the living, alternating copolymerization of propylene oxide (PO) and CO(2), yielding poly(propylene carbonate) (PPC) with no detectable byproducts. The PPC generated using these catalyst systems is highly regioregular and has up to 99% carbonate linkages with a narrow molecular weight distribution (MWD). Inclusion of the cocatalysts [PPN]Cl or [PPN][OBzF(5)] ([PPN] = bis(triphenylphosphine)iminium) with complex (R,R)-(salcy)CoCl, (R,R)-(salcy)CoBr, or (R,R)-(salcy)CoOBzF(5) results in remarkable activity enhancement of the copolymerization as well as improved stereoselectivity and regioselectivity with maximized reactivity at low CO(2) pressures. In the case of [PPN]Cl with (R,R)-(salcy)CoOBzF(5), an unprecedented catalytic activity of 620 turnovers per hour is achieved for the copolymerization of rac-PO and CO(2), yielding iso-enriched PPC with 94% head-to-tail connectivity. The stereochemistry of the monomer and catalyst used in the copolymerization has dramatic effects on catalytic activity and the PPC microstructure. Using catalyst (R,R)-(salcy)CoBr with (S)-PO/CO(2) generates highly regioregular PPC, whereas using (R)-PO/CO(2) with the same catalyst gives an almost completely regiorandom copolymer. The rac-PO/CO(2) copolymerization with catalyst rac-(salcy)CoBr yields syndio-enriched PPC, an unreported PPC microstructure. In addition, (R,R)-(salcy)CoOBzF(5)/[PPN]Cl copolymerizes (S)-PO and CO(2) with a turnover frequency of 1100 h(-1), an activity surpassing that observed in any previously reported system.

Journal Article↗
PubMed2004

New phenoxyketimine titanium complexes: combining isotacticity and living behavior in propylene polymerization.

A series of titanium bis(phenoxyketimine) olefin polymerization catalysts were synthesized and screened for propylene polymerization. The phenoxyketimine ligands contain pentafluorophenyl N-aryl groups and ortho-phenol substituents of varying size. Catalysts with ortho-phenol substituents of intermediate size produce living, substantially isotactic polypropylene. The living nature of these catalyst systems is demonstrated through the synthesis of block copolymers with narrow molecular weight distributions.

Journal Article↗
PubMed2004

Discrete metal-based catalysts for the copolymerization of CO2 and epoxides: discovery, reactivity, optimization, and mechanism.

Most synthetic polymers are made from petroleum feedstocks. Given the non-renewable nature of these materials, there is increasing interest in developing routes to polymeric materials from renewable resources. In addition, there is a growing demand for biodegradable polymeric materials. Polycarbonates made from CO(2) and epoxides have the potential to meet these goals. Since the discovery of catalysts for the copolymerization of CO(2) and epoxides in the late 1960's by Inoue, a significant amount of research has been directed toward the development of catalysts of improved activity and selectivity. Reviewed here are well-defined catalysts for epoxide-CO(2) copolymerization and related reactions.

Journal Article↗
PubMed2004

Alternating copolymerization of limonene oxide and carbon dioxide.

The alternating copolymerization of (R)- or (S)-limonene oxide and CO2 using beta-diiminate zinc acetate catalysts is reported. At 100 psi CO2 and 25 degrees C, the catalyst exhibits a high selectivity for the trans isomer and produces regioregular polycarbonate. The copolymer contains >99% carbonate linkages, a narrow molecular weight distribution, and an Mn value consistent with the [epoxide]/[Zn] ratio.

Carbon Dioxide↗