PubMed Health⌕ Search

Biomedical subjects

Georg E Schulz

Publications and source records attributed to Georg E Schulz.

At least 19 recordsLinked to original sources

Structure and catalytic mechanism of L-rhamnulose-1-phosphate aldolase.

The structure of L-rhamnulose-1-phosphate aldolase has been established at 1.35 A resolution in a crystal form that was obtained by a surface mutation and has one subunit of the C(4)-symmetric tetramer in the asymmetric unit. It confirms an earlier 2.7 A resolution structure which was determined in a complicated crystal form with 20 subunits per asymmetric unit. The chain fold and the active center are similar to those of L-fuculose-1-phosphate aldolase and L-ribulose-5-phosphate 4-epimerase. The active center similarity is supported by a structural comparison of all three enzymes and by the binding mode of the inhibitor phosphoglycolohydroxamate at the site of the product dihydroxyacetone phosphate for the two aldolases. The sensitivity of the catalytic rate to several mutations and a comparison with the established mechanism of the related aldolase give rise to a putative catalytic mechanism. This mechanism involves the same binding mode of the second product L-lactaldehyde in both aldolases, except for a 180 degrees flip of the aldehyde group distinguishing between the two epimers rhamnulose and fuculose. The N-terminal domain exhibits a correlated anisotropic mobility that channels the isotropic Brownian motion into a directed movement of the catalytic base and the substrate phosphate on the N-domain toward the zinc ion and the lactaldehyde on the C-terminal domain. We suggest that this movement supports the catalysis mechanically.

Aldehyde-Lyases↗

Substrate binding and catalysis of ecto-ADP-ribosyltransferase 2.2 from rat.

The structures of beta-methylenethiazole-4-carboxamide adenine dinucleotide (TAD), NAD(+), and NADH as bound to ecto-ADP-ribosyltransferase 2.2 from rat and to its mutants E189I and E189A, respectively, have been established. The positions and conformations of NAD(+) and its analogues agree in general with those in other ADP-ribosyltransferases. The kinetic constants for NAD(+) hydrolysis were determined by RP-HPLC. The specific activity amounts to 26 units/mg, which is 6000-fold higher than a previously reported rate and 500-fold higher than the hydrolysis rates of other ADP-ribosyltransferases, confirming that hydrolysis is the major function of this enzyme. On the basis of structures and mutant activities, a catalytic mechanism is proposed. The known auto-ADP-ribosylation of the enzyme at the suggested position R184 is supported by one of the crystal structures where the nucleophile position is occupied by an Neta atom of this arginine which in turn is backed up by the base E159.

ADP Ribose Transferases↗

Crystal structure of the avilamycin resistance-conferring methyltransferase AviRa from Streptomyces viridochromogenes.

The emergence of antibiotic-resistant bacterial strains is a widespread problem in contemporary medical practice and drug design. It is therefore important to elucidate the underlying mechanism in each case. The methyltransferase AviRa from Streptomyces viridochromogenes mediates resistance to the antibiotic avilamycin, which is closely related to evernimicin, an oligosaccharide antibiotic that has been used in medical studies. The structure of AviRa was determined by X-ray diffraction at 1.5A resolution. Phases were obtained from one selenomethionine residue introduced by site-directed mutagenesis. The chain-fold is similar to that of most methyltransferases, although AviRa contains two additional helices as a specific feature. A putative-binding site for the cofactor S-adenosyl-L-methionine was derived from homologous structures. It agrees with the conserved pattern of interacting amino acid residues. AviRa methylates a specific guanine base within the peptidyltransferase loop of the 23S ribosomal RNA. Guided by the target, the enzyme was docked to the cognate ribosomal surface, where it fit well into a deep cleft without contacting any ribosomal protein. The two additional alpha-helices of AviRa filled a depression in the surface. Since the transferred methyl group of the cofactor is in a pocket beneath the enzyme surface, the targeted guanine base has to flip out for methylation.

Amino Acid Sequence↗

Binding structures and potencies of oxidosqualene cyclase inhibitors with the homologous squalene-hopene cyclase.

The binding structures of 11 human oxidosqualene cyclase inhibitors designed as cholesterol-lowering agents were determined for the squalene-hopene cyclase from Alicyclobacillus acidocaldarius, which is the only structurally known homologue of the human enzyme. The complexes were produced by cocrystallization, and the structures were elucidated by X-ray diffraction analyses. All inhibitors were bound in the large active center cavity. The detailed binding structures are presented and discussed in the light of the IC50 values of these 11 as well as 17 other inhibitors. They provide a consistent picture for the inhibition of the bacterial enzyme and can be used to adjust and improve homology models of the human enzyme. The detailed active center structures of the two enzymes are too different to show an IC50 correlation.

Amines↗

The expression of outer membrane proteins for crystallization.

The production of sufficient amounts of chemically and conformationally homogenous protein is a major requirement for successful crystallization and structure determination. With membrane proteins, this constitutes a particular problem because the membrane volume is limited and the organisms are usually very sensitive to changes in membrane properties brought about by massive protein insertion. Moreover, the extraction of membrane proteins from the membrane with detergents is generally a harsh treatment, which gives rise to conformational aberrations. A number of successful procedures for functional expression followed by purification are reviewed here together with nonfunctional expression into inclusion bodies and subsequent (re)folding to produce functional proteins. Most of the data are for prokaryotic outer membrane proteins, but the outer membrane proteins of eukaryotic organelles are also considered as they do show similar features.

Bacterial Outer Membrane Proteins↗

Structure and catalytic mechanism of the cytosolic D-ribulose-5-phosphate 3-epimerase from rice.

Cytosolic D-ribulose-5-phosphate 3-epimerase from rice was crystallized after EDTA treatment and structurally elucidated by X-ray diffraction to 1.9A resolution. A prominent Zn(2+) site at the active center was established in a soaking experiment. The structure was compared with that of the EDTA-treated crystalline enzyme from the chloroplasts of potato plant leaves showing some structural differences, in particular the "closed" state of a strongly conserved mobile loop covering the substrate at its putative binding site. The previous proposal for the active center was confirmed and the most likely substrate binding position and conformation was derived from the locations of the bound zinc and sulfate ions and of three water molecules. Assuming that the bound zinc ion is an integral part of the enzyme, a reaction mechanism involving a well-stabilized cis-enediolate intermediate is suggested.

Amino Acid Sequence↗

Covalent and three-dimensional structure of the cyclodextrinase from Flavobacterium sp. no. 92.

Starting with oligopeptide sequences and using PCR, the gene of the cyclodextrinase from Flavobacterium sp. no. 92 was derived from the genomic DNA. The gene was sequenced and expressed in Escherichia coli; the gene product was purified and crystallized. An X-ray diffraction analysis using seleno-methionines with multiwavelength anomalous diffraction techniques yielded the refined 3D structure at 2.1 A resolution. The enzyme hydrolyzes alpha(1,4)-glycosidic bonds of cyclodextrins and linear malto-oligosaccharides. It belongs to the glycosylhydrolase family no. 13 and has a chain fold similar to that of alpha-amylases, cyclodextrin glycosyltransferases, and other cyclodextrinases. In contrast with most family members but in agreement with other cyclodextrinases, the enzyme contains an additional characteristic N-terminal domain of about 100 residues. This domain participates in the formation of a putative D2-symmetric tetramer but not in cyclodextrin binding at the active center as observed with the other cyclodextrinases. Moreover, the domain is located at a position quite different from that of the other cyclodextrinases. Whether oligomerization facilitates the cyclodextrin deformation required for hydrolysis is discussed.

Amino Acid Sequence↗

The structure of bacterial outer membrane proteins.

Integral membrane proteins come in two types, alpha-helical and beta-barrel proteins. In both types, all hydrogen bonding donors and acceptors of the polypeptide backbone are completely compensated and buried while nonpolar side chains point to the membrane. The alpha-helical type is more abundant and occurs in cytoplasmic (or inner) membranes, whereas the beta-barrels are known from outer membranes of bacteria. The beta-barrel construction is described by the number of strands and the shear number, which is a measure for the inclination angle of the beta-strands against the barrel axis. The common right-handed beta-twist requires shear numbers slightly larger than the number of strands. Membrane protein beta-barrels contain between 8 and 22 beta-strands and have a simple topology that is probably enforced by the folding process. The smallest barrels form inverse micelles and work as enzymes or they bind to other macromolecules. The medium-range barrels form more or less specific pores for nutrient uptake, whereas the largest barrels occur in active Fe(2+) transporters. The beta-barrels are suitable objects for channel engineering, because the structures are simple and because many of these proteins can be produced into inclusion bodies and recovered therefrom in the exact native conformation.

Bacterial Outer Membrane Proteins↗

Structure of the ecto-ADP-ribosyl transferase ART2.2 from rat.

The mammalian extracellular ADP-ribosyl transferases ART1 through ART5 are sequence-related to each other. Among them ART2 is involved in immuno regulation. The variant ART2.2 was expressed in the periplasm of Escherichia coli and crystallized. Its structure was determined by X-ray diffraction at 1.7A resolution in one crystal form and at slightly lower resolutions in two others. The active center was indicated by a ligated nicotinamide analogue, which also revealed a small induced-fit. The centerpiece of the chainfold of ART2.2 agrees with those of all bacterial ADP-ribosyl transferases. This correspondence and the nicotinamide position were used to model the binding structure of the whole substrate NAD(+) at ART2.2. Two of the bacterial enzymes are structurally more closely related to ART2.2 while the others are more closely related to the eukaryotic poly(ADP-ribosyl)polymerase. This splits the ADP-ribosyl transferases into two distinct subfamilies. A special feature of ART2.2 is its long N-terminal extension and two disulfide bridges that are far away from the active center. They stabilize the protein against denaturation and presumably also against shearing forces parallel with the membrane where ART2.2 is anchored.

ADP Ribose Transferases↗

Expression, purification, crystallization and preliminary X-ray analysis of rat ecto-ADP-ribosyltransferase 2 (ART2.2).

ADP-ribosyltransferases catalyze the transfer of the ADP-ribose moiety from NAD(+) onto proteins and other targets. These enzymes have been found in prokaryotes and in vertebrates; a eukaryotic enzyme structure is not yet known. The enzyme from Rattus norvegicus was expressed in the Escherichia coli periplasm at a level of about 0.2 mg per litre of culture, purified and crystallized. Native data sets were collected to 2.0 A resolution. A self-rotation function revealed a local twofold axis in crystal form A and a Patterson function showed a translational relationship in form B. Form C contains only one molecule in the asymmetric unit.

ADP Ribose Transferases↗

The structure of L-rhamnulose-1-phosphate aldolase (class II) solved by low-resolution SIR phasing and 20-fold NCS averaging.

The enzyme L-rhamnulose-1-phosphate aldolase catalyzes the reversible cleavage of L-rhamnulose-1-phosphate to dihydroxyacetone phosphate and L-lactaldehyde. It is a homotetramer with an M(r) of 30 000 per subunit and crystallized in space group P3(2)21. The enzyme shows a low sequence identity of 18% with the structurally known L-fuculose-1-phosphate aldolase that splits a stereoisomer in a similar reaction. Structure analysis was initiated with a single heavy-atom derivative measured to 6 A resolution. The resulting poor electron density, a self-rotation function and the working hypothesis that both enzymes are C(4) symmetric with envelopes that resemble one another allowed the location of the 20 protomers of the asymmetric unit. The crystal-packing unit was a D(4)-symmetric propeller consisting of five D(4)-symmetric octamers around an internal crystallographic twofold axis. Presumably, the propellers associate laterally in layers, which in turn pile up along the 3(2) axis to form the crystal. The non-crystallographic symmetry was used to extend the phases to the 2.7 A resolution limit and to establish a refined atomic model of the enzyme. The structure showed that the two enzymes are indeed homologous and that they possess chemically similar active centres.

Aldehyde-Lyases↗

Catalytic mechanism of CMP:2-keto-3-deoxy-manno-octonic acid synthetase as derived from complexes with reaction educt and product.

The activation of the sugar 2-keto-3-deoxy-manno-octonic acid (Kdo) is catalyzed by CMP-Kdo synthetase (EC 2.7.7.38) and results in a monophosphate diester with CMP. The enzyme is a pharmaceutical target because CMP-Kdo is required for the biosynthesis of lipopolysaccharides that are vital for Gram-negative bacteria. We have established the structures of an enzyme complex with the educt CTP and of a complex with the product CMP-Kdo by X-ray diffraction analyses at 100 K, both at 2.6 A resolution. The N-terminal domains of the dimeric enzyme bind CTP in a peculiar nucleotide-binding fold with the beta- and gamma-phosphates located at the so-called "PP-loop", whereas the C-terminal domains participate in Kdo binding and in the dimer interface. The unstable nucleotide-sugar CMP-Kdo was produced in a crystal and stabilized by freezing to 100 K. Its formation is accompanied by an induced fit involving mainchain displacements in the 2 A range. The observed binding conformations together with the amino acid conservation pattern during evolution and the putative location of the required Mg(2+) ion suggest a reaction pathway. The enzyme is structurally homologous to the CMP-N-acetylneuraminic acid synthetases in all parts except for the dimer interface. Moreover, the chainfold and the substrate-binding positions resemble those of other enzymes processing nucleotide sugars.

Amino Acid Sequence↗

Autocatalytic peptide cyclization during chain folding of histidine ammonia-lyase.

Histidine ammonia-lyase requires a 4-methylidene-imidazole-5-one group (MIO) that is produced autocatalytically by a cyclization and dehydration step in a 3-residue loop of the polypeptide. The crystal structures of three mutants have been established. Two mutants were inactive and failed to form MIO, but remained unchanged elsewhere. The third mutant showed very low activity and formed MIO, although it differed from an MIO-less mutant only by an additional 329-C(beta) atom. This atom forms one constraint during MIO formation, the other being the strongly connected Asp145. An exploration of the conformational space of the MIO-forming loop showed that the cyclization is probably enforced by a mechanic compression in a late stage of chain folding and is catalyzed by a well-connected internal water molecule. The cyclization of the respective 3-residue loop of green fluorescent protein is likely to occur in a similar reaction.

Binding Sites↗

Crystal structure of a squalene cyclase in complex with the potential anticholesteremic drug Ro48-8071.

Squalene-hopene cyclase (SHC) catalyzes the conversion of squalene into pentacyclic compounds. It is the prokaryotic counterpart of the eukaryotic oxidosqualene cyclase (OSC) that catalyzes the steroid scaffold formation. Because of clear sequence homology, SHC can serve as a model for OSC, which is an attractive target for anticholesteremic drugs. We have established the crystal structure of SHC complexed with Ro48-8071, a potent inhibitor of OSC and therefore of cholesterol biosynthesis. Ro48-8071 is bound in the active-center cavity of SHC and extends into the channel that connects the cavity with the membrane. The binding site of Ro48-8071 is largely identical with the expected site of squalene; it differs from a previous model based on photoaffinity labeling. The knowledge of the inhibitor binding mode in SHC is likely to help develop more potent inhibitors for OSC.

Anticholesteremic Agents↗

Thiol-modifying inhibitors for understanding squalene cyclase function.

The function of squalene-hopene cyclase from Alicyclobacillus acidocaldarius was studied by labelling critical cysteine residues of the enzyme, either native or inserted by site-directed mutagenesis, with different thiol-reacting molecules. The access of the substrate to the active centre cavity through a nonpolar channel that contains a narrow constriction harbouring a cysteine residue (C435) was probed by labelling experiments on both a C435S mutant, lacking C435 of the channel constriction, and a C25S/C50S/C455S/C537S mutant, bearing C435 as the only cysteine residue. Labelling experiments with tritiated 3-carboxy-4-nitrophenyl-dithio-1,1',2-trisnorsqualene (CNDT-squalene) showed that the cysteine residue at the channel constriction was covalently modified by the squalene-like inhibitor. Time-dependent inactivation of the C25S/C50S/C455S/C537S mutant by a number of squalene analogues and other agents with thiol-modifying activity suggested that modifying C435 caused the obstruction of the channel constriction thus blocking access of the substrate to the active site. The tryptic fragment comprising C435 of the quadruple mutant labelled with the most effective inhibitor had the expected altered molecular mass, as determined by LC-ESI-MS measurements. The arrangement of the substrate in the active site cavity was studied by using thiol reagents as probes in labelling experiments with the double mutant D376C/C435S in which D376, supposedly the substrate-protonating residue, was substituted by cysteine. The inhibitory effect was evaluated in terms of the reduced ability to cyclize oxidosqualene, as the mutant is unable to catalyse the reaction of squalene to hopene. Among the inhibitors tested, the substrate analogue squalene-maleimide proved to be a very effective time-dependent inhibitor.

Amino Acid Substitution↗

Structures of two histidine ammonia-lyase modifications and implications for the catalytic mechanism.

Histidine ammonia-lyase (EC 4.3.1.3) catalyzes the nonoxidative elimination of the alpha-amino group of histidine using a 4-methylidene-imidazole-5-one (MIO), which is formed autocatalytically from the internal peptide segment 142Ala-Ser-Gly. The structure of the enzyme inhibited by a reaction with l-cysteine was established at the very high resolution of 1.0 A. Five active center mutants were produced and their catalytic activities were measured. Among them, mutant Tyr280-->Phe could be crystallized and its structure could be determined at 1.7 A resolution. It contains a planar sp2-hybridized 144-N atom of MIO, in contrast to the pyramidal sp3-hybridized 144-N of the wild-type. With the planar 144-N atom, MIO assumes the conformation of a putative intermediate aromatic state of the reaction, demonstrating that the conformational barrier between aromatic and wild-type states is very low. The data led to a new proposal for the geometry for the catalyzed reaction, which also applies to the closely related phenylalanine ammonia-lyase (EC 4.3.1.5). Moreover, it suggested an intermediate binding site for the released ammonia.

Binding Sites↗